Feedback

MS Dasgupta

Publications

JOURNALS

  1. S. Jain, A. Bharadwaj and A. Sharma, "Spatially Arranged Relay Coils to Improve the Misalignment Tolerance at an Enhanced Transfer Distance," in IEEE Transactions on Antennas and Propagation, vol. 72, no. 3, pp. 2171-2180, March 2024, doi: 10.1109/TAP.2024.3352234. (IF-4.6) Q1
  2. A. Bharadwaj, A. Sharma and C. C. Reddy, "Analytical Framework of S-Parameter-Based Efficiency for Secondary-Parallel Compensation WPT System to Authenticate Data Using VNA," in IEEE Transactions on Instrumentation and Measurement, vol. 72, pp. 1-10, 2023, Art no. 8001010, doi: 10.1109/TIM.2023.3240224. (IF-5.6) Q1
  3. A. Bharadwaj, A. Sharma and C. R. Chandupatla, "A Switched Modular Multi-Coil Array Transmitter Pad With Coil Rectenna Sensors to Improve Lateral Misalignment Tolerance in Wireless Power Charging of Drone Systems," in IEEE Transactions on Intelligent Transportation Systems, vol. 24, no. 2, pp. 2010-2023, Feb. 2023, doi: 10.1109/TITS.2022.3220793. (IF-7.9) Q1
  4. A. Bharadwaj, V. K. Srivastava, A. Sharma and C. C. Reddy, "A Tilted-Orthogonal Receiver Coil Antenna to Improve Misalignment Tolerance in WPT Systems," in IEEE Transactions on Antennas and Propagation, vol. 70, no. 12, pp. 11434-11441, Dec. 2022, doi: 10.1109/TAP.2022.3209207. (IF-4.6) Q1
  5. A. Bharadwaj, A. Sharma and C. C. Reddy, "An Unconventional Measurement Technique to Estimate Power Transfer Efficiency in Series–Series Resonant WPT System Using S-Parameters," in IEEE Transactions on Instrumentation and Measurement, vol. 71, pp. 1-9, 2022, Art no. 8004009, doi: 10.1109/TIM.2022.3181291. (IF-5.6) Q1
  6. V. K. Srivastava, A. Bharadwaj and A. Sharma, "A Multicoil Array Transceiver Antenna Design for Touchless Hygienic Artificial Human Interfacing," in IEEE Transactions on Antennas and Propagation, vol. 70, no. 10, pp. 8911-8921, Oct. 2022, doi: 10.1109/TAP.2022.3177534. (IF-4.6) Q1
  7. A. Bharadwaj, A. Sharma and C. C. Reddy, "A Multi-Turn Coil Antenna With Nonuniform Clustered Turns Optimized Using Q-Assisted MMSE Procedure to Enhance Misalignment Tolerance in WPT Systems," in IEEE Transactions on Antennas and Propagation, vol. 70, no. 7, pp. 5302-5311, July 2022, doi: 10.1109/TAP.2022.3146433. (IF-4.6) Q1
  8. V. K. Srivastava, A. Sharma and A. Bharadwaj, "A Planar Distributed Multicoil Antenna to Generate 3-D Ellipsoidally Polarized H-Field for Angular Misalignment Tolerant WPT System," in IEEE Transactions on Antennas and Propagation, vol. 70, no. 4, pp. 2969-2978, April 2022, doi: 10.1109/TAP.2021.3137477. (IF-4.6) Q1
  9. A. Bharadwaj, V. K. Srivastava, A. Sharma and C. C. Reddy, "A Switchable Multicoil Antenna With Booster Coil to Improve Coverage in WPT Systems," in IEEE Transactions on Antennas and Propagation, vol. 70, no. 4, pp. 2490-2498, April 2022, doi: 10.1109/TAP.2021.3137379. (IF-4.6) Q1
  10. A. Sharma, A. Bharadwaj and V. K. Srivastava, "An Analytical Framework to Design Planar Transmitting Array Antennas to Mitigate Lateral Misalignment in Wireless Power Transfer Systems," in IEEE Transactions on Antennas and Propagation, vol. 69, no. 9, pp. 5559-5569, Sept. 2021, doi: 10.1109/TAP.2021.3069518. (IF-4.6) Q1

CONFERENCES

  1. V. K. Srivastava, A. Bharadwaj and A. Sharma, "A Planar Distributed Receiver Coil Antenna Array to Encapsulate Vertical and Lateral H-Fields for Drone Wireless Charging," 2023 17th European Conference on Antennas and Propagation (EuCAP), Florence, Italy, 2023, pp. 1-5, doi: 10.23919/EuCAP57121.2023.10133370.
  2. A. Bharadwaj, V. K. Srivastava, C. C. Reddy and A. Sharma, "Design Methodology of Near-Field Transmitter Coil Antenna for Maximizing Efficiency of the WPT System," 2023 17th European Conference on Antennas and Propagation (EuCAP), Florence, Italy, 2023, pp. 1-5, doi: 10.23919/EuCAP57121.2023.10133726.
  3. A. Bharadwaj, V. K. Srivastava, A. Sharma and C. C. Reddy, "A Novel Trapezoidal Multi-Coil Antenna for Wireless Charging of Electric Vehicles," 2020 IEEE 15th International Conference on Industrial and Information Systems (ICIIS), RUPNAGAR, India, 2020, pp. 13-17, doi: 10.1109/ICIIS51140.2020.9342635.
  4. V. K. Srivastava, A. Sharma and A. Bharadwaj, "A Magnetic Resonance Coupling Based Touchless Pad for Human-Computer Interfacing," 2020 IEEE 15th International Conference on Industrial and Information Systems (ICIIS), RUPNAGAR, India, 2020, pp. 601-605, doi: 10.1109/ICIIS51140.2020.9342687.

Publications

Sl No

Publication

 

2023

52

S V V S Narayana Pichika, V Kasam, Sabareesh G R, Aruna Malapati, “Automatic signal denoising and multi-component fault classification based on deep learning using integrated condition monitoring in a wind turbine gearbox, ", Journal of Vibration Engineering and Technologies, (Accepted)

51

B Upendra, B Panigrahi, K Singh, GR Sabareesh, “On exploiting the transition of nonlinear characteristics of a broadband piezoelectric energy harvester for tuning it to low and high-frequency applications”, Mechanics of Advanced Materials and Structures, Available online from Nov 2023

50

S.N.Das, Rekha Bahoji, Murtaza Bohra, Sabareesh GR, Y V D Rao, “Influence of cell parameters in local resonators based metamaterials”, Journal of Brazilian Society of Mechanical Engineers, Vol 45(12), pp 614

49

B Upendra, B Panigrahi, K Singh, GR Sabareesh, “ Recent advancements in piezoelectric energy harvesting for implantable medical devices” , Journal of Intelligent Material Systems and Structures, 35(2), 129-155

48

Kush Dwivedi, S.N.Das, Sabareesh G R, Experimental and numerical investigation on effects of viscoelastic rubber and local resonator mass on broadband vibration attenuation in acoustic-metamaterial plates, Journal of Intelligent Materials Systems and Structures, 34(16),2947-2958, (IF: 2.734)

47

Basil Cardoz; Haris Naiyer E Azam Shaikh; Shoaib Munir Mulani; Ashwani Kumar; Sabareesh G R, Random forests based classification of tool wear using vibration signals and wear area estimation from tool image data, International Journal of Advanced Manufacturing Technology, (Accepted), (IF: 3.563)

46

B Upendra, B Panigrahi, Sabareesh G R, “Effect of geometric non-linearity and tip mass on the frequency bandwidth of a cantilever piezoelectric energy harvester under tip excitation” Physica Scripta, 98(6), (IF: 3.08)

45

Yang Hanzhang, Cao Jinxin Cao Shuyang, Sabareesh.G.R, Experimental study on wind load characteristics of TTU benchmark building model exposed to tornado-like vortices, Journal of Building Structures (Chineese version), Accepted

 

2022

44

SN Pichika, G Meghana, Sabareesh Geetha Rajasekharan, Aruna Malapati, Multi-component fault classification of a wind turbine gearbox using integrated condition monitoring and hybrid ensemble method approach  Applied Acoustics, (Accepted), (IF: 3.614)

43

Nivedan Vishwanath, Aditya K. Saravanakumar, Kush Dwivedi, Kalluri R.C. Murthy, Pardha S.Gurugubelli, Sabareesh G. Rajasekharan, “ 3D Numerical investigation of a rounded corner square cylinder for supercritical flows” Wind and Structures, Vol 35(1), pp 55-66, (IF: 1.729)

42

Limbadri, K. P Wankhede, Suresh K, S K Singh, Sabareesh G R, “Flow Stress Modeling of Tube and Slab Route Sheets of Zircaloy-4 Using Machine Learning Techniques and Arrhenius Type Constitutive Equations” Journal of Materials Engineering and Performance, Available online (I.F: 2.036)

41

Hemanth M Praveen, G R Sabareesh, V Inturi, A Jaikanth, Component level signal segmentation method for multi-component fault detection in a wind turbine gearbox, Measurement (Accepted), (IF: 3.927)

40

I Vamsi, Hemanth M P, Pavan Kumar, G R SabareeshDamage monitoring of pultruded GFRP composites using wavelet transform of vibration signals, Measurement (Accepted), (IF: 3.927)

39

I Vamsi , B Sai Venkatesh, G Praharshitha, P Brahmini Priya, G R Sabareesh, Vikram Pakrashi, An integrated condition monitoring scheme for health state identification of a multi-stage gearbox through Hurst exponent estimates, Structural Health Monitoring,  (Accepted), (I.F : 5.71)

38

SN Pichika, R Yadav, Sabareesh Geetha Rajasekharan, Hemanth Mithun Praveen, Vamsi Inturi, Optimal sensor placement for identifying multi-component failures in a wind turbine gearbox using integrated condition monitoring scheme. Applied Acoustics, Vol 187, Feb 2022, (IF: 3.614)

37

Inturi V, P K Penumakala, G R Sabareesh, "Effect of multiple defects and multi-component failure on the dynamic behaviour of a wind turbine gear box, Arabian Journal for Science and Engineering, 1-15, Jan 2022 (Available Online) (IF: 2.334)

36

Nachiket,, A. Siddhant, A. Sahane, O, Sabareesh G R, “Estimation of dynamic characteristics of a wind turbine blade” Materials Today proceedings (Available online)

 

2021

35

A K Verma, I Vamsi, P Saurabh, R Sudha, G R Sabareesh, S Rajkumar, (2021)"Wavelet and deep learning based detection of SARS-nCOV from thoracic X-ray images for rapid and efficient testing, Expert Systems with Applications, Vol 185, (IF: 6.954)

34

Hemanth Mithun Praveen, G R Sabareesh, (2021), Wavelet Based Real-time planetary gearbox health monitoring under non-stationary operation, Experimental Techniques, Available online (Since Oct 2021), (IF: 1.16)

33

S Das, M Bohra, Sabareesh Geetha Rajasekharan, YVD Rao, (2021),Investigations on the band-gap characteristics of one-dimensional flexural periodic structures with varying geometries, Journal of Vibration and Control, Available online since June 2021 (IF: 3.095)

32

Vamsi Inturi, N Shreyas, GR Sabareesh, (2021) Anfis-Based Defect Severity Prediction on a Multi-Stage Gearbox Operating Under Fluctuating Speeds, Neural Processing Letters, (Available Online) (IF: 2.908)

31

Vamsi Inturi, S Pratyush, GR Sabareesh, (2021) Detection of Local Gear Tooth Defects on a Multistage Gearbox Operating Under Fluctuating Speeds Using DWT and EMD Analysis, Arabian Journal for Science and Engineering, 1-10, June 2021 (Available Online) (IF: 2.334)

30

Hemanth Mithun Praveen, Akshay Jaikanth, Vamsi I, Sabareesh G R, (2021) "Fingerprinting based data abstraction technique for remaining useful life estimation in a multi-stage gearbox". Measurements , Vol 174, (IF: 3.927)

29

Inturi. V,  N Shreyas, K Chetti, G R Sabareesh (2021), Comprehensive fault diagnostics of wind turbine gearbox through adaptive condition monitoring scheme", Applied Acoustics, Vol 174 (IF:2.639)

28

K Shruti, SR Govindray, SG Rajasekharan, PN Rao (2021), Estimation of wind pressure coefficients on multi-building configurations using data-driven approach, Wind and Structures, Vol 32 (2), 127-142 (IF:2.47)

27

V Inturi, GR Sabareesh, K Supradeepan, PK Penumakala, (2021), Principal component analysis based gear fault diagnostics in different stages of a multi-stage gearbox subjected to extensive fluctuating speeds, Journal of Nondestructive Evaluation, Diagnostics and Prognostics of Engineering

26

K Shruti, SR Govindray, SG Rajasekharan, PN Rao (2021), Artificial Neural Network-Based Prediction of Wind Pressure Coefficients on Buildings, Journal of The Institution of Engineers (India): Series A, 102(2),403-409

25

B Upendra, B Panigrahi, K Singh, G R Sabareesh (2021), Numerical investigation on dynamic stability of a pick and place robot arm, Adv in industrial machines and mechanisms, Lecture Notes in Mechanical Engg, Springer, pp 587-596

 

2020

24

Sachchidanand Das., Kush Dwivedi., Sabareesh Geetha Rajasekharan., Yendluri Venkata Daseswara Rao(2020), "Vibration attenuation and bandgap characteristics in plates with periodic cavities", Journal of Vibration and Control, Available online (IF:2.169)

23

I.Vamsi, G.R.Sabareesh, P.K.Penumakala, (2020) "Bearing Fault Severity Analysis on a multi-stage gearbox subjected to fluctuating speeds", Experimental Techniques, Vol 44, pp 541-552 (IF:1.058)

22

Shruti K, Sabareesh Geetha Rajasekharan,P N K Rao, (2020), "Wind induced interference effects on two, three and four building configuration" International Journal of Structural Engineering, Vol 11(3)

 

2019

21

I.Vamsi, G.R.Sabareesh, P.K.Penumakala, (2019) "Comparison of condition monitoring                      techniques in assessing fault severity for a wind turbine gearbox under non-stationary loading", Mechanical Systems and Signal Processing,Vol 124, 1-20 Elsevier. (IF:6.471)

20

I.Vamsi, G.R.Sabareesh,Supradeepan. K, P.K.Penumakala,(2019) "Integrated Condition Monitoring Scheme for Bearing Fault Diagnosis of a Wind Turbine Gearbox", Journal of Vibration and Control, Vol 25(12), 1852-1865, SAGE, (IF:2.169)

19

Hemanth Mithun Praveen, Tejas, Sabareesh G R, (2019), Automated fault detection of wind turbine gear box using data driven approach, International Journal of Prognostics and Health Management, Vol 10(1), 1-12.

18

K Shruti, S Rajesh, GR Sabareesh, PN Rao, (2019), Study of Interference Effects on Chimneys, Journal of Physics: Conference Series 1276(1).

17

Vamsi Inturi., Karthick Chetti., Shreyas N., Sabareesh Geetha Rajasekharan(2019), Hyperparameter optimization for enabling multi-level feature classification in a wind turbine gearbox, Vibroengineering Procedia, Vol 29, pp 24-30.

16

Hemanth Mithun Praveen., Divya Shah., Krishna Dutt Pandey., Vamsi I., Sabareesh Geetha Rajasekharan(2019), PCA based health indicator for remaining useful life prediction of wind turbine gearbox Vibroengineering Procedia, Vol 29, pp 31-36.

15

Sreeram Rajesh, K Shruti, Sabareesh.G.R, P.N.Rao, (2019), Study of interference effects of wind turbine structures, Journal of Energy and Environmental Sustainability, , Vol 8, Page: 49

14

Sabareesh G R, Masahiro Matsui, Yukio Tamura, (2019), "Vulnerability of roof and building walls under a translating tornado like vortex", Frontiers in Built Environment , 5 (53).  

13

V.Inturi, G.R.Sabareesh, V. Sharma, (2019) "Integrated Vibro-Acoustic Analysis and Empirical Mode Decomposition for Fault Diagnosis of Gears in a Wind Turbine", Procedia Structural Integrity, 14, 937-944

12

Shruti K, RaoP.N., Sabareesh G R (2019) Across Wind Load Analysis using CFD for sustainable design of tall structures, Advances and Challenges in Structural Engineering, Geomast 2018. Sustainable Civil Infrastructures, Springer, Cham

 

2018

11

V.N.Balavignesh,G.Bharadwaj, G.R.Sabareesh, I.Vamsi (2018)  “Comparison of conventional method of fault determination with data-driven approach for ball bearings in a wind turbine gearbox", International Journal of Performability Engineering , Vol 14(3), 397-412

10

G.R.Sabareesh, Shuyang Cao, Jin Wang, Masahiro Matsui, Yukio Tamura, (2018)“Effect of building proximity on external and internal pressures under tornado-like flow”, Wind and Structures, Vol 26(3), 163-177

 

2016

9

SailenduBiswal, Jithin Donny George, G R Sabareesh, (2016) “Fault size estimation using vibration signatures in a wind turbine test-rig”, Procedia Engineering,Vol 144, 305-311, Elsevier Publication 

8

Nikhil.T, Sagar I, Chaitanya C, Chandrahas.T, Sabareesh G R, (2016), “Design and development of a test-rig for determining vibration characteristics of a beam,” Procedia Engineering,Vol 144, 312-320, Elsevier Publication.

 

Before 2015

7

Geetha Rajasekharan Sabareesh, Masahiro Matsui , Yukio Tamura,(2013) “ Ground roughness effects on internal pressure characteristics for buildings exposed to tornado-like flow”, Journal of Wind Engineering & Industrial aerodynamics, Vol 122, pp 113-117.(IF: 2.739)

6

Geetha Rajasekharan  Sabareesh, Masahiro Matsui , Yukio Tamura (2013), “Characteristics of internal pressure and resulting roof wind force in tornado-like flow”, Journal of Wind Engineering & Industrial aerodynamics, Vol 112, pp 52-57. (IF: 2.739)

5

GeethaRajasekharan Sabareesh, Masahiro Matsui , Yukio Tamura,(2012) “ Dependence of surface pressures on a cubic building in tornado like flow on building location and ground roughness”, Journal of Wind Engineering & Industrial aerodynamics, Vol103,pp 50-59. (IF: 2.739)

4

GeethaRajasekharan Sabareesh, Masahiro Matsui , Yukio Tamura,(2011) “ Characteristics of surface pressures on a building under a tornado-like flow at different swirl ratios”, Journal of Wind and Engineering, Vol8(2), 30-40.

3

G.R.Sabareesh, Masahiro Matsui , Yukio Tamura,(2012), “Experimental investigation of external and internal pressures acting on building models in tornado-like flow”, Wind Effects Bulletin, Vol17, 22-25.

2

S.Radhika, G.R.Sabareesh, G.Jagadanand, V.Sugumaran, (2010), Precise wavelet for current signature in 3Φ IM, Journal of Expert Systems with Applications, Vol37 (1), 450-455, Elsevier Publication. (IF: 5.452)

1

V.Sugumaran, G.R.Sabareesh, K.I.Ramachandran,(2008) “Fault diagnostics of roller bearing using kernel based neighborhood score multi-class support vector machine, Journal of Expert Systems with Applications, Vol34(4),3090-3098, Elsevier Publication. (IF: 5.452)


Publications

 

Peer-reviewed Publications: https://scholar.google.com/citations?user=iKI8S8gAAAAJ&hl=en

16. Chandrasekar, B., Wanke, A., Wawra, S., Saake, P., Mahdi, L., Charura, N., Neidert, M., Malisic, M., Thiele, M., Dama, M., Pauly, M., and Zuccaro, A. (2022). Fungi hijack a plant apoplastic endoglucanase to release a ROS scavenging β-glucan decasaccharide to subvert immune responses. (The Plant Cellin press, Impact factor 11.28)
 
 
American Society of Plant Biologist (ASPB), Plant Science Research Weekly  : https://plantae.org/fungal-exopolysaccharide-regulates-plant-microbe-interaction-plant-cell/
 
Profile hightlight, American Society of Plant Biologist (ASPB) : https://plantae.org/balakumaran-chandrasekar-the-plant-cell-first-author/ 
 

15. Sang-Jin Kim , Chandrasekar, B, Anne C. Rea , Linda Danhof , Starla Zemelis-Durfee , Nicholas Thrower , Zachary S. Shepard , Markus Pauly , Federica Brandizzi , Kenneth Keegstra. The synthesis of xyloglucan, an abundant plant cell wall polysaccharide, requires CSLC function, 2020, PNAS (Impact factor, 9.4)

14. Pierre Buscaill, Chandrasekar, B, Nattapong Sanguankiattichai, Jiorgos Kourelis, Farnusch Kaschani, Emma L. Thomas, Kyoko Morimoto, Markus Kaiser, Gail M. Preston, Yuki Ichinose and Renier A. L. van der HoornGlycosidase and flagellin glycan polymorphism control hydrolytic release of immunogenic peptides, 2019, Science, 364 (6436) (Impact factor, 41.8)

13. Poret, M., Chandrasekar, B., van der Hoorn, R.A.L., Déchaumet, S., Bouchereau, A., Kim, T.-H., Lee, B.-R., Macquart, F., Hara-Nishimura, I., and Avice, J.-C. (2019). A Genotypic Comparison Reveals That the Improvement in Nitrogen Remobilization Efficiency in Oilseed Rape Leaves Is Related to Specific Patterns of Senescence-Associated Protease Activities and Phytohormones. Front. Plant Sci10

12. Husaini, A.M., Morimoto, K., Chandrasekar, B., Kelly, S., Kaschani, F., Palmero, D., Jiang, J., Kaiser, M., Ahrazem, O., Overkleeft, H.S., et al. (2018). Multiplex fluorescent, activity-based protein profiling identifies active α-glycosidases and other hydrolases in plants. Plant Physiol. pp.00250.2018.

11. Poret, M., Chandrasekar, B., van der Hoorn, R.A.L., Coquet, L., Jouenne, T., and Avice, J.-C. (2017). Proteomic Investigations of Proteases Involved in Cotyledon Senescence: A Model to Explore the Genotypic Variability of Proteolysis Machinery Associated with Nitrogen Remobilization Efficiency during the Leaf Senescence of Oilseed Rape. Proteomes 5.

10. Santos, R.B., Chandrasekar, B., Mandal, M.K., Kaschani, F., Kaiser, M., Both, L., van der Hoorn, R.A.L., Schiermeyer, A., and Abranches, R. (2018). Low Protease Content in Medicago truncatula Cell Cultures Facilitates Recombinant Protein Production. Biotechnol. J.

9. Chandrasekar, B., Hong, T.N and Van der Hoorn, R.A.L. (2017). Inhibitor discovery by convolution Activity-Based Protein Profiling (ABPP) Methods in Molecular Biology 1491, 47-56

8. Chandrasekar, B and Van der Hoorn, R.A.L. (2016). Beta galactosidases in Arabidopsis and tomato - a mini review. Biochemical society transactions 44(1), 150-158.

7. Daneri-Castro, S.N., Chandrasekar, B., Grosse-Holz, F.M., Van der Hoorn, R.A.L., Roberts, T.H. (2016). Activity-based protein profiling of hydrolytic enzymes induced by gibberellic acid in isolated aleurone layers of malting barley. FEBS letters 590 (17), 2956-62

6. Stiti, N., Chandrasekar, B., Strubl, L., Bartels, D and Van der Hoorn, R.A.L. (2016) Nicotinamide Cofactors Suppress Active-site Labeling of Aldehyde Dehydrogenases. ACS Chemical Biology 11 (6), 1578–1586.

5. Poret, M., Chandrasekar, B., Van der Hoorn, R.A.L and Avice, J.C. (2016). Characterization of senescence-associated protease activities involved in the efficient protein remobilization during leaf senescence of winter oilseed rape. Plant Science 246, 139-53.

4. Lu, H., Chandrasekar, B., Oeljeklaus, J., Misas-Villamil, J.C., Wang, Z., Shindo, T., Bogyo, M., Kaiser, M., and Van der Hoorn, R.A.L. (2015). Subfamily-specific Fluorescent Probes for Cys proteases Display Dynamic Protease Activities During Seed Germination. Plant Physiol. pp.114.254466.

3. Chandrasekar, B., Colby, T., Emon, A.E.K., Jiang, J., Hong, T.N., Villamor, J.G., Harzen, A., Overkleeft, H.S., and Van der Hoorn, R.A.L. (2014). Broad-range Glycosidase Activity Profiling. Mol. Cell. Proteomics 13, 2787–2800.

2. Ulker, B., Hommelsheim, C.M., Berson, T., Thomas, S., Chandrasekar, B., Olcay, A.C., Berendzen K.W., Frantzeskakis, L. (2012) Reevaluation of the reliability and usefulness of the somatic homologous recombination reporter lines. Plant Cell 24: 4314-4323.

1. Vichangal, P.S.K., Raja, K., Natarajan, S., Srinivasan, N., and Chandrasekar, B (2011) Molecular Docking Study on the anti-inflammatory effect of Osthol and its derivatives towards human p38alpha MAP kinase International Journal of Bioinformatics 4: 1-9


Publications

 

Publications_Syamantak

 

Publications (Google Scholar h-index 24, i-10 index 42)

 

58. Thakar S, Bhattacharya R, Katakia YT, Chakraborty S, Ramakrishnan S, Pandya Thakkar N, Dey S, Chowdhury S, Majumder S. Regulation of shelterin proteins TERF2IP and TRF2 by H3K4me3-p65 axis drives hyperglycemia dependent endothelial senescence. bioRxiv 2023.05.12.540614; doi: https://doi.org/10.1101/2023.05.12.540614. (Preprint)

 

57. Gomes GN, Thieme K, Majumder SMorais MRPT. Editorial: Epigenetic, molecular and programming mechanisms of renal physiology and pathophysiology. Frontiers in Physiology. 2023 Feb 10;14:1158436. (Impact factor: 4.755)

 

56. Akhouri V, Majumder SGaikwad AB. The emerging insight into E3 ligases as the potential therapeutic target for diabetic kidney disease. Life Sciences. 2023 May 15;321:121643. (Impact factor: 6.78)

 

55. Katakia YT, Kanduri S, Bhattacharyya R, Ramanathan S, Nigam I, Kuncharam BVR, Majumder S. Angular difference in human coronary artery governs endothelial cell structure and function. Communication Biology, 2022 2022 Oct 1;5(1):1044. (Impact factor: 6.548)

 

54. Sharma S, Madhyastha H, Kirwale SS, Sakai K, Katakia YT, Majumder S, Roy A. Dual antibacterial and anti-inflammatory efficacy of a chitosan-chondroitin sulfate-based in-situ forming wound dressing. Carbohydrate Polymer, 2022 15;298:120126. (Impact factor: 10.723)

 

53. Singh H, Khadanga S, Goel SK, Majumder S, Baig MS, Bhatia V, Chaudhary N, Saluja R. Evaluation of Interleukin-33 and sST2 levels in type-2 diabetic mellitus patients with or without metabolic syndrome. 2023 Indian Journal of Medical Research 157(5):p 470-476. (Impact factor: 5.274)

 

52. Pandya-Thakkar N, Pereira BMV, Katakia YT, Ramakrishnan SK, Thakar S, Sakhuja A, Rajeev G, S Soorya, Thieme K, Majumder S. Elevated H3K4me3 through MLL2-WDR82 upon hyperglycemia causes Jagged ligand dependent Notch activation to interplay with differentiation state of endothelial cells. Frontiers in Cell and Developmental Biology, 2022 22;10:839109. (Impact factor: 6.081)

 

51. Thakar S, Katakia YT, Ramakrishnan S, Pandya-Thakkar N, Majumder S. Intermittent high glucose elevates nuclear localization of EZH2 to cause H3K27me3 dependent repression of KLF2 leading to endothelial inflammation. Cells, 2021 26;10(10):2548. (Impact factor: 7.66)

 

50. Katakia YT, Pandya-Thakkar N, Thakar S, Sakhuja A, Goyal R, Sharma H, Dave R, Mandloi A, Basu S, Nigam I, Kuncharam BVR, Chowdhury S, Majumder S. Dynamic alterations of H3K4me3 and H3K27me3 at ADAM17 and Jagged-1 gene promoters cause inflammatory switch of endothelial cells. Journal of Cellular Physiology, 2022;237(1):992-1012. (Impact factor: 6.513)

 

49. Kachwal V, Srivastava A, Thakar S, Zubiria-Ulacia M, Gautam D, Majumder S, Venkatesh KP, Casanova D, Chowdhury R, Rath N, Mukherjee S, Alemany P, Laskar IR. Engineering a light-driven cyanine based double molecular rotor to enhance the sensitivity towards the viscous medium. Material Advances, Mater. Adv., 2021,2, 4804-4813. (Impact Factor: 5.0)

 

48. Pereira BMV, Katakia YT, Majumder S, Thieme K. Unraveling the epigenetic landscape of glomerular cells in kidney disease. J Mol Med (Berl). 2021 Jun;99(6):785-803. (Impact Factor: 5.606)

 

47. Niveditha D, Jasoria M, Narayan J, Majumder S, Mukherjee S, Chowdhury R, Chowdhury S.Common and Unique microRNAs in Multiple Carcinomas Regulate Similar Network of Pathways to Mediate Cancer Progression. Sci Rep 2020, 10 (1), 2331. (Impact Factor: 4.996)

 

46. Niveditha D, Sharma H, Majumder S, Mukherjee S, Chowdhury R and Chowdhury S. Transcriptomic analysis associated with reversal of cisplatin sensitivity in drug resistant osteosarcoma cells after a drug holiday. BMC Cancer 2019 Nov 5;19(1):1045. (Impact Factor: 4.638)

 

45. Niveditha D, Sharma H, Sahu A, Majumder S, Chowdhury R and Chowdhury S. Drug Tolerant Cells: An Emerging Target With Unique Transcriptomic Features. Cancer Informatics; 2019; 18:1-5. (Impact Factor: 2.06)

 

44. Majumder S, Hadden MJ, Thieme K, Batchu SN, Niveditha D, Chowdhury S, Yerra VG, Advani SL, Bowskill BB, Liu Y, Vakili H, Alghamdi TA, White KE, Geldenhuys L, Siddiqi FS, Advani A. Dysregulated expression but redundant function of the long non-coding RNA Hotair in diabetic kidney disease. Diabetologia 2019 62(11):2129-2142. (Impact Factor: 10.46(Cover page of Diabetologia Volume 62, Issue 11, November 2019)

 

43. Siamwala JH, Kumar P, Veeriah V, Muley A, Rajendran S, Konikkat S, Majumder S, Mani KP, Chatterjee S. Nitric Oxide Reverses the Position of the Heart during Embryonic Development. Int J Mol Sci. 2019 Mar 7;20(5). (Impact Factor: 6.208)

 

42. Niveditha D, Mukherjee S, Majumder S, Chowdhury R and Chowdhury S. A global transcriptomic pipeline decoding core network of genes involved in stages leading to acquisition of drug-resistance to cisplatin in osteosarcoma cells. Bioinformatics; 2019 May 15;35(10):1701-1711. (Impact Factor: 6.931)

 

41. Alghamdi TA, Batchu SN, Hadden M, Yerra VG, Liu Y, Bowskill B, Advani, S, Geldenhuys L, Siddiqi F, Majumder S, Advani A. Histone H3 serine 10 phosphorylation facilitates endothelial activation in diabetic kidney disease. Diabetes, 2018 Dec;67(12):2668-2681. (Impact Factor: 9.337)

 

40. Batchu SN, Thieme K, Zadeh F, Alghamdi TA, Yerra VG, Hadden M, Majumder S, Kabir MG, Bowskill BB, Ladha D, Gramolini A, Connelly KS, Advani A. The dipeptidyl peptidase-4 substrate CXCL12 has opposing cardiac effects in young mice and aged diabetic mice mediated by Ca2+ flux and phosphoinositide-3 kinase γ. Diabetes, 2018 Nov;67(11):2443-2455. (Impact Factor: 9.337)

 

39. Brijmohan AS, Batchu SN, Majumder S, Alghamdi TA, Thieme K, McGaugh S, Liu Y, Advani SL, Bowskill BB, Kabir MG, Geldenhuys L, Siddiqi F, Advani A. HDAC6 inhibition promotes transcription factor EB activation and is protective in experimental kidney disease. Front Pharmacol2018 Feb 1;9:34. (Impact Factor: 5.988)

 

38. Majumder S#, Thieme K#, Batchu SN, Alghamdi TA, Bowskill BB, Kabir MG, Liu Y, Advani SL, White KE, Geldenhuys L, Tennankore KK, Poyah P, Siddiqi FS, Advani A. Shifts in podocyte histone H3K27me3 regulate mouse and human glomerular disease. J Clin Invest. 2018 Jan 2;128(1):483-499. # contributed equally. (Impact Factor: 19.456)

Highlighted on the front cover of May 2019 Kidney News published by American Society of Nephrology.

(https://www.asn-online.org/publications/kidneynews/archives/2019/KN_2019_05_may.pdf)

Highlighted as one of the significant publication of 2018 in the “Year in Review” under diabetic kidney disease section of the Nature Reviews Nephrology (https://www.nature.com/articles/s41581-018-0092-5)

Highlighted in Nature Reviews Nephrology (https://www.nature.com/articles/nrneph.2018.1)

Highlighted in the Journal Club section of Kidney International

(https://www.kidney-international.org/article/S0085-2538(18)30137-6/fulltext)

Spotlighted by European Renal Association-European Dialysis and Transplant Association(https://enp-era-edta.org/article/276)

 

37. Rajasekeran H, Reich HN, Hladunewich MA, Cattran D, Lovshin JA, Lytvyn Y, Bjornstad P, Lai V, Tse V, Cham L, Majumder S, Bowskill BB, Kabir MG, Advani SL, Gibson IW, Sood MW, Advani A, Cherney DZI. Dapagliflozin in Focal Segmental Glomerulosclerosis: A Combined Human-Rodent Pilot Study. Am J Physiol Renal Physiol. 2018 Mar 1;314(3):F412-F422. (Impact Factor: 3.377)

 

36. Alghamdi TA, Majumder S, Thieme K, Batchu SN, White KE, Liu Y, Brijmohan AS, Bowskill BB, Advani SL, Woo M, Advani A. JAK2 regulates transcription factor EB expression and autophagy completion in glomerular podocytes. J Am Soc Nephrol. 2017 Sep;28(9):2641-2653. (Impact Factor: 14.978)

 

35. Thieme K, Majumder S, Brijmohan AS, Batchu SN, Bowskill BB, Alghamdi TA, Advani SL, Kabir MG, Liu Y, Advani A. EP4 inhibition attenuates the development of diabetic and non-diabetic experimental kidney disease. Sci Rep 2017 Jun 13;7(1):3442. (Impact Factor: 4.996)

 

34. Gajalakshmi P, Majumder S, Viebahn CS, Yeoh GC, Chatterjee S (2016) Interleukin 6 Secreted by bipotential murine oval liver stem cells induces apoptosis of activated hepatic stellate cells by activating NF-κb-inducible nitric oxide synthase signaling. Biochem. Cell Biol. 2017 Apr;95(2):263-272. (Impact Factor: 3.73)

 

33. Majumder S, Advani A. VEGF and the diabetic kidney: more than too much of a good thing. J Diabetes Complications. 2017 Jan;31(1):273-279. (Impact Factor: 3.219)

 

32. Majumder S#Zhu G#, Xu X, Jiang D, Liu H, Xue C, Wang X, Coia H, Cui Z, Sowden M, Smolock EM, Libby RT, Berk BC, Pang J (2016) GIT1 controls stalk cell fate by inhibiting Dll4-Notch1 signaling. Cell Rep. (Cell Press)2016 Dec 6;17(10):2532-2541. # contributed equally. (Impact Factor: 9.995)

 

31. Szeto SG, Narimatsu M, Lu M, He X, Sidiqi AM, Tolosa MF, Chan L, Freitas KD, Bialik JF, Majumder S, Boo S, Hinz B, Dan Q, Advani A, John R, Wrana JL, Kapus A, Yuen DA (2016) YAP/TAZ are mechanoregulators of TGF-β-Smad signaling and renal fibrogenesis. J Am Soc Nephrol. 2016 27(10):3117-3128. (Impact Factor: 14.978)

 

30. Batchu SN, Majumder S, Bowskill BB, White KE, Advani SL, Brijmohan AS, Thai K, Azizi PM, Lee WL, Advani A (2016) Prostaglandin I2 Receptor Agonism Preserves β-Cell Function and Attenuates Albuminuria Through Nephrin-Dependent Mechanisms. Diabetes, 2016 May;65(5):1398-409. (Impact Factor: 9.337)

 

29. Siddiqi FS#, Majumder S#, Thai K, Advani SL, White KE, Bowskill BB, Hu, P, Guarna G, Abdalla M, dos Santos C, Connelly KA, Advani A (2015) The histone methyltransferase EZH2 protects against podocyte oxidative stress and renal injury in diabetes. J Am Soc Nephrol. 2016 Jul;27(7):2021-34. # contributed equally.  (Impact Factor: 14.978)

 

28. Majumder S, Advani A (2015) The epigenetic regulation of podocyte function in diabetes. J Diabetes Complications. 2015 Nov-Dec;29(8):1337-44. (Impact Factor: 3.219)

 

27. Narayanaswamy R, Majumder S, Chatterjee S, Wai LK, Arumugam G. Inhibition of Angiogenesis and Nitric Oxide Synthase (NOS), by Embelin & Vilangin Using in vitro, in vivo & in Silico Studies. Adv Pharm Bull. 2014; Suppl 2:543-548. (Impact Factor: 3.484)

 

26. Majumder S, Sinha S, Siamwala JH, Muley A, Seerapu HR, Kolluru GK, Sridhara SRC, Krishna Priya M, Kuppusamy M, Srinivasan S, Konikkat S, Soundararajan G, Nagarajan S, Venkataraman S, Saran U, Chatterjee S. A comparative study of NONOate based NO donors: Spermine NONOate is the best suited NO donor for endothelial functions. Nitric Oxide. 2014;36:76-86. (Impact Factor: 4.898)

 

25. Majumder S, Sowden MP, Gerber SA, Thomas T, Christie CK, Mohan A, Yin G, Lord EM, Berk BC, Pang J. GIT1 Is Required For Endothelial Cell Directional Migration and Tumor Angiogenesis Via Cortactin Dependent Lamellipodia Formation. Arterioscler Thromb Vasc Biol. 2014;34(2):419-26. (Impact Factor: 10.51)

 

24. Piguet AC#, Majumder S#, Saran U, Chatterjee S, Dufour JF. Everolimus is a potent inhibitor of activated hepatic stellate cell functions in vitro and in vivo, while demonstrating anti-angiogenic activities. Clin Sci (Lond)2014;126(11):775-84.  # contributed equally. (Impact Factor: 6.876)

 

23. Mukherjee AK, Chatterjee S, Majumdar S, Saikia D, Thakur R, Chatterjee A. Characterization of a pro-angiogenic, novel peptide from Russell's viper (Daboia russelii russelii) venom. Toxicon 2014;77:26- 31. (Impact Factor: 3.035)

 

22. Kolluru GK, Majumder S, Chatterjee S. Rho-kinase as a therapeutic target in vascular diseases: striking nitric oxide signaling. Nitric Oxide. 2014 Dec 1;43:45-54. (Impact Factor: 4.898)

 

21. Pang J, Xu X, Wang X, Majumder S, Wang J, Korshunov V, Berk BC. GIT 1 mediates intima formation by regulating vascular smooth muscle proliferation, apoptosis and migration. Arterioscler Thromb Vasc Biol. 2013;33(5):999-1005. (Impact Factor: 10.51)

 

20. Majumder S#, Piguet AC#, Dufour JF, Chatterjee S. Study of the Cellular Mechanism of Sunitinib Mediated Inactivation of Activated Hepatic Stellate Cells and Its Implications in Angiogenesis. Eur J Pharmacol. 2013;705(1-3):86-95. # contributed equally. (Impact Factor: 5.195)

 

19. Nagarajan S, Majumder S, Sharma U, Rajendran S, Kumar N, Chatterjee S, Singh B. Synthesis and anti-angiogenic activity of benzothiazole, benzimidazole containing phthalimide derivatives. Bioorg Med Chem Lett. 2013;23(1):287-90. (Impact Factor: 2.94)

 

18. Siamwala JH, Paul DM, Majumder S, Joshi M, Sinkar VP, Banerjee G, Chatterjee S. L-theanine promotes nitric oxide production in endothelial cells through eNOS phosphorylation. J Nutr Biochem. 2013;24(3):595-605. (Impact Factor: 6.117)

 

17. Majumder S, Sreedhara SR, Banerjee S, Chatterjee S. TNF α signaling beholds thalidomide saga: A review of mechanistic role of TNF-α signaling under thalidomide. Curr Top Med Chem, 2012;12(13):1456- 67. (Impact Factor: 3.57)

 

16. Lee J, Majumder S, Chatterjee S, Muralidhar K. Inhibitory activity of the peptides derived from buffalo prolactin on angiogenesis. J Biosci. 2011;36(2):341-354. (Impact Factor: 2.795)

 

15. Majumder S, Siamwala JH, Srinivasan S, Sinha S, Sridhara SR, Soundararajan G, Seerapu HR, Chatterjee S. Simulated microgravity promoted differentiation of bipotential murine oval liver stem cells by modulating BMP4/Notch1 signaling. J Cell Biochem. 2011;112(7):1898-1908. (Impact Factor: 4.48)

 

14. Sinha S, Sridhara SR, Srinivasan S, Muley A, Majumder S, Kuppusamy M, Gupta R, Chatterjee S. NO (nitric oxide): the ring master. Eur J Cell Biol. 2011;90(1):58-71. (Impact Factor: 6.02)

 

13. Siamwala JH#, Majumder S#, Tamilarasan KP, Muley A, Reddy SH, Kolluru GK, Sinha S, Chatterjee S. Simulated microgravity promotes nitric oxidesupported angiogenesis via the iNOS-cGMP-PKG pathway in macrovascular endothelial cells. FEBS Lett. 2010;584(15):3415-3423. # contributed equally. (Impact Factor: 3.864)

 

12. Majumder S, Ilayaraja M, Seerapu HR, Sinha S, Siamwala JH, Chatterjee S. Chick embryo partial ischemia model: A new approach to study ischemia ex vivo. PLoS one, 2010; 5:e10524. (Impact Factor: 3.752)

 

11. Seerapu HR, Subramaniam GP, Majumder S, Sinha S, Bisana S, Mahajan S, Kolluru GK, Muley A, Siamwala JH, Illavazagan G, Chatterjee S. Inhibition of dynamin-2 confers endothelial barrier dysfunctions by attenuating nitric oxide production. Cell Biol Int. 2010;34(7):755-61. (Impact Factor: 4.473)

 

10. Kolluru GK, Sinha S, Majumder S, Muley A, Siamwala JH, Gupta R, Chatterjee S. Shear stress promotes nitric oxide production in endothelial cells by sub-cellular delocalization of eNOS: A basis for shear stress mediated angiogenesis. Nitric Oxide. 2010; 15;22(4):304-315. (Cover page of Nitric oxide,Vol. 22, Issue 4) (Impact Factor: 4.898)

 

9. Siamwala JH, Reddy HS, Majumder S, Kolluru GK, Muley A, Chatterjee S. Simulated microgravity perturbs actin polymerization to promote nitric oxide associated migration of immortalized endothelial cells. Protoplasma, 2010;242(1- 4):3-12. (Impact Factor: 3.186)

 

8. Muley A, Majumder S, Kolluru GK, Parkinson S, Viola H, Hool L, Arfuso F, Ganss R, Dharmarajan A, Chatterjee S. Secreted frizzled-related protein 4: an angiogenesis inhibitor. Am J Pathol. 2010;176(3):1505- 16. (Impact Factor: 5.77)

 

7. Jetti SK, Swain SM, Majumder S, Chatterjee S, Poornima V, Bera AK. Evaluation of the role of nitric oxide in acid-sensing ion channel-mediated cell death. Nitric Oxide. 2010; 22(3):213-9. (Impact Factor: 4.898)

 

6. Majumder S, Rajaram M, Muley A, Reddy HS, Tamilarasan K, Kolluru GK, Sinha S, Siamwala JH, Gupta R, Ilavarasan R, Venkataraman S, Sivakumar K, Anishetty S, Kumar PG, Chatterjee S. Thalidomide attenuates nitric oxide-driven angiogenesis by interacting with soluble guanylyl cyclase. Br J Pharmacol. 2009 158(7); 1720-1734. (Impact Factor: 9.473)

 

5. Majumder S#, Gupta R#, Reddy HB, Sinha S, Muley A, Kolluru GK, Chatterjee S. Cadmium attenuates bradykinin driven nitric oxide production by interplaying with the localization pattern of endothelial nitric oxide synthase. Biochem. Cell Biol. 2009 87(4): 605–620. #contributed equally. (Impact Factor: 3.73)

 

4. Arora S, Tyagi YK, Kumar A, Majumder S, Saluja D, Raj HG, Chatterjee S, Saso L, Prasad AK, Parmar VS. The Role of Calreticulin Transacetylase in the Activation of Human Platelet Nitrite Reductase by Polyphenolic Acetates. Biol Pharm Bull. 2009;32(2):161-5. (Impact Factor: 1.863)

 

3. Kolluru GK, Tamilarasan KP, Rajkumar AS, Geetha Priya S, Rajaram M, Saleem NK, Majumder S, Jaffar Ali BM, Illavazagan G, Chatterjee S. Nitric oxide/cGMP protects endothelial cells from hypoxia- mediated leakiness. Eur J Cell Biol. 2008;87(3):147-61. (Impact Factor: 6.02)

 

2. Majumder S, Muley A, Kolluru GK, Saurabh S, Tamilarasan KP, Chandrasekhar S, Reddy HB, Purohit S, Chatterjee S. Cadmium reduces bioavailability of nitric oxide by impairing phosphorylation of endothelial nitric oxide synthase. Biochem Cell Biol. 2008;86(1):1-10. (Impact Factor: 3.73)

 

1. Majumder S, Tamilarasan KP, Kolluru GK, Muley A, Nair CM, Omanakuttan A, Murty KV, Chatterjee S. Activated pericyte attenuates endothelial functions: nitric oxide - cGMP rescues activated pericyte- associated endothelial dysfunctions. Biochem Cell Biol. 2007; 85(6):709-20. (Impact Factor: 3.73)


Book Chapters

1. Giri S, Thakar S, Majumder S, Chatterjee S. Regulation of Oxidative Stress by Nitric Oxide Defines Lung Development and Diseases. Oxidative Stress in Lung Diseases (Springer Nature), 445-464, 2019.

2. Majumder S, Gajalakshmi P, Chatterjee  S. Use of stem cells to block the activation of hepatic stellate cells in diseased liver. Stem Cell Therapy for Organ Failure (Springer), 221-232, 2014. 

3. Majumder S, Sridhara SRC, Chatterjee S. Developing an Ex Vivo Model of Ischemia Using Early Chick-Embryo: A Model to Study Ischemia Related Angiogenesis. The Textbook of Angiogenesis and Lymphangiogenesis: Methods and Applications, VII, 241-251, 2012.

 


Selected Publications

  • Bharat Nayak; Priya Tanvidkar; & Bhanu Vardhan Reddy Kuncharam*;  Preparation, Characterization, and CO2 Permeation testing of Cellulose Acetate and Polyimide Blend Membranes. Polymer Engineering and Science, Accepted, Nov 2023. 
  • Aditya Jonnalagedda & Bhanu Vardhan Reddy Kuncharam*, Investigation of ZIF-8, Amine-modified ZIF-8 and Polysulfone based Mixed matrix membranes (MMMs) for CO2/CH4 separation. Journal of Applied Polymer Science, Published Online 1 Sep 2023, 2023.
  • Priya Tanvidkar, Aditya Jonnalagedda, Bhanu Vardhan Reddy Kuncharam*, Investigation of Cellulose Acetate and ZIF-8 mixed matrix membrane for CO2 separation from model biogas. Environmental Technology, 2023,  Link
  • Priya Tanvidkar, Bharat Nayak, Bhanu Vardhan Reddy Kuncharam*, Study of dual filler mixed matrix membranes with acid-functionalized MWCNTs and Metal-Organic Framework (UiO-66-NH2) in Cellulose Acetate for CO2 separation, Journal of Polymers and the Environment, 2023. Link
  • Yash Katakia, Satyadevan Kanduri, Ritobrata Bhattacharyya, Srinandini Ramanathan, Ishan Nigam, Bhanu Vardhan Reddy Kuncharam*, Syamantak Majumder*, Angular difference in human coronary artery governs endothelial cell structure and function, Communications Biology, 5 (1), 2022. Link
  • B.V.R Kuncharam,  & A.G Dixon"Multi-scale two-dimensional packed bed reactor model for industrial steam methane reforming", Fuel Processing Technology, 2020, 200, pp 106314.  Link

 


Publications

List of Publications (Rita Sharma, Maiden Name: Rita Arora)

Research/Review Articles:

1)          Dhaka N, Jain R, Yadav A, Yadav P, Kumar N, Sharma MK, Sharma R. (2022)Transcriptome analysis reveals cell cycle-related transcripts as key determinants of varietal differences in seed size of Brassica juncea. Scientific Reports 12:11713,

2)          Duitama J, Bartely LE, Guyot RA, Sharma R Editorial: Grass Genome Evolution and Domestication. Frontiers in Plant Science. doi: 10.3389/fpls.2022.866201.

3)          Rahman F, Mishra A, Gupta A and Sharma R (2022) Spatiotemporal regulation of CRISPR/Cas9 enables efficient, precise, and heritable edits in plant genomes. Frontiers in Genome Editing4: 870108.

4)          Sathasivam M, Swamy BK, Krishnan K, Sharma R, Nayak, SN, Uppar DS and Hosamani R (2022) Insights into the molecular basis of hypergravity-induced root growth phenotype in bread wheat (Triticum aestivum L.). Genomics 114: 110307.

5)          Kandpal M, Dhaka N and Sharma R (2021) Genome-wide in silico analysis of long intergenic non-coding RNAs from rice peduncles at the heading stage. Physiology and Molecular Biology of Plants, I27(10), 2389-2406.

6)          Rodrigues JA, Hsieh PH, Ruan D, Nishimura T, Sharma MK, Sharma R, Ye XY, Nguyen ND, Nijjar S, Ronald PC, Fischer RL and Zilberman D (2021) Divergence among rice cultivars reveals roles for transposition and epimutation in ongoing evolution of genomic imprinting. PNAS, 118 (29) e2104445118.

7)          Lovell et al,. (2021) Polyploidy and genomic introgressions facilitate climate adaptation and biomass yield in switchgrass. Nature 590, 438-444.

8)          Dhaka N and Sharma R. (2021) MicroRNA-mediated regulation of agronomically important seed traits: a treasure trove with shades of grey! Critical Reviews in Biotechnology, 1-15.

9)          Agarwal R, Dhaka N, Sharma R and Aman J. (2021) Genome-wide evolutionary analysis of precursor sequences of MIR156 and MIR172 family members in Brassica species. Research Journal of Biotechnology, 16 (4), 81-92.

10)       Kandpal M, Vishwakarma KKC, Krishnan KK, Chinnusamy V, Pareek A, Sharma MK and Sharma R. (2020) Gene expression dynamics of rice peduncles at the heading stage. Frontiers in Genetics, 11:584678.

11)       Vejlupkova Z, Warman C, Sharma R, Scheller HV, Mortimer JC, and Fowler, JE. (2020) No evidence for transient transformation via pollen magnetofection in several monocot species. Nature Plant, 6, 1323-1324.

12)       Shao W, Sharma R, Clausen M, Scheller H.V. (2020) Microscale thermophoresis as a powerful tool for screening glycosyltransferases involved in cell wall biosynthesis. Plant Methods 16.

13)       Wierbowski SD, Vo TV, Falter-Braun P, Jobe TO, Kruse LH, Wei X, Liang J, Meyer MJ, Akturk N, Rivera-Erick CA, Cordero NA, Paramo MI, Shayhidin EE, Bertolotti M, Tippens ND, Akther K, Sharma R, Katayose Y, Salehi-Ashtiani K, Hao T, Ronald PC, Ecker JR, Schweitzer PA, Kikuchi S, Mizuno H, Hill DE, Vidal M, Moghe GD, McCouch SR, and Yu H. (2020) A massively parallel barcoded sequencing pipeline enables generation of the first single-colony ORFeome and high-quality protein-protein interactome map for rice Proc Natl Acad Sci USA, Vol 117, 21.

14)       Singh V., Kumar N., Dwivedi A.K., Sharma R., Sharma M.K. (2020) Phylogenomic Analysis of R2R3 MYB Transcription Factors in Sorghum and their Role in Conditioning Biofuel Syndrome. Current Genomics 21(2).

15)       Mathur S., Priyadarshini SS., Singh V., Vashisht I., Jung K.H., Sharma R., and Sharma M.K. (2020) Comprehensive phylogenomic analysis of ERF genes in sorghum provides clues to the evolution of gene functions and redundancy among gene family members. 3 Biotech, 10(3):139.

16)       Sharma R., Liang Y., Lee M Y., Pidtala V.R. Motimer J C., and Scheller H.V. (2020) Agrobacterium-mediated transient transformation of sorghum leaves for accelerating functional genomics and genome editing studies. BMC Research Notes, 13: 116.

17)       Dhaka N., Krishnan K., Kandpal M., Vashisht I., Pal M., Sharma MK. and Sharma R*. (2020) Transcriptional trajectories of anther development provide candidates for engineering male fertility in sorghum. Scientific Reports 10, 897.

18)       Dhaka N., Sharma S., Vashisht I., Kandpal M., Sharma MK. and Sharma R*. (2019) Small RNA profiling from meiotic and post-meiotic anthers reveals prospective miRNA-target modules for engineering male fertility in sorghum. Genomics, 112 (2), 1598-1610.

19)       Chandran AKN., Moon S., Yoo, YH., Gho YS., Cao P., Sharma R., Sharma MK. Ronald PC and Jung KH (2019) A web-based tool for the prediction of rice transcription factor functions. Database2019, baz061.

20)       Kundu S*. and Sharma R*. (2018) Origin, evolution, and divergence of plant class C GH9 endoglucanases. BMC Evolutionary Biology 18 (1), 79.

21)       Dhaka N. and Sharma R*. (2017) MicroRNAs as targets for engineering biofuel feedstock Sorghum. Plant Physiology Reports (Formerly Indian Journal of Plant Physiology) 22 (4): 484-492.

22)       Mangal M., Srivastava A., Sharma R. and Kalia P. (2017) Conservation and dispersion of genes conferring resistance to tomato begomoviruses between tomato and pepper genomes. Frontiers in Plant Science 8, 1803.

23)       Mathur S., Umakanth A.V., Tonapi V.A., Sharma R*. and Sharma M.K* (2017) Sweet sorghum as biofuel feedstock: recent advances and available resources. Biotechnol Biofuels 10, 146.

24)       Park CJ., Wei T., Sharma R. and Ronald P.C. (2017) Overexpression of rice auxilin-like protein, XB21 induces nectrotic lesions, up-regulates endocytosis-related genes, and confers enhanced resistance to Xanthomons oryzae pv. oryzaeRice 10(1), 27.

25)       Dhaka N., Bhardwaj V., Sharma M.K. and Sharma R*. (2017) Evolving Tale of TCPs: New Paradigms and Old Lacunae. Frontiers in Plant Science 8, 479.

26)       Francis A., Dhaka N., Bakshi., Jung K.H., Sharma M.K. and Sharma R*. (2016) Comparative phylogenomic analysis provides insights into TCP gene functions in SorghumScientific Reports 6.

27)       Sharma R., Wungrampha W., Singh V., Pareek A. and Sharma, M.K. (2016) Halophytes as Bioenergy Crops. Frontiers in Plant Science 7: 1372.

28)       Kundu S., Sharma R*. (2016) In silico Identification and taxonomic distribution of plant class C GH9 endoglucanases. Frontiers in Plant Science 7: 1185.

29)       Chandran A.K.N., Yoo Y.H., Cao P., Sharma R., Sharma M.K., Dardick C., Ronald P.C. and Jung K.H. (2016) Updated rice kinase database RKD 2.0: enabling transcriptome and functional analysis of rice kinase genes. Rice 9:40.

30)       Harkenrider M., Sharma R., Vleesschauwer D.D., Tsao, L., Zhang X., Chern M., Canlas P., Zuo S. and Ronald P.C. (2016) Overexpression of rice Wall-Associated Kinase 25 (WAK25) alters resistance to bacterial and fungal pathogens. Plos One 11 (1):e0147310.

31)       Sharma M.K*., Sharma R*., Cao P., Harkenrider M., Jenkins J., Grimwood J., Zhang J., Udvardi M.K., Schmutz J. and Ronald P.C. (2016) Targeted switchgrass BAC library screening and sequence analysis identifies predicted biomass-related and stress response-related genes. BioEnergy Research, 9 (1): 109-122.First Co-Author

32)       Jung K.H., Cao P., Sharma R., Jain R., and Ronald, P.C. (2015) Phylogenomics databases for facilitating functional genomics in rice. Rice, 8: 26.

33)       Sharma R., Mishra M., Gupta B., Parsania C., Pareek S.L.S., and Pareek A. (2015) De Novo assembly and characterization of stress transcriptome in a salinity-tolerant variety CS52 of Brassica juncea. Plos One. 10(5):e0126783.

34)       Lao J., Sharma M.K., Sharma R., Fernandez-Nino S.M G., Schmutz J., Ronald P.C., Haezlewood J.L., and Schwessinger. (2015) Proteome profile of the endomembrance of developing coleoptiles from switchgrass (Panicum virgatum). Proteomics15(13): 2286-90.

35)       Sharma R., Cao P., Jung K.H., Sharma M.K. & Ronald P.C. (2013) Construction of a rice glycoside hydrolase phylogenomic database and identification of targets for biofuel research. Frontiers in Plant Biotechnology. 4, 330.

36)       Nayar S., Sharma R., Tyagi, A.K. and Kapoor, S. (2013) Functional delineation of rice MADS29 reveals its role in embryo and endosperm development by affecting hormone homeostasis. Journal of Experimental Botany, 64 (14), 4239-4253.

37)       Sharma R., Vleesschauwer D.D., Sharma M.K. & Ronald P.C. (2013Recent advances in dissecting stress regulatory crosstalk in rice (Review Article). Molecular Plant, 6 (2), 250-260.

38)       Park C.J*., Sharma R*., Lefebvre B., Canlas P.E. & Ronald P.C. (2013) The endoplasmic reticulum-quality control component SDF2 is essential for XA21-mediated immunity in rice. Plant Science, 210, 53-60. First co-author

39)       Rodrigues J.A., Ruan R., Nishimura T., Sharma M., Sharma R., Ronald P.C., Fischer, R.L., Zilberman, D. (2013) Imprinted expression of genes and small RNA is associated with localized hypomethylation of the maternal genome in rice endosperm. P.N.A.S., 110 (19), 7934-7939.

40)       Zhang J.Y., Lee Y.C., Jerez I. T., Wang M., Yin Y., Chou W.C., He J., Shen H., Pennacchio C., Lindquist E., Grimwood J., Schmutz J., Xu Y., Sharma M. K., Sharma R., Ronald P. Saha M., Dixon R., Tang Y. and Udvardi M. (2013) Development of an integrated transcript sequence database and a gene expression atlas for gene discovery and analysis in switchgrass (Panicum virgatum L.). The Plant Journal, 74 (1), 160-73.

41)       Sharma R*., Agarwal P*., Ray S., Deveshwar P., Sharma P., Sharma N., Nijhawan A., Jain M., Singh A.K., Singh V.P., Khurana J.P., Tyagi A.K. & Kapoor S. (2012) Expression dynamics of metabolic and regulatory components across stages of panicle and seed development in indica rice. Funct Integr Genomics12 (2),229-248. First co-author

42)       Sharma M.K., Sharma R., Cao P., Jenkins J., Bartley L.E., Qualls M., Grimwood J., Schmutz J., Rokhsar D. & Ronald P.C. (2012) A genome-wide survey of switchgrass genome structure and organization. PLoS ONE, 7(4): e33892.

43)       Bennetzen J.L., Schmutz J., Wang H., Percifield R., Hawkins J., Pontaroli A.C., Estep M., Feng L., Vaughn J.N., Grimwood J., Jenkins J., Barry K., Lindquist E., Hellsten U., Deshpande S., Wang X., Wu X., Mitros T., Triplett J., Yang X., Ye C., Mauro-Herrara M., Wang L., Li P., Sharma M.K., Sharma R., Ronald P.C., Panaud O., Kellogg E.A., Bruntnell T., Doust A., Tuskan G.A., Rokhsar D. & Devos K.M. (2012) Reference genome sequence of the model plant Setaria. Nature Biotech, 30, 555-561.

44)       Varanasi P., Katsnelson J., Larson D., Sharma R., Sharma M. K., Vega-Sanchez M.E., Zemla M., Ronald P.C., Simmons B., Sing S., Adams P. and Auer M. (2012) Mechanical stress analysis as a method to understand the impact of genetically engineered rice and Arabidopsis plants. Industrial Biotechnology, 8(4) 238-244.

45)       Sharma R., Tan F., Jung K.H., Sharma M.K., Peng Z. & Ronald P.C. (2011) Transcriptional dynamics during cell wall removal and regeneration reveals key genes involved in cell wall development in rice. Plant Mol Biol, 77, 391-406.

46)       Deveshwar P., Bovill W.D., Sharma R., Able J.A. & Kapoor S. (2011) Analysis of anther transcriptomes to identify genes contributing to meiosis and male gametophyte development in rice. BMC Plant Biol, 11, 78.

47)       Ray S., Dansana P.K., Giri J., Deveshwar P., Arora R., Agarwal P., Khurana J.P., Kapoor S. & Tyagi A.K. (2011) Modulation of transcription factor and metabolic pathway genes in response to water-deficit stress in rice. Funct Integr Genomics, 11, 157-178.

48)       Gaur R., Grover T., Sharma R., Kapoor S. & Khare S.K. (2010) Purification and characterization of a solvent stable aminopeptidase from Pseudomonas aeruginosa: Cloning and analysis of aminopeptidase gene conferring solvent stability. Process Biochemistry, 45, 757-764.

49)       Sharma M.K., Kumar R., Solanke A.U., Sharma R., Tyagi A.K. & Sharma A.K. (2010) Identification, phylogeny, and transcript profiling of ERF family genes during development and abiotic stress treatments in tomato. Mol Genet Genomics, 284, 455-475.

50)       Park C.J., Lee S.W., Chern M., Sharma R., Canlas P.E., Song M.Y., Jeon J.S. & Ronald P.C. (2010) Ectopic expression of rice Xa21 overcomes developmentally controlled resistance to Xanthomonas oryzae pv. oryzaePlant Sci, 179, 466-471.

51)       Sharma R., Kapoor M., Tyagi A.K., & Kapoor S. (2010) Comparative transcript profiling of TCP family genes provide insight into gene functions and diversification in rice and ArabidopsisJ. Plant Mol. Biol. Biotechnol., 1(1): 24-38.

52)       Sharma R., Mohan Singh R.K., Malik G., Deveshwar P., Tyagi A.K., Kapoor S. & Kapoor M. (2009) Rice cytosine DNA methyltransferases - gene expression profiling during reproductive development and abiotic stress. FEBS J, 276, 6301-6311.

53)       Kapoor M., Arora R., Lama T., Nijhawan A., Khurana J.P., Tyagi A.K. & Kapoor S. (2008) Genome-wide identification, organization and phylogenetic analysis of Dicer-like, Argonaute and RNA-dependent RNA Polymerase gene families and their expression analysis during reproductive development and stress in rice. BMC Genomics, 9, 451.

54)       Arora R., Agarwal P., Ray S., Singh A.K., Singh V.P., Tyagi A.K. & Kapoor S. (2007) MADS-box gene family in rice: genome-wide identification, organization and expression profiling during reproductive development and stress. BMC Genomics, 8, 242.

55)       Agarwal P., Arora R., Ray S., Singh A.K., Singh V.P., Takatsuji H., Kapoor S. & Tyagi A.K. (2007) Genome-wide identification of C2H2 zinc-finger gene family in rice and their phylogeny and expression analysis. Plant Mol Biol, 65, 467-485.

56)       Jain M., Nijhawan A., Arora R., Agarwal P., Ray S., Sharma P., Kapoor S., Tyagi A.K. & Khurana J.P. (2007) F-box proteins in rice. Genome-wide analysis, classification, temporal and spatial gene expression during panicle and seed development, and regulation by light and abiotic stress. Plant Physiol, 143, 1467-1483.

57)       Ray S., Agarwal P., Arora R., Kapoor S. & Tyagi A.K. (2007) Expression analysis of calcium-dependent protein kinase gene family during reproductive development and abiotic stress conditions in rice (Oryza sativa L. ssp. indica). Mol Genet Genomics, 278, 493-505.


Book Chapters/Proceedings

1)     Sharma, R*, Joshi, M (2022). Vulnerability and Resilience of Sorghum to Changing Climatic Conditions: Lessons from the Past and Hope for the Future. In: Roy, S., Mathur, P., Chakraborty, A.P., Saha, S.P. (eds) Plant Stress: Challenges and Management in the New Decade. Advances in Science, Technology & Innovation. Springer, Cham. https://doi.org/10.1007/978-3-030-95365-2_11.

2)    Jain R, Dhaka N , Pinky, Sharma R. (In Press) Role of Phytohormones in Regulating Agronomically Important Seed Traits in Crop Plants.  Book: Plant Hormones in Crop Improvement. Publisher: Elsevier

3)    Gupta P., Sharma R., Sharma M.K., Sharma M.P., Stapute G.K., Garg S., Singla-Pareek, S.L., Pareek A. (2016) Signaling cross talk between biotic and abiotic stress responses in soybean. Abiotic and Biotic Stresses in Soybean Production: Soybean Production, Volume 1, 27-52. Publisher: Oxford: Academic Press, Editors: Mohammad Miransari.

4)    Tyagi A.K., Khurana J.P., Khurana P., Kapoor S., Singh V.P., Singh A.K., Thakur J.K., Gupta V., Anand S., Vij S., Jain M., Ray S., Agarwal P., Arora R., Sharma P., Mukerjee S., Nijhawan A., Giri J. & Khurana R. (2005) Expression and functional analysis of rice genes involved in reproductive development and stress response. Rice Genetics V Proceedings of 5th International Genetics Symposium IRRI, Philippines, 313-330. World Scientific Publishing Co. Pte. Ltd. 5 Toh Tuck Link, Singapore.


Publications

 

International Journals

1. Amit Kumar, V. GautamD. Ravi Kumar, 2018 “Maximum Bulge Height and Weld line Displacement in Hydroforming of Tailor Welded Blanks” ASME Journal of Manufacturing Science and Engineering, 140, 031005 (1-14). 

2. Amit Kumar, D. Ravi Kumar, and Vijay Gautam, 2019 “Determination of Residual Stresses in Biaxial Stretching of Tailor Welded Blanks”, IOP Conference Series: Materials Science and Engineering, 651(1), 1-8.  
 
3.  Amit Kumar and D. Ravi Kumar, 2020,” Formability Predictions of TWBs in Hydroforming Using Flow Curves from Biaxial Tensile Tests” IMechie Part L: Journal of Materials: Design and Applications, 235(4), 853-867 
 
4. Amit Kumar, D. Ravi Kumar, Vijay Gautam, and K. Hariharan, 2022, “Characterization of Residual Stresses in Conventional and Hydroforming of Tailor Welded Blanks”, Journal of Materials Engineering and Performance, 31, 10171-10186. 
 
5. Manjesh Kumar, Chandan Kumar, Amit Kumar, and Manas Das, 2022, “Experimental and Theoretical Analysis of Material Removal in Poppet Valve Magnetorheological Finishing”, IMechie Part E: Journal of Process Mechanical Engineering, https://doi.org/10.1177/0954408922113910. 
 
International Conferences:
 
1. Mohammad Basri, Amit Kumar, Devendra K. Dubey, Anoop Chawla, and Sudipto Mukherjee, 2021, “Effect of Cell Geometry on the Out of Plane Response of Aluminum Honeycomb using Finite Element Method”, Composite Materials for Extreme Loading, Springer nature.
 
2. Sameer Kumar Behera, Vivek Kumar, Amit Kumar, Devendra K. Dubey, and Anoop Chawla, 2021, “Numerical Simulation of V-Shaped Composite Plate Subjected to Blast Loading”, Composite Materials for Extreme Loading, Springer nature.
 
 National Conferences:
 
 1. Amit Kumar, D. Ravi Kumar, “Effect of Thickness Ratio on Maximum Bulge Height and Peak Pressure in Hydroforming of Tailor Welded Blanks”, National Conference on Sheet Metal Forming, IIT Bombay, 8-9th Dec 2016.

Publications:

  1. Namitha Naik,Rajesh Mehrotra and Sandhya Mehrotra, 2022CARBON BIOSEQUESTRATION STRATEGIES: A REVIEW ., Carbon Capture Science and Technology. (Accepted)
  2. Rakesh Srivastava et al., Insight into strigolactone hormone functions in Plant parasitic weeds:a regulatory perspective (2022) Indian Journal of Experimental Biology vol60,Sept 2022.
  3. Zaiba H Khan, Siddhant Dang, Mounil B Memeya, Snela L. Bhadouriya, Sandhya Mehrotra and Rajesh Mehrotra Genome-wide analysis of AAAG and ACGT cis- elements in Arabidopsis thaliana reveals their involvement with genes downregulated under jasmonic acid response in an orientation independent manner is acceptable Genes,Genomes and Genetics (G3),2022,Jkac057. (Siddhant Dang and Mounil B Memeya are the undergraduate students who contributed in the manuscripts)
  4. P Dhatterwal, S Mehrotra, AJ Miller, Ravi Aduri,R Mehrotra, Effect of ACGT motif in spatiotemporal regulation of AtAVT6D, which improves tolerance to osmotic stress and nitrogen-starvation,2022 Plant Molecular Biology.
  5. P Dhatterwal, S Mehrotra, AJ Miller, R Mehrotra, "Promoter profiling of Arabidopsis amino acid transporters: clues for improving crops.  Plant Molecular Biology, 2021 1-25; https://doi.org/10.1007/s11103-021-01193-1.
  6. Gurpreet kaur Sidhu, Panchsheel Nogia ,Vandana Tomar, Rajesh Mehrtora and Sandhya Mehrotra "The in-vitro Activity of Reconstituted Rubisco Enzyme from Gloeobacter violaceus" 2021 Journal of Biosciences 
  7. Bhadouriya  et al.,  "In Silico analysis of CCGAC and CATGTG cis-regulatory elements across genomes reveals their roles in gene regulation under stress" 2021 vol 22  353-62. Current Genomics.(Abhishek Suresh and Himanshu Gupta are two undergraduate students who contributed in this manuscript)
  8. Shruti Sreedhar et al,. Molecular Docking studies of Indian variants of pathophysiological proteins of SARS-COV2 with selected drug candidates (2021) Vol 100 Pg 1-8. .Journal of genetics (Shruti Sreedhar & Gaurav Saha  are two undergraduate students who cotributed in this manuscript.)
  9. P Dhatterwal, S Mehrotra, AJ Miller, R Mehrotra, "Promoter profiling of Arabidopsis amino acid transporters: clues for improving crops.  Plant Molecular Biology, 1-25; https://doi.org/10.1007/s11103-021-01193-1.
  10. Snehlata Bhadouriya, Sandhya Mehrotra, Mahesh Basantani ,Gary Loake and Rajesh Mehrotra : Role of chromatin architecture in plant stress responses: An update Front. Plant Sci., 12 January 2021 | https://doi.org/10.3389/fpls.2020.603380
  11. Zaiba Hasan Khan, Swati Agarwal, Atul Rai, Mounil Binal Memaya,Sandhya Mehrotra and Rajesh Mehrotra: Coexpression Network analysis of PP2A genes with stress responsive genesin Arabidopsis thaliana reveals 13 key regulators. Nature Scientific Reports 2020 Dec 8;10(1):21480. doi: 10.1038/s41598-020-77746-z. (Atul Rai and Mounil Binal Memaya are two undergraduate students who cotributed in this manuscript.)
  12. Vaish S, Gupta D, Mehrotra R, Mehrotra S, Basantani MK. Glutathione S-transferase: a versatile protein family.       3 Biotech. 2020 Jul;10(7):321. doi: 10.1007/s13205-020-02312-3. Epub 2020 Jun 27. 
  13. Zaiba Hasan Khan,Richa Patel, Sandhya Mehrotra and Rajesh Mehrotra In-silico analysis of seed storage protein gene promoters reveals differential occurrence of 7cis-regulatory elements in monocot and 14 in dicot plants.2019 Gene Reports vol 17 100520. (Richa Patel is undergraduate student who cotributed in this manuscript.)
  14. Pinky Dhatterwal,Samyadeep Basu,Sandhya Mehrotra Rajesh Mehrtora Genome wide analysis of W box element in Arabidopsis thaliana reveals TGAC motif with genes down regulated by heat and salinity (2019)( Nature Scientific reports In Press). (Samaya Deep Basu is undergraduate student who cotributed in this manuscript.)
  15. Purva Bhalothia, Sneha Lata, Zaiba Hasan Khan, Brijesh Kumar#, Sandhya Mehrotra and Rajesh Mehrotra* Genome Wide Analysis of Protein Phosphatase 2C (PP2C) Genes in Glycine max and Sorghum bicolor (2018) Current Biotechnology Vol (7) 4 Pg 302-308. (Brijesh Kumar is higher degree student who cotributed in this manuscript.)
  16. Rajesh Mehrotra, Gary Loake and Sandhya Mehrotra ; Promoter Choice: Selection Vs rejection (2018) Gene reports (13) 38-41. 
  17. Dhatterwal P, Mehrotra S, Mehrotra R., Optimization of PCR conditions for amplifying an AT-rich amino acid transporter promoter sequence with high number of tandem repeats from Arabidopsis thaliana.BMC Res Notes. 2017 Nov 28;10(1):638. doi: 10.1186/s13104-017-2982-1.
  18. Mahesh Kumar Basantani, Divya Gupta, Rajesh Mehrotra, Sandhya Mehrotra, Swati Vaish, Anjali Singh.,An update on bioinformatics resources for plant genomics research. (2017) Current Plant Biology 11-12 
  19. Vandana Tomar, Gurpreet Kaur Sidhu, Panchsheela Nogia, Rajesh Mehrotra, Sandhya Mehrotra;" Regulatory components of carbon  concentrating mechanisms in aquatic unicellular photosynthetic organisms (2017)" Plant Cell Rep. DOI 10.1007/s00299-017-2191-3.
  20. Zaiba h. Khan, Brijesh Kumar,Pinky Dhatterwal, Sandhya Mehrotra and Rajesh Mehrotra" transcriptional regulatory network of Cis- Regulatory elements (Cres) and Transcriptional factors (Tfs) in plant during abiotic stress" International Journal of Plant Biology & Research 2017. (Brijesh Kumar is higher degree student who cotributed in this manuscript.)
  21. Rajesh Mehrotra, Kaushik Renganaath, Harsh Kanodia, Gary J Loake, Sandhya Mehrotra" Towards combinatorial transcriptional engineering " Biotechnology Advances 2017. ( doi: 10.1016/j.biotechadv.2017.03.006). (Kaushik Renganaath, Harsh Kanodia are two undergraduate students who cotributed in this manuscript.)
  22. Norihiko Nakazawa, Rajesh Mehrotra.Orie Arakawa and Mitsuhiro Yanagida (2016)  ICRF-193, an anti-cancer Topoisomerase II inhibitor, induces arched telophase spindles that snap, leading to a ploidy increase in fission yeast (Genes to cell).
  23. Relative efficiencies of transient transformation of Arabidopsis thaliana and Nicotiana tabacum upon heterologous expression of membrane proteins. Panchsheela Nogia, Vandana Tomar, Gurpreet Kaur Sidhu, Rajesh Mehrotra, Sandhya Mehrotra (Accepted) Indian Journal of Biotechnology.  
  24. Purva Bhalothia,1 Chetna Sangwan,1 Anshu Alok,2 Sandhya Mehrotra,1 and Rajesh Mehrotra1,* PP2C-like Promoter and Its Deletion Variants Are Induced by ABA but Not by MeJA and SA in Arabidopsis thaliana. Front Plant Sci. 2016; 7: 547.Published online 2016 May 3. doi:  10.3389/fpls.2016.00547.
  25. Rajesh Mehrotra, Khan Zaiba Hasan and Sandhya Mehrotra (2016) Lipase catalysed transesterification.Enzyme engineering 5:1 doi:/10.4172/2329-6674.1000e113.
  26. Elucidation of an array of nitrate transporter paralogs in Arabidopsis thaliana genome; Panchsheela Nogia, Gurpreet Kaur Sidhu, Vandana Tomar, Rajesh Mehrotra, Sandhya Mehrotra, Journal of Plant Physiology and Pathology (2016) DOI: 10.4172/2329-955X.1000154.
  27. Vandana Tomar, Gurpreet Kaur Sidhu, Panchsheela Nogia, Rajesh Mehrotra and sandhya mehrotra Role of habitat and great oxidation event on the occurrence of three multisubunit inorganic carbon-uptake systems in cyanobacteria J. Genetics 2016.
  28. Sidhu, G.K., Sharma R., Mehrotra, R.,  Mehrotra, S. Analysis of 39 cyanobacterial speciesreveals rbcX subunit to be present between L and S subunits Journal of Advances in Biology 2015 Vol 7(3) 1420-26. (Sharma R. is undergraduate student who cotributed in this manuscript.)
  29. Mehrotra R, Sangwan C, Khan ZH, Mehrotra S (2015) Cis Regulatory Elements in Regulation of Plant Gene Expression: An Overview. Gene Technology 4:129. doi: 10.4172/2329-6682.1000129.
  30. Mehrotra, Rajesh ; Taparia, Tanvi; Manjiri, MVSS; Shukla, Paritosh; Mehrotra, Sandhya"Developments and Challenges in Biodiesel Production from Microalgae: A Review" 2015, Biotechnology and applied Biochemistry, DOI: 10.1002/bab.1412.(Tanvi Tapadia & Manjiri MVSS was first degree & higer degree students respectively who cotributed in this manuscript.)
  31. Swarna kanchan, Rajesh Mehrotra, Shibashish chowdhary: Phylogenetic analysis of Endonuclease III protein family identifies key residues and processes during evolution :2015, Journal of Molecular evolution,81:54-67.
  32. Gurpreet Kaur Sidhu, Rajesh Mehrotra and Sandhya Mehrotra (2014) Carbon concentrating mechanisms: In rescue of RubisCO inefficiency: (2014) Acta Physiol. plant. DOI: 10.1007/s11738-014-1652-3
  33. Swarna Kanchan, Rajesh Mehrotra and Shibashish Chowdhary (2014) Evolutionary pattern of four representative DNA repair proteins across six model organisms: an insilico analysis.Network Model Anal Health InformBioinforma 3:70 DOI :10.1007/s13721-014-0070-1.
  34. Rajesh Mehrotra, Vishesh Jain, Chandra shekhar and Sandhya Mehrotra" Genome wide analysis of Arabidopsis thaliana reveals high frequency of AAAG(N)7CTTT motif (2014) Metagene (in Press). (Vishesh Jain, First degree student who contributed in this manuscript.)
  35. Singdha Nigam, Sandhya Mehrotra, B. Vani, Rajesh Mehrotra “Lipase Immobilization Techniques for Biodiesel Production: An Overview" Volume 2014 (2014), Article ID 664708, International Journal of Renewable Energy & Biofuels, 16 pages, DOI: 10.5171/2014.664708. (Snigdha Nigam, First degree student who contributed in this manuscript.)
  36. Rajesh Mehrotra, Purva Bhalothia, Prashali Bansal, Mahesh K Basantani, Vandana Bharti and Sandhya Mehrotra*: Abscisic acid and abiotic stress tolerance - different tiers of regulation. Journal of Plant physiology (2014) 171:486–496. (Prashali Bansal, First degree student who contributed in this manuscript.)
  37. Regulatory components of carbon concentrating mechanisms in aquatic unicellular photosynthetic organisms (2017) Vandana Tomar, Gurpreet Kaur Sidhu, Panchsheela Nogia, Rajesh Mehrotra, Sandhya Mehrotra; Plant Cell Rep. DOI 10.1007/s00299-017-2191-3.
  38. Soumya Bhattacharjee, Kaushik Renganaath, Mehrotra Rajesh and Mehrotra, Sandhya Mehrotra* (2013): Combinatorial control of gene expression. Biomed Research International. Article Id 407263,11 pages.(doi.org/10.1155/2013/407263). (Soumya Bhatterjee,Higher degree student and Kaushik Renangaath, First degree student who contributed in this manuscript.)
  39. Extraction of high quality cellulose from stem of Calotropis procera. Somnath Maji, Rajesh Mehrotra and Sandhya Mehrotra* South Asian J Exp Biol; 3 (3): 113‐118; 2013. (Somnath Majhi , higher degree student who contributed in this manuscript.)
  40. Rajesh Mehrotra, Ipshita Zutsi, Sachin Sethi, Purva Bhalothia, Sandhya Mehrotra (2013). Patterns and evolution of ACGT repeat cis element landscape across four plant genomes. http://www.biomedcentral.com/1471-2164/14/203/abstract. BMC Genomics, 14:203. (Ipshita Zutshi and Sachin Sethi are First degree student who contributed in this manuscript.)
  41. Purva Bhalothia, Anshu Alok, Sandhya Mehrotra and Rajesh Mehrotra (2013) AACA element negatively interferes with expression of Protein Phosphatase 2C like gene promoter. American Journal of Plant Sciences.4:549-554.
  42. Vikas Mangla, Bhavya Ravi, Shobha Mehra, Sandhya Mehrotra and Rajesh Mehrotra (2013) Biofuels: An Overview with special emphasis on Biodiesel and the role of lipase enzyme in synthesis. Current chemical Biology.7,96-103. (Vikas Mangla and Bhavya Ravi First degree student who contributed in this manuscript.)
  43. Bhavya Ravi, Sandhya Mehrotra* and Rajesh Mehrotra (2013) Advances in Heterogeneous and Enzymatic catalysis for the industrial production of biodiesel by transesterification: An overview. Current chemical Biology.7,104-113. (Bhavya Ravi, First degree student who contributed in this manuscript.)
  44. Bhavya Ravi, Ujjwal Banerjee, Rajesh Mehrotra and Sandhya Mehrotra* (2013): Engineering lipases for enhanced catalysis. Current chemical Biology. 7:114-120. (Bhavya Ravi and Ujjawal Banerjee are First degree student who contributed in this manuscript.)
  45. Purva Bhalothia, Sandhya Mehrotra and Rajesh Mehrotra (2013): Cloning and characterization of protein phosphatase 2C like promoter from Arabidopsis thaliana. International journal of Bioscience, Biochemistry and Bioinformatics. Vol 3(2) 103-105.
  46. Prabhat N Jha, Garima Gupta,Prameela Jha and Rajesh Mehrotra (2013) : Association of rhizosphereic/endophytic bacteria with plants:A potential gateway to Sustainable agriculture.Vol3(2) pg 73-84.
  47. Rajesh Mehrotra, Amit Yadav, Purva Bhalotia, Ratna Karan, Sandhya Mehrotra (2012) Evidence for directed evolution of larger size motif in Arabidopsis thaliana genome. The scientific world journal. Vol 2012, Article ID 983528, 5 pagesdoi:10.1100/2012/983528. (Amit Yadav, First degree student who contributed in this manuscript.)
  48. Bhavya Ravi, Madhulika Rai, Sandhya Mehrotra and Rajesh Mehrotra. An efficient protocol for the isolation of fungal DNA for strains obtained from oil contaminated fields (2012) SAJEB Vol 9 (2) 4 pg 162-165. (Bhavya Ravi and Madhulika Rai ae First degree student who contributed in this manuscript.)
  49. Aditi Gangawar, Sandhya Mehrotra, VB Sharan, Ratna Karan and Rajesh Mehrotra.10-43 sec after the big bang and million years henceforth (2012). Research and Reviews: A journal of Biotechnology. Vol. 2 (1) April 2012. (Aditi Gangawar,First degree student who contributed in this manuscript.)
  50. Norihiko Nakazawa, Rajesh Mehrotra, Masahiru Ebe and Mitsuhiro Yanagida (2011) Condensin phosphorylated by the Aurora-B-like kinase Ark-1 is continuously required until telophase in a mode distinct from Top2. Journal of Cell Science ., 124 (11) :1795-807.
  51. Rajesh Mehrotra, Gauri Gupta, Riccha Sethi, Narayan Kumar and Sandhya Mehrotra (2011) Designer promoter: An artwork of cis engineering. Plant Mol. Biol., Vol. 75 (6) 527-536. (Gauri Gupta and Riccha Sethi, higher degree student who contributed in this manuscript.)
  52. Sandhya Mehrotra, Prabodh K. Trivedi, Ajay Sethuraman and Rajesh Mehrotra (2011) The rbcL gene of Populus deltoides has multiple transcripts and is redox-regulated in vitro. Journal of Plant Physiology. 168:466-473. (Ajay Sthuram,  higher degree student who contributed in this manuscript)
  53. Rajesh Mehrotra, Sandhya Mehrotra and Jitendra Panwar (2011) Bionics: Where machines imitate life. Biotech, Bioinformatics, Bioengineering. 1(2):275-277.
  54. Akhil Bajaj, Purva Bhalothia, Prabhat Nath Jha and Rajesh Mehrotra (2010) Biodiesel production though lipase catalysed transesterification: An overview Journal of Molecular Catalysis B: Enzymatic 62: 9-14. http://www.journals.elsevier.com/journal-of-molecular-catalysis-b-enzymatic/most-read-articles(Akhil Bajaj, higher degree student who contributed in this manuscript.)
  55. Rajesh Mehrotra and Sandhya Mehrotra (2010) Promoter activation by ACGT in response to salicylic acid and abscisic acids is differentially regulated by the spacing between two copies of the motif. Journal of Plant Physiology. 167: 1214–1218.
  56. Rajesh Mehrotra, Sanjeev Kumar, Sandhya Mehrotra and BD Singh (2009) Seed storage protein gene regulation: A jigsaw puzzle. Indian J. Biotechnology. 8:147-158.
  57. Rajesh Mehrotra and Jitendra Panwar (2009) Dimerisation of GT element interferes negatively with gene activation J.Genetics 88: 257-260.
  58. Chandra Prakash Chaturvedi, Samir V Sawant, Kanti Kiran, Rajesh Mehrotra, Suriya Anjum Ansari, Niraj Lodhi and Rakesh Tuli (2006) Analysis of polarity in the expression from a multifactorial bidirectional promoter designed for high level expression of transgenes in plants. J Biotechnology. 123(1) 1-12.
  59. Samir V Sawant, Kanti Kiran, Rajesh Mehrotra, Chandra Prakash Chaturvedi, Suriya Anjum Ansari, Pratibha Singh, Niraj Lodhi and Rakesh Tuli (2005) A variety of synergistic and antagonistic interactions mediated by cis acting DNA motifs regulate gene expression in plant cells and modulate stability of the transcription complex formed on a basal promoter,. J .Exp .Botany. 56 2345-2353.
  60. Rajesh Mehrotra, Kanti Kiran, Chandra Prakash Chaturvedi, Suriya Anjum Ansari, Niraj Lodhi and Rakesh Tuli (2005) Effect of copy number and spacing of the ACGT and GTGGTTAG cis elements on transient expression of minimal promoters in plants. J .Genetics. 84(2)183-187.
  61. Palpu Pushpagandan, Sharad Srivastava, Rajesh Mehrotra and V K Kochar (2004) Water fixing/producing bacteria for Combating freshwater scarcity. Current Science. 87 (12) 1644-1646.

 


JOURNAL PUBLICATIONS

 

2023

1.   Sharma A., Emmanuel B., Kulasegaram S., Smooth particle hydrodynamics modelling of AFM nano-scratching of single crystal Copper , Nanomanufacturing and Metrology 6(1), 2022, Springer (I.F.: 3.78)

 2022

2.      Sharma A., Dubey D.K., Atomic insights into shock wave interactions with solid and porous   structures, Mechanics of Materials 177 (2022). Elsevier (I.F.: 4.137) https://doi.org/10.1016/j.mechmat.2022.104535

3.      Shinde A., Owhal A., Sharma A., Ranjan P., Roy T., Balasubramaniam R., Comparative analysis of mechanical properties for mono and poly-crystalline copper under nanoindentation - Insights from molecular dynamics simulations, Material Chemistry and Physics 277 (2022). Elsevier (I.F.: 4.778) https://doi.org/10.1016/j.matchemphys.2021.125559

 

2021 

4.      Roy T., Sharma A., Ranjan P., Balasubramaniam R., Modeling the Nano Indentation Behavior of Recast Layer and Heat Affected Zone on Reverse Micro EDMed Hemispherical Feature, Journal of Manufacturing Science and Engineering (ASME)143 (10), 101009. ASME (I.F.:3.033)

5.      Ranjan P., Sharma A., Roy T., Balasubramaniam R., Improvement in surface quality of diamond- turned aluminium substrate by using hydrogen peroxide: a molecular dynamics simulation study, Journal of Micromanufacturing, (2021), 27-35, https://doi.org/10.1177/2516598420963996

6.      Sharma A., Datta D., Balasubramaniam R., Prediction of tool wear constants for diamond turn machining of CuBe, Journal of Micromanufacturing. (2021) DOI: 10.1177/2516598420930992

2020

 

7.      Sharma A., Joshi S. S., Datta D., Balasubramaniam R., Investigation of tool and workpiece interaction on surface quality while diamond turning of CuBe alloy, Journal of Manufacturing Science and Engineering, 2020, Vol. 142 (2), 1-15 (ASMEI.F.-3.033). https://doi.org/10.1115/1.4045721

8.      Sharma A., Joshi S. S., Datta D., Balasubramaniam R., Modelling Tool Wear Mechanisms in Diamond Turning of Copper Beryllium, Journal of manufacturing processes, 2020/ Vol. 56, 439-450.. {Elsevier: I.F.- 5.01}. https://doi.org/10.1016/j.jmapro.2020.04.053

9.      Sharma A., Ranjan P., Balsubramaniam R., Investigation of effect of uncut chip thickness to edge radius ratio on nanoscale cutting behavior of single crystal copper: MD simulation approach, Journal of Micromanufacturing, (2020)  https://doi.org/10.1177/2516598420937638

10. Sharma A., as co-author, Micromachining- A review (Part I), Journal of micro-manufacturing (SAGE) /2020/ 1-17. https://doi.org/10.1177/2516598419895828

2019

11. Sharma A., Datta D., Balasubramaniam R., A molecular dynamics simulation of wear mechanism of diamond tool in nanoscale cutting of copper beryllium, International Journal of Advanced Manufacturing Technology, (2019), Vol. 102, 731-745. {Springer: I.F.- 3.226}   https://doi.org/10.1080/08927022.2019.1626988

12. Sharma A., Roy T., Ranjan P., Datta D., Balasubramaniam, R., “Investigation of tool-workpiece interaction in nanoscale cutting: A Molecular Dynamics study”,  International Journal of Precision Technology, (2019) Vol. 8, 411 - 428. 10.1504/IJPTECH.2019.100940

13. Roy T., Sharma A., Datta D., Balasubramaniam R., Molecular dynamics simulation of single   discharge and dimensionless correlation with actual material removal in micro-EDM, Molecular simulation, 2019, Vol. 45 (13), 1-11 (I.F.-2.178). https://doi.org/10.1080/08927022.2019.1626988

14. Ranjan P., Sharma A., Roy T., Balasubramaniam R., Jain V. K., “Molecular Dynamics Simulation of Mechanical Polishing”, International Journal of Precision Technology, 2019 / Vol.  8(2-4), 335-353. https://doi.org/10.1504/IJPTECH.2019.100932

2018

15. Sharma A., Datta D., Balasubramaniam R., An investigation of tool and hard particle interaction in nanoscale cutting of copper beryllium, Computational materials science (2018) 145 (2018) 208–223. (I.F.-3.3https://doi.org/10.1016/j.commatsci.2018.01.011

16. Sharma A., Datta D., Balasubramaniam R., Molecular dynamics simulation to investigate the orientation effects on nanoscale cutting of single crystal Copper, Computational materials science (2018), 153, 241-250. (I.F.- 3.3)  https://doi.org/10.1016/j.commatsci.2018.07.002

17. Roy T., Sharma A., Datta D., Balasubramaniam R., Molecular dynamics study on the effect of discharge on adjacent craters on micro EDMed surface, Precision Engineering, Vol. 52, pp. 469-476, 2018.  https://doi.org/10.1016/j.precisioneng.2018.02.005 (I.F.-3.156)   

 


Publications

Recent Publication(s)

  • Kumar PS, Bhand S, Das AK, Goel S. Microfluidic paper device with on-site heating to produce reactive peroxide species for enhanced smartphone enabled chemiluminescence signal. Talanta; 2022. 236 (122858), 1-8.
  • Pandey I, Quadiri A, Wadi I, Pillai CR, Singh AP, Das A. Conserved Plasmodium Protein (PF3D7_0406000) of Unknown Function: In-silico Analysis and Cellular LocalizationInfection, Genetics and Evolution; 2021. 92(104848), 1-9.
  • Shah RK, Pati S, Saini M, Boopathi PA, Kochar SK, Kochar DK, Das A, Singh S. Reduction of sphingosine kinase 1 phosphorylation and activity in Plasmodium-infected erythrocytes. Frontiers in Cell and Developmental Biology; 2020. 80(8), 1-15.

Selected Publications

  • Boopathi PA, Subudhi AK, Middha S, Acharya J, Mugasimangalam RC, Kochar SK, Kochar DK, Das A. Design, construction and validation of a Plasmodium vivax microarray for the transcriptome profiling of clinical isolates. Acta Tropica; 2016. 164, 438-447.
  • Subudhi AK, Boopathi PA, Pandey I, Kaur R, Middha S, Acharya J, Kochar SK, Kochar DK, Das A. Disease specific modules and hub genes for intervention strategies: A co-expression network based approach for Plasmodium falciparum clinical isolates. Infection, Genetics and Evolution; 2015. 35, 96-108.
  • Subudhi AK, Boopathi PA, Pandey I, Kohli R, Karwa R, Middha S, Acharya J, Kochar SK, Kochar DK, Das APlasmodium falciparum complicated malaria: Modulation and connectivity between exportome and variant surface antigen gene families. Molecular and Biochemical Parasitology; 2015. 201(1), 31–46.
  • Subudhi AK, Boopathi PA, Garg S, Middha S, Acharya J, Pakalapati D, Saxena V, Aiyaz M, Chand B, Mugasimangalam RC, Kochar SK, Sirohi P, Kochar DK, Das A. Natural Antisense Transcripts in Plasmodium falciparum isolates from patients with complicated malaria. Experimental Parasitology; 2014. 141, 39-54.
  • Boopathi PA, Subudhi AK, Garg S, Middha S, Acharya J, Pakalapati D, Saxena V, Aiyaz M, Chand B, Mugasimangalam RC, Kochar SK, Sirohi P, Kochar DK, Das A. Revealing natural antisense transcripts from Plasmodium vivax isolates: Evidence of genome regulation in complicated malaria. Infection, Genetics and Evolution; 2013. 20, 428–443.
  • Kochar DK, Das A, Kochar SK, Saxena V, Sirohi P, Garg S, Kochar A, Khatri MP, Gupta V. Severe Plasmodium vivax Malaria: A Report on Serial Cases from Bikaner in Northwestern India. The American Journal of Tropical Medicine and Hygiene; 2009. 80(2), 194-198.
  • Acharya P, Pallavi R, Chandran S, Chakravarti H, Middha S, Acharya J, Kochar SK, Kochar DK, Subudhi AK, Boopathi PA, Garg S, Das A, Tatu U. A glimpse into the clinical proteome of human malaria parasites Plasmodium falciparum and Plasmodium vivaxProteomics Clinical Applications; 2009. 3(11), 1314–1325.
  • Kochar DK, Pakalapati D, Kochar SK, Sirohi P, Khatri MP, Kochar A, Das A. An unexpected cause of fever and seizures. The Lancet; 2007. 370(9590), 908.
  • Kochar D, Saxena V, Singh N, Kochar S, Kumar V, Das A. (2005). Plasmodium vivax malaria. Emerging Infectious Diseases; 2005. 11(1), 132-134.  
Complete list of publications available on Google Scholar

Publications

For a complete and up-to-date list of my publications, please see my Google Scholar profile or my DBLP page.

Peer-reviewed Journals:

  1. S Yadav, A Mehra, H Rohmetra, R Ratnakumar, P Narang, DerainGAN: Single image deraining using wasserstein GAN. Multimedia Tools and Applications, 1-17, 2021. [SCI Journal, Impact Factor: 2.313]
  2. K Kotecha, D Garg, B Mishra, P Narang, VK Mishra, Background Invariant Faster Motion Modeling for Drone Action Recognition. Drones 5 (3), 87, 2021.
  3. V Jain, RK Kaliyar, A Goswami, P Narang, Y Sharma. AENeT: an attention-enabled neural architecture for fake news detection using contextual features. Neural Computing and Applications, 1-12.  [SCI Journal, Impact Factor: 4.774]
  4. A. Jain, R. Ramprasad, P. Naranget al. AI-enabled Object Detection in UAVs: Challenges, Design Choices, and Research Directions. IEEE Network. 2021 [SCI Journal, Impact Factor: 8.8]
  5. H. Rohmetra, N. Raghunath, P. Naranget. al. AI-enabled remote monitoring of vital signs for COVID-19: methods, prospects and challenges. Computing. 2021[SCI Journal, Impact Factor: 2.044]
  6. R. K. Kaliyar, A. Goswami, P. Narang, EchoFakeD: improving fake news detection in social media with an efficient deep neural network, Neural Computing and Applications. 2021 [SCI Journal, Impact Factor: 4.774]
  7. R. K. Kaliyar, A. Goswami, P. Narang, FakeBERT: Fake news detection in social media with a BERT-based deep learning approach. Multimedia Tools and Applications. 2021. [SCI Journal, Impact Factor: 2.313]
  8. A. Mehra, M. Mandal, P. Narang, V. Chamola, ReViewNet: A Fast and Resource Optimized Network for Enabling Safe Autonomous Driving in Hazy Weather Conditions, IEEE Transactions on Intelligent Transportation Systems. 2020. [SCI Journal, Impact Factor: 6.319]
  9. P. Garg, A. S. Chakravarthy, M. Mandal, P. Narang, V. Chamola, M. Guizani, ISDNet: AI-enabled Instance Segmentation of Aerial Scenes for Smart Cities, ACM Transactions on Internet Technology. 2020 [SCI Journal, Impact Factor: 3.75]
  10. B. Mishra, D. Garg, P. Narang, V. Mishra, A Hybrid Approach for Search and Rescue using 3DCNN and PSO, Neural Computing and Applications. 2020 [SCI Journal, Impact Factor: 4.774]
  11. R. K. Kaliyar, A. Goswami, P. Narang, DeepFakE- Improving Fake News Detection using Tensor Decomposition-based Deep Neural Network, The Journal of Supercomputing. 2020 [SCI Journal, Impact Factor: 2.157]
  12. B. Mishra, D. Garg, P. Narang, V. Mishra, Drone-surveillance for Search and Rescue in Natural Disaster, Computer Communications, 156, 1-10. 2020. [SCI Journal, Impact Factor: 2.766]
  13. G. Bansal, V. Chamola, P. Narang, S. Kumar, S. Raman, Deep3DSCan: Deep Residual Network and Morphological Descriptor based Framework for Lung Cancer Classification and 3D Segmentation, IET Image Processing, 14(7), 1240-1247. 2020. [SCI Journal, Impact Factor: 2.004]
  14. R. K. Kaliyar, A. Goswami, P. Narang, S. Sinha, FNDNet: A Deep Convolutional Neural Network for Fake News Detection, Cognitive Systems Research, 61, 32-44. 2020. [SCI Journal, Impact Factor 1.384]
  15. R. Bhardwaj, S. Sinha, N. Sahu, S. Majumder, P. Narang, R.Mukhiya, Modeling and Simulation of Temperature Drift for ISFET based pH Sensor and its Compensation through Machine Learning Techniques. International Journal of Circuit Theory and Applications. 2019. [SCI Journal, Impact Factor 1.44] [The paper was recognized as a top downloaded paper of the journal]
  16. M. Lahoti, P. Narang, K.H. Tan, E.H. Yang, Mix design factors and compressive strength prediction of metakaolin-based geopolymer, Ceramics International, 43 (14), pages 11433-11441, October 2017 [SCI journal, Impact Factor 2.98]
  17. P. Narang, C. Hota and H. T. Sencar, Noise-resistant Mechanisms for the Detection of Stealthy P2P Botnets. Computer Communications, Elsevier, May 2016 [SCI journal, Impact Factor 2.766]
  18. P. Narang and C. Hota, Game-theoretic strategies for IDS deployment in P2P networks, Information Systems Frontiers, Springer, 17(5), pages 1017-1028, July 2015 [SCI Journal, Impact Factor 2.5]
  19. P. Narang, C. Hota and V.N. Venkatakrishnan, PeerShark: flow-clustering and conversation-generation for malicious P2P traffic identification, EURASIP Journal on Information Security, Springer, Vol 2014(1), pages 1-12, October 2014 [Scopus indexed]

Peer-reviewed Conferences/Workshops/Symposia:

  1. R. K. Kaliyar, A. Goswami, P. Narang, MCNNet: Generalizing Fake News Detection with a Multichannel Convolutional Neural Network using a Novel COVID-19 Dataset. ACM CODS-COMAD, India. 2021
  2. R. K. Kaliyar, A. Goswami, P. Narang, A Hybrid Model for Effective Fake News Detection with a Novel COVID-19 Dataset. 13th ICAART, 2021
  3. Aditya Mehta, Harsh Sinha, Murari Mandal and Pratik Narang, Domain-Aware Unsupervised Hyperspectral Reconstruction for Aerial Image Dehazing, WACV 2021
  4. Prateek Garg, Murari Mandal and Pratik Narang, Improving Aerial Instance Segmentation in the Dark with Self-Supervised Low Light Enhancement, The 35th AAAI Conference on AI, 2021.
  5. Harsh Sinha, Aditya Mehta, Murari Mandal and Pratik Narang, Learning to Enhance Visual Quality via Hyperspectral Domain Mapping,  The 35th AAAI Conference on AI, 2021.
  6. Dawei Du et. al, VisDrone-DET2020: The Vision Meets Drone Object Detection in Image Challenge Results. ECCV Workshops (virtual), Aug 2020. [Note: Our team was among the qualifying participants of the VisDrone challenge on aerial object detection. All qualifying participants are invited to contribute to and co-author the challenge report]
  7. Jai Singhal and Pratik Narang, DeblurRL: Image deblurring with Deep Reinforcement Learning. CVIP (virtual), India, Dec 2020
  8. E Ntavelis, et al. AIM 2020 challenge on image extreme inpainting. European Conference on Computer Vision. Springer, Cham, 2020. [Note: Our team was among the qualifying participants of the AIM challenge on image inpainting. All qualifying participants are invited to contribute to and co-author the challenge report]
  9. C. O. Ancuti et. al., NTIRE 2020 Challenge on NonHomogeneous Dehazing. CVPR Workshops, USA, June 2020. [Note: Our team was among the qualifying participants of the NTIRE challenge on non-homogenuous dehazing. All qualifying participants are invited to contribute to and co-author the challenge report]
  10. A. Mehta, H. Sinha, P. Narang and M. Mandal, HIDeGAN: A Hyperspectral-guided Image Dehazing GAN, CVPR Workshops, USA, June 2020.
  11. Rohit Kaliyar, Anurag Goswami and Pratik Narang, Multiclass Fake News Detection using Ensemble Machine Learning. IEEE 9th International Advance Computing Conference (IACC), Chennai, December 2019. 
  12. Rohit Kaliyar, Pratik Narang and Anurag Goswami, SMS Spam Filtering on Multiple Background Datasets Using Machine Learning Techniques: A Novel Approach. IEEE 8th International Advance Computing Conference (IACC), Noida, December 2018. 
  13. Rishabh Bhardwaj, Sagnik Majumder, Pawan K. Ajmera, Soumendu Sinha, Rishi Sharma, Ravindra Mukhiya and Pratik Narang, Temperature Compensation of ISFET Based pH Sensor Using Artificial Neural Networks. 2017 IEEE Regional Symposium on Micro and Nanoelectronics, Malaysia, August 2017.
  14. Pratik Narang and Biplab Sikdar, Anomaly Detection in Diurnal CPS Monitoring Data Using a Local Density Approach. IEEE 24th International Conference on Network Protocols (ICNP), 2016, Singapore, November 2016
  15. Vinay Chamola, Pratik Narang and Biplab Sikdar, Battery Lifetime Estimation for Solar Powered Cellular Base Stations. The IEEE Symposium on Emerging Topics in Smart and Sustainable Grids, Singapore, September 2016
  16. Vinay Chamola, Pratik Narang and Biplab Sikdar, Downlink Power Control for Latency Aware Grid Energy Savings in Green Cellular Networks. The 37th Sarnoff Symposium, USA, September 2016.
  17. Pratik Narang, Abhishek Thakur and Chittaranjan Hota, Hades: A Hadoop-based Framework for Detection of Peer-to-Peer Botnets. The 20th International Conference on Management of Data (COMAD) 2014, Hyderabad, December 2014.
  18. Pratik Narang, Kunal Mehta and Chittaranjan Hota, Game-theoretic Patrolling Strategies for Intrusion Detection in Collaborative Peer-to-Peer Networks. The International Conference on Secure Knowledge Management in Big-data era (SKM) 2014, Dubai, UAE, December 2014.
  19. Pratik Narang, Vansh Khurana and Chittaranjan Hota, Machine-learning Approaches for P2P Botnet Detection using Signal-processing Techniques. The 8th ACM International Conference on Distributed Event- Based Systems (DEBS), Mumbai, India, May 2014.
  20. Pratik Narang, Subhajit Ray, Chittaranjan Hota and V.N. Venkatakrishnan, PeerShark: Detecting Peer-to- Peer Botnets by Tracking Conversations. IEEE Security & Privacy Workshops (co-located with the 35th IEEE Symposium on Security & Privacy), San Jose, USA, May 2014.
  21. Pratik Narang, Jagan Mohan Reddy and Chittaranjan Hota, Feature Selection for Detection of Peer-to-Peer Botnet Traffic. The 6th ACM India Compute conference, Vellore, India, August 2013. 

Book chapters:

  1. Chittaranjan Hota, Pratik Narang, and Jagan Mohan Reddy, Unwanted Traffic Identification in Large-scale University Networks: A Case Study, Big Data Analytics, pp. 163-187. Springer India, October 2016.

Statistics

 

Google scholar page: Click here
Scopus authorid: 8961747500
ResearchGate Profile: Click here
 
(Statistics as on September 03, 2022)
 
Total number of publications
21
Total number of journal articles
20
Total number of book-chapters
01
Total number of citations
3252 (GoogleScholar)
2617 (Scopus)
2939 (ResearchGate)
Average citations per published item
110+ (GoogleScholar)
92+ (Scopus)
81+ (ResearchGate)
h-index
11 (Google Scholar)
9 (Scopus)
 
i10-index
11 (Google Scholar)
9 (Scopus)
i20-index
8 (Google Scholar)
7 (Scopus)

Journal Articles

 

20. E. Epifanovsky, A. T. B. Gilbert, X. Feng, J. Lee, Y. Mao, N. Mardirossian, P. Pokhilko, A. F. White, M. P. Coons, A. L. Dempwolff, Z. Gan, D. Hait, P. R. Horn, L. D. Jacobson, I. Kaliman, J. Kussmann, A. W. Lange, K. U. Lao, D. S. Levine, J. Liu, S. C. McKenzie, A. F. Morrison, K. D. Nanda, F. Plasser, D. R. Rehn, M. L. Vidal, Z.-Q. You, Y. Zhu, B. Alam, B. J. Albrecht, A. Aldossary, E. Alguire, J. H. Andersen, V. Athavale, D. Barton, K. Begam, A. Behn, N. Bellonzi, Y. A. Bernard, E. J. Berquist, H. G. A. Burton, A. Carreras, K. Carter-Fenk, R. Chakraborty, A. D. Chien, K. D. Closser, V. Cofer-Shabica, S. Dasgupta, M. de Wergifosse, J. Deng, M. Diedenhofen, H. Do, S. Ehlert, P.-T. Fang, S. Fatehi, Q. Feng, J. Gayvert, Q. Ge, G. Gidofalvi, M. Goldey, J. Gomes, C. E. González-Espinoza, S. Gulania, A. O. Gunina, M. W. D. Hanson-Heine, P. H. P. Harbach, A. Hauser, M. F. Herbst, M. Hernández Vera, M. Hodecker, Z. C. Holden, S. Houck, X. Huang, K. Hui, B. C. Huynh, M. Ivanov, Á. Jász, H. Ji, H. Jiang, B. Kaduk, S. Kähler, K. Khistyaev, J. Kim, G. Kis, P. Klunzinger, Z. Koczor-Benda, J. H. Koh, D. Kosenkov, L. Koulias, T. Kowalczyk, C. M. Krauter, K. Kue, A. Kunitsa, T. Kus, I. Ladjánszki, A. Landau, K. V. Lawler, D. Lefrancois, S. Lehtola, R. R. Li, Y.-P. Li, J. Liang, M. Liebenthal, H.-H. Lin, Y.-S. Lin, F. Liu, K.-Y. Liu, M. Loipersberger, A. Luenser, A. Manjanath, P. Manohar, E. Mansoor, S. F. Manzer, S.-P. Mao, A. V. Marenich, T. Markovich, S. Mason, S. A. Maurer, P. F. McLaughlin, M. F. S. J. Menger, J.-M. Mewes, S. A. Mewes, P. Morgante, J. W. Mullinax, T. Nguyen-Beck, K. J. Oosterbaan, G. Paran, A. C. Paul, S. K. Paul, F. Pavoševic, Z. Pei, S. Prager, E. I. Proynov, Á. Rák, E. Ramos-Cordoba, B. Rana, A. E. Rask, A. Rettig, R. M. Richard, F. Rob, E. Rossomme, T. Scheele, M. Scheurer, M. Schneider, N. Sergueev, S. M. Sharada, W. Skomorowski, D. W. Small, C. J. Stein, Y.-C. Su, E. J. Sundstrom, Z. Tao, J. Thirman, G. J. Tornai, T. Tsuchimochi, N. M. Tubman, S. P. Veccham, O. Vydrov, J. Wenzel, J. Witte, A. Yamada, K. Yao, S. Yeganeh, S. R. Yost, A. Zech, I. Y. Zhang, X. Zhang, Y. Zhang, D. Zuev, A. Aspuru-Guzik, A. T. Bell, N. A. Besley, K. B. Bravaya, B. R. Brooks, D. Casanova, J.-D. Chai, S. Coriani, C. J. Cramer, G. Cserey, A. E. DePrince III, R. A. DiStasio Jr., A. Dreuw, B. D. Dunietz, T. R. Furlani, W. A. Goddard III, S. Hammes-Schiffer, T. Head-Gordon, W. J. Hehre, C.-P. Hsu, T.-C. Jagau, Y. Jung, A. Klamt, J. Kong, D. S. Lambrecht, W. Liang, N. J. Mayhall, C. W. McCurdy, J. B. Neaton, C. Ochsenfeld, J. A. Parkhill, R. Peverati, V. A. Rassolov, Y. Shao, L. V. Slipchenko, T. Stauch, R. P. Steele, J. E. Subotnik, A. J. W. Thom, A. Tkatchenko, D. G. Truhlar, T. Van Voorhis, T. A. Wesolowski, K. B. Whaley, H. L. Woodcock III, P. M. Zimmerman, S. Faraji, P. M. W. Gill, M. Head-Gordon, J. M. Herbert, and A. I. Krylov; Software for the frontiers of quantum chemistry: An overview of developments in the Q-CHEM 5 package; J. Chem. Phys. 155 (2021) 084801 (59 pages). [Citations: 170]

19. A. Thomas, C. Ji, B. Siddlingeshwar, P. Manohar, F. Ying and W. Wu; Revealing the biradicaloid nature inherited in the derivatives of thieno[3,4-c][1,2,5]thiadiazole: a computational study; Phys. Chem. Chem. Phys. 23 (2021) 1050-1061. [Citations: 1]

18. D. Kumar and P. ManoharAnalytical dipole moments and dipole polarizabilities of doublet radicals using Cholesky representation of constrained variational linear response to Fock-space multi-reference coupled-cluster method with single and double substitutions; Chem. Phys. Lett. 730 (2019) 234-238. 

17. A. Sharma, D. Kumar, P. Manohar, S. Pande, A. Dalvi and P. Shukla; Functionalized pyranopyrazole molecules as corrosion inhibitors for mild copper metal in HCl solution: synthesis, theoretical studies and physical investigations; Materials Res. Express 5 (2018) 025101. [Citations: 5]

16. D. Kumar, A.K. Dutta and P. ManoharResolution of the Identity and Cholesky Representation of EOM-MP2 Approximation: Implementation, Accuracy and Efficiency; J. Chem. Sci. 129 (2017) 1611-1626. [Citations: 4]

15. Y. Shao, Z. Gan, E. Epifanovsky, A.T.B. Gilbert, M. Wormit, J. Kussmann, A.W. Lange, A. Behn, J. Deng, X. Feng, D. Ghosh, M. Goldey, P.R. Horn, L.D. Jacobson, I. Kaliman, R.Z. Khaliullin, T. Kus, A. Landau, J. Liu, E.I. Proynov, Y.M. Rhee, R.M. Richard, M.A. Rohrdanz, R.P. Steele, E.J. Sundstrom, H.L. Woodcock III, P.M. Zimmerman, D. Zuev, B. Albrecht, E. Alguires, B. Austin, G.J.O. Beran, Y.A. Bernard, E. Berquist, K. Brandhorst, K.B. Bravaya, S.T. Brown, D. Casanova, C.-M. Chang, Y. Chen, S.H. Chien, K.D. Closser, D.L. Crittenden, M. Diedenhofen, R.A. DiStasio Jr., H. Do, A.D. Dutoi, R.G. Edgar, S. Fatehi, L. Fusti-Molnar, A. Ghysels, A. Golubeva-Zadorozhnaya, J. Gomes, M.W.D. Hanson-Heine, P.H.P. Harbach, A.W. Hauser, E.G. Hohenstein, Z.C. Holden, T.-C. Jagau, H. Ji, B. Kaduk, K. Khistyaev, J. Kim, J. Kim, R.A. King, P. Klunzinger, D. Kosenkov, T. Kowalczyk, C.M. Krauter, K.U. Laog, A. Laurent, K.V. Lawler, S.V. Levchenko, C.Y. Lin, F. Liu, E. Livshits, R.C. Lochan, A. Luenser, P. Manohar, S.F. Manzer, S.-P. Mao, N. Mardirossian, A.V. Marenich, S.A. Maurer, N.J. Mayhall, C.M. Oana, R. Olivares-Amaya, D.P. O'Neill, J.A. Parkhill, T.M. Perrine, R. Peverati, P.A. Pieniazek, A. Prociuk, D.R. Rehn, E. Rosta, N.J. Russ, N. Sergueev, S.M. Sharada, S. Sharmaa, D.W. Small, A. Sodt, T. Stein, D. Stuck, Y.-C. Su, A.J.W. Thom, T. Tsuchimochi, L. Vogt, O. Vydrov, T. Wang, M.A. Watson, J. Wenzel, A. White, C.F. Williams, V. Vanovschi, S. Yeganeh, S.R. Yost, Z.-Q. You, I.Y. Zhang, X. Zhang, Y. Zhou, B.R. Brooks, G.K.L. Chan, D.M. Chipman, C.J. Cramer, W.A. Goddard III, M.S. Gordon, W.J. Hehre, A. Klamt, H.F. Schaefer III, M.W. Schmidt, C.D. Sherrill, D.G. Truhlar, A. Warshel, X. Xu, A. Aspuru-Guzik, R. Baer, A.T. Bell, N.A. Besley, J.-D. Chai, A. Dreuw, B.D. Dunietz, T.R. Furlani, S.R. Gwaltney, C.-P. Hsu, Y. Jung, J. Kong, D.S. Lambrecht, W.Z. Liang, C. Ochsenfeld, V.A. Rassolov, L.V. Slipchenko, J.E. Subotnik, T. Van Voorhis, J.M. Herbert, A.I. Krylov, P.M.W. Gill, and M. Head-Gordon; Advances in molecular quantum chemistry contained in the Q-Chem 4 program package; Mol. Phys. 113 (2015) 184-215. [Citations: 2555]

14. A.K. Dutta, P. Manohar, N. Vaval and S. Pal; Ground state of Naphthyl cation: Singlet or Triplet?; J. Chem. Phys. 140 (2014) 114312 (12 pages). [Citations: 3]

13. E. Epifanovsky, M. Wormit, T. Ku, A. Landau, D. Zuev, K. Khistyaev, P. Manohar, I. Kaliman, A. Dreuw and A. Krylov; New implementation of high-level correlated methods using a general block-tensor library for high-performance electronic structure calculations; J. Comp. Chem. 34 (2013) 2293-2309. [Citations: 154]

12. J. Gupta, P. Manohar, A. Ghosh, N. Vaval and S. Pal; Extended coupled cluster through nth perturbation order for molecular response properties: A comparative study; Chem. Phys. 417 (2013) 45-51.

11P. Manohar, L. Koziol and A.I. Krylov; Erratum: Effect of a heteroatom on bonding patterns and triradical stabilization energies of 2,4,6-tridehydropyridine versus 1,3,5-tridehydrobenzene  114 (2010) 6558.

10P. Manohar, J.F. Stanton and A.I. Krylov; Perturbative triples correction for the equation-of-motion coupled-cluster wave functions with single and double substitutions for ionized states: Theory, implementation and examples; J. Chem. Phys. 131 (2009) 114112 (13 pages). [Citations: 61]

9. A. Bag, P. Manohar, N. Vaval and S. Pal; First- and second-order electrical properties computed at the FSMRCCSD level for excited states of closed-shell molecules using the constrained-variational approach; J. Chem. Phys.131 (2009) 024102 (8 pages). [Citations: 41]

8P. Manohar, L. Koziol and A.I. Krylov; Effect of a heteroatom on bonding patterns and triradical stabilization energies of 2,4,6-tridehydropyridine versus 1,3,5-tridehydrobenzene; J. Phys. Chem. A 113 (2009) 2591-2599. [Citations: 23]

7P. Manohar and A.I. Krylov; A non-iterative perturbative triples correction for the spin-flipping and spin-conserving equation-of-motion coupled-cluster methods with single and double substitutions ; J. Chem. Phys. 129 (2008) 194105 (10 pages). [Citations: 152]

6P. Manohar and S. Pal; Constrained variational response to Fock-space multi-reference coupled-cluster theory: Formulation for excited-state electronic structure calculations and some pilot results ; AIP Conf. Proc (ICCMSE) 963 (2007) 337-344. [Citations: 2]

5. A. Bag, P. Manohar and S. Pal; Analytical dipole moments and dipole polarizabilities of oxygen monofluoride and nitrogen dioxide: A constrained variational response to Fock-space multi-reference coupled-cluster method; Comp. Lett. (2007) 351-358. [Citations: 14]

4P. Manohar and S. Pal; Dipole moments and polarizabilities of some small radicals using constrained variational response to Fock-space multi-reference coupled-cluster theory; Chem. Phys. Lett. 438 (2007) 321-325. [Citations: 30]

3P. Manohar, N. Vaval and S. Pal; Constrained variational response to Fock-space multi-reference coupled-cluster theory: Some pilot applications; J. Mol. Struct. THEOCHEM. 768 (2006) 91-96. [Citations: 17]

2. N. Vaval, P. Manohar and S. Pal; Electronic Spectra and Ionization Potentials of Halogen oxides using the Fock-space coupled-cluster method; Collect. Czech. Chem. Commun. 70 (2005) 851-863. [Citations: 3]

1P. Manohar, N. Vaval and S. Pal; Extended coupled-cluster approach for magnetizabilities of small molecules; Chem. Phys. Lett. 387 (2004) 442-447. [Citations: 14]


Book Chapters

1P. Manohar, K.R. Shamasundar, A. Bag, N. Vaval and S. Pal; On some aspects of Fock space multi-reference coupled-cluster singles and doubles energies and optical properties; Chapter 14 in “Recent Progress in coupled cluster methods: Theory and Applications, Series: Challenges and Advances in Computational Chemistry and Physics, Vol11” (2010) pp. 375-393, (Springer) Edited by P. Carsky, J. Paldus and J. Pittner. [Citations: 3 (GoogleScholar); 3 (Scopus); 3 (ResearchGate)]

 

Book Chapters

  1. Palanisamy Periasamy, Murthy Chavali, Enamala Manoj Kumar, Krishna Chaitanya Etika, "Hybrid nanocomposites and their potential applications in the field of nanosensors /gas and biosensors, Chapter 10, In the book titled "Nanofabrication for Smart Nanosensor Applications", edited by K.Pal and F. Gomes, Elsevier Publishers/2020; ISBN: 9780128207024.

Peer-Reviewed Journal Publications

  1. B.R.Kumar and K.C. Etika*, "Large Microwave Absorption By Fe3O4@CuNW Hybrid Nanoparticles Filled Epoxy Nanocomposites In The X-Band", Journal of Alloys and Compounds, Volume 938, 25 March 2023, 168405
  2. B.R. Kumar and K.C.Etika*, "The influence of hybrid decorated structures on the EMI shielding properties of epoxy composites over the X-Band", Materials Today Proceedings, 2023, Accepted, (Online) (article in press)
  3. I.Dogra, B.R.Kumar, K.C. Etika, M.Chavali, A.S.Khalifa, A.F. Gharib, A.E Askary, "Environmentally friendly low-cost graphene oxide-cellulose nanocomposite filter for dye removal from water, Journal of King Saud University - Science, Volume 34, Issue 5, 2022
  4. R.K.Bheema, A.K. Ojha, A.V.P.Kumar and K.C.Etika*, "Synergistic influence of barium hexaferrite nanoparticles for enhancing the EMI shielding performance of GNP/epoxy nanocomposites", J Mater Sci 57, 8714–8726, 2022.
  5. R.K. Bheema and K.C. Etika* “Facile One-Pot Hydrothermal Synthesis of Copper Nanowires and Their Impact on the EMI Shielding Capability of Epoxy Composites”, Chem. Eng. Technol. 2022, 45, No. 3, 410–416.
  6. R K.Bheema, K.K.Vuba, N.Etakula, K.C. Etika*, "Enhanced thermo-mechanical, thermal and EMI shielding properties of MWNT/MAgPP/PP nanocomposites prepared by extrusion", Composites Part C,4, 1-7, 2021.
  7. K. Bhaskaran, R.K. Bheema, K.C.Etika*, "The influence of Fe3O4@GNP hybrids on enhancing the EMI shielding effectiveness of epoxy composites in the X-band", 2020, Synthetic Metals 265, 116374.
  8. VU Varun, BR Kumar, K.C.Etika*, "Hybrid polymer nanocomposites as EMI shielding materials in the X-band" 2020, Materials Today: Proceedings, Vol 28, 2, 796.
  9. V Chavhan, Md, K.C. Etika and A Mukhopadhyay, "The Design of Personnel ProtectiveClothing For Protection Against Cbrn Agents: A Review", 2018 Filtration 18 (2), 98-117.
  10. K.C.Etika#, L. Liu, M.Cox, and J.C. Grunlan, Clay Compatibilized Carbon Nanotubes inPoly(N-Isopropylacrylamide), Colloids and Surfaces A: Physiological and EngineeringAspects, 2016, vol. 489, pp 19-26.
  11. K.C.Etika#, F.D.Jochum, M.A.Cox, P.Schattling, P.Theato and J.C.Grunlan, NanotubesFriendly Poly(N-Isopropylacrylamide), Macromolecular Rapid Communications 2010,vol. 31, pp. 1368-1372.
  12. K.C.Etika#, F.D.Jochum, M.A.Cox, P.Theato and J.C.Grunlan, Tailoring Properties of Carbon Nanotube Dispersions And Nanocomposites Using Temperature-Responsive Copolymers Of Pyrene Modied Poly (N-Cyclopropylacrylamide), Macromolecules 2010, vol.43, pp. 9447. 
  13. K.C.Etika#, M.A.Cox and J.C.Grunlan, Tailored Dispersion of Carbon Nanotubes in Water with pH-Responsive Polymers Polymer 2010, vol. 51, pp. 1761-1770.
  14. K.C.Etika#, F.D.Jochum, P.Theato and J.C.Grunlan, Temperature Controlled Dispersionof Carbon Nanotubes In Water With Pyrene-Functionalized Poly (N-Cyclopropylacrylamide), Journal of the American Chemical Society 2009, vol. 131, pp.13598-13599.
  15. K.C.Etika#, L.Liu, L.A.Hess and J.C.Grunlan, The Influence of the SynergisticStabilization of Carbon Black and Clay On The Electrical And Mechanical Properties Of Epoxy Composites, Carbon 2009, vol. 47, pp. 3128-3126. 
  16. L.Liu, K.C.Etika, K-S.Liao, A.J.Stephenson, D.E.Bergbreiter and J.C.Grunlan, Comparison of Covalently and Noncovalently Functionalized Carbon Nanotubes in Epoxy Macromolecular Rapid Communications 2009, vol. 30, pp. 627.

Publications

Journals

  • Tanmaya Mahapatra, Nikolaos Tsiamitros, Anton Moritz Rohr, Kailashnath K, Georgios Pipelidis, Pedestrian augmented reality navigator, Sensors 23 (4), 1816, 2023
  • Nikolaos Tsiamitros, Tanmaya Mahapatra, Ioannis Passalidis, Kailashnath K, Georgios Pipelidis, Pedestrian flow identification and occupancy prediction for indoor areas, Sensors 23 (9), 4301, 2023
  • Tanmaya Mahapatra and Syeeda Nilofer Banoo, Flow-Based Programming for Machine Learning, Future Internet 14 (2), 58, Future Internet, 2022
  • Tanmaya Mahapatra, Composing high-level stream processing pipelines, Springer Journal of Big Data 7 (1), 81, 2020
  • Tanmaya Mahapatra and Christian Prehofer, Graphical flow-based spark programming, Springer Journal of Big Data 7 (1), 4, 2020
  • Helmut Spengler, Claudia Lang, Tanmaya Mahapatra, Ingrid Gatz, Klaus A Kuhn, Fabian Prasser, Enabling Agile Clinical and Translational Data Warehousing: Platform Development and Evaluation, JMIR Medical Informatics 8 (7), e15918, 2020
  • Tanmaya Mahapatra and  Christian Prehofer, aFlux: Graphical flow-based data analytics, Software Impacts 2, 100007, 2019

 

 

Publications

Book Publications

[1] A. Mishra, Special Integrals, to appear in the Springer book series: University Texts in the Mathematical Sciences, (2024). The book is based on a manuscript I wrote in 1997 (available online at https://www.amishra.in/integrals).

Journal Publications

[2] A. Mishra, P. Trivedi, Benchmarking the Contention Aware Nature Inspired Metaheuristic Task Scheduling Algorithms, Cluster Computing, 23(2), 537–553 (2020).

[3] R. Sharma, B. Adhikari, A. Mishra, Structural and Spectral Properties of Corona Graphs, Discrete Applied Mathematics, 228, 14–31 (2017).

[4] A. Mishra, P. K. Mishra, A Randomized Scheduling Algorithm for Multiprocessor Environments using Local Search, Parallel Processing Letters, 26(1), 1650002, (2016).

[5] A. Mishra, A. K. Tripathi, Complexity of a Problem of Energy Efficient Real-Time Task Scheduling on a Multicore Processor, Complexity, 21(1), 259–267 (2015).

[6] A. Mishra, A. K. Tripathi, Energy Efficient Voltage Scheduling for Multi-Core Processors with Software Controlled Dynamic Voltage Scaling, Applied Mathematical Modelling, 38, 3456–3466, (2014).

[7] A. Mishra, A. K. Tripathi, A Monte Carlo Algorithm for Real Time Task Scheduling on Multi-Core Processors with Software Controlled Dynamic Voltage Scaling, Applied Mathematical Modelling, 38, 1929–1947, (2014).

[8] P. K. Mishra, A. Mishra, K. S. Mishra, A. K. Tripathi, Benchmarking the Clustering Algorithms for Multiprocessor Environments using Dynamic Priority of Modules, Applied Mathematical Modelling, 36, 6243–6263, (2012).

[9] P. K. Mishra, K. S. Mishra, A. Mishra, A. K. Tripathi, A Randomized Scheduling Algorithm for Multiprocessor Environments, Parallel Processing Letters, 22(4), 1250015, (2012).

[10] P. K. Mishra, K. S. Mishra, A. Mishra, A Clustering Algorithm for Multiprocessor Environments using Dynamic Priorities of Modules, Annales Mathematicae et Informaticae, 38, 99-110, (2011).

[11] A. Mishra, A. K. Tripathi, An Extension of Edge Zeroing Heuristic for Scheduling Precedence Constrained Task Graphs on Parallel Systems using Cluster Dependent Priority Scheme, Journal of Information and Computing Science, 6(2), 83–96, (2011).

[12] A. Mishra, A. K. Tripathi, Energy Efficient Task Scheduling of Send-Receive Task 2 Graphs on Distributed Multi-Core Processors with Software Controlled Dynamic Voltage Scaling, International Journal of Computer Science & Information Technology, 3(2), 204– 210, (2011).

[13] P. K. Mishra, K. S. Mishra, A. Mishra, A Clustering Heuristic for Multiprocessor Environments using Computation and Communication Loads of Modules, International Journal of Computer Science & Information Technology, 2(5), 170–182, (2010).

Conference Publications

[14] R. Kant, A. Mishra, The Multi-Depot Multiple Set Orienteering Problem: An Integer Linear Programming Formulation, in Proceedings of the 13th International Conference on Operations Research and Enterprise Systems (ICORES 2024), 350–355 (2024).

[15] R. Kant, A. Mishra, S. Sharma, The Single Depot multiple Set Orienteering Problem, in Proceedings of the 12th International Conference on Operations Research and Enterprise Systems (ICORES 2023), 175–179 (2023).

[16] R. Kant, A. Mishra, A Compact Formulation for the mDmSOP: Theoretical and Computational Time Analysis, in Proceedings of the 11th International Conference on Frontiers of Intelligent Computing: Theory and Applications (FICTA 2023), 115–124 (2023).

[17] R. Kant, A. Mishra, The Orienteering Problem: A Review of Variants and Solution Approaches, in Proceedings of the 26th World Multi-Conference on Systemics, Cybernetics and Informatics (WMSCI 2022), 41–46 (2022).

[18] S. Pratik, A. Mishra, A Simulated Annealing Based Energy Efficient Task Scheduling Algorithm for Multi-Core Processors, in Proceedings of the 13th International Joint Conference on Computational Intelligence (IJCCI 2021), 81–87 (2021).

[19] A. Mishra, K. S. Mishra, P. K. Mishra, Performance Evaluation of Simulated Annealing Based Task Scheduling Algorithms, in the Springer Proceedings of Information Management and Machine Intelligence, 145–152 (2021).

[20] R. Sharma, B. Adhikari, A. Mishra, On Spectra of Corona Graphs, in Proceedings of Conference on Algorithms and Discrete Applied Mathematics, Lecture Notes in Computer Science, Springer, Volume 8959, 126–137 (2015).

[21] A. Mishra, A. K. Tripathi, An Extention of Edge Zeroing Heuristic for Schedulin Precedence Constrained Task Graphs on Parallel Systems using Cluster Dependent Priority Scheme, in Proceedings of IEEE International Conference on Computer & Communication Technology (ICCCT’10), 647–651, (2010).


Publications

Journal Publications

  1. A. Gautam and S. Mohan, "STATE: Distributed algorithm for uniform circle formation by multiple mobile robots", Intelligent Service Robotics, vol. 9, no. 4, pp. 347-366, 2016.

  2. A. Gautam, B. Jha, G. Kumar, J. Murthy, S. Ram and S. Mohan, "FAST: Synchronous Frontier Allocation for Scalable Online Multi-Robot Terrain Coverage", Journal of Intelligent & Robotic Systems, vol. 87, no. 3-4, pp. 545-564, 2016.

  3. C. S. Vorugunti, V. Pulabaigari, P. Mukherjee, and A. Gautam, “COMPOSV: compound feature extraction and depthwise separable convolution-based online signature verification,” Neural Computing and Applications, vol. 34, no. 13. Springer Science and Business Media LLC, pp. 10901–10928, 26-Feb-2022.

International Conference Publications [Held Abroad]

  1. A. Soni, C. Dasannacharya, A. Gautam, V. S. Shekhawat and S. Mohan, "Multi-Robot Unknown Area Exploration Using Frontier Trees," 2022 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS 2022), 2022, pp. 9934-9941. Kyoto, Japan.

  2. V. S. Shekhawat and A. Gautam, "De-COP: A Decentralized Community Convergence Approach for Message Forwarding in Pocket Switched Networks," 2022 IEEE International Conference on Systems, Man, and Cybernetics (SMC 2022), 2022, pp. 2334-2341. Prague, Czech Republic.

  3. A. Gautam, A. Soni, V. Singh Shekhawat and S. Mohan, "Multi-Robot Online Terrain Coverage under Communication Range Restrictions – An Empirical Study," 2021 IEEE 17th International Conference on Automation Science and Engineering (CASE 2021), pp. 1862-1869, Lyon, France.

  4. Virendra Singh Shekhawat, Ankur Vineet, Avinash Gautam, "Efficient Content Caching for Named Data Network Nodes", 16th EAI International Conference on Mobile and Ubiquitous Systems: Computing, Networking and Services (MobiQuitous 2019). November 12-14, 2019, Houston, United States.

  5. A. Gautam, V. S. Shekhawat and S. Mohan, "A Graph Partitioning Approach for Fast Exploration with Multi-Robot Coordination," 2019 IEEE International Conference on Systems, Man and Cybernetics (SMC 2019), 2019, pp. 459-465. Bari, Italy.

  6. A. Gautam, A. Richhariya, V. S. Shekhawat and S. Mohan, "Experimental Evaluation of Multi-Robot Online Terrain Coverage Approach," 2018 IEEE International Conference on Robotics and Biomimetics (ROBIO), 2018, pp. 1183-1189. Kuala Lumpur, Malaysia.

  7. A. Gautam, S. P. A. Ram, V. S. Shekhawat and S. Mohan, "Balanced partitioning of workspace for efficient multi-robot coordination," 2017 IEEE International Conference on Robotics and Biomimetics (ROBIO), 2017, pp. 104-109. Macau, China.

  8. A. Gautam, J. K. Murthy, G. Kumar, S. P. A. Ram, B. Jha and S. Mohan, "Cluster, Allocate, Cover: An Efficient Approach for Multi-robot Coverage," 2015 IEEE International Conference on Systems, Man, and Cybernetics, 2015, pp. 197-203. Kowloon, HongKong.

International Conference Publications [Held in India]

  1. Chandra Sekhar, Balasubramanian S, Avinash Gautam and Viswanath Pulabaigari, "Impact of Type of Convolution Operation on Performance of Convolutional Neural Networks for Online Signature Verification," 18th International Conference on Frontiers of Handwriting Recognition (ICFHR2022.

  2. Chandra Sekhar, Balsubramanian Subramanian, Prerana Mukherjee and Avinash Gautam, "COMPOSV++: Light Weight Online Signature Verification Framework through Compound Feature Extraction and Few-shot Learning," 18th International Conference on Frontiers of Handwriting Recognition (ICFHR2022.

  3. V. S. Shekhawat, A. Gautam and A. Thakrar, "Datacenter Workload Classification and Characterization: An Empirical Approach," 2018 IEEE 13th International Conference on Industrial and Information Systems (ICIIS), Rupnagar, India, 2018, pp. 1-7.

  4. A. Gautam, A. Thakur, G. Dhanania and S. Mohan, "A distributed algorithm for balanced multi-robot task allocation," 2016 11th International Conference on Industrial and Information Systems (ICIIS), Roorkee, 2016, pp. 622-627.

  5. A. Gautam, A. U. Saxena, P. Mall and S. Mohan, "Positioning multiple mobile robots for geometric pattern formation: An empirical analysis," 2014 Seventh International Conference on Contemporary Computing (IC3), Noida, 2014, pp. 607-612.

  6. A. Gautam and S. Mohan, "A distributed algorithm for circle formation by multiple mobile robots," 2013 International Conference on Control, Automation, Robotics and Embedded Systems (CARE), Jabalpur, 2013, pp. 1-5.

  7. A. Gautam, S. Mohan and V. S. Shekhawat, "A token passing approach for circle formation by multiple mobile robots," 2013 Sixth International Conference on Contemporary Computing (IC3), Noida, 2013, pp. 522-527.

  8. A. Gautam and S. Mohan, "A review of research in multi-robot systems," 2012 IEEE 7th International Conference on Industrial and Information Systems (ICIIS), Chennai, 2012, pp. 1-5.

  9. A. Gautam, S. Mohan and J. P. Misra, "A practical framework for uniform circle formation by multiple mobile robots," 2012 IEEE 7th International Conference on Industrial and Information Systems (ICIIS), Chennai, 2012, pp. 1-5.


PUBLICATIONS & REVIEWERS’ INFORMATION

Publications:

66 research papers with research work has been accepted / published in reputed International conferences, Book chapters, and Journals like Elsevier, Taylor & Francis, ASME, IMechE, Springer, Physics of Fluids etc. He published papers in well known - reputed International conferences held at IITs, IISc Bangalore, conferences held at abroad - at Imperial College London UK, Bangkok Thiland, Krakow Poland, USA, Seoul South Korea, Dubai- UAE, Cairo & Luxor - Egypt etc.

 

1 Patent filed (Application no. 202221026060) on 4th May 2022 on A CENTRIFUGAL PUMP IMPELLER by GANGIPAMULA Rajavamsi, BIRAJDAR RAVINDRA  SHARANAPPA,RANJAN  Pritanshu, PATIL Ranjit  Shankarrao. [Jointly by BITS Pilani and Kirloskar Brothers Limited Pune].

 

1 Patent ACCPETED (Grant of Design No: 416367-001 dated 09/05/2024) on Solar Dryer Integrated with Thermal Energy Storage for Agricultural and Marine Products Drying by RANJIT S PATIL and BHANUDAS B. TAKALE

  

 

Total 66 = Research Papers (36) + Book Chapter (1)  + International Conferences (21) + National Conferences (8).                                                            

 

 

Research Papers(Journal Papers [#36 to 15] +  Proceeding Full Length Papers [#14 to 1])  

 

36) Rajavamsi Gangipamula, Pritanshu Ranjan, Ranjit S Patil, "Comparative Studies on Air Borne Noise and Flow Induced Noise of a Double Suction Centrifugal Pump", Applied Acoustics,202, 109148, 2023.
(Elsevier Journal)[Impact Factor: 3.614] [SCI and Scopus].     

 

 

35) Abhilash K Tilak, Ranjit S Patil, Anupam Dewan, " Experimental and Computational Investigations on Microchannel Heat Sinks with Novel ITSCEB Cross-Section",  Heat and Mass Transfer, (Accepted for publication), DOI: 10.1007/s00231-022-03320-0, 2022.      

(Springer Journal)[Impact Factor: 2.325] [SCI and Scopus].     

 

34) Rajavamsi Gangipamula, Pritanshu Ranjan, Ranjit S Patil, "Study of Rotor-Stator Interaction Phenomenon in a Double Suction Centrifugal Pump with Impeller Vane Trailing Edge as a Design Parameter", Physics of Fluids, 34 (9), 2022.     https://doi.org/10.1063/5.0105576 

(American Institute of Physics Journal)[Impact Factor: 4.60] [SCI and Scopus].     

 

33) Rajavamsi Gangipamula, Pritanshu Ranjan, Ranjit S Patil, "Flow-Induced Noise Sources And Reduction Methods In Centrifugal Pumps: A Literature Review ", Physics of Fluids, 34, 081302, 2022.      

(American Institute of Physics Journal)[Impact Factor: 4.60] [SCI and Scopus].     

 

32) Rajavamsi Gangipamula, Pritanshu Ranjan, Ranjit S Patil, "Study on Fluid Dynamic Characteristics of a Low Specific Speed Centrifugal Pump with Emphasis on Trimming Operations", International Journal of Heat and Fluid Flow, 95, 108952, 2022.
(Elsevier Journal)[Impact Factor: 2.789] [SCI and Scopus].     

 

31) Abhilash K Tilak, Ranjit S Patil, "Investigations on the Thermohydraulic Performance of Novel ITSCEB Microchannel Heat Sink using Al2O3 Nanofluid", Computational Thermal Sciences2022.                                                                                                                 (Begell House Journal)[Impact Score: 1.03] [ESCI and Scopus].

 

30) Vishal V Patil, Ranjit S Patil, "Investigations on Effects of Varying Ignition Delay Period for the Sunflower Oil Methyl Ester", Journal of Institution of Engineers (India): Series C, https://doi.org/10.1007/s40032-021-00779-4, 2021. 

(Springer Journal)[Impact Factor: 2.1, https://academic-accelerator.com/Real-Time-Impact-Factor/Journal-of-The-Institution-of-Engineers-India-Series-C] [Scopus].  

 

29) Mahesh Dasar, Ranjit S Patil, "Hydrodynamic Characteristics of a 2D2D Cyclone Separator with a Finned Cylindrical Body", Powder Technology, 363, 541-558, 2020. 

(Elsevier Journal) [Impact Factor: 5.134] [SCI and Scopus].  

 

28) Abhilash K Tilak, Ranjit S Patil, "Study of Effects of Novel Cross-Sections of Microchannel Heat Sink on Thermohydraulic Performance", Journal of Heat Transfer, 142(4), 044506, 2020. 

(ASME Journal)[Impact Factor: 2.021] [SCI and Scopus].  

 

27)  Vishal V. Patil, Ranjit S. Patil, “Experimental Investigations to Predict Optimistic Biodiesel(s) and its Optimistic Operating Conditions by Varying Ignition Delay Period and Fuel Spray Pressures for Lower Emissions and Better Performance”, Journal of Mechanical Engineering Science,  234 (19), 3809-3902, 2020.
(IMechE Journal - Part C, Sage Publications), [Impact Factor: 1.762] [SCI and Scopus]. 

  

26) Tilak A.K., Patil R.S., 2019. "Effect of Chitosan Surfactant Concentration on the Thermal Conductivity and Viscosity of Al2O3 + CNT Hybrid Nanofluid", Journal of Physics: Conference Series, 1455, 012004, 2020.                             

(Journal of Institute of Physics),                                                                                               [Impact Score: 0.55 - https://www.resurchify.com/impact/details/130053]
 [ScopusCPCI (Conference Proceedings Citation Index].

 

25)  Mahesh Dasar, Ranjit S. Patil, “Effects of Helical Fins with Semi-Circular in Cross-Section on the Performance Characteristics of Novel Finned Cyclone Separators”, Journal of Mechanical Engineering Science, 234 (17), 3509 -3520, 2020

(IMechE Journal - Part C, Sage Publications), [Impact Factor: 1.762] [SCI and Scopus].

 

24) Mahesh Dasar, Ranjit S Patil, "Studies on Separation Efficiency and Energy Conservation through Novel Finned Cyclone Separator", Journal of Heat Transfer, 142(4),042104, 2020. 

(ASME Journal), [Impact Factor: 2.021] [SCI and Scopus]. 

 

23) Samyak Jain and Ranjit S Patil, “Numerical Simulation of Novel Nozzle Intake Manifold”, Journal of Physics: Conference Series, 1276, 012037, 2019.  [Impact Score: 0.55]
(Journal of Institute of Physics), [Scopus, CPCI (Conference Proceedings Citation Index].

  

22) Mahesh Dasar, Ranjit S. Patil, "Investigations on Various Characteristics of Novel Cyclone Separator with Helical Square Fins," Separation Science and Technology,(https://doi.org/10.1080/01496395.2019.1650770), 55 (16), 2994-3011, 2019.
(Taylor & Francis Journal. Separation Science and Technology is 119 years old journal, established in year 1900, publishes work related to cyclone separators and other similar novel equipments, design, processes etc), [Impact Factor: 2.475] [SCI and Scopus]. 

 

21)  V. V. Patil, R. S. Patil, “Effects of Partial Addition of Butanol in Rubber seed Oil Methyl Ester Diesel Blend”, Journal Materials Today: Proceedings, 5 (11 – part 2), 23119-23127, 2018.                 (Elsevier Journal), [Impact Score: 1.24], [Scopus].

 

20) Vishal V. Patil, Ranjit S. Patil, “Investigations on Partial Addition of N-Butanol in Sunflower Oil Methyl Ester Powered Diesel Engine”, Journal of Energy Resources Technology, 140(1), 012205, 2017
(ASME Journal),  [Impact Factor: 3.183] [SCI and Scopus].

 

19) Vishal V. Patil, Ranjit S. Patil, “Effects of Partial Addition of N-Butanol in Rubber seed Oil Methyl Ester Powered Diesel Engine”, Journal of Power and Energy, 231 (7), 607-617, 2017.   (IMechE Journal - Part A, Sage Publications),  [Impact Factor: 1.882] [SCI and Scopus].
                      

18) R.S. Patil, M. Pandey, P. Mahanta,"Parametric Studies and Effect of Scale-up on Wall-to-Bed Heat Transfer Characteristics of Circulating Fluidized Bed Risers", Experimental Thermal and Fluid Science, 35(3), 485-494, 2011.                                                   (Elsevier Journal), [Impact Factor: 3.444] [SCI and Scopus].

 

 

17) R.S. Patil, P. Mahanta, M. Pandey, "Effect of Scale-up on Heat Transfer Characteristics of Cyclone Separators of Circulating Fluidized Beds", International Energy Journal, 11(3), 123-130, 2010.                                                                                                        (International Energy Journal),[Impact Factor: 0.70], [ESCI and Scopus].                                                                                                                                                                                                                                                                                   

16)  R.S. Patil, M. Pandey, P. Mahanta, "Effect of Scale-up on Lower and Middle Splash Region on Heat Transfer Characteristics of Circulating Fluidized Bed Risers", Journal of Power and Energy224(8),1059-1068,2010.                                                                      (IMechE Journal - Part A, Sage Publications), [Impact Factor: 1.882] [SCI and Scopus].

 

15) R.S. Patil, M. Pandey, P. Mahanta, "Effect of Scale-up on Heat Transfer Characteristics in Upper Splash Region of Circulating Fluidized Bed Risers", Journal of Energy and Power Engineering, (David Publications USA),04(6),9-15,2010.

 
14) Parag P. Mangave, Vishal V. Patil, Nilesh D. Pawar and Ranjit S. Patil, "Experimental investigations on emissions and performance of a spark-ignition engine fuelled with butanol-pentane-gasoline blends",9th International and 49th National Conference on Fluid Mechanics and Fluid Power (FMFP 2022), IIT Roorkee, 14-16th December 2022. [Lectrue Notes in Mechanical Engineering, Springer Proceedings published in year 2024DOI : https://doi.org/10.1007/978-981-99-7177-0]
 
 
13) Bhanudas B. Takale, Ranjit S. Patil, "Comparative Study of the Pyramid-Shaped Tunnel and Cabinet Dryer for Drying Coriander Leaves", IEEE Conference on Power Electronics and Renewable Energy, Luxor, Egypt., 19-21 February 2023 [IEEE CONFERENCE PROCEEDINGS2023,  DOI: 10.1109/CPERE56564.2023.10119581
 

 

12) Tilak A.K., Patil R.S., 2021. "Effect of aspect ratio on flow and heat transfer in rectangular and novel ITSCEB microchannel heat sinks". Proc. 48th National Conference on Fluid Mechanics and Fluid Power (FMFP), December 27-29, 2021, BITS Pilani, Pilani Campus, Rajasthan, India. Paper ID-FMFP_2021-07-054,2021. Springer Nature Singapore Pte Ltd. 2023,  S. Bhattacharyya and H. Chattopadhyay (eds.), Fluid Mechanics and Fluid Power (Vol. 1), Lecture Notes in Mechanical Engineering, https://doi.org/10.1007/978-981-19-7055-9_43, 2023. (SCOPUS)
 

11) Rajavamsi Ganglipamula, Pritanshu Ranjan, Ranjit S. Patil, “Influence of the Blade Design Parameters on Hydrulic Noise Generation by a Low Specific Speed Radial Pump with Narroe Channel Flow", ASME 2021 Fluids Engineering Division Summer Meeting, ONLINE mode, 1st October 2021. (ASME Proceeding). Paper No. FEDSM2021-65670, V002T03A035; 9 pagesDOIhttps://doi.org/10.1115/FEDSM2021-65670                                (ASME Proceeding Paper) (SCOPUS)

 

10) Satish S Mullya, G Karthikeyan, Ranjit S Patil, Rajkumar B Patil, “Observation at the Interelectrode of Micro Electric Discharge Milling”, ASME 2020 15th International Manufacturing Science and Engineering Conference, ONLINE mode, 15th January 2021. (ASME Proceeding). Paper No. MSEC2020-8280, V002T06A018; 6 pagesDOIhttps://doi.org/10.1115/MSEC2020-8280

(ASME Proceeding Paper) (SCOPUS)

 

 

9) Tilak A.K., Patil R.S., 2019. "Entropy Generation Analysis of a Microchannel Heat Sink with Al2O3 and CNT Nanofluid". Proc. 25th National and 3rd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2019),IIT Roorkee, December 28-31, 2019, Roorkee, India. Paper ID-IHMTC2019-POS-137. (http://ishmtdigitallibrary.com/conferences/18a7131602a3b186,7a56f09f53571cac,0bea0f425715c826.html)

 (ISHMT Digital Library Paper). 

 

8) Vishal V. Patil, Ranjit S. Patil, “Effect of Exhaust Gas Recirculation on Various Characteristics Of Diesel Engine Powered By Rubber Seed Oil Methyl Ester-Butanol Blend”,24thNational and 2nd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2017),BITS Pilani and IIT – Hyderabad, 27-30th December 2017DOI:10.1615/IHMTC-2017.1950. (ISHMT Digital Library. Begell Digital Library Paper1413-1418).

 

7) Mahesh Dasar, Ujash Shah, PraharshPaiRaikar, RanjitPatil, “Computational Studies on Effect of Novel Accelerating Perforated Distributor on Fluid Dynamic Characteristics of Circulating Fluidized Bed Riser”, Proceedings of 12th International Conference on Fluidized Bed Technology (CFB-12), Krakow - Poland325-332, 23- 26th May 2017, (SCOPUS). 

 
6) Satish A Mullya, G Karthikeyan, Ranjit S Patil, “ Study of Molten Metal Flow and Debris Movement at Inter Electrode Gap in Micro Electric Discharge Milling Process using CFD", The Conference on Precision Engineering (COPEN) 10, IIT Madras, 2017.

 

5) M. G. Kalola, Mahesh Dasar, K. P. Shete, R. S. Patil, “Effect of Novel Swirling Perforated Distributor on Fluid Dynamic Characteristics of Circulating Fluidized Bed Riser”, ASME 2016 Power and Energy Conference, Charlotte Convention Center Charlotte, North Carolina, USA, 26- 30th June 2016. (ASME Proceeding). Paper No. POWER2016-59165, V001T11A005; pages, DOI:10.1115/POWER2016, (ASME Proceeding Paper) (SCOPUS).

 

4) R.S. Patil, P. Mahanta, and M. Pandey, “Effect of Superficial Velocity of Air and Riser Cross Sectional Area Heat Transfer Characteristics of Circulating Fluidized Bed”, International Association of Engineers (IAENG)-World Congress on Engineering 2014, International Conference of Mechanical Engineering (ICME'14), Imperial College London - UK1425-1430, 2-4th July 2014,(SCOPUS). 

 

3) G. N. Shelke, P. Mahanta, and R. S. Patil, “Experimental Studies on Thermal Behavior of Downdraft Gasifier”, International Association of Engineers (IAENG)-World Congress on Engineering 2014, International Conference of Mechanical Engineering (ICME'14), Imperial College London - UK1356-1359, 2-4th July 2014, (SCOPUS). 

 

2) P. Mahanta, R.S. Patil, M. Pandey, "Effect of Particle Size and Bed Inventory on Wall-to-Bed Heat Transfer Characteristics of Circulating Fluidized Bed Risers", Lecture Notes in Engineering and Computer Science, IAENG Publications UK2184(1),1495-1500, 2010 (SCOPUS). 

 

1) R.S. Patil, M. Pandey and P. Mahanta, “Study on the Heat Transfer Characteristics in the Lower Splash Region of Circulating Fluidized Bed Riser”, 7th World Conference on Experimental Heat Transfer, Fluid Mechanics and Thermodynamics (Proceeding ExHFT-7), Krakow - Poland, 555-562, 28th June – 3rd July 2009.

 

  

Book Chapter(Total 1)

 

1) Ranjit S. Patil, Pinakeswar Mahanta, and Manmohan Pandey, “Experimental and Computational  Studies on Effects of Scale-up of Riser on Heat Transfer Characteristics of Circulating Fluidized Bed”, Transactions on Engineering Technologies,Ch.19, 289-304, 2014. (Springer Book).

                                                   

 

International Conferences:  (Total 21)

 
21) Bhanudas B. Takale, Ranjit S. Patil, "Preparation and Characterization of CuO Nanoparticles Dopped Paraffin Wax composite for Solar Thermal Energy Storage in the Solar Drying Application", 9th International Conference on Advances in Energy Research (ICAER) at IIT Bombay from 12-14th December 2023. 

20) Parag P. Mangave, Nilesh D. Pawar, Ranjit S Patil, Vishal V. Patil and Paramvir Singh, "A Comparative Study of the Performance and Emissions of SI engine Fuelled with Isopropyl Acetate, n-butyl Acetate, and Premium Gasoline", 9th International Conference on Advances in Energy Research (ICAER) at IIT Bombay from 12-14th December 2023. 

19) Bhanudas B. Takale, Ranjit S. Patil, "CFD Modelling and Performance Evaluation of a Mixed Mode Forced Convection Solar Tunnel Dryer for Curry and Coriander Leaves", 5th International Conference CONSOLFOOD 2023 Advances in Solar Thermal Food Processing, CIFP SOMESO, A CORUÑA-SPAIN,12-14 July 2023.    
18) Abhilash K Tilak, Ranjit S Patil, "Two-phase numerical simulation of the effect of hybrid nanofluid on the performance of microchannel heat sink",8th International and 47th National Conference on Fluid Mechanics and Fluid Power (FMFP 2020), IIT Guwahati, 9-11th December 2020

17) Rajavamsi Gangipamula, Pritanshu Ranjan, Ranjit S Patil, "Hydraulic Noise Reduction in a Volute Pump Using Source Modification - A Test Data Correlation and Numerical Simulation Approach",8th International and 47th National Conference on Fluid Mechanics and Fluid Power (FMFP 2020), IIT Guwahati, 9-11th December 2020

16) Tilak A.K., Patil R.S.,  "Effect of Chitosan Surfactant Concentration on the Thermal Conductivity and Viscosity of Al2O3 + CNT Hybrid Nanofluid". International Conference on Innovations in Nanomaterials & Nanotechnology (NANOMTECH), November 16-17, 2019Bangkok, Thailand. Paper ID-2050.

15) Samyak Jain and Ranjit S Patil, “Numerical Simulation of Novel Nozzle Intake Manifold”, International Conference on Recent Advances in Fluid and Thermal Sciences (iCRAFT2018). BITS Pilani, Dubai campus, 5-7th December 2018. 

14) Mahesh Dasar, Ranjit S. Patil, “Influence of Circular Fins mounted on the Inner Surface of the Cyclone Separator on  Fluid Dynamic Characteristics”, 23rd International Conference on Fludized Bed Conversion, Seoul, Korea, 13-17th May 2018. 

13) Abhilash K Tilak and Ranjit S Patil, "Comparative Analysis of Thermohydraulic Performance of Rectangular and Hexagonal Cross-Section Microchannel Heat Sink" 7th International and 45th National Conference on Fluid Mechanics and Fluid Power (FMFP),    IIT Bombay, 10-12th December 2018

12) Ranjit S. Patil, PinakeswarMahanta, Vishnu Kumar, “Experimental Investigations on Drying in Rotary Fluidized Bed With Static Geometry”, 23rd National Heat and Mass Transfer Conference and 1st International ISHMT-ASTFE Heat and Mass Transfer Conference IHMTC2015, ISRO Thiruvananthapuram, 17-20thDecember 2015.

     11) Vishal V. Patil, Ranjit S. Patil, G. Karthikeyan, “Effect of Addition of Butanol in Sunflower Oil Methyl Ester Diesel Blend in a Diesel Engine”, 23rd National Heat and Mass Transfer Conference and 1st International ISHMT-ASTFE Heat and Mass Transfer Conference IHMTC2015, ISRO Thiruvananthapuram, 17-20th December 2015.

10)  V. V. Patil, R. S. Patil, “Effects of Partial Addition of Butanol in a Rubber seed Oil Methyl Ester Diesel Blend”, 5th International Conference on Advances in Energy Research (ICAER 2015), IIT Bombay, 15-17thDecember 2015.

9) V. V. Patil, R. S. Patil, G. Karthikeyan, “Experimental Investigations on Rubber Seed Oil Methyl Ester by Varying the Load Conditions and Compression Ratio in a Diesel Engine”, 5th International Conference on Advances in Energy Research (ICAER 2015), IIT Bombay, 15-17th December 2015.

8) R. Jain, M. Dasar, P.A. Kulkarni, R. S. Patil, “Investigation on Fluid Dynamic Characteristics of Square Barrel Wall Fins on Efficiency of A Cyclone Separator”, 5th International Conference on Advances in Energy Research (ICAER 2015),IIT Bombay, 15-17thDecember 2015.

7)  Vishal V. Patil, Ranjit S. Patil, “Influence of Addition of Butanol in Neem Seed Oil Methyl Ester Diesel Blend in A Diesel Engine”, 17th ISME Conference on Advances in Mechanical Engineering, IIT Delhi, 3-4thOctober 2015.

    6) P. A. Kulkarni, K. P. Shete, S. Jogdankar, and R. S. Patil, “Effect of Barrel Wall Fin of the Cyclone Separator on Fluid Dynamic Characteristics”, 5th International and 41st National Conference on Fluid Mechanics and Fluid Power (FMFP 2014), IIT Kanpur, 12-14thDecember 2014.

      5)  K. P. Shete, P. A. Kulkarni, and R. S. Patil, “ Computational Studies on Effects of Novel Geometries of Distributor Plates on Fluid Dynamics Characteristics of Circulating Fluidized Bed Riser”, 5th International and 41st National Conference on Fluid Mechanics and Fluid Power (FMFP 2014), IIT Kanpur, 12-14th December 2014.

4)  Ranjit S. Patil, Manmohan Pandey and PinakeswarMahanta, “Study on Wall-to-Bed Heat Transfer Characteristics in the Upper Splash Region of Cold Circulating Fluidized Bed Risers”, 9th International ISHMT-ASME Heat and Mass Transfer Conference (ISHMT-ASME ), IIT Bombay, 4-6th January 2010.

3) R.S. Patil, M. Pandey and P. Mahanta, “CFD Simulation for Heat Transfer and Hydrodynamics Characteristics of Circulating Fluidized Bed Riser”, 1stInternational Conference on Energy Engineering and Eco- Balance (IC-EEE), MITR Pune, India, 16-18th February, 2009.

2)  R.S. Patil, M. Pandey, P. Mahanta, K.L. Meena, Y.V. Singh, and P. Sharma, “Studies on Bed to Wall Heat Transfer in the Cyclone Separators of Circulating Fluidized Beds”, International Conference on Energy Security and Climate Change: Issues, Strategies and Options (ESCC), AIT and RERIC Bangkok - Thailand, 6-8th August, 2008.

1) R.S. Patil, M. Pandey and P.Mahanta, “Studies on Hydrodynamic Characteristics along the Riser of Circulating Fluidized Bed”, IISC Centenary – International Conference on Advances in Mechanical Engineering (IC-ICAME), IISC Bangalore, 2-4th July, 2008.

 

 

 

National Conferences:(Total 8)

 

8) Barapatre S., Deshpande C., Giri N.,Mewani G., Mishra D., Abhilash K. Tilak, Ranjit S Patil, "Selection of Suitable Mesh for Simulation of a Trapezoidal Microchannel Heat Sink with Different Fluids", 1st Symposium and Workshop for Analytical Youth on Applied Mechanics (SWAYAM 2018), BITS Pilani - K K Birla Goa campus, 4-6th July 2018.

7) Gupta N., Sharma S., Jaiswal S., Ahuja A., Chavan R.,Abhilash K. Tilak,Ranjit S. Patil, "Selection of Suitable Mesh for Simulation of a Rectangular Microchannel Heat Sink with Different Fluids ", 1st Symposium and Workshop for Analytical Youth on Applied Mechanics (SWAYAM 2018), BITS Pilani - K K Birla Goa campus, 4-6th July 2018.

6) Lakshya Agarwal, Meet Modi, Robin Singh Chib, Keval Parikh, Sachin Labishetty, Mahesh Dasar, Ranjit S Patil, "Effect of Inlet Design Parameters of a cyclone separator on a fluid dynamic characteristics", 1st Symposium and Workshop for Analytical Youth on Applied Mechanics (SWAYAM 2018), BITS Pilani - K K Birla Goa campus, 4-6th July 2018.

5) Akshat Pagey, Robin Singh Chib, Lakshya Aagarwal, Ranjit S Patil, "Design and Optimization of single speed two-step reduction gearbox", 1st Symposium and Workshop for Analytical Youth on Applied Mechanics (SWAYAM 2018), BITS Pilani - K K Birla Goa campus, 4-6th July 2018.

4) Robin Singh Chib, S. Siddharth Kumar, M. Kaushik Reddy, Krishna Kamdi, Akash Rajawat, Ranjit S Patil,, "Design and Optimization of Wheel Assembly and Suspension Assembly", 1st Symposium and Workshop for Analytical Youth on Applied Mechanics (SWAYAM 2018), BITS Pilani - K K Birla Goa campus, 4-6th July 2018.

3) Manmohan Pandey, PinakeswarMahanta, Patil Ranjit S. and Gawali Mahesh Vijay, “Development of an Experimental Facility for the Study of Scale Effects in Circulating Fluidized Beds”, National Conference on Recent Advances in Mechanical Engineering (NCRAME), NIT Silchar, 20-21st December, 2008.

2) R. Asthana, R.S.Patil, R.K Patil, “Possibilities of Conventional Fuel Conservation in Indian Cement Industry – A Case Study”, 22nd National Convention of Mechanical Engineers on Energy Technologies – Strategies for Optimal Utilization of Natural Resources, The Institute of Engineers and Centre for Energy, IIT Guwahati, India, pp.29, 9-10th September, 2006.

1) G.N. Sopal, Ranjit S .Patil, “Studies on Geographical Information System”, 1st National Conference on Applications of Computers in Engineering and Communications (INCACEC), Dr. B.A.M. University Aurangabad, India, 24-25th March, 2001.

 

 

Area of Research:

Renewable Energy Resources (solar, wind, biomass), CFD, Coding using Python programming, Mathematica, C, C++, Matlab, MFix an Open-Source Multiphase Flow Solver, Modeling and Simulation using CFD software like Fluent (Finite Volume Approach), Fluidization Engineering and Circulating Fluidized Bed (CFB) Boiler, IC Engines, Hydrodynamic and Heat Transfer Characteristics associated with Nano-fluids used in Micro-tubes, Two Phase Flow, Energy Conservation in Power Generation and Process Industries like Power Plant, and Cement, Paper & Pulp Industries respectively, Fluid Mechanics and Heat transfer associated with Casting.

 

 

Membership: ASME, SAE, IAENG UK.

 

 

Reviewer: (Reviewer for Various Reputed Journals & Conferences; Research Proposal of UGC,  DST,  Post - Doc Proposals of IIT G, Examiner for PhD & MTech Thesis of Reputed Universities; Jury in Industry Sponsored Programs)

 

35) PhD Thesis Examiner at Pune University, Pune, September 2021 and VTU Belgaum Karnataka, May 2023.

 
34) Invited by Department of Science and Technology (DST) Govt of India  as an expert in the field of Heating and Cooling of Buildings, to share valuable inputs on R&D priorities relevant to the Indian context, and the development & demonstration of Industry relevant technologies. In this regard, I have attended the Industry Oriented Stakeholder Workshop in Affordable and Sustainable Heating and Cooling of Buildings held at MNIT Jaipur, on 9th May 2023.
 
33) Invited by UGC on 1st February 2023 as an expert to review the research proposal received under various fellowships/Research Grant Schemes of UGC, February 2023.
 

32) Invited by Research & Development (R&D) Section of IIT Guwahati on 2nd November 2022 to review the applications received for the Institute Post-Doctoral Fellowship IPDF-Both National (N-IPDF) & Foreign (F-IPDF)-Program for the Year 2022-23.

 

31) External Examiner for 2 MTech thesis of MIT World Peace University (MIT-WPU) Pune on 27th August 2022.

 

30) Appointed as a member (external expert) for Research Advisory Committee (RAC) of Nirma University from 20th August 2022.

 

29) Invited as the Subject Expert in the Interview Panel for the Faculty Recruitment  at School of Mechanical Engineering of MIT World Peace University (MIT-WPU) Pune on 27th & 29th January 2022. [Other subject experts were from IIT Bombay].

 

28) Jury for 2 years at the Industry Samurai Award 2020 & 2021 organized by Dynamic Manufacturing India (DMI), 5th December 2020,  17th December 2021, 16th December 2022.

  

27) Subject matter expert and Jury for the Summit REPRISM 2019 organized by Aditya Birla Group, Delhi, 2019.

 

 

REVIEWERS: JOURNAL and CONFERENCE PAPERS

26) Reviewer for Elsevier Journal: Separation and Purification Technology

 

25) Reviewer for MDPI Journal: Water

 

24) Reviewer for Wiley: Journal of Engineering

 

 23) Moderator of Session 3A in the CONSOLFOOD2023 – International Conference Advances in Solar Thermal Food Processing on 12th – 14th July 2023, Spain. 
 

22) Reviewer for Elsevier Journal: International Journal of Heat and Fluid Flow 

 

21) Reviewer for World Scientific Journal: Modern Physics Letters B 

 

20) Reviewer for Elsevier Journal: Journal of Building Engineering

 

19) Reviewer for Elsevier Journal: Computers and Mathematics with Applications

 

18) Reviewer for Tech Science Press Journal: Sound and Vibration

 

 17) Reviewer for Elsevier Journal: Process Safety and Environmental Protection

 

16) Reviewer for Bentham Science Publisher Journal: Recent Patents on Engineering 

 

15) Reviewer for SAGE Journal: Journal of Low Frequency Noise, Vibration & Active Control 

 

14) Reviewer for Hindawi Journal: Advances in Materials Science and Engineering 

 

13) Reviewer for American Institute of Physics Journal: Physics of Fluids 

 

12) Reviewer for Elsevier Journal : Journal of Environmental Chemical Engineering  

 

11) Reviewer for Elsevier Journal : Powder Technology 

 

10) Reviewer for Elsevier Journal : Chemical Engineering Research and Design 

 

9) Reviewer for IMechE Journal : Mechanical Engineering Science Part C 

 

8) Reviewer for Elsevier Journal: Energy    

 

7) Reviewer for Wiley Journal: Environmental Progress and Sustainable Energy 

 

6) Reviewer for Taylor & Francis Journal : Engineering Applications of Computational Fluid Mechanics 

 

5) Reviewer for SAGE Journal : Advances in Mechanical Engineering 

 

4) Reviewer for AIChE Journal 

 

3) Reviewer for Mc GrawHill Publication Book: Thermal Engineering.  

 

2) Session Co-chair  for the "Applications of Commercial Software" at the ASME 2016 Power and Energy Conference held at North Carolina, USA. 

 

1) Reviewer at Conferences: Held at IITs such as IIT Bombay,  5th International and 41st National Conference on “Fluid Machines and Fluid Power (FMFP 2014)” at IIT Kanpur, FMFP 2022 at IIT Roorkee, FMFP 2023.

 

 

 

 

 

ADMINISTRATION

 27)  Head - Department of Mechanical Engineering from 21st November 2017 to 17th May 2022.

  

26) Working as Faculty Co-ordinator for WAVES November 2023.
 

25) Working as a Member of Energy group in “Energy Environment and Green Audit” committee formed for K K Birla Goa campus for a period of 2 years since 17th June 2023.

 

24) Working as a Member for Project Lakshya since 12 October 2018 in the "Research as a Thrust Area". 

 

23) Chairman - Doctoral Research Committee (DRC) and Department's Committee on Academics (DCA) from 21st November 2017 to 17th May 2022

.       [Started ME Mechanical Engineering and co-ordinated to update thermal engineering related courses and overall co-ordinator (Goa campus) while updating BE Mechanical Engineering Curriculum.]

 

22) Involved as Panel Member for the Faculty and Staff Recruitment for the Department, Workshop and Maintenance unit etc. 

 

21)  Faculty-in charge of Central Workshop Unit from 21st November 2017 to 17th May 2022.

 

20) Worked as Warden - AH-6 Hostel at BITS Pilani K K Birla Goa Campus for 4 years since 1st January 2014.

 

19) Worked as Convener of Doctoral Research Committee (DRC) of Department of Mechanical Engineering for 2 years since 1st January 2016.

 

18) Worked as a one of the Team members for Energy Conservation of  BITS Pilani K K Birla Goa Campus and for AC Plant with other team members. 

 Also started working as member of EEGA (Energy, Environment, and Green Audit Assessment)  for the NAAC Accreditation from 17th June 2023.
 

17) Worked as Faculty Coordinator - Placement division for the students of Department of Mechanical Engineering.

 

16) Working as SAE Faculty Coordinator for SAE BITS Pilani K K Birla Goa Campus since January 2013 to till date. (BAJA, SUPRA, SAE AERO teams under this club are working excellent and till date students have presented five in-house fabricated Cars / design for flying objects at different competitions held in India).

 

15) Worked as Member of Academic Counseling Board (ACB)  for 2 years since July 2014 to July 2016.

 

14) Worked as a Member representing K K Birla Goa Campus for Institutional Knowledge and Analysis (IKA) Cell.

 

13) Worked as PS-I Instructor (online mode) at Birla Polyfibers Harihar and Birla White Cements Jodhpur in May- July 2022.       

 Worked as PS-I instructor (ONSITE Mode) for Goa Shipyard Ltd, Goa, Mormugao Port Trust Ltd., Goa, Pentair Water India Pvt Ltd Goa, Putzmeister Goa, Carscan (ONLINE mode) Pune May- July 2023.

Also took initiative in Summer 2023 to start PS-II station at L&T Mindree group.       

12) Worked as Faculty Coordinator for BITSAT 2022 (Session-II, Centre: KIT Kolhapur).

 

11) Arranged a Workshop on “Development of Electric Vehicle, Software, Architecture and Control” alongwith EEE department on 8th September 2022.

 

10) Goa Legislative assembly election duty as Presiding officer on 3rd and 4th February 2017.

 

9) Worked as Moderator for Questions on Thermal engineering related courses for Higher Degree Admission Test 2017 of BITS –Pilani.

 

8) Worked as Expert related with Thermal Engineering Subjects for UPSC EXAMINATION, UPSC Delhi, India.

 

 7) Worked under PS Duty for Mission - Enhancing Students PS-I Experience to Power Stations. I have worked in May-July  2017 for PS-I to monitor Power Plants (Adani Power Mundra, Adani Power Tiroda, Adani Power Ahmedabad, Essar Power Jamnagar, Essar Power Hazira, Hindalc, Nalco).  Visited Essar Power Jamnagar and Adani Power Tiroda as an expert from Mechanical Engineering Department for technical guidance to students in their PS-I projects.

 

6) Worked on Energy Conservation and Co-generation in Sugar Factories under Industry Immersion Program of BITS Pilani, May-July 2015.

 

5) Worked as PS-I Instructor at  Pune in May- July 2013 for TATA Technologies, Thermax, and Kirloskar Pneumatics.

 

4) Worked as PS-I Instructor at  Kolhapur in May- July 2012 for Caspro, and Kirloskar Oil Engines.

 

3) Arranged two days Workshop  on  "Electronics System in IC Engines" conducted by Medhavi Centre for Automotive Research.

 

2) Arranged National Level Conference - "1st Symposium and Workshop for Analytical Youth on Applied Mechanics", 4-6 July 2018. Conference was jointly arranged by BITS Pilani - K K Birla Goa campus and Indian Society of Applied Mechanics.

 

1) Arranged several Invited Talks where resource person were from DRDO, IITs (Bombay, Kanpur etc) and other abroad universities, ARAI Pune, industries such as (Siemens, GE etc), talk by Guinness Book Record Holder for "Longest Journey in Electric Car": Mr. Sushil Reddy (October 2023).


Publications

Journal Publications

  • Gautam and S. Mohan, “STATE: Distributed Algorithm for Uniform Circle Formation by Multiple Mobile Robots”, Journal of Intelligent Service Robotics (Springer), vol. 9, no. 4, pp. 347-366. 2016. 
  • A. Gautam, B. Jha, G. Kumar, J. Murthy, S. Ram and S. Mohan, “FAST: Synchronous Frontier Allocation for Scalable Online Multi-Robot Terrain Coverage”, Journal of Intelligent Robotic Systems (Springer), 2016. 
  • Digalwar, M., Gahukar, P., Raveendran, B. K. & Mohan, S. (2014). Energy efficient real-time scheduling algorithm for mixed task set on multi-core processors. International Journal of Embedded Systems. 

Papers Published In International Conferences Held Abroad

  • A. Gautam, J. K. Murthy, G. Kumar, S. P. A. Ram, B. Jha and S. Mohan, "Cluster, Allocate, Cover: An Efficient Approach for Multi-Robot Coverage," In Proceedings of 2015 IEEE International Conference on Systems, Man, and Cybernetics (SMC), Kowloon, 2015, pp. 197-203. Location: City University, Hong Kong, China. 
  • Digalwar, M., Gahukar, P., Mohan, S. & Raveendran, B. K. (2015). STREAM: A Simulation Tool for Energy Efficient Real Time Scheduling and Analysis. Proceedings of International Workshop on Analysis Tools and Methodologies for Embedded and Real-time Systems (WATERS) in conjunction with 27th Euromicro Conference on Real Time Systems (ECRTS), Lund, Sweden. July 2015. 
  • Digalwar, M., Mohan, S., & Raveendran, B. (2013). Dynamic voltage and frequency scaling scheduling algorithm for mixed task set. Proceedings of 8th IEEE International Conference on Industrial and Information Systems (ICIIS 2013), University of  Peradeniya, Kandy, SriLanka, December 2013, pp. 643-648. 

Papers Published In International Conferences Held In India

  • A. Gautam and S. Mohan, "A review of research in multi-robot systems," 2012 IEEE 7th International Conference on Industrial and Information Systems (ICIIS), Chennai, 2012, pp. 1-5. DOI: 10.1109/ICIInfS.2012.6304778. Location: IIT Madras, Chennai, India. 
  • A. Gautam, S. Mohan and J. P. Misra, "A practical framework for uniform circle formation by multiple mobile robots," 2012 IEEE 7th International Conference on Industrial and Information Systems (ICIIS), Chennai, 2012, pp. 1-5. DOI: 10.1109/iciinfs.2012.6304765. Location: IIT Madras, Chennai, India. 
  • A. Gautam, S. Mohan and V. S. Shekhawat, "A token passing approach for circle formation by multiple mobile robots," Contemporary Computing (IC3), 2013 Sixth International Conference on, Noida, 2013, pp. 522-527. DOI: 10.1109/ic3.2013.6612251. Location: JIIT University, Noida, India. 
  • A. Gautam and S. Mohan, "A distributed algorithm for circle formation by multiple mobile robots," In Proceedings of International Conference on Control, Automation, Robotics and Embedded Systems (CARE), Jabalpur, 2013, pp. 1-5. Location: IIITDM, Jabalpur, India. 
  • Digalwar, M., Mohan, S., & Raveendran, B. (2013). Energy Aware Real Time Scheduling Algorithm for Mixed Task Set. Proceedings of IEEE International Conference on Advanced Electronic Systems (ICAES 2013), pp. 325-327.
  • Digalwar, M., Gahukar, P., & Mohan, S. (2014). Design and development of a real time scheduling algorithm for mixed task set on multi-core processors. Proceedings of 7th IEEE International Conference on Contemporary Computing (IC3 2014), pp. 265-269. 

Journals

Total No. of publications: 57

R.J. Barla, Smita Raghuvanshi, Suresh Gupta. Sustainable synergistic approach to chemolithotrophs-supported bioremediation of wastewater and flue gas. Scientific Reports, Vol. 14, pp. 16529, 2024.

R.J. Barla, Smita Raghuvanshi, Suresh Gupta. A comprehensive review of flue gas bio-mitigation: chemolithotrophic interactions with flue gas in bio-reactors as a sustainable possibility for technological advancements. Environmental Science and Pollution Research, Vol. 31, pp. 33165–33189, 2024.

Shailee Gaur, Jujaru Mohan, Vennu Revanth, Suresh Gupta, Amit Jain. Valorization of waste engine oil to mono- and di-rhamnolipid in a sustainable approach to circular bioeconomy. Biodegradation, Vol. 35, pp. 803–818, 2024.

R.J. Barla, Smita Raghuvanshi, Suresh Gupta. Reforming CO2 bio-mitigation utilizing Bacillus cereus from hypersaline realms in pilot-scale bubble column bioreactor. Scientific Reports, Vol. 14, pp. 6354, 2024.

Anil Kumar K, Yeshwanth M., Jitendra Panwar, Suresh Gupta. Remediation of multifarious metal ions and molecular docking assessment for pathogenic microbe disinfection in aqueous solution by waste-derived Ca-MOF. Environmental Science and Pollution Research, Vol. 31, pp.21545-21567, 2024.

Anil Kumar K, M. Jujaru, Jitendra Panwar, Suresh Gupta. Non-derivatizing solvent assisted waste-derived cellulose/ mof composite porous matrix for efficient metal ions removal: Comprehensive analysis of batch and continuous packed-bed column sorption studies. RSC Advances, Vol. 14, pp. 20254-20277, 2024.

Anil Kumar K, Arpit Bisoi, M. Yeshwanth, Shobham, M. Jujaru, Jitendra Panwar, Suresh Gupta. Unveiling dye adsorption capability of Moringa oleifera functionalized hybrid porous MOF-GO composites: In vitro and in silico ecotoxicity assessment via antibacterial and molecular docking studies. Environmental Science: Water Research & Technology, 2024. DOI: https://doi.org/ 10.1039/d4ew00185k

Vishalakshi Bhanot, Mamta, Suresh Gupta, Jitendra Panwar. Phylloplane fungus Curvularia dactyloctenicola VJP08 effectively degrades commercially available PS product, Journal of Environmental Management, Vol. 351, 119920, 2024.

Shailee Gaur, Suresh Gupta, Prabhat N. Jha, and Amit Jain. Rhamnolipid production by Pseudomonas aeruginosa (SSL-4) on waste engine oil (WEO): Taguchi optimization, soil remediation, and phytotoxicity investigation. Environmental Technology, pp. 1-14, 2023.

Shailee Gaur, Suresh Gupta, Amit Jain. Production, characterization, and kinetic modeling of biosurfactant synthesis by Pseudomonas aeruginosa gi |KP 163922|: a mechanism perspective. World Journal of Microbiology and Biotechnology, Vol. 39, pp. 178, 2023.

Abhishek Anand,  Smita Raghuvanshi, Suresh Gupta. Sustainable approach for simultaneously reducing CO2 and NO emissions from synthetic industrial flue gases using bacterial consortium and domestic wastewater in a suspended glass bioreactor. Biomass Conversion and Biorefinery, 2023, 1-16.

Shailee Gaur, Aditya Sahani, Pradipta Chattopadhyay, Suresh Gupta, Amit Jain. Remediation of Waste Engine Oil Contaminated Soil using Rhamnolipid based Detergent Formulation. Materials Today: Proceedings, Vol. 77, pp. 31-38, 2023.

Anil Kumar K, Shobham, Jitendra Panwar, Suresh Gupta, One-pot synthesis of metal oxide-clay composite for the evaluation of dye removal studies: Taguchi optimization of parameters and environmental toxicity studies. Environmental Science and Pollution Research, 2022, https://doi.org/10.1007/s11356-022-23752-9

Anil Kumar K, M. Yeshwanth, B. K. Kumar, Jitendra Panwar, Suresh Gupta, Functionalized Cu-based metal oxide nanoparticles with enhanced Cd+2 adsorption capacity and their ecotoxicity assessment by molecular docking. Journal of Environmental Management, Vol. 307, pp. 114523, 2022.

Akshya Khandelwal, Abhishek Anand, Smita Raghuvanshi, Suresh Gupta, Integrated approach for microbial carbon dioxide (CO2) fixation process and wastewater treatment for the production of hydrocarbons: Experimental studies,  Journal of Environmental Chemical Engineering, Vol. 9, pp. 105-116, 2021.

Abhishek Anand,  Kaustubh Tripathi, Amit Kumar,  Suresh Gupta, Smita Raghuvanshi, Sanjay Kumar Verma, Bio-Mitigation of Carbon Dioxide Using Desmodesmus sp. in the Custom-Designed Pilot-Scale Loop Photobioreactor, Sustainability, Vol. 13, pp. 9882, 2021.

Shailee Gaur, Suresh Gupta, Amit Jain, Characterization and oil recovery application of biosurfactant produced during bioremediation of waste engine oil by strain Pseudomonas aeruginosa gi|KP 16392| isolated from Sambhar salt lake, Bioremediation Journal, Vol. 25, pp. 308-225, 2021.

Abhishek Anand, Smita Raghuvanshi, Suresh Gupta, Trends in Carbon Dioxide (CO2) Fixation by Microbial Cultivations. Current Sustainable/Renewable Energy Reports, Vol. 7, pp. 40–47, 2020. https://doi.org/10.1007/s40518-020-00149-1

B.G. Prakash Kumar, Rusal Raj Francis, Aisha Raouf, Ramachandran Subramanian, Suresh Gupta, Geetha Kannan, K. Thirumavalavan, Torrefied materials derived from waste vegetable biomass, Materials Today: Proceedings, 2020, https://doi.org/10.1016/j.matpr.2019.12.311

S.K. Pradhan, V. Pareek, J. Panwar, and Suresh Gupta, Synthesis and characterization of ecofriendly silver nanoparticles combined with yttrium oxide (Ag-Y2O3) nanocomposite with assorted adsorption capacity for Cu(II) and Cr(VI) removal: A mechanism perspective. Journal of Water Process Engineering, Vol. 32, pp. 100917, 2019.

Somesh Mishra, Smita Raghuvanshi, Suresh Gupta, Carbon dioxide to bio-fuels by mixed and pure microbial cultures isolated from activated sludge: relative evaluation of CO2 fixation, biodiesel production, and thermodynamic analysis, Green House Gases: Science and Technology, Vol. 9, pp. 1135-1157, 2019.

Somesh Mishra, Silabrata Pahari, Shiva, K, Suvrasoumya Mohanty, Suresh Gupta, Smita Raghuvanshi, Investigation on CO2 bio-mitigation using Halomonas stevensii in laboratory scale bioreactor: Design of downstream process and its economic feasibility analysis. Journal of CO2 Utilization, Vol. 24, PP. 274 – 286, 2018.

Somesh Mishra, Piyush Chauhan, Suresh Gupta, Smita Raghuvanshi, Rajnish P. Singh, Prabhat N. Jha, CO2 sequestration potential of halo-tolerant bacterium Pseudomonas aeruginosa SSL-4 and its application for recovery of fatty alcohols. Process Safety and Environment Protection, Vol. 111, pp. 582-591, 2017.

Saswat Kumar Pradhan, Jitendra Panwar , Suresh Gupta, Enhanced heavy metal removal using silver-yttrium oxide nanocomposites as novel adsorbent system. Journal of Environmental Chemical Engineering, Vol. 5, pp. 5801 – 5814, 2017.

Somesh Mishra, Smita Raghuvanshi, Suresh Gupta, Kausik Raj, Application of novel thermo-tolerant haloalkalophilic bacterium Halomonas stevensii for bio mitigation of gaseous phase CO2: Energy assessment and product evaluation studies, Process Biochemistry, Vol. 55, pp. 133 – 145, 2017.

Subhajit Majumder, Smita Raghuvanshi, Suresh Gupta, Sequestration of Zn2+ from aqueous solution using Klebsiella pneumoniae: Batch kinetics and continuous studies, Journal of Water Process Engineering, Vol. 12, pp. 89–104, 2016.

Somesh Mishra, Suresh Gupta, Smita Raghuvanshi, Pratibha Pal, Energetic assessment of fixation of CO2 and subsequent biofuel production using B. cereus SM1 isolated from sewage treatment plant, Bioprocess and Biosystems Engineering. Vol. 39, pp. 1247–1258, 2016.

Subhajit Majumder, Smita Raghuvanshi, Suresh Gupta, Application of a hybrid biofilter column for the removal of Cr(VI) from aqueous solution using an indigenous bacterial strain Pseudomonas taiwanensis, Bioremediation Journal, Vol. 20, pp. 10-23, 2016.

Subhajit Majumder, Vedansh Gupta, Smita Raghuvanshi, Suresh Gupta, "Simultaneous sequestration of ternary metal ions (Cr6+, Cu2+ and Zn2+) from aqueous solution by an indigenous bacterial consortium, Process Safety and Environmental Protection, Vol. 102, pp. 786-798, 2016.

Utkarsh Maheshwari, Suresh Gupta, Performance evaluation of activated neem bark for the removal of Zn(II) and Cu(II) along with other metal ions from aqueous solution and synthetic pulp & paper industry effluent using fixed-bed reactor, Process Safety and Environmental Protection, Vol. 102, pp. 547–557, 2016.

Utkarsh Maheshwari, M. Bhuvanesh, Suresh Gupta, Efficient Adsorbent for simultaneous removal of Cu(II), Zn(II) and Cr(VI): Kinetic, Thermodynamics and Mass Transfer Mechanism. Process Safety and Environmental Protection, Vol. 98, pp. 198-210, 2015.

Somesh Mishra, Rajnish P singh, Smita Raghuvanshi, Suresh Gupta, Deducing the Bio-Perspective Capabilities of Fe(II) Oxidizing Bacterium Isolated from Extreme Environment. Biochemistry & Analytical Biochemistry, Vol. 4, pp. 1-5. Published online (DOI: 10.4172/2161-1009.1000166)

M.K. Gupta, R.K. Srivastava, Sushil Kumar, Suresh Gupta, B. Nahak. Mechanical and Water Absorption Properties of Hybrid Sisal/Glass Fibre Reinforced Epoxy Composite. American Journal of Polymer Science & Engineering, Vol. 3, pp. 208 – 219, 2015.

Subhajit Majumder, Gayathri Gangadhar, Smita Raghuvanshi, Suresh Gupta, A comprehensive study on the behavior of a novel bacterial strain Acinetobacter guillouiae for bioremediation of divalent copper, Bioprocess and Biosystems Engineering, Vol. 38,  pp. 1749-1760, 2015.

Subhajit Majumder, Gayathri Gangadhar, Smita Raghuvanshi, Suresh Gupta, Biofilter column for removal of divalent copper from aqueous solutions: performance evaluation and kinetic modeling, Journal of Water Process Engineering, Vol. 6, pp. 136-143, 2015. 

Utkarsh Maheshwari, Suresh Gupta, Removal of Cr(VI) from Wastewater using Activated Neem Bark in a Fixed-bed Column: Interfernce of Other Ions and Kinetic Modelling Studies. Desalination and Water Treatment, Vol. 57, pp. 8514-8525, 2016.

Utkarsh Maheshwari, Suresh Gupta, Removal of Cr(VI) from Wastewater Using a Natural Nanoporous Adsorbent: Experimental, Kinetic and Optimization Studies. Adsorption Science & Technology, Vol. 33, 71-88, 2015.

Utkarsh Maheshwari, Suresh Gupta, A novel method to identify optimized parametric values for adsorption of heavy metals from waste water. Journal of Water Process Engineering, Vol. 9, pp. e21–e26, 2016. 

Rompicherla J. Bhargavi, Utkarsh Maheshwari, Suresh Gupta, Synthesis and use of alumina nanoparticles as an adsorbent for the removal of Zn(II) and CBG dye from wastewater. International Journal of Industrial Chemistry, Vol. 6, pp. 31 – 41, 2015.

Saee Vyawahare, Saswat Kumar Pradhan, Suresh Gupta, Removal of Heavy Metal Ions from Industrial Waste Water Using Metallic Nanoparticles as Adsorbents. Advanced Science Letters, Vol. 20, pp. 1311-1315, 2014.

Subhajit Majumder, Smita Raghuvanshi, Suresh Gupta, Estimation of Kinetic Parameters for Bioremediation of Cr(VI) from Wastewater using Pseudomonas taiwanensis an isolated strain from Enriched Mixed Culture. Bioremediation, Vol. 18, pp. 236–247, 2014.

Bhupendra K. Sharma, Abhishek Mishra, Suresh Gupta,  Heat and mass transfer in magneto bio-fluid flow through a non-Darcian porous medium with Joule effect. Journal of Engineering Physics and Thermophysics, Vol. 86 (4), pp. 717 – 725, 2013.

Smita Raghuvanshi, Suresh Gupta, B. V. Babu, Growth Kinetics of Acclimated Mixed Culture for Degradation of Iso-Propyl Alcohol (IPA), Journal of Biotechnology & Biomaterials, Published online, S13:002. DOI: 10.4172/2155-952X.S13-002.

Bhupendra K. Sharma, Suresh Gupta, V. Vamsi Krishna, R. J. Bhargavi, Soret And Dufour effects on an unsteady MHD mixed convective flow past an infinite vertical plate with Ohmic dissipation and heat source. Afrika Matematika, Vol. 25, pp. 799 – 821, 2014. Published online April, 2013. DOI 10.1007/s13370-013-0154-6.

Gayathri Gangadhar, Utkarsh Maheshwari, Suresh Gupta, Application of Nanomaterials for the removal of pollutants from effluent streams. Nanoscience & Nanotechnology – Asia, Vol. 2 (No. 2), pp. 140 – 150, 2012.

Amita Ummadisingu, Suresh Gupta, Characteristics and kinetic study of chitosan prepared from seafood industry waste for oil spills clean-up. Desalination and Water Treatment, 44 (No. 1 – 3), pp. 44 – 51, 2012.

D. Aditya, Rohan Parmar, Suresh Gupta, Nano-adsorbents for wastewater treatment: a review. Research Journal of Chemistry and Environment, Vol. 15 (No. 2), pp. 1033-1040, 2011.

Subhajit Majumder, Smita Raghuvanshi, Suresh Gupta, Biodegradation kinetics of Cr (VI) by acclimated mixed culture. Research Journal of Chemistry and Environment, Vol. 15 (No. 2), pp. 181 – 184, 2011.

Utkarsh Maheshwari, Suresh Gupta, Kinetic and equilibrium studies of Cr (VI) removal from aqueous solutions using activated neem bark. Research Journal of Chemistry and Environment, Vol. 15 (No. 2), pp. 939 – 943, 2011.

Dipaloy Datta, Suresh Gupta, Modeling and simulation of isothermal fixed-bed adsorption column: comparison of pore and solid diffusion mass transfer. International Journal of Chemical Modeling, Vol. 3 (No. 3) 2011.

Suresh Gupta, B. V. Babu, Experimental-, kinetic-, equilibrium- and regeneration studies for adsorption of Cr(VI) from aqueous solutions using low-cost adsorbent (activated flyash). Desalination and Water Treatment, Vol. 20 (1-3), pp. 168-178, 2010.

Suresh Gupta, B. V. Babu, Experimental and modeling aspects in column studies for removal of Cr(VI) using activated tamarind seeds. Journal of Water Resource and Protection, Vol. 2 (No. 8), pp. 706-715, 2010.

Suresh Gupta, B. V. Babu, Modeling, simulation, and experimental studies for continuous Cr(VI) removal from aqueous solutions using sawdust as an adsorbent. Bioresource Technology, Vol. 100 (No. 23), pp. 5633-5640, 2009.

Suresh Gupta, B. V. Babu, Utilization of waste product (tamarind seeds) for the removal of Cr(VI) from wastewater: equilibrium, kinetics, and regeneration studies. Journal of Environmental Management, Vol. 90 (No. 10), pp. 3013-3022, 2009.

Suresh Gupta, B. V. Babu, Removal of toxic metal Cr(VI) from aqueous solutions using sawdust as adsorbent: equilibrium, kinetics and regeneration studies. Chemical Engineering Journal, Vol. 150 (No. 2-3), pp. 352-365, 2009.

B. V. Babu, Suresh Gupta, Removal of Cr(VI) from wastewater using activated tamarind seeds as an adsorbent. Journal of Environmental Engineering and Science, Vol. 7 (No. 5), pp. 553-557, 2008.

B. V. Babu, Suresh Gupta, Adsorption of Cr(VI) using activated neem leaves as an adsorbent: kinetic studies. Adsorption, Vol. 14 (No. 1), pp. 85-92, 2008.

B. V. Babu, Suresh Gupta, Modeling and simulation of fixed-bed adsorption column: effect of velocity variation. Journal on Engineering & Technology, Vol.1 (No.1), pp 60-66, 2005.


Conference Proceedings

Total no. of conference proceedings: 76

Shobham, Mamta, Vishalakshi Bhanot, Suresh Gupta, and Jitendra Panwar. Mycoremediation of dyes contaminated wastewater. 63rd Annual Conference of Association of Microbiologists of India (AMI) (Microbio Tech-2023), February 02-04, 2023, M.D. University, Rohtak, Haryana, p. 278.

Shobham, Mamta, Vishalakshi Bhanot, Suresh Gupta, and Jitendra Panwar.  Mycoremediation of Zn+2 from wastewater. 2nd International Conference on Water Technologies 2022 (ICWT 2022), December 01-02, 2022, IIT, Bombay.

Anil Kumar K, Arpit Bisoi, Jitendra Panwar, and Suresh Gupta. Cost-effective Synthesis of GO-MOF Composites for the Removal of Dyes from Wastewater: A Taguchi Optimization of Factors. 2nd International Conference on Water Technologies 2022 (ICWT 2022), December 01-02, 2022, IIT, Bombay.

1.       Anil Kumar K, Jitendra Panwar, Suresh Gupta, Shobham. One-pot synthesis of metal oxide-clay composite for the evaluation of dye removal studies: Taguchi optimization of parameters and antibacterial studies. International Conference on Technological Interventions for Sustainability (CHEM-CONFLUX 22), April 14-16, 2022, Motilal Nehru National Institute of Technology Allahabad, Prayagraj, p. 67-68.

Rachael J Barla, Smita Raghuvanshi, Suresh Gupta, Analysis on Bio-Mitigation of Flue CO2 by Chemolithotrophs in a Continuous Pilot-Scale Bubble Column Reactor, International Conference on Technological Interventions for Sustainability (CHEM-CONFLUX 22), April 14-16, 2022, Motilal Nehru National Institute of Technology Allahabad, Prayagraj, p. 235-236.

Suresh Gupta, Tanay Anand, Kirti Vardhan Jaitawat, Astitva Kumar Gupta, Pollution Control via Mass Integration in Petroleum Refining Industry, International Conference on Technological Interventions for Sustainability (CHEM-CONFLUX 22), April 14-16, 2022, Motilal Nehru National Institute of Technology Allahabad, Prayagraj, p. 281-282.

Abhishek Anand, Smita Raghuvanshi, Suresh Gupta, Simultaneous Removal of Carbon Dioxide and Nitric Oxide Utilizing a Mixed Bacterial Consortium in a Glass Bioreactor: Evaluation of Removal Efficiency, Characterization of Microbial Communities, and Value-Added Products, International Conference on Technological Interventions for Sustainability (CHEM-CONFLUX 22), April 14-16, 2022, Motilal Nehru National Institute of Technology Allahabad, Prayagraj, p. 237-238.

Shailee Gaur, Vennu Revanth, Suresh Gupta and Amit Jain, Bioconversion of Low-Cost Waste Engine Oil to A Mixture of Mono- and Di-Rhamnolipid: An Improvement of Submerged Fermentation by Parameter Optimization, International Conference on Technological Interventions for Sustainability (CHEM-CONFLUX 22), April 14-16, 2022, Motilal Nehru National Institute of Technology Allahabad, Prayagraj, p. 405-406.

Santosh Khandgave, Ankit Kothavade, Suresh Gupta, Utkarsh Maheshwari, Scope of Utilization of Mix-Bed Adsorbent for Effective Multi-Pollutant Removal, Proceedings of International Conference on Advances in Chemical Science and Petrochemical Engineering (ACAPE-2020) organized by Department of Chemical Engineering & Department of Petroleum Studies, Zakir Hussain College of Engineering and Technology, Aligarh Muslim University, February 22-24, 2020.

Anil Kumar K, Kusum Kumar B, Suresh Gupta, Jitendra Panwar, Synthesis of CuO (I&II) Nanoparticles by Mixed Oxidation State Cu precursors and its Application for the Removal of Heavy Metal Ions from an Industrial Wastewater, Proceeding of CHEM-CONFLUX20, an International Conference on Energy and Environmental Technologies for Sustainable Development held at MNNIT Allahabad during February 14-16, 2020.

Abhishek Anand, Smita Raghuvanshi, Suresh Gupta, “A Sustainable Approach Towards Non photosynthetic Conversion of Carbon di oxide to Bio-diesel utilizing mixed microbial cultures – Steps towards climate change”, Proceedings of Engineering Sustainable Development Conference ESD-2019, organised by AIChE Institute of Sustainability, held at Korea University, December 12-13, 2019.

Utkarsh Maheshwari, Raju Kale, Rohit Deve, and Suresh Gutpa, "Gaps in the conventional adsorption process for industrial wastewater treatment", Proceedings of "New Frontiers in Chemical Engineering:, organized by Department of Chemical Engineering, Pravara Rural Engineering College, Loni, Dist. Ahmednagar (MS) , March 14-16, 2018.

Rajat Doshi, Rajib Mukherjee, Urmila M. Diwekar, Suresh Gupta, Arti A. Rajput, Application of Adsorbate Solid Solution Theory to Design Novel Adsorbents for Arsenic Removal Using Computer-Aided Molecular Design, presented in 18 AICHE Annual Meeting on the theme of AICHE + Chemical Engineering: Today, Tommorow and Leading the Future, Pittsburgh, PA, October 28 - Novermber 02, 2018.

S. K. Pradhan, N. S. Mangesh, J. Panwar, Suresh Gupta, 2018. Synthesis of cobalt oxide nanoparticles for the removal of Cu(II) from aqueous solution, Paper presented in 23rd International Congress of Chemical and Process Engineering (CHISA 2018), Prague, Czeck republic, August 25-30, 2018.

Somesh Mishra, Smita Raghuvanshi, Suresh Gupta, “Gaseous phase CO2 bio-mitigation using mixed microbial population in an indigenously developed packed bed bioreactor”, Proceedings of 23rd International Congress of Chemical and Process Engineering (CHISA 2018) Prague, Czeck republic, August 25-30, 2018.

Smita Raghuvanshi, Somesh Mishra, Suresh Gupta, "Gas chromatography-mass spectrometry analysis of products obtained from CO2 mitigation using bacterial species", held at International Conference on Molecular Spectroscopy (ICMS 2017) from 8-10 December 2017 at Mahatma Gandhi University, Kottayam, Kerala, India.

S K Verma, Suresh Gupta, Anupam Singhal and S Ramachandran, “Zn recovery from electroplating sludge using stirred tank bioreactor” in 2017 AIChE Annual Meeting, Minneapolis, MN, October 29 - November 3, 2017.

Sumit Dhage, Suresh Gupta and Amit Jain, "Experimental and growth kinetics studies of bacterium isolated from waste automobile engine oil contaminated soil" Proceedings of International Conference on Waste Water Management (ICWW-2017), August 17-19, 2017, Coimbatore, India.

Sumit Dhage, Suresh Gupta and Amit Jain, "Bioremediation of Waste Engine Oil by Bacteria Isolated from Engine-oil Contamined Soil", Proceedings of  6th National Conference On Chemical & Environmental Sciences (NCCES -2017), Under aegis of The Indian Science Congress Association (Kurukshetra Chapter) April 01, 2017, Panipat, India.

Suresh Gupta, Sakshi Batra, Sushil Kumar, “Treatment Of Wastewater Contaminated Methylene Blue Dye And Reactive Orange-16 Using Bioremediation”, Proceeding of 69th Annual Session of IIChE (CHEMCON-2016), jointly organized by Indian Institute of Chemical Engineers, Chennai Regional Centre in association with A.C. Tech Anna University, Chennai, 27-30 December 2016.

Somesh Mishra, Suresh Gupta, Smita Raghuvanshi, Siva Krishna, “Mitigation of CO2 using isolated species from Sewage Treatment Plant: A biobased approach”, 3rd International Conference on Chemical, Biological, and Environmental Sciences (ICCBES'15). Proceedings of IAAST, held on Dec 31-2015 to Jan-1, 2016 at Bangkok, Thailand.

Suresh Gupta, Nadkarni Shradha Mangesh, Arpit Bhutani, and Riddhi Jain, Cobalt Oxide Nanoparticles for the Removal Of Cu (II) from Aqueous Solution, 3rd International Conference on Chemical, Biological, and Environmental Sciences (ICCBES'15). Proceedings of IAAST, held on Dec 31-2015 to Jan-1, 2016 at Bangkok, Thailand.

Utkarsh Maheshwari and Suresh Gupta,  Activated Neem Bark as a Potential Low-Cost adsorbent for the Removal of Cr(VI), Cu(II) and Zn(II) from Wastewater, International Conference on Biotechnology, Nanotechnology and Environmental Engineering (ICBNE’15), organized by International Academy of Arts, Science & Technology (IAAST) at Bangkok (Thailand), April 22-23, 2015.

Utkarsh Maheshwari, Kuldeep Kuhar and Suresh Gupta, Equilibrium studies for the removal of cr(vi), cu(vi) and zn(ii) Using activated neem bark, Proceeding of 67th Annual Session of IIChE (CHEMCON-2014) and Indo-Japanese Symposium, jointly organized by Chandigarh Regional Center, IIChE and Dr, SSB University Institute of Chemical Engineering & Technology, Chandigarh, December 27-30, 2014.

Subhajit Majumder, Gayathri Gangadhar, Smita Raghuvanshi, Suresh Gupta, Optimization Of Divalent Copper Bioremediation By Acinetobacter Guillouiae Using Response Surface Methodology, Proceeding of 67th Annual Session of IIChE (CHEMCON-2014) and Indo-Japanese Symposium, jointly organized by Chandigarh Regional Center, IIChE and Dr, SSB University Institute of Chemical Engineering & Technology, Chandigarh, December 27-30, 2014.

Sakshi Batra, Suresh Gupta, Experimentaland theoretical studies for removal of dyes from industrial wastewater using bioremediation, Proceeding of 67th Annual Session of IIChE (CHEMCON-2014) and Indo-Japanese Symposium, jointly organized by Chandigarh Regional Center, IIChE and Dr, SSB University Institute of Chemical Engineering & Technology, Chandigarh, December, 27-30 2014.

KalyaneeAmbatkar, Suresh Gupta, SubhajitMajumder, Experimental study for the removal of hexavalent chromium from industrial wastewater using bioremediation, Proceeding of 67th Annual Session of IIChE (CHEMCON-2014) and Indo-Japanese Symposium, jointly organized by Chandigarh Regional Center, IIChE and Dr, SSB University Institute of Chemical Engineering & Technology, Chandigarh, December 27-30, 2014.

Madhuri Nori, Suresh Gupta, Saee Vyawahare, Development of nano-particles using physical/chemical methods for the recovery of heavy metals from industrial waste water, Proceeding of 67th Annual Session of IIChE (CHEMCON-2014) and Indo-Japanese Symposium, jointly organized by Chandigarh Regional Center, IIChE and Dr, SSB University Institute of Chemical Engineering & Technology, Chandigarh, December 27-30, 2014.

Subhajit Majumder, Nimisha K, Suresh Gupta, Optimization of Process Parameters in Bioremediation of Cr(VI) Contaminated Aqueous Solution through Response Surface Methodology, 2014 AIChE Annual Meeting, Atlanta Marriott Marquis, Hilton Atlanta,  November 16-21, 2014.

Suresh Gupta and Utkarsh Maheshwari, Copper (II) Removal Using Activated Neem Bark from Waste Water As a Low Cost Adsorbent: Column Studies, 2014 AIChE Annual Meeting, Atlanta Marriott Marquis, Hilton Atlanta,  November 16-21, 2014.

Pratibha Pal, Somesh Mishra, Suresh Gupta, Smita Raghuvanshi,  Utilizatilization of Mixed Culture and Isolated Species for Biomitigation of CO2, 2014 AIChE Annual Meeting, Atlanta Marriott Marquis, Hilton Atlanta,  November 16-21, 2014.

Saee Vyawahare, Saswat Kumar Pradhan, Suresh Gupta, Removal of Heavy Metal Ions from Industrial Waste Water Using Metallic Nanoparticles as Adsorbents. Proceedings of National Conference on Nanotechnology and Renewable Energy, Department of Applied Sciences and Humanities, Jamia Millia Islamia, New Delhi, April 28 – 29, 2014.

Subhajit Majumder, Amrita Singh, Smita Raghuvanshi, Suresh Gupta, Bioremediation growth kinetics of Cr(VI) contaminated aqueous solution using Pseudomonas sp., an indigenous microbial strain isolated from aerobic mixed culture, Proceedings of 2014 International Congress on Environmental, Biotechnology, and Chemistry Engineering (CEBCE 2014), SAISE, Pune, India, February 21-23, 2014.

Saee Vyawahare, Suresh Gupta, Removal of Cu(II) from Aqueous Solution using Nanoparticles as Adsorbents, Proceedings of International Symposium & 66th Annual Session of IIChE in association with International Partners (CHEMCON-2013), Department of Chemical Engineering, University Institute of Chemical Technology, Mumbai, India, December 27-30, 2013.

Arun, Utkarsh Maheshwari, Suresh Gupta, Removal of Zn(II) from Aqueous Solutions using Activated Neem Bark as an Adsorbent: Equilibrium Studies, Proceedings of International Symposium & 66th Annual Session of IIChE in association with International Partners (CHEMCON-2013), Department of Chemical Engineering, University Institute of Chemical Technology, Mumbai, India, December 27-30, 2013.

Utkarsh Maheshwari, Suresh Gupta, Column studies for Chromium(VI) removal using Activated Neem Bark as a low cost adsorbent, Proceedings of International Symposium & 66th Annual Session of IIChE in association with International Partners (CHEMCON-2013), Department of Chemical Engineering, University Institute of Chemical Technology, Mumbai, India, December 27-30, 2013.

Subhajit Majumder, Gayathri Gangadhar, Smita Raghuvanshi, Suresh Gupta, Bioremediation of Cu(II) Contaminated Aqueous Solution Using Acinetobactor sp., Proceedings of International Symposium & 66th Annual Session of IIChE in association with International Partners (CHEMCON-2013), Department of Chemical Engineering, University Institute of Chemical Technology, Mumbai, India, December 27-30, 2013.

Avinash Narayan, Suresh Gupta, Smita Raghuvanshi, Experimental studies for biodegradation of dichloromethane, Proceedings of International Symposium & 66th Annual Session of IIChE in association with International Partners (CHEMCON-2013), Department of Chemical Engineering, University Institute of Chemical Technology, Mumbai, India, December 27-30, 2013.

Subhajit MajumderAmrita, Smita Raghuvanshi, Suresh Gupta, Bioremediation of Cr(VI) Contaminated Aqueous Solution using Pseudomonas sp., Proceedings of International Symposium & 66th Annual Session of IIChE in association with International Partners (CHEMCON-2013), Department of Chemical Engineering, University Institute of Chemical Technology, Mumbai, India, December 27-30, 2013.

Somesh Mishra, Pratibha Pal, Suresh Gupta, Smita Raghuvanshi, Experimental studies for CO2 mitigation using acclimated mixed culture, Proceedings of International Symposium & 66th Annual Session of IIChE in association with International Partners (CHEMCON-2013), Department of Chemical Engineering, University Institute of Chemical Technology, Mumbai, India, December 27-30, 2013.

Gayathri Gangadhar, Subhajit Majumder, Smita Raghuvanshi, Suresh Gupta, Biofiltration of Cu (II) Using Acclimated Mixed Culture, Proceedings of 2013 AIChE Annual Meeting, Hilton San Francisco Union Square, San Francisco, CA, November 3 – 8, 2013.

Subhajit Majumder, Gayathri Gangadhar, Smita Raghuvanshi, Suresh Gupta, Bioremediation of Cu(II) contaminated aqueous solution using Acinetobactor Sp. Proceedings of 2013 AIChE Annual Meeting, Hilton San Francisco Union Square, San Francisco, CA, November 3 – 8, 2013.

Utkarsh Maheshwari, Bhuvanesh M., Suresh Gupta, Kinetic studies for the removal of copper from industrial wastewater using activated neem (Azadirachta indica) bark. Proceedings of 2013 AIChE Annual Meeting, Hilton San Francisco Union Square, San Francisco, CA, November 3 – 8, 2013.

Somesh Mishra, Suresh Gupta, Smita Raghuvanshi, A green approach to mitigate CO2 using mixed microbial culture. Proceedings of 2013 AIChE Annual Meeting, Hilton San Francisco Union Square, San Francisco, CA, November 3 – 8, 2013.

Isha Nagpurkar, Somesh Mishra, Smita Raghuvanshi, Suresh Gupta, Mitigation of CO2 Using microalgae Chlorella minutissima, Proceedings of International Symposium & 65 th Annual Session of IIChE in association with International Partners (CHEMCON-2012), Department of Chemical Engineering, Dr. B.R. Ambedkar National Institute of Technology, Jalandhar, India, December 27-30, 2012.

Somesh Mishra, Smita Raghuvanshi, Suresh Gupta, Batch studies on biomitigation of Carbon dioxide (CO2) using mixed culture , Proceedings of International Symposium & 65 th Annual Session of IIChE in association with International Partners (CHEMCON-2012), Department of Chemical Engineering, Dr. B.R. Ambedkar National Institute of Technology, Jalandhar, India, December 27-30, 2012.

Utkarsh Maheshwari, Suresh Gupta, Equilibrium Studies for the Removal of Copper (II) using Activated Neem Bark as a Low Cost Adsorbent, Proceedings of International Symposium & 65 th Annual Session of IIChE in association with International Partners (CHEMCON-2012), Department of Chemical Engineering, Dr. B.R. Ambedkar National Institute of Technology, Jalandhar, India, December 27-30, 2012.

Smita Raghuvanshi, Suresh Gupta, B.V. Babu, Biodegradation studies of methyl, ethyl and butyl acetates by acclimated mixed culture. Proceedings of 2012 Annual Meeting of AIChE, Pittsburg, PA, USA, October 28- November 2, 2012.

Subhajit Majumder, Gayathri Gangadhar, Smita Raghuvanshi, Suresh Gupta, Bioremediation of Cu(II) Metal From Aqueous Solution by Acclimated Mixed Culture. Proceedings of 2012 Annual Meeting of AIChE, Pittsburg, PA, USA, October 28- November 2, 2012.

Suresh Gupta,  Utilization of mixed microbial culture to mitigate carbon dioxide, Proceedings of 3rd World Congress on Biotechnology, OMICS Group, HICC, Hyderabad, India, September 13-15, 2012.

Subhajit Majumder, Smita Raghuvanshi, Suresh Gupta, Bioremediation of Cr(VI) by acclimated mixed culture: kinetic study, Proceedings of 3rd World Congress on Biotechnology, OMICS Group, HICC, Hyderabad, India, September 13-15, 2012.

Somesh Mishra, Smita Raghuvanshi, Suresh Gupta, Feasibility of Mixed Culture to Mitigate CO2, "Proceedings of National Conference (TACEE – 2012) on Technological Advancements in Chemical and Environmental Engineering, March 23-24, 2012, Pilani, India.

Gayathri Gangadhar, Subhajit Majumder, Smita Raghuvanshi, Suresh Gupta, Bioremediation kinetics of Cu(II) using acclimated mixed culture, Proceedings of Technological Advancements in Chemical and Environmental Engineering (TACEE-2012), Department of Chemical Engineering, BITS-Pilani, Pilani Campus, India, May 23-24, 2012.

R. J. Bhargavi, V. Vadlamudi, Suresh Gupta, Optimisation of heat exchanger area requirement for a natural gas processing plant using genetic algorithm, Proceedings of International Symposium & 64th Annual Session of IIChE in association with International Partners (CHEMCON-2011), Department of Chemical Engineering, M.S. Ramaiah Institute of Technology, Banglore, India, December 27-29, 2011.

D. Aditya, R. J. Bhargavi, Suresh Gupta, Kinetics studies for the removal of Cr(VI) from wastewater using aluminum based nanoadsorbent, Proceedings of International Symposium & 64th Annual Session of IIChE in association with International Partners (CHEMCON-2011), Department of Chemical Engineering, M.S. Ramaiah Institute of Technology, Banglore, India, December 27-29, 2011.

Smita Raghuvanshi, Suresh Gupta, B. V. Babu, Application of biofilter system for removal of ethyl acetate, Proceedings of International Symposium & 64th Annual Session of IIChE in association with International Partners (CHEMCON-2011), Department of Chemical Engineering, M.S. Ramaiah Institute of Technology, Banglore, India, December 27-29, 2011.

Subhajit Majumder, D. D. Biswas, Smita Raghuvanshi, Suresh Gupta, Biodegradation kinetics of Zn (II) using acclimated mixed culture, Proceedings of International Symposium & 64th Annual Session of IIChE in association with International Partners (CHEMCON-2011), Department of Chemical Engineering, M.S. Ramaiah Institute of Technology, Banglore, India, December 27-29, 2011.

Subhajit Majumder, Smita Raghuvanshi, Suresh Gupta, Biodegradation kinetics of Cr (VI) by acclimated mixed culture, Proceedings of 5th International Congress of Chemistry and Environment (ICCE-2011) in association with International Partners, Glory Beach Resort, Port Dickson, Negeri Senbilan, Malaysia, May 27-29, 2011.

D. Aditya, Rohan Parmar, Suresh Gupta, Nano-adsorbents for wastewater treatment: a review, Proceedings of 5th International Congress of Chemistry and Environment (ICCE-2011) in association with International Partners, Glory Beach Resort, Port Dickson, Negeri Senbilan, Malaysia, May 27-29, 2011.

Smita Raghuvanshi, Suresh Gupta, Environmental impact assessment of metro rail project, Proceedings of 5th International Congress of Chemistry and Environment (ICCE-2011) in association with International Partners, Glory Beach Resort, Port Dickson, Negeri Senbilan, Malaysia, May 27-29, 2011.

Utkarsh Maheshwari, Suresh Gupta, Batch studies for the removal of zinc from aqueous solution using chemically activated neem bark, Proceedings of International Symposium & 64th Annual Session of IIChE in association with International Partners (CHEMCON-2011), Department of Chemical Engineering, M.S. Ramaiah Institute of Technology, Banglore, India, December 27-29, 2011.

Utkarsh Maheshwari, Suresh Gupta, Kinetic and equilibrium studies of Cr (VI) removal from aqueous solutions using activated neem bark, Proceedings of 5th International Congress of Chemistry and Environment (ICCE-2011) in association with International Partners, Glory Beach Resort, Port Dickson, Negeri Senbilan, Malaysia, May 27-29, 2011.

Suman, N. K. Singh, Suresh Gupta, Total cost targeting of heat exchanger network by incorporating piping cost using pinch design method, Proceedings of Conference on International Conference on Recent Advances In Chemical Engineering And Technology, Indian Institute of Chemical Engineers, Chemical Engineering Group, Cochin University of Science and Technology, Cochin, India, 10-12 March 2011.

R. Kalia, A. Tomar, Suresh Gupta, Boundary layer flow over porous vertical parallel plates with heat radiation, Proceedings of International Symposium & 63rd Annual Session of IIChE in association with International Partners (CHEMCON-2010), Department of Chemical Engineering, Annamalai University, December 27-29, 2010.

M. A. Jha, A. Chajjer, D. Aditya, Suresh Gupta, Removal of phenol from wastewater using ultrasonic degradation, Proceedings of International Symposium & 63rd Annual Session of IIChE in association with International Partners (CHEMCON-2010), Department of Chemical Engineering, Annamalai University, December 27-29, 2010.

Utkarsh Maheshwari, Suresh Gupta, Kinetics and equilibrium studies of chromium (VI) removal from aqueous solutions using neem bark as a low cost adsorbent, Proceedings of International Symposium & 63rd Annual Session of IIChE in association with International Partners (CHEMCON-2010), Department of Chemical Engineering, Annamalai University, December 27-29, 2010.

Subhajit Majumder, Suresh Gupta, Biofiltration for heavy metals removal: a state-of-the-art review, Proceedings of International Symposium & 63rd Annual Session of IIChE in association with International Partners (CHEMCON-2010), Department of Chemical Engineering, Annamalai University, December 27-29, 2010.

Amita Ummadisingu, Suresh Gupta,  Utilization of chitosan prepared from seafood industry waste to clean up oil spills, Proceedings of International Symposium & 62nd Annual Session of IIChE in association with International Partners (CHEMCON-2009), Andhra University, Visakhapatnam, December 27-30, 2009.

Suresh Gupta, B. V. Babu, Removal of Cr(VI) from wastewater using fly ash as an adsorbent, Proceedings of International Symposium & 61st Annual Session of IIChE in association with International Partners (CHEMCON-2008), Panjab University, Chandigarh, December 27-30, 2008.

Suresh Gupta, B. V. Babu, Economic feasibility analysis of low cost adsorbents for the removal of Cr(VI) from waste water, Proceedings of International Convention on Water Resources Development and Management (ICWRDM), BITS Pilani, October 23-26, 2008.

Suresh Gupta, B. V. Babu, Removal of toxic metal Cr(VI) from industrial wastewater using sawdust as adsorbent: equilibrium, kinetics and regeneration studies, Proceedings of 18th International Congress of Chemical and Process Engineering (CHISA-2008), Prague, Czech Republic, August 24-28, 2008.

Suresh Gupta, B. V. Babu, Adsorption of chromium (VI) by a low-cost adsorbent prepared from tamarind seeds, Proceedings of International Symposium & 59th Annual Session of IIChE in association with International Partners (CHEMCON), GNFC Complex, Bharuch, Dec 27-30, 2006.

Suresh Gupta, B. V. Babu, Adsorption of Cr(VI) by a low-cost adsorbent prepared from neem leaves, Proceedings of National Conference on Environmental Conservation (NCEC-2006), BITS-Pilani, September 1-3, 2006.

Suresh Gupta, B. V. Babu, Modeling and simulation of fixed bed adsorption column: effect of operating variables, Proceedings of International Congress Chemistry and Environment (ICCE-2005), Indore, December 24-26, 2005, pp. 391-394, 2005.

Suresh Gupta, B. V. Babu, Kinetic modeling of fixed bed adsorption column, Proceedings of International Symposium & 58th Annual Session of IIChE in association with International Partners (CHEMCON-2005), New Delhi, December 14-17, 2005.

B. V. Babu, Suresh Gupta, Modeling and simulation for dynamics of packed bed adsorption, Proceedings of International Symposium & 57th Annual Session of IIChE in association with AIChE (CHEMCON-2004), Mumbai, December 27-30, 2004.


Books/Book Chapters

Total nos. of book/book chapters: 11

Rachael J. Barla, Abhishek Anand, Smita Raghuvanshi, Suresh Gupta, Chapter 3 - Life cycle assessment of renewable diesel production, Editor(s): Dipesh Kumar, Bhaskar Singh, Sanjay Kumar Gupta, Renewable Diesel, pp. 65-86, 2024 (Elsevier), 2024 https://doi.org/10.1016/B978-0-323-91153-5.00003-0.

Shailesh A. Ghodke, Utkarsh Maheshwari, Suresh Gupta, Bharat A. Bhanvase, Chapter 7: Treatment of hazardous industrial solid wastes from electroplating industry: a comprehensive review, Book Chapter edited by Nishikant A. Raut, Dadasaheb M. Kokare, Bharat A. Bhanvase, Kirtikumar R. Randive, Sanjay J. Dhoble, 360-Degree Waste Management, Vol. 2, pp. 141-167, 2023 (Elsevier)

Rachael J Barla, Smita Raghuvanshi, Suresh Gupta, Chapter 10 - Process integration for the biodiesel production from biomitigation of flue gases, Book Chapter edited by Bhaskar Singh, Abhishek Guldhe,

Waste and Biodiesel, pp. 191-215, 2022 (Elsevier). https://doi.org/10.1016/B978-0-323-90909-9.00002-2.

Anil Kumar K, Garima Verma, Smita Raghuvanshi and Suresh Gupta, Defluoridation studies using graphene oxide based nanoadsorbents, Book Chapter edited by Sanjay K. Sharma, Advances in Green and Sustainable Chemistry, Elsevier, 2020.

Shailesh A. Ghodke, Utkarsh Maheshwari, Suresh Gupta, Shirish H. Sonawane, Bharat A. Bhanvase, Chapter 11: Nanomaterials for Adsorption of pollutants and heavy metals: Introduction, mechanism and challenges, Handbook of Nanomaterials for Wastewater Treatment: Fundamentals and Scale up Issues Edited by  Prof.  Bharat Bhanvase, Prof.   Shirish Sonawane, Prof.   Vijay Pawade and Prof. Aniruddha Pandit, Elsevier Publications, 2020 (Link: https://www.elsevier.com/books/handbook-of-nanomaterials- or-wastewater-treatment/bhanvase/978-0-12-821496-1)

Sheth, P.N., Suresh Gupta and S. Kumar (2017). Energy Integration in Process Plants. In Sustainable Utilization of Natural Resources, Edited by Prasenjit Mondal and Ajay K. Dalai, CRC Press: 513-537.

Subhajit Majumder, Suresh Gupta and Smita Raghuvanshi, "Removal of dissolved metals by Bio-remediation". In Heavy Metals in Water: Presence, Removal and Safety Edited by Sanjay Sharma, RSC Publishing, UK, August 2014.

Smita Raghuvanshi, Subhajit Majumder, Suresh Gupta, Biofiltration: Essentials, Research and Applications. In Bioremediation and Sustainability: Research and Applications, Edited by Romeela Mohee and Ackmez Mudhoo, Scrivener Publishing LLC., USA, March 2012.

H.K. Mohana, Suresh Gupta, Pratik N Sheth (editors), Proceedings of the 8th Annual Session of Students' Chemical Engineering Congress (SCHEMCON 2012) on the theme ‘Energy Efficient Technologies for Green Environment’ held in BITS Pilani during September 21-22, 2012.

Suresh Gupta, B. V. Babu, Simultaneous solution for solid waste management and waste water treatment: Cr(VI) removal as a case study, In Waste Management: Research Advances to Convert Waste to Wealth, Edited by A K Haghi, Nova Science Publishers, USA (2009).

B. V. Babu, Suresh Gupta, Removal of heavy metal pollutants from wastewater using low cost absorbents, In India’s Water Crisis, Edited by K R Gupta, Atlantic Publishers, New Delhi, pp. 79-123, 2008. ISBN: 978-81-269-0958-2 (March 2008).


Selected Journal Papers

  • Kumar, G., Mishra, R. R., & Sharma, A. K. (2021). On Defect Minimization During Microwave Drilling of Borosilicate Glass at 2.45 GHz Using Flowing Dielectric and Optimized Input Power. Journal of Thermal Science and Engineering Applications, 13(3), 031021.
  • Mishra, R. R., & Sharma, A. K. (2020). Effect of input microwave power and insulation on microstructure and tensile properties of cast Al 7039 alloy produced at 2.45 GHz. Journal of Microwave Power and Electromagnetic Energy, 54(4), 312-329.
  • Mishra, R. R., & Sharma, A. K. (2019). Microstructural characteristics and tensile properties of in-situ and ex-situ microwave casts of Al-7039 alloy. Materials Research Express, 6(12), 126591.
  • Mishra, R. R., & Sharma, A. K. (2019). Multi-physics simulation of in situ microwave casting of 7039 Al alloy inside different applicators and cast microstructure. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 233(3), 617-629.
  • Mishra, R. R., & Sharma, A. K. (2018). Microwave heating characteristics of bulk metallic materials and role of oxides. Journal of Materials Science, 53(24), 16567-16584.
  • Sharma, A. K., & Mishra, R. R. (2018). Role of particle size in microwave processing of metallic material systems. Materials Science and Technology, 34(2), 123-137.
  • Mishra, R. R., & Sharma, A. K. (2018). Effect of solidification environment on microstructure and indentation hardness of Al–Zn–Mg alloy casts developed using microwave heating. International Journal of Metalcasting, 12(2), 370-382.
  • Mishra, R. R., & Sharma, A. K. (2017). Effect of susceptor and mold material on microstructure of in-situ microwave casts of Al-Zn-Mg alloy. Materials & Design, 131, 428-440.
  • Mishra, R. R., & Sharma, A. K. (2017). On melting characteristics of bulk Al-7039 alloy during in-situ microwave casting. Applied Thermal Engineering, 111, 660-675.
  • Mishra, R. R., & Sharma, A. K. (2017). Structure-property correlation in Al–Zn–Mg alloy cast developed through in-situ microwave casting. Materials Science and Engineering: A, 688, 532-544.
  •  Gamit, D., Mishra, R. R., & Sharma, A. K. (2017). Joining of mild steel pipes using microwave hybrid heating at 2.45 GHz and joint characterization. Journal of Manufacturing Processes, 27, 158-168.
  • Mishra, R. R., & Sharma, A. K. (2016). On mechanism of in-situ microwave casting of aluminium alloy 7039 and cast microstructure. Materials & Design, 112, 97-106.
  • Mishra, R. R., & Sharma, A. K. (2016). A review of research trends in microwave processing of metal-based materials and opportunities in microwave metal casting. Critical Reviews in Solid State and Materials Sciences, 41(3), 217-255.
  • Mishra, R. R., & Sharma, A. K. (2016). Microwave–material interaction phenomena: heating mechanisms, challenges and opportunities in material processing. Composites Part A: Applied Science and Manufacturing, 81, 78-97.

Selected Conference Papers

  • Bhandari S., Gupta S., Mishra R. R., Sharma A. K., and Arora N., Microstructural and Mechanical Properties of 21-4-N Nitronic Steel Joint Developed using Microwave Energy, International Conference on Precision, Meso, Micro and Nano Engineering (COPEN 2019), December 12-14, 2019.
  • Kumar G, Mishra R. R. and Sharma A. K., On Material Removal Rate in Microwave Drilling of Borosilicate Glass, 7th International Conference on Advancements and Futuristic Trends in Mechanical and Materials Engineering (AFTMME-2019), December 2019.
  • Sharma A. K., Mishra R. R. and Yadav J., Resource-Efficient Melting of Bulk Magnesium Alloy AZ91 using Microwave Energy at 2.45 GHz, Proceedings of the International Conference on Innovative Applied Energy, 14–15 March 2019.
  •  Mishra R. R. and Sharma A. K., Effect of microwave power on properties of in-situ cast of aluminium at 2.45 GHz, Proceedings of the 6th International & 27th All India Manufacturing Technology, Design & Research Conference (AIMTDR -2016), December 2016.
  •  Mishra R. R. and Sharma A. K., A new in-situ casting technique using microwave energy at 2.45 GHz, Proceedings of the India International Science Festival- Young Scientists’ Meet, Delhi, December 2015.
  • Mishra R. R. and Sharma A. K., Rajesha S, Gupta A., Kumar V., Kumar V., Microwave Casting: Exploring a New Approach for Casting Bulk Metals with Microwave Energy, International conference CETCME-2015, March 21-22, 2015.

Papers in refereed journals

  1. M. Amaranatha Raju, T.P. Ashok Babu, C. Ranganayakulu, Investigation of flow boiling heat transfer and pressure drop of R134a in a rectangular channel with wavy fin, International Journal of Thermal Sciences, 147 (2020) 106055, IP 3.5.
  2. C Ranganayakulu, Veeredhi Vasudeva Rao, Measurement of heat transfer coefficient and pressure drops in a compact heat exchanger with lance and offset fins for water based Al2O3 nano-fluids, Heat and Mass Transfer, 1-11, 10.1007/s00231-019-02707-w, 2019.
  3. C. Ranganayakulu, Numerical Analysis of Compact Plate-fin Heat Exchangers for Aerospace Applications” International Journal of Numerical Methods for Heat and Fluid Flow, Vol 28, Issue 2, pp. 395-412, 2018. https://doi.org/10.1108/HFF-08-2016-0313, IP 2.45
  4. C. Ranganayakulu, Xing Luo, Stephan Kabelac, The Single-blow transient Testing technique for Offset and Wavy Fins of Compact Plate-fin heat excahngers, Journal of Applied thermal Engineeing,, No. 111, pp 1588-1595, 2017. https://doi.org/10.1016/j.applthermaleng.2016.05.118, 3.444
  5. Amaranatha Raju Muppala, M.E; Ashok Babu T P; Chennu Ranganayakulu, “Boiling heat transfer and pressure drop analysis of R134a in a brazed heat exchanger with offset strip fins" Heat Mass Transfer, Vol. 53, No. 10, pp: 3167-3180, Springer, DOI 10.1007/s00231-017-2060-1 2017., IP 1.494
  6. Amaranatha Raju Muppala, M.E; Ashok Babu T P, C. Ranganayakulu, Heat Transfer and Friction correlations for R134a with Offset strip fin surface, Int. Journal of Aeronautical Society of India, Vol. 69, No. 4, pp: 615-627, November 2017.
  7. C. Ranganayakulu,“Steady state and transient analysis of Compact plate fin heat exchanger fins for generation of design data using CFD”, International J of Numerical Methods for Heat & Fluid Flow, vol. 26, Iss:2, pp:440-460, 2016. DOI: 10.1016/j.ijheatmasstransfer.2009.03.026                                                                          
  8. K.V.Ramana Murthy, Mahesh Bondhu, C. Ranganayakulu. T.P. Ashok Babu, Condensation Heat Transfer and Pressure drop of R134a saturated vapour inside a brazed plate fin heat exchanger with serrated fin, 53(1), Paper DOI 10.1007/s00231-016-1827-0, Online in J of Heat and Mass Transfer, 2016.
  9. K V Ramana Murthy, C. Ranganayakulu, T P Ashok Babu, “Influence of hydraulic diameter on heat transfer and pressure drop during condensation of R134a refrigerant in a brazed plate fin heat exchangers” Int. J Engineering and Innovative Technology(IJEIT), Vol. 5, Issue 7, ID: IJEIT201512-4802, 2016. Pp:21-31, ID: IJET 201512-4802, 2016, IP 0.799
  10. Amaranatha Raju. Muppala, Ashok Babu T.P, Ranganayakulu Chennu, All Electric Cooling system for unmanned aircrafts, Int. Journal of Aeronautical Society of India, Vol. 67, No. 4, pp:488-499,2015 .
  11. R. BalaSundar Rao, G. Ranganath&C. Ranganayakulu, Development of colburn ‘j’ factor and fanning friction factor ‘f’ correlations for compact surfaces of the triangular perforated fins using CFD, International Journal of Heat Transfer Engineering, Volume 37, Issue 2, pp 150-161, 2016. https://doi.org/10.1080/01457632.2015.1044395
  12. K V Ramana Murthy, C. Ranganayakulu, T P Ashok Babu, Thermodynamic Analysis Of Vapor Compression Refrigeration System For Aircraft With Refrigerant R134a, Int. Journal of Aerospace Sciences and Technologies” Aeronautical Society of India, Vol. 68, No. 1, Feb. 2016. ISSN:0972.950x
  13. K V Ramana Murthy, C. Ranganayakulu, T P Ashok Babu Development of Heat Transfer Coefficient and Friction Factor Correlations for Serrated Fins in Water Medium using CFD,International Journal of Physical Science and Application,     5(3), 238-248, 2015. doi:10.17265/2159-5348/2015/03.006.
  14. Amaranatha Raju. Muppala, Ashok Babu T.P, Ranganayakulu Chennu, Development of single phase heat transfer correlations for water and R134a in rectangular channel with smooth wavy fin, International Journal of Physical Science and Application,     5(3), 199-208, 2015. doi:10.17265/2159-5348/2015/03.006., IP 0.773
  15. R. BalaSundar Rao, G. Ranganath&C. Ranganayakulu, “ Colburn ‘j’ factor and fanning friction factor ‘f’ correlations of Triangular Plain fins surface of a compact heat exchanger using CFD"Applied Mechanics and Materials, Vol 787, pp 207-211, doi:10.4028/www.scientific.net/AMM.787.207, Switzerland, 2015.
  16. R. BalaSundar Rao, G. Ranganath&C. Ranganayakulu," Heat Transfer and pressure drop correlations of Rectangular perforated fin surface of a Compact Heat Exchanger" international j of Advanced Manufacturing Technology’ Annexure II, 7941, ISSN:0286-3768, Springer Verlag, Germany, 2015., IP 2.601
  17. C. Ranganaykulu, S Kabelac, Boiling of   R134a   in a   Compact Plate-fin Heat Exchanger having Offset strip fins, ASME- Journal of Heat Transfer, Vol. 137, N0. 12, 2015, No. HT-14-1235. No. HT 14-1235, IP 1.602
  18. R. BalaSundar Rao, G. Ranganath&C. Ranganayakulu, Development of Colburn ‘j’ factor and fanning friction factor ‘f’ correlations for compact heat exchangers plains fins by using CFD, International Journal of Heat and Mass Transfer, Volume 49(7), pp 991-1000, 2013. https://doi.org/10.1080/01457632.2015.1044395
  19. A.C. Bhaskar, M. Palanikumar, C. Ranganayakulu& S. Paul Vizhian, Endurance Life Estimation of Aircraft Compact Heat Exchanger, Int. Journal of Aerospace Science and Technologies, Volume 64, No. 4, Nov. 2012, pp 248-258
  20. Pallavi P.Ranganayakulu C., Development of Heat Transfer coefficient and Friction factor correlations for Offset fins using CFD,  Int. Journal of Numerical Methods for Heat and Fluid Flow, Volume 21, No. 8, pp 935-951, 2011. https://doi.org/10.1108/09615531111177732.
  21. L. Sheik Ismail, R. Velraj and C. Ranganayakulu, Studies on pumping power in terms of pressure drop and heat transfer characteristics of compact plate-fin heat exchangers – A review International J of Renewable and Sustainable Energy Reviews, 14, 478-485, 2010. DOI: 10.1016/j.rser.2009.06.033 , IP 6.55
  22. L. Sheik Ismail, C. Ranganayakulu and Ramesh K. Shah, Numerical study of flow patterns of compact plate-fin heat exchangers and generation of design   data for offset and wavy fins, International J of Heat and Mass Transfer, 52, 3972-3983, 2009. 10.1016/j.ijheatmasstransfer.2009.03.026
  23. Ranganayakulu C., Gerhard Herres, Heat Transfer from Horizontal Tubes in Pool Boiling: Influence of 3-Dimensional Heat Conduction in the Wall of the Evaporator Tube-A Finite Element Analysis, Heat and Mass Transfer Journal, Springer-Verlag, 42, 271-278, 2006.
  24. Dieter Gorenflo, Elisabeth Danger, Andrea Luke, Stephan Kotthoff, Untung Chandra, Ranganayakulu C., Bubble Formation with Pool Boiling on Tubes with or without Basic Surface Modifications for Enhancement, International Journal of Heat and Fluid Flow, 25, 288-297, 2004. 10.1016/j.ijheatfluidflow.2003.11.018
  25. Ranganayakulu C., Seetharamu K.N., The Combined Effects of Wall Longitudinal Heat Conduction and Inlet Flow Non-uniformity on Thermal Performance of Cross Flow Plate-Fin Heat Exchanger, International Journal of Heat and Mass Transfer, 36, 247-256, 2000. 10.1007/s002310050392, IP: 3.891
  26. Ranganayakulu C., Seetharamu K.N., The Combined Effects of Wall Longitudinal Heat Conduction, Inlet Flow Non-uniformity and Temperature Non-uniformity on Thermal Performance of Cross Flow Plate-Fin Heat Exchanger, International Communications in Heat and Mass Transfer, 26, 669-678, 1999. https://doi.org/10.1016/S0735-1933(99)00053-6, IP 4.113
  27. Ranganayakulu C., Seetharamu K.N., Sreevatsan K. V., The Combined Effects of Wall Longitudinal Heat Conduction, Inlet Flow Non-uniformity and Temperature Non-uniformity on Thermal Performance of Cross Flow Tube-Fin Heat Exchanger, InternationalJournal ofHeat and Mass Transfer, 42, 263-273, 1999. 10.1016/S0017-9310(98)00156-2
  28. Ranganayakulu C., Seetharamu K.N., Sreevatsan K. V., The Effects of Longitudinal Heat Conduction in Compact Plate-Fin and Tube-Fin Heat Exchangers using a Finite Element Model, InternationalJournal ofHeat and Mass Transfer, 40, 1261-1277, 1997.  10.1016/S0017-9310(96)00182-2
  29. Ranganayakulu C., Seetharamu K.N., Sreevatsan K. V., The Effects of    Inlet Fluid Flow Non-uniformity on Thermal Performance and Pressure Drops in Cross-Flow Plate-Fin Compact Heat Exchangers, InternationalJournal ofHeat and Mass Transfer, 40, 27-38, 1997. 10.1016/S0017-9310(96)00087-7
  30. Ranganayakulu C., Seetharamu K.N., The Combined Effects of Inlet Flow Non-uniformity and Temperature Non-uniformity on Thermal Performance of Cross Flow Plate-Fin Heat Exchanger, International Journal of Warme und Stoffubertragung, 32, 375-383, 1997.

Journal Papers under Review

  1.  A.C Bhaskar, C. Ranganayakulu, S. Paul Vizhian & K.N. Seetharamu, “ Estimation of Endurance life of Compact Heat Exchanger used in Aerospace application by computational and Experimental approach”, Communicated to J of Heat and Mass Transfer, 2020.

  2. Bhavani Sankar G, Ranganayakulu Chennu, Configuration Studies of Aircraft Environmental System using Exergy Analysis of Compact Heat Exchangers for Multi-Disciplinary Optimization, Submitted to J of Thermal Analysis and Calorimetry, No. JTAC-D-22-00319, 16-2-2022.

  3. Raghu Vamsi P, Sombhotla Mani Krishna Hemanth C. Ranganayakulu, Generation of Colburn-j factor and Friction-f factor for the plain rectangular fins of a compact heat exchanger using CFD approach, submitted to International Journal of Numerical Methods for Heat and Fluid Flow, HFF-02-2022-0113,20-2-2022.

  4. Partha Pratim Kemprai, C. Ranganayakulu, P. Muthukumar, Numerical and Experimental Investigation for Water on Serrated Fins of Compact Plate Fin Heat Exchanger, submitted to Journal of Applied Thermal Engineering, 2022. 

  5. Vinay Pratap Singh Negi and Chennu RanganayakuluOptimization of Rifled Tube by Parametric Changes Using CFD for Goodness Factor Enhancement, submitted to Applied Thermal Engineering journal, October 2022


 Papers in conference proceedings

  1. Amit Hedge Sanjay and Chennu Ranganayakulu, CFD Analysis of a Precooler for Hypersonic Propulsion, presented in 16th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics (HEFAT-ATE), held online, Amsterdam, Netherlands, ID No. 157, August 8-10, 2022.
  2. Pratyush Padmanabhan, Sanatkumar Samvit Rajagopalan and Chennu Ranganayakulu, Aerodynamic and Thermal Optimization of Plate Heat Exchanger Fin Arrangements, 9th International and 49th National Conference on Fluid Mechanics and Fluid Power (FMFP) to be held, December 14-16, 2022, IIT Roorkee, Uttarakhand, India.
  3. Ankur Mishra and Chennu Ranganayakulu, Numerical analysis of generation of Colburn-j factor for the Pin fins of a compact heat exchanger using CFD approach, 9th International and 49th National Conference on Fluid Mechanics and Fluid Power (FMFP) to be held, December 14-16, 2022, IIT Roorkee, Uttarakhand, India.
  4. Pankaj Kumar and Chennu Ranganayakulu, Numerical analysis of generation of Colburn-j factor for the plain triangular fins of a compact heat exchanger using CFD approach, 9th International and 49th National Conference on Fluid Mechanics and Fluid Power (FMFP) to be held, December 14-16, 2022, IIT Roorkee, Uttarakhand, India.
  5. Vinay Pratap Singh Negi, Chennu Ranganayakulu, Optimization of Rifled Tube by Parametric Changes Using   CFD for Goodness Factor Enhancement, ICUE2022, AIT, Thailand, October 26-28, 2022.
  6. C. Rangagayakulu, Compact Plate-Fin Heat Exchangers as Phase Change and Nano-Fluid Heat Transfer Applications in Aerospace Industry. XXV National Heat and Mass Transfer & 3rd ISHMT-ATE Heat and Mass Transfer Conference, 28-31 December 2019, IIT, Roorkee.
  7. BhavaniSankar G, Ranganayakulu C, Exergy Analysis application for the configuration optimization of an aircraft ECS, XXV National Heat and Mass Transfer & 3rd ISHMT-ATE Heat and Mass Transfer Conference, 28-31 December, IIT, Roorkee, India, IHMTC2019-POS-386.
  8. Partha Pratim Kemprai, Chennu Ranganayakulu and P Muthukumar Numerical and Experimental Investigation in Compact Heat Exchanger Surfaces with wavy fins, XXV National Heat and Mass Transfer & 3rd ISHMT-ATE Heat and Mass Transfer Conference, 28-31 December, IIT, Roorkee, India, IHMTC2019-PRE-111.
  9. R. BalaSundar Rao, G. Ranganath&C. Ranganayakulu, “ Colburn ‘j’ factor and fanning friction factor ‘f’ correlations of Triangular Plain fins surface of a compact heat exchanger"Presented in Thermacomp2018, held at IISc, Bangalore, 9-11 July 2018.
  10. Ramana Murthy, Ashok Babu T P,C Ranganayakulu and Xing Luo, Experimental investigation on heat transfer coefficients and frictional pressure drop during R134a condensation inside a plate-fin heat exchanger with wavy fin, Presented in 16th Int. Heat and Mass Transfer Conference, held at Beijing China, August 10-15, 2018.
  11. Ramana Murthy, Ashok Babu T P and C Ranganayakulu, Experimental investigation of local heat transfer coefficient and frictional pressure drop during R134a condensation inside a plate-fin heat exchanger with serrated fins, Presented in NCRA 2018 held at NIT Suratkal, India, May 2018.
  12. G BhavaniSankar and C Ranganayakulu, A CRITICAL REVIEW OF CONDENSATION HEAT TRANSFER COEFFICIENT CORRELATIONS,Presented in Thermacomp2018 held at Indian Institute of Science,India, 9-11 July, 2018.
  13. G BhavaniSankar and C Ranganayakulu, Configuration Studies of an Aircraft Environmental Control System using Exergy Analysis, Presented in NCRA 2018 held at NIT Suratkal, India May 2018.
  14. C Ranganayakulu, Veeredhi Vasudeva Rao, “Measurement of Heat Transfer Coefficient in a Compact Heat Exchanger with Lance and Offset Fins for water based Al2O3Nanofluids”, 24th National and 2nd International ISHMT-ASTFE Heat and Mass Transfer (ISHMT 2017), held at BITS Pilani Campus Hyderabad, India, Dec. 27-30, 2017.
  15. G BhavaniSankar, C Ranganayakulu, Exergy Analysis of Aircraft Environmental Control System, 24th National and 2nd International ISHMT-ASTFE Heat and Mass Transfer, BITS Pilani campus Hyderabad, India, 27-30 Dec. 2017,
  16. C. Ranganayakulu, Numerical analysis of Compact Plate-fin Heat Exchangers for Aerospace applications in 4th international conference on “Computational Methods for Thermal Problems (Thermacomp 2016)” held at Georgia Tech, Atlanta, USA, 6-8 July, 2016 (keynote Talk).
  17. C. Ranganayakulu, Visiting Researcher talk on “Design and Development of Environmental Control Systems and Compact Heat Exchangers for Aerospace applications” at UNISA, Johannesburg , South Africa, 25th May 2016.
  18. C. Ranganayakulu, Compact Heat Exchanger Analysis and Development for Aerospace Applications, Key note talk at 23rd National Heat and Mass Transfer Conference & 1th Int. ISHMT-ASTFE Heat and Mass Transfer Conference, ISRO, Trivandrum, Kerala, India, 2015. (Keynote talk)
  19. C. Ranganayakulu, “Generation of Single-phase and Two-phase Design Data for Compact Heat Exchanger Fins for Aerospace Applications” 2nd International workshop on Compact Heat exchangers , held at PES University, Bangalore, India, Dec. 21-22, 2015, Invited talk.
  20. K V Ramana Murthy, Mahesh Bondhu, C. Ranganayakulu, T P Ashok Babu, V Vasudeva Rao, Development Of Vapour Compression Refrigeration System Test Rig And Evaluation Of Test Data For R134a Condensation In Compact Heat Exchangers With Serrated Fin, 11th Int. Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, HEFAT2015, University of Pretoria, South Africa, paper #1570073007, pp 184-193.
  21. C. Ranganayakulu, Xing Luo, Stephan Kabelac, The Single-blow transient Testing technique for Offset and Wavy Fins of Compact Plate-fin heat excahngers, Proceedings of 23rd National Heat and Mass Transfer Conference & 1th Int. ISHMT-ASTFE Heat and Mass Transfer Conference, Trivandrum, Kerala, India, 2015.
  22. R. BalaSundar Rao, G. Ranganath & C. Ranganayakulu,“ Heat Transfer and pressure drop correlations of Rectangular perforated fin surface of a Compact Heat Exchanger" Int. Conference on advances in Design and Manufacturing, ICADM 14, NIT, Trichy, India, Dec. 5-7, 2014, Volume II, pp 1388-1393.
  23. R. BalaSundar Rao, G. Ranganath&C. Ranganayakulu,"Development of Colburn ‘j’ factor and fanning friction factor ‘f’ correlations of Triangular Plain fins surface of a compact heat exchanger using CFD" Presented in Int. Conference on Sustainable Energy Resources, Materials and Technologies, ISERMAT-2015, No. 212, SSN College of Engineering, Chennai, 8-9 Jan 2015..
  24. C. Ranganayakulu, “Steady state and transient analysis of Compact plate fin heat exchanger fins for generation of design data using CFD”, 3rd International conference on computational methods for Thermal Problems, June 2-4, Lake Bled, Slovenia, 2014.
  25. C. Ranganayakulu, Iris Mersmann, S. Kabelac,Boiling of   R134a   in a   Compact Plate-fin Heat Exchanger having Offset strip fins, Proceedings of 22nd National Heat and Mass Transfer & 11th ISHMT-ASME Heat and Mass Transfer Conference, held at IIT Kharagpur, India , 2013.
  26. C. Ranganayakulu, Alternate Environmental Control System for Aircraft applications in view of Fuel saving and Renewable Energy, 2012 International Conference on Renewable Energy Policy, held at Taipei, Taiwan, 11-15 November 2012.
  27. C. Ranganayakulu, CFD STUDIES ON COMPACT PLATE-FIN HEAT EXCHANGERS AND GENERATION OF DESIGN DATA, Second International Conference on Computational Methods for Thermal Problems, ThermaComp2011, September 5-7, 2011, Dalian, China, edited by X.K.Li, N.Massarotti and P.Nithiaras.
  28. L. Sheik Ismail, Siva Kumar, C. Ranganayakulu, Evaluation of Ejector Performance for Aircraft Compact Heat Exchanger Application ,XX National Heat and Mass Transfer & IX ISHMT-ASME Heat and Mass Transfer Conference, held at IIT, Mumbai, India, January 4-6, 2010.
  29. Ranganayakulu C., FEM and CFD analysis of Compact Plate –fin Heat Exchangers for Aerospace Applications, International Workshop on Compact Heat Exchangers for Aerospace Applications, held at Aeronautical Development Agency, Bangalore, India, 8th - 9th January 2010.
  30. L. Sheik Ismail, N. GovindhaRasu, C. Ranganayakulu, M.A. Ramaswamy, CFD Studies on Multi Jet Ejector Configuration for Improvement of Aircraft Compact Heat Exchanger Performance, 7th International Conference on Enhanced, Compact and Ultra-Compact Heat Exchangers: From Micro-scale Phenomena to Industrial Applications, CHE-28, Presented at Costa Rica, 238-246, September 13-18, 2009.
  31. Ranganayakulu C., Ismail L. S., Vasudeva Rao V., Rajeshwar S., Optimization of Wavy Fin Parameters in Compact Heat Exchangers, Proceedings of XIX National Heat and Mass Transfer & VIII ISHMT-ASME Heat and Mass Transfer Conference, held at JNTU, Hyderabad, India, January 3-5, 2008.
  32. Ranganayakulu C., Development and Optimisation of Compact Heat Exchangers for Single Phase and Phase Change Applications, presented in Indo_German workshop held at New Delhi, 30th Oct.-1st November, 2008.
  33. Bhaskar A. C., Ranganayakulu C., Paul Vizhial, Mohan Rao T., Design of Qualification Test Facility and Endurance Tests of Compact Heat Exchanger, Proceedings of 13thInternational Symposium on Air Breathe Engines (ISABE-13) held at Beijing, China, September 2007.
  34. Ranganayakulu C., Ismail L. S., Shah R. K., Numerical Study of Flow Patterns of Compact Plate Fin Heat Exchangers and Generation of Design Data for Offset and Wavy Fins, 6th International Conference on Compact and Ultra Compact Heat Exchanger; Science, Engineering and Technology, held at Potsdam, Germany, CHE2007-0016, pp 113-122, September 16-21, 2007.
  35. Ranganayakulu C., Ismail L. S., Vasudeva Rao V., Rajeshwar S., Ramu M., Investigation of Waviness of Wavy Fins and Maldistribution Effects on the Performance of Compact Plate Fin Heat Exchanger, Proceedings of International Conference on Trends in Product Life Cycle, Modeling, Simulation and Synthesis PLMSS-2006, 159-168, Indian Institute of Science, Bangalore, India, 2006.
  36. Ranganayakulu C., Ismail L. S., Vasudeva Rao V., Rajeshwar S., Ramu M., Effects of Flow Maldistribution in a Compact Plate-Fin Heat Exchanger for Aerospace Applications – a CFD Approach, Proceedings of 17th International Symposium on Transport Phenomena (ISTP17), No. 2 C-III-3, Toyama, Japan, 2006.
  37. Ranganayakulu C., Ismail L. S., Vengudupathi C., Uncertainties in Estimation of Colburn Factor (j) and Friction Factor (f) for Offset Strip Fin and Wavy Fin Compact Heat Exchanger Surfaces, Proceedings of XVIII National Heat and Mass Transfer & VII ISHMT-ASME Heat and Mass Transfer Conference, IIT Guwahati, India, 1096-1103, 2006.
  38. Ranganayakulu C., Gerrard Herres, Heat Transfer from Horizontal Tubes in Pool Boiling: Influence of 3-Dimensional Heat Conduction in the Wall of the Evaporator Tube and Fouling Aspects, Proceedings of International Conference on Heat Exchanger Fouling, KlosterIrsee, Germany, 2005.
  39. Ranganayakulu C., Seetharamu K. N., The Effects of Inlet Fluid Temperature Non-Uniformity in Cross Flow Plate-Fin Heat Exchangers, Proceedings of XVII National Heat and Mass Transfer & VI ISHMT-ASME Heat and Mass Transfer Conference, IGCAR, Kalpakkam, India, 2004.
  40. Dieter Gorenflo, Danger E., Andrea Luke, Stephan K., Chandra U., Ranganayakulu C., Bubble Formation with Pool Boiling on Tubes with or Without Basic Surface Modification for Enhancement, Proceedings of V Int. Conference of Boiling Heat Transfer, Jamaica, 2003.
  41. Ranganayakulu C., Panigrahi A., Influence of Header Design on Pressure Drop and Thermal Performance of a Compact Heat Exchanger, Proceedings of III International Conference on Compact Heat Exchanger for Process Industries, Davos, Switzerland, 251-258, 2001.
  42. Ranganayakulu C., Murthy T. S. R., Koushik P. S., On Flow Control of Kerosene based Inflammable Fluids at High Temperature, Proceedings of International Conference on Fluid Flows, Palghat, India, 2000.
  43. Ranganayakulu C., Seetharamu K. N., The Combined Effects of Wall Longitudinal Heat Conduction and Inlet and Fluid Flow Non-uniformity on Thermal Performance of Cross Flow Tube-Fin Heat Exchanger- a Finite Element Method, Proceedings of I International Conference on Compact Heat Exchangers for Process Industries, Snowbird, USA, 425-437, 1997.
  44. Ranganayakulu C., Seetharamu K. N., Sreevatsan K. V., The Performance Evaluation of Cross Flow Tube-Fin Heat Exchanger Considering the Effects of Inlet Flow Non-uniformity and Temperature Non-uniformity using a Finite Element Method, Proceedings of 9th International Confereence on Numerical Methods in Thermal Problems, Atlanta, USA, IX, 1010-1021, 1995.
  45. Ranganayakulu C., Seetharamu K. N., Sreevatsan K. V., The Performance Evaluation of Cross Flow Tube-Fin Heat Exchanger Considering the Combined Effects of Inlet Flow Non-uniformity and Temperature Non-uniformity using a Finite Element Method, Proceedings of XIII National Heat and Mass Transfer & III ISHMT-ASME Heat and Mass Transfer Conference, REC, Surathkal, India, 713-718, 1995.
  46. Ranganayakulu C., Seetharamu K. N., Sreevatsan K. V., The Effect of Longitudinal Heat Conduction in Cross Flow Compact Heat Exchanger, Proceedings of XI National Heat and Mass Transfer & I ISHMT-ASME Heat and Mass Transfer Conference, IIT Madras, India, 57-62, 1991.

National Level

  1. Ranganayakulu C., Development of Environmental Control Systems and Compact Heat Exchangers for Aerospace Application, INAE e-annals, 2016.
  2. Ranganayakulu C.,G. BhavaniSankar, “ Emerging Trends in Aircraft Environmental Control System” National conference on Emerging Trends in Mechanical Engineering (e-TIME’16), 24th Aug 2016, JNTUACE, Anathapuram, India
  3. Ranganayakulu C.,Design and Development of Compact Heat Exchangers for Aerospace Applications, National workshop on Heat Exchangers, 23-24 December, 2014, PESIT, Bangalore.
  4. K V Ramana Murthy, J N Raghu, C. Ranganayakulu, T P Ashok Babu, Generation of Heat Transfer Coefficient and Friction Factor Correlations for Lance & Offset Fins of a Compact Heat Exchanger for water using CFD Analysis, 16th Annual CFD Symposium, Bangalore, CP26, pp 107-111, August 11-12, 2014.
  5. Ranganayakulu C.,Generation of Colburn ‘j’ factor and friction ‘f’ factors for Compact Heat Exchanger fins , Symposium on Micro and Nano Scale Heat Transfer & its Applications,26-27 December, 2013, PESIT, Bangalore.
  6. K V Ramana Murthy, Ranganayakulu C, CFD Analysis of Flow Distribution in Compact Plate Fin Heat Exchanger Header Using Baffle Plate, 14th annual CFD Symposium, August 10-12, 2012.
  7. Ranganayakulu C., L. Sheik Ismail, CFD Analysis of Compact Plate Fin Heat Exchangers, Presented in National Workshop on CFD2K9, held at MVJ College of Engineering, Bangalore, 6th May 2009.
  8. Srinivasula Reddy Pilli, Sheik Ismail, C. Ranganayakulu, V. Vasudeva Rao, Heat Transfer and Flow friction correlations for Compact wavy plate fin heat Exchangers, 19th National 8th ISHMT ASME HMT Conference, Hyderabad, 2008
  9. Ranganayakulu C., L.Sheik Ismail, K.N. Seetharamu, Numerical and Experimental Studies on Compact Plate-Fin Heat Exchangers for Aerospace Applications, Proceedings of 35th National conference on Fluid Mechanics and Fluid Power, PESIT, Bangalore, December 2008.
  10. Ranganayakulu C., Ismail L. S., Vasudeva Rao V., Rajeshwar S., Ramu M., Optimization of Compact Plate-Fin Heat Exchanger – a CFD Approach, Proceedings of Technological Advancements in Mechanical Engineering, Sreenidhi Institute of Science and Technology, Hyderabad, India, 2006.
  11. Ranganayakulu C., Ismail L. S., Vasudeva Rao V., Rajeshwar S., Ramu M., Effects of flow maldistribution in a compact plate fin heat exchanger for Aerospace applications – a CFD approach, Proceedings of 17th International Symposium on Transport Phenomena, Sreenidhi Institute of Science and Technology, Hyderabad, India, 2006.
  12. Ranganayakulu C., Ismail L. S., Vasudeva Rao V., Optimization of Compact Plate-Fin Heat Exchanger Performance – a case study through CFD, Proceedings of National Workshop on Computational Fluid Dynamics, Sreenidhi Institute of Science and Technology, Hyderabad, India, 8-10 March 2006.
  13. Ranganayakulu C., Subramanyam P. S., Strategic Initiatives in Aircraft Mechanisms, Proceedings of Workshop on Aerospace Mechanisms at Indian National Society for Aerospace and Related Mechanisms, Hyderabad, India, 2005.
  14. Ranganayakulu C., Mechanical and Avionics Systems of Light Combat Aircraft, National Indigenization workshop, presented at Maintenance Command, Indian Air Force, Nagpur, India, 28-30 November 2005.
  15. Ranganayakulu C., Compact Heat Exchangers for Aerospace Applications, Proceedings of Work shop on Heat Exchangers – Design and Optimization, IIT Delhi, India, 2004.
  16. Ranganayakulu C., Panigrahi A., Influence of Header Design on Pressure Drop and Thermal Performance of a Compact Heat Exchanger, Proceedings of 3rd National Conference on Thermal Systems held at Banaras Hind University, Varanasi, India, 178-184, 2001.
  17. Ranganayakulu C., Srinatha H. R., Verma M. B., Environmental Control System (ECS) Testing-LCA, Proceedings on Advances in Testing of Aerospace Structures and Systems, Hindustan Aeronautics Limited, Bangalore, India, 2000.
  18. Ranganayakulu C., Seetharamu K. N., Sreevatsan K. V., The Performance Evaluation of Cross Flow, Counter Flow and Parallel Flow Compact Plate Fin Heat Exchangers with Longitudinal Heat Conduction, Flow Maldistribution and Fluid Property Variation Effects using Finite Element Method, Proceedings of Advanced Study Institute on Computational Methods in Engineering Analysis, IIT Madras, India, 1993.1.        Amit Hedge Sanjay and Chennu Ranganayakulu, CFD Analysis of a Precooler for Hypersonic Propulsion, presented in 16th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics (HEFAT-ATE), held online, Amsterdam, Netherlands, ID No. 157, August 8-10, 2022.
  19. C. Rangagayakulu, Complete life cycle of design and development of Compact Plate-Fin Heat Exchangers for Aerospace Applications, 3rd International work shop on Compact Heat Exchangers, 2-3 Jan. 2020, Dayananda Sagar University, Bangalore.

Conferences & Publications

Conferences/Seminar/Workshop:

  •  Nanocrystalline Mn-doped Ba0.98Sr0.02SnO3 solid solution: Exploring challenges in the study of microstructure and optical properties, Nehal A Waghchoure (presenter), K.P. Jayadevan (ii) Computational study of electronic density of states of interstitial carbon-doped BaSnO3 perovskite, K. P. Jayadevan (presenter) in the International Conference on Functional Materials (ICFM2024: January 9-11), IIT, Kharagpur.
  • Participated as Reviewer of Abstracts for the International Conference on WILP (ICONWIL2024: organized by BITS-Hyderabad, April 2024).
  • Participated as an Instructor and delivered a lecture on the topic ‘BET Surface area analysis’ in STUTI (Synergistic Training Program Utilizing Scientific and Technological Infrastructure (supported by DST and Shivaji University, Kolhapur) and held at BITS-Pilani, K. K. Birla Goa campus during the week: September 26 to October 2, 2022.
  • Presented a talk entitled ‘Microstructural Characteristics of Boron doped TiO2 Nanocrystals’, International Conference on Advanced Materials, 2019 (ICAM2019), Nirmalagiri College, Kannur, Kerala.
  • Presented an Abstract entitled ‘Computational Study of trends in the Solvation Energy and Donor-Acceptor interactions of Benzoxaborole-based Neutral molecules’ as a talk in National Symposium on Convergence of Chemistry and Materials (CCM2017), Dec.21-22, 2017, BITS-PILANI, Hyderabad.
  • Attendee in a Regional workshop on outcome based learning using pedagogy framework (BITS-Pilani, K. K. Birla Goa Campus and IIT Kharagpur: Feb.10-11,2017).
  • Attended 13th Eurasia Conference on Chemical Sciences held at IISc, Bangalore (Dec. 14-18, 2014) and presented a Poster entitled: ‘Iron-Borate Coordination Complex-A Density Functional Theory Approach’.
  • Invited Seminar in UGC sponsored National Seminar on Nanomaterials: Synthesis, Characterisation and Application held on February 2-3 2012 in Chowgule College, Margao, Goa. Title: ‘Resistive switching in Binary Transition Metal Oxides’.
  • Conference Proceedings/Abstracts:
  • (1) Microstructural Characteristics of boron doped TiO2 Nanocrystals, K. P. Jayadevan(presenter) and Shubhada S. Kerkar. AIP Conference Proceedings 2162, 020011, (2019) 020011-1-5. (2) Computational Study of trends in the Solvation Energy and Donor-Acceptor interactions of Benzoxaborole-based Neutral molecules, K. P. Jayadevan (presenter), National Symposium on Convergence of Chemistry and Materials (CCM2017), Abstract No. IL-11, Dec.21-22, 2017, BITS-PILANI, Hyderabad. (3) Preparation and Characterization of Ag-(Ba,Sr)TiO3 Composite Thin Films, K. P. Jayadevan and T. Y. Tseng (Presenter), Abstracts of Proceedings of 3rd Asian Meeting on  Electroceramics (AMEC),   IUMRS-ICA Singapore, (2003), 200. (4) K. P. Jayadevan and T. Y. Tseng (Presenter), Composite and Multilayered Ferroelectric Films: Processing and  Properties,Abstracts of Proceedings of International Conference on Composites and Engineering, Spain (ICCE/8), (2001), 397-398.
  •  Journal Articles:

    (1) Review: One-dimensional ZnO Nanostructures, K. P. Jayadevan and T. Y. Tseng, J. Nanosci. Nanotech., 12, (2012), 4409-4457. (2) Review: One-dimensional Semiconductor Nanostructures as Absorber Layers in Solar Cells, K. P. Jayadevan and T. Y. Tseng, J. Nanosci. Nanotech., 5, (2005), 1-17. (3) Surface Chemical and Leakage Current Density Characteristics   of Nanocrystalline Ag- Ba0.5Sr0.5TiO3 Thin Films, K. P. Jayadevan, C. Y. Liu, and T. Y. Tseng, Am. Ceram. Soc., 88, (2005), 2456-2460. (4) Dielectric Characteristics of Nanocrystalline Ag-Ba0.5Sr0.5TiO3 Composite Thin Films,K. P. Jayadevan, C. Y. Liu, and T. Y. Tseng, Appl. Phys. Lett., 85, (2004), 1211-1213. (5) Review: Composite and Multilayer Ferroelectric Films:   Processing, Properties and Applications, K. P. Jayadevan and T. Y. Tseng, J. Mater. Sci.: Materials in Electronics, 13, (2002), 439-459. (6) Use of Metastable, Dissociated and Charged Gas Species in  Synthesis:    A Low- Pressure Analogue of the High-Pressure Technique, K. P. Jayadevan, N. V. Kumar, R. M. Mallya and K. T. Jacob, J. Mater. Sci., 35, (2000), 2429-2434. (7) Nanocrystalline MgAl2O4: Measurement of Thermodynamic Properties   Using  a Solid State Cell,K. T. Jacob, K. P. Jayadevan, R. M. Mallya and Y. Waseda, Adv. Mater., 12, (2000), 440-444. (8) Trends in the Stability of Ternary Oxides: Systems M-Pb-O (M =   Ca, Sr, Ba), K. P. Jayadevan and K. T. Jacob, High Temp. Mater. Process., 19, (2000), 399-407. (9) Stability of Cu2Ln2O5 Compounds - Comparison, Assessment and    Systematics, K. P. Jayadevan and K. T. Jacob, High Temp. Mater. Process., 19, (2000), 389-397. (10) Phase Relations in the System Cu-Eu-O and Thermodynamic Properties of  CuEu2O4 and CuEuO2, K. T. Jacob and K. P. Jayadevan, Phase Equilibria and Diffusion, 25, (2004), 125-133. (11) Phase Relations in the System Cu-La-O and Thermodynamic Properties of CuLaO2 and CuLa2O4, K. T. Jacob and K. P. Jayadevan, J. Mater. Sci., 37 (2002), 1611-1620. (12)Tie-lines and Mixing Properties of Solid Solutions in the System CaO-SrO-PbO-O at 1100 K, K. T. Jacob and K. P. Jayadevan, Phase Equilibria and Diffusion, 21, (2000), 350-356. (13) System Sr-Pb-O: Phase Equilibria and Thermodynamics Using   Solid- State  Cells with Buffer Electrodes, K. T. Jacob and K. P. Jayadevan, Chem. Mater., 12, (2000), 1779-1786. (14) Electrochemical Determination of the Gibbs Energy of Formation of MgAl2O4, K. T. Jacob, K. P. Jayadevan and Y. Waseda, J. Am. Ceram. Soc., 81, (1998), 209-212. (15) Phase Relations, Chemical Potentials and Thermodynamic  Properties of   Interoxide Compounds in the System Ba-Pb-O, K. T. Jacob and K. P. Jayadevan, Mater. Sci. Eng B., 52, (1998), 134-144. (16) System Bi-Sr-O: Synergestic Measurements of Thermodynamic Properties Using Oxide and Fluoride Solid Electrolytes, K. T. Jacob and K. P. Jayadevan, J. Mater. Res., 13, (1998), 1905-1918. (17) Measurement of Gibbs Energy of Formation of Ca2PbO4 Using a Solid State Cell with Three Electrodes, K. T. Jacob and K. P. Jayadevan, J. Mater. Chem., 7, (1997), 2407-2413. (18) Combined Use of Oxide and Fluoride Solid Electrolytes for the Measurement of Gibbs Energy of Formation of Ternary Oxides: System Bi-Ca-O, K. T. Jacob and K. P. Jayadevan, Materials Transactions, (Japan Institute of Metals), 38, (1997) 427-436. (19) Preparation and Dielectric Properties of Zinc and Cadmium Doped Barium Tantalates, Ba3Zn1-xCdxTa2O9, A. K. Ganguli, K. P. Jayadevan, G. N. Subbanna, and K. B. R. Varma, Solid State Comm., 94, (1995), 13-16. (20) Thermal Expansion Studies of Substituted CTP Derivatives, A. K. Ganguli and K. P. Jayadevan, Bull. Mater. Sci., 18, (1995), 883-887.

  • Reference: Jayadevan.K.P.

    Email: jayadev@goa.bits-pilani.ac.in

     

     


Click the link below for the full list


Publications

Book Chapters
 
Chapters published after joining BITS Goa
 
2) Chapter 12: Microsupercapacitors for Miniaturized Electronic Device Applications (2023)
Gaonkar, A. D.; Paniya, S.; Kiran V.*  Miniaturized Electrochemical Devices: Advanced Concepts, Fabrication, and Applications, CRC press. Taylor & Francis, ISBN 9781032392714 (in press).
 
1) Chapter 12: Photo- and Electrochemical Generation of Hydrogen Peroxide for Advanced Oxidation Processes (2022)
Raikar,L. G.; Paniya, S.; Prakash, H.; Subramanian, G.; Kiran, V.* Photo- and Electrochemical Water Treatment: For the Removal of Contaminants of Emerging Concern by RSC, ISBN: 978-1-83916-501-6. (DOI: 10.1039/9781839167355-00317)
 
Publications
 
Publications after joining BITS Goa

 

31. Enhanced H2 production assisted by anodic iodide oxidation using transparent tin oxide-based electrodes.

Paniya, S.;  Kiran, V. Chem. Commun., 202460, 7208-7211.

30. Iodide-assisted energy-saving hydrogen production using self-supported sulfate ion-modified NiFe(oxy)hydroxide nanosheets.

Paniya, S.; Gaonkar, A. D.; Kiran, V. Chem. Commun., 202460, 4174-4177.

Thangamuthu, M.;# Kiran V.;# Xiong, L.; Conroy, S.; Zhang, X.; Tang, J. ACS Catal., 202313, 9113. (#equal contribution)
Krishnaveni,V.; DMello,M. E.; Sahoo,P.; Thokala, N.; Bakuru, V. R.; Kiran V.; Basavaiah, K.; Kalidindi, S. B. ACS Appl. Nano Mater., 2023, 6, 10960-10966.

26) Exfoliated Redox Active Imide Covalent-Organic Framework for Metal Free Hydrogen Gas Sensing

Thokala, N.; Kiran V.;, Gaonkar, A. D.; Periyasamy, G.; Fazl-UrRahman, K.; Valle, K.; DMello, M. E.; Basavaiah, K.; Kalidindi, S. B. Sens. Diagn.2023, 2, 1176-1180.
Graphical abstract: An exfoliated redox active imide covalent organic framework for metal free hydrogen gas sensing

List of Publications:

Peer-Review Journals:

  1. Neha Parmar, Aviraj Jadhav, Runa Kumari, D. Ratan Sanjay, Harish V. Dixit, and Lalit Kumar, “A TM01to TE11 Mode Converter Based on Step Waveguide Discontinuities for High Power Microwave Sources”, IEEE Transaction on Electron Devices, July 2024.
    (SCI indexed) IF=2.9   DOI: 1109/TED.2024.3421931
  2. P Priyalatha, L. Ramayee, Runa Kumari, and K. Supradeepan, “Multi-objective optimization of a compact wideband antenna using grey relational analysis”, AEU International Journal of Electronics and Communications (Elsevier), Feb 2024, (SCI indexedIF=3.169
  3. P Priyalatha, Runa Kumari, and Sourav Nandi, “A Three-way Fan-shaped Power Divider as a Feed-network of Aperture-coupled Antenna Arrays”, Microwave Opt Technol Lett. (MOTL, Wiley), June 2023, (SCI indexedIF=1.392
  4. Sarath Sankar Vinnakota, Runa Kumari, and Basudev Majumder, “Metasurface Assisted Broadband Compact Dual Polarized Dipole Antenna for RF Energy Harvesting”, IEEE Antenna and Wireless Propagation Letter, April 2023.
    https://ieeexplore.ieee.org/document/10106408 (SCI indexed) IF=3.834
  5. P Priyalatha, Runa Kumari, and Sourav Nandi, “Compact modified hourglass shaped aperture coupled antenna for radar applications”, International Journal of Microwave and Wireless Technologies (Cambridge University Press), February 2023. (SCI indexed) IF=1.06
  6. R Venkata Sravya, Sarath Sankar Vinnakota, and Runa Kumari, “Patch Antenna with Multi-cell EBG for RF Energy Harvesting Applications”, International Journal of Microwave and Wireless Technologies (Cambridge University Press), August 2022. https://www.doi.org/10.1017/S1759078722000885. . (SCI indexed) IF=1.06
  7. Sarath Sankar Vinnakota, Runa Kumari, Basudev Majumder, and Qammer H. Abbasi, “Numerical Demonstration of a Dispersion Engineered Metallic Metasurface Assisted mm-wave Wireless Sensor”, Optics Continuum, Vol.1, No. 8, Aug 2022, pp 1795-1810.
  8. Rajasekhar Nalanagula, Naresh K. Darimireddy, Runa Kumari, and Chan-Wang Park, “Dual Circularly Polarized Semi-Cylindrical Hybrid Dielectric Resonator Antenna for X and Ku-Band Applications”, International Journal of RF and Microwave Computer-Aided Engineering (Wiley), June https://doi.org/10.1002/mmce.23279. (SCI indexedIF=1.694
  9. Rajasekhar Nalanagula, Naresh K. Darimireddy, Runa Kumari, Chan-Wang Park, and R. Ramana Reddy, “Circularly Polarized Hybrid Dielectric Resonator Antennas:A Brief Review and Perspective Analysis”, MDPI Sensors, June 2021, 21, 4100. 
  10. Sarath Sankar Vinnakota, Runa Kumari, Himanshu Meena, and Basudev Majumder,  “ Rectifier Integrated Multibeam Luneburg Lens Employing Artificial Dielectric as a Wireless Power Transfer Medium at mm wave band ”, IEEE Photonics Journal, June 2021, Vol. 13, Issue 3.  (SCI indexed)
  11. R Venkata Sravya, and Runa Kumari, “Gain and Isolation Enhancement of Patch Antenna using L-slotted Mushroom EBG”, International Journal of RF and Microwave Computer-Aided Engineering (Wiley), Aug 2020. http://dx.doi.org/10.1002/mmce.22369 (SCI indexedIF=1.694
  12. Sandeep Kumar, and Runa Kumari, “Composite right/left-handed ultra-wideband metamaterial antenna with improved gain”, Microwave Opt Technol Lett. (MOTL, Wiley), July 2020, https://doi.org/10.1002/mop.32552. (SCI indexedIF=1.78
  13. Sandeep Kumar, and Runa Kumari, “Bandwidth and Gain-Enhanced Composite Right/Left-Handed Antenna for Ultra-Wideband Applications”, International Journal of RF and Microwave Computer-Aided Engineering (Wiley), December 2019. DOI: 10.1002/mmce.22095 (SCI indexedIF=1.694
  14. Vinnakota Sarath Sankar, Runa Kumari, and Basudev Majumder, “Dual Polarized High Gain Resonant Cavity Antenna for RF Energy Harvesting”, International Journal of RF and Microwave Computer-Aided Engineering (Wiley), October 2019. DOI:1002/mmce.22003(SCI indexedIF=1.694
  15. Sandeep Kumar, and Runa Kumari, “Bandwidth Enhanced CPW-Fed CRLH Antenna Loaded with Resonating Rings”, IET Microwave, Antennas and Propagation, June 2019, 13, Issue 12. (SCI indexedIF=2.016
  16. Sandeep Kumar, and Runa Kumari, “Composite Right/Left-Handed Wideband Metamaterial Antenna Loaded with SRRs and CSRRs to Improve Gain and Efficiency”, IET Microwave, Antennas and Propagation, March 2019, 13, Issue 9. DOI:  10.1049/iet-map.2018.6106. (SCI indexed)  IF=2.016
  17. Runa Kumari and Santanu Kumar Behera, “Capacitive coupled Frequency Independent Dielectric Resonator Antenna Array for X-band Applications”, IETE Journal of Research(TIJR), Taylor & Francis, March 2019. DOI:   https://doi.org/10.1080/03772063.2019.1600438 . (SCI indexedIF=0.829
  18. Runa Kumari and Santanu Kumar Behera, “Investigation on Log Periodic Dielectric Resonator Antenna Array for Ku band Applications”, Electromagnetics, Taylor & Francis, 34, Issue 1, 2014, pp. 19-33. (SCI indexedIF=0.789
  19. Runa Kumari and Santanu Kumar Behera, “Wideband Log Periodic Dielectric Resonator Array with Overlaid Microstrip Feed Line”, IET Microwave, Antennas and Propagation, 7, Issue 7, 2013, pp 582-587. IF=2.016
  20. Runa Kumari and Santanu Kumar Behera, “Mushroom Shaped Dielectric Resonator Antenna for WiMAX Applications”, Microwave Opt Technol Lett. (MOTL, Wiley), 55, Issue. 6, Jun 2013, pp 1360-1365. IF=1.78
  21. Runa Kumari and Santanu Kumar Behera, “Nine Element Frequency independent Dielectric Resonator Array for X- band Applications”, Microwave Opt Technol Lett. (MOTL, Wiley), 55, No. 2, Feb 2013, pp 400-403. IF=1.78
  22. Runa Kumari and Santanu Kumar Behera, “Miniaturized Dual band Dielectric Resonator Antenna for IEEE 802.16d Fixed WiMAX Applications”, International Journal of RF and Microwave Computer-Aided Engineering (Wiley), 22, Issue 6, Nov 2012, pp 682-689. IF=1.694
  23. Runa Kumari and Santanu Kumar Behera, “A Compact Multi Band Triangular shaped Dielectric Resonator Antenna Array with Slotted Ground Plane”, International Journal of Advanced Computer Engineering and Architecture (Mind reader IJACEA), 2, No. 2, Jun 2012, pp 171-178.
  24. Runa Kumari and Santanu Kumar Behera, “Log Periodic Dielectric Resonator Antenna for Broadband Applications”, International Journal of Computer Applications (IJCA), ISBN 978-93-80864-71-10, No-7, 2011, pp 16-20.
  25. Runa Kumari and Santanu Kumar Behera, “Design of Log Periodic Dielectric Resonator Array for NATO-K band Applications”, International Journal of Signal and Imaging Systems Engineering, 7, No. 4, 2014, pp 265-272.

 

Peer-Review Conferences:

 

  1. Neha Parmar, Narain Shriraam M S, D Ratan Sanjay, Runa Kumari, Harish V. Dixit, “A Mode Converting Antenna Based on Step Waveguide Discontinuities for High Power Microwave Applications”, IEEE Space Aerospace and defenCE, (SPACE) 2024, Bangalore, India, 22 -23 July, 2024.
  2. Anamay Marathe, Rohith Shreebhashyam, and Runa Kumari, “Latency Analysis of CRC Codes and Linear Block  Codes”, IEEE Sixth International Conference on Electrical, Computer and Communication Technologies (IEEE ICECCT 2024), Durg, Chhattisgarh, India, 26- 28 June, 2024.
  3. Nalanagula Rajasekhar, Runa Kumari, and Naresh K. Darimireddy, “A Circularly Polarized Metasurface based Dielectric Resonator Antenna for Wireless Communication”, IEEE Wireless, Antenna and Microwave Symposium, WAMS-2024, Visakhapatnam, India, 29 Feb- 01 March. 2024.
  1. Tanay Reddy Gangavarama , Sudhanshu Patil, Runa Kumari, and D Purnima, “Biomass Based Substrate for Microstrip Antenna Application”, Polymer Processing Society Asia-Australasia Regional Conference (PPS-2023), Kovalam, Kerala, India, 29th Nov-2nd Dec 2023.
  2. Runa Kumari, D Purnima, and Asit Kumar Panda, “Biomass Substrate Based Conformal Microstrip Antenna for UAV Applications”, National Seminar on Electronic Devices Circuits and Systems, NSEDCS-2023, Berhampur , Odisha, 23-24, Sept 2023.
  3. M S Narain Shriraam, Jeevan Reji, and Runa Kumari, “Conformal Patch Antenna for Spacecraft Applications”, IEEE 4th International Conference on Communication, Circuits and Systems  (iC3S-2023), Bhubaneswar, India, 26-28 May. 2023.
  4. Priyalatha, Pratyush Choudhary, and Runa Kumari, “Ultra-Wideband Edge Trimmed Bowtie Antenna for X-Band Radar Communication”, 2023 IEEE 13th Annual Computing and Communication Workshop and Conference (CCWC 2023), The University of Nevada, Las Vegas (UNLV Science & Engineering Building), 8-11 March. 2023.
  5. Nalanagula Rajasekhar, Naresh K. Darimireddy, Runa Kumari, and Abdellah Chehri, “A Hybrid Dielectric Resonator Antenna with Dual Sense Circular Polarization for Wireless LAN Applications”, International scientific symposium for research in the fields of Human Centre Intelligent Systems, KES-HCIS-2022, Rhodes, Greece, 20-22, June 2022 (Web of Science & Scopus Indexed).
  6. Varun Sai Bonam, Satya Surya Vinay Kota, Runa Kumari, and Sandeep Kumar, “Designing Hexagon, Triangle, Circle shaped microstrip Patch Antennas using Coconut Coir Substrate”, IEEE International Conference on Intelligent Technologies, CONIT 2022, L. E. Institute of Technology, Hubballi, Karnataka, India, 24th-26th, June 2022­­­­­­.
  7. Satya Surya Vinay Kota, Varun Sai Bonam, Sandeep Kumar, and Runa Kumari, “Microstrip Patch Antenna Using Coconut Coir Substrate and its Comparison with FR4 Based Antenna”, IEEE International Conference on Intelligent Technologies, CONIT 2022, K. L. E. Institute of Technology, Hubballi, Karnataka, India, 24th-26th, June 2022­­­­­­.
  1. Priyalatha, and Runa Kumari, “Low insertion loss compact quadrature coupler for conformal space applications”, 2021 IEEE International Conference on Advances in Electrical, Computing, Communications and Sustainable Technologies (ICAECT 2021), Bhilai, India, 19-20 Feb. 2021.
  2. R Venkata Sravya, and Runa Kumari, “Gain Enhancement of Dual-Band Triangular Patch with Hexagonal Mushroom EBG”, URSI Regional Conference on Radio Science (URSI-RCRS 2020), IIT (BHU) Varanasi, India, 12-14 Feb. 2020.
  3. RajaSekhar, R. Ramana Reddy, Runa Kumari, and R. Sowjanya, “Performance Analysis of Conical Dielectric Resonator Antenna with Various Feeding Techniques”, IEEE Indian Conference on Antennas & Propagation (InCAP-2019), Ahmedabad, India, 19-22 Dec. 2019.

 

  1. R Venkata Sravya, Runa Kumari, and Balamati Choudhury, “Gain Enhancement of Annular Ring Patch using Cascaded EBG”, IEEE MTT-S International Microwave Workshop Series on Advanced Materials and Processes, IMWS-AMP 2019, Ruhr University Bochum, Bochum, Germany, 16-18 Jul. 2019.
  2. Deepesh Chandwani, M. Chaitanya Sai and Runa Kumari, “Microstrip Patch Antenna Array for RFID Applications”, 3rdInternational Conference on Electronics and Communication and Aerospace Technology (ICECA 2019), Coimbatore, India, 12-14 Jun 2019.
  3. V R Dinesh Kumar and Runa Kumari, “Meandering Slot Patch Antenna for UAV Applications”, IEEE International Conference on Microwave Integrated Circuits, Photonics and Wireless Networks (IMICPW-2019), NIT Tiruchirappalli, India, 22-24 May 2019.
  4. Hariharasudhan K and Runa Kumari, “Metasurface Loaded Patch Antenna for Wi-Fi Applications”, IEEE International Conference on Microwave Integrated Circuits, Photonics and Wireless Networks (IMICPW-2019), NIT Tiruchirappalli, India, 22-24 May 2019.
  5. Pradeep Singh and Runa Kumari, “Monopole Patch Antenna for C band Application”, IEEE International Conference on Microwave Integrated Circuits, Photonics and Wireless Networks (IMICPW-2019), NIT Tiruchirappalli, India, 22-24 May 2019.
  6. Pradeep Singh, Kota SivaRamaKrishna Chaitanya, and Runa Kumari, “Microstrip Patch Antenna for application in Intelligent Transport Systems”, IEEE International Conference on Microwave Integrated Circuits, Photonics and Wireless Networks (IMICPW-2019), NIT Tiruchirappalli, India, 22-24 May 2019.
  7. Vinnakota Sarath Sankar, Basudev Majumder, and Runa Kumari, “Suspended Metasurface Loaded Dual Band Dual Polarized Dipole Antenna Array with Polarization Flexibility for RF Energy Harvesting”, URSI Asia Pacific Radio Science Conference (AP-RASC 2019), New Delhi, India, 9-15 Mar. 2019.
  8. Vinnakota Sarath Sankar, Runa Kumari, and Balamati Choudhury, “Metamaterial inspired Rectenna loaded with a DR for RF Energy Harvesting”, IEEE Indian Conference on Antennas & Propagation (InCAP-2018), Hyderabad, India, 16-19 Dec. 2018.
  9. Vinnakota Sarath Sankar, Basudev Majumder, and Runa Kumari, “Dual Polarized High Gain Aperture coupled Antenna for RF Energy Harvesting”, IEEE INAE workshop on Electromagnetics, (IIWE-2018), Trivandrum, India, 6-8 2018.
  10. Runa Kumari, and Balamati Choudhury, “Metamaterial loaded Printed Antenna for Unmanned Aerial Vehicle Applications”, IEEE International Conference on Applied Electromagnetics, Signal Processing & Communication (AESPC-2018), Bhubaneswar, India, 22-24 Oct. 2018.
  11. R Venkata Sravya, and Runa Kumari, “Gain Enhancement of Patch Antenna Using L-slotted Mushroom EBG”, IEEE International Conference on Signal Processing And Communication Engineering Systems (SPACES-2018), Guntur, A. P., India, 4-6 Jan. 2018.
  12. Dusi Aditya, and Runa Kumari, “Frequency Reconfigurable Dielectric ResonatorAntenna for Wireless Applications”, IEEE International Conference on Antenna Innovations and Modern Technologies (iAIM-2017), Bangalore, India, 24-26 Nov. 2017.
  13. Sandeep Kumar, and Runa Kumari, “Bandwidth enhanced high efficiency compact CPW fed Metamaterial antenna based on ENG -TL structure”, International Conference on Computational and Experimental Engineering and Sciences (ICCES 2017), Madeira, Portugal, 26-30 Jun. 2017.
  14. Shashank Solomon, and Runa Kumari, “Aperture Coupled Cylindrical Element Log Periodic Dielectric Resonator Antenna array for X Band”, IEEE India International Conference INDICON- 2015, Jamia Millia Islamia New Delhi, India, 17-20 Dec. 2015.
  15. Shashank Solomon, and Runa Kumari, “Aperture Coupled Rectangular Element Log Periodic Dielectric Resonator Antenna array for X Band”, IEEE Applied Electromagnetics Conference, AEMC- 2015, IIT Guwahati, India, 18-21 Dec. 2015.
  16. Shashank Solomon, and Runa Kumari, “Slotted Dielectric Resonator Antenna for Broadband Applications”, IEEE Global Conference on Communication Technologies, GCCT- 2015, Kanyakumari, India, Apr 2015.
  17. Runa Kumari, S K Behera, and Satish K. Sharma, “Aperture Coupled Wideband Dielectric Resonator Antenna Array with Polarization Reconfiguration”, IEEE Applied Electromagnetics Conference, AEMC- 2013, Bhubaneswar, India, Dec 2013.
  18. Imran Khan, Runa Kumari and S. K. Behera, “A Notched Chamfered Rectangular Dielectric Resonator Antenna Array for Wireless Applications”, IEEE International Multi Conference on Automation, Computing, Control, Communication and Compressed Sensing ( iMac4s-2013), ISBN 978-1-4673-5088-4 Feb 2013, Kerala, India, Mar 2013.
  19. Imran Khan, Runa Kumari and S. K. Behera, “A Four Element Rectangular Dielectric Resonator Antenna Array For Wireless Applications”, IEEE International Conference on Emerging Trends in Computing, Communication and Nano-Technology (ICECCN-2013), ISBN 971-1-4673-5036-5 Feb 2013, Tirunelveli, Tamilnadu, India, Mar 2013.
  20. Runa Kumari, and S. K. Behera, “Mutual Coupling Reduction in C-shaped Dielectric Resonator Antenna array for MIMO Applications”, Annual IEEE India Conference (INDICON) 2012, ISBN 978-1-4673-2272-0, Cochin, India, Dec 2012.
  21. Runa Kumari, and S K Behera, “A Compact Dual Resonance Dielectric Resonator Antenna Array with partial ground plane”, IEEE International Conference on Recent Advances in Information Technology, RAIT- 2012, Dhanbad, India, Mar 2012.
  22. Sreenu Mudavath, Runa Kumari and S. K. Behera, “A Compact CPW fed Stacked Cylindrical Dielectric Resonator Antenna for WLAN Applications”, IEEE International Conference on Computing, Electronics and Electrical Technologies (ICCEET), 2012, ISBN 978-1-4673-0210-4, Nagercoil, Tamilnadu, India, Mar 2012.
  23. Runa Kumari, Kapil Parmar and S. K. Behera, “A Dual band Triangular shaped DRA Array for WLAN/WiMAX Applications”, Annual IEEE India Conference (INDICON), 2011, ISBN 978-1-4577-1110-7, Hyderabad, India, Dec 2011.
  24. Sreenu Mudavath, Runa Kumari and S. K. Behera, “A Compact CPW fed Dielectric Resonator Antenna for WLAN Applications”, Annual IEEE India Conference (INDICON), 2011, ISBN 978-1-4577-1110-7, Hyderabad, India, Dec 2011.
  25. Kapil Parmar, Runa Kumari and S. K. Behera, “Half Cylindrical Dielectric Resonator Antenna for Dual band Applications”, International Symposium on Devices MEMS Intelligent Systems and Communication (ISDMISC-2011), ISBN 978-93-80747-80-2, Sikkim, India, April 2011.
  26. Kapil Parmar, Runa Kumari and S. K. Behera, “M-Shaped Dielectric Resonator Antenna for WLAN Applications”, IEEE International Conference on Devices & Communications (ICDeCOM-2011), ISBN 978-1-4244-9190-2/11, Ranchi, India, Feb 2011.
  27. Runa Kumari, S. K. Behera and R. K. Mishra, “Log Periodic Dielectric Resonator Antenna for K and Ka-band Applications”, International Conference on Electronic Systems, ICES 2011, ISBN 978-93-80697-50-5, Rourkela, India, pp 264-267, Jan
  28. Mahender P, Runa Kumari and S. K. Behera, “Compact Dual Band Hemispherical Dielectric Resonator Antenna”, International Conference on Electronic Systems, ICES 2011, ISBN 978-93-80697-50-5, Rourkela, India, pp 252-254, Jan 2011.
  29. Runa Kumari, Kapil Parmar and S. K. Behera, “Conformal Patch Fed Stacked Triangular Dielectric Resonator Antenna for WLAN Applications”, IEEE International conference on Emerging Trends in Robotics and Communication Technologies, INTERACT-2010, ISBN 978-1-4244-9006-6/10, Chennei, India, pp 104-107, Dec 2010.
  30. Runa Kumari and S. K. Behera, “Ring Dielectric Resonator Antenna for Broadband Applications”, IEEE International Conference on Computational Intelligence and Communication Systems, CICN-2010, ISBN 978-0-7695-4254-6/10, Bhopal, India, pp 7-10, Nov 2010.

Peer-Review Book (as an editor):

 1. Runa Kumari and Balamati Choudhury, “Multiscale Modelling of Advanced Materials (Materials Horizons: From Nature to Nanomaterials)”, Springer; 1st ed. 2020.(as an editor).

Peer-Review Book Chapters:

  1. Nalanagula Rajasekhar, Runa Kumari, Naresh K. Darimireddy, and Abdellah Chehri, “A Hybrid Dielectric Resonator Antenna with Dual Sense Circular Polarization for Wireless LAN Applications”, Human Centred Intelligent Systems (Smart Innovation, Systems and Technologies, SIST, Volume 10), Springer nature, Chapter 13, pp 171-178, June
  2. Runa Kumari, Hariharasudhan K, and Sandeep Kumar, “Metasurface Antennas: book chapter in Handbook of Nano-Metamaterials , Springer nature Metamaterials handbook series,  Metamaterials Science and Technology book series (METSCTE, volume 1), 2021. (accepted, in Press). (https://link.springer.com/referenceworkentry/10.1007/978-981-13-0261-9_39-1)
  3. R Venkata Sravya and Runa Kumari, “Electromagnetic Bandgap Structures: Multiscale Modelling of Advanced Materials (Materials Horizons: From Nature to Nanomaterials)”, Springer; 1st ed. 2020.
  4. Sandeep Kumar and Runa Kumari, “Metamaterial Resonator Antennas: Multiscale Modelling of Advanced Materials (Materials Horizons: From Nature to Nanomaterials)”, Springer; 1st ed. 2020.

Publications

  1. Singh, S., Khare, A., Pandey, S. K., & Sharma, D. P. (2021). Industry and community peers as drivers of corporate social responsibility in India: The contingent role of institutional investors. Journal of Cleaner Production, 295, 126316. https://doi.org/10.1016/j.jclepro.2021.126316 [ABDC-A]
  2. Singh, S. & Guha, M. (2018). Experiential learning: analyzing success and failures in Indian telecom sector. Benchmarking: An International Journal, 25(9), 702-3719. https://doi.org/10.1108/BIJ-07-2017-0199 [ABDC-B]
  3. Singh, S., & Guha, M. (2019). Peer Effect on Corporate Social Responsibility: Investigating Moderating Role of Business Group Affiliation, State Ownership, and Firm Size. International Journal of Strategic Decision Sciences (IJSDS)10(3), 114-130. https://doi.org/10.4018/IJSDS.2019070107 [ABDC-B as per 2016 list]
  4. Singh, S., Sharma, A., & Nandi, S. (2019). Using transcendental phenomenology to explore the social jugaads of transacting money post demonetisation in India. International Journal of Indian Culture and Business Management, 18(4), 442-457. https://doi.org/10.1504/IJICBM.2019.100306 [ABDC-C as per 2016 list]
  5. Thirumalesh, M.A., Singh, S., Akram, Ul M., Chauhan, C., & Khan, S. (2021). Exploring Consumer Motivations for Adoption of Streaming Services. Asia Pacific Journal of Information Systems. [ABDC-C; Upcoming]
  6. TM, A., Ul Akram, M., Singh, S., & Agarwal, S. (2017). Is Low Cost Strategy in Airlines Sustainable?–A Comparative Financial Ratio Analysis of Low Cost Airline Companies in India. Contemporary Areas of Management and Finance by Dr. Amit Kumar Singh, Galgotia Publishing Company, (2017) [Book Chapter]

 

 

Publications

Links to journal publications and conference proceedings can be found here.
 
 

Publications

Journal articles 

  1.  Naim, M.F. & OzyilmazA. (2022, in press). Flourishing-at-work and Turnover Intentions: Does Trust in Management Moderate the Relationship?, Personnel Review, (n/a), (Impact factor (2020): 3.228, SSCI / ABDC-Rank A / ABS-2/  SCOPUS Indexed, , Emerald publishers) https://doi.org/10.1108/PR-09-2020-0715
  2.  Naim, M.F. (2022, in press). Revamping workplace learning and development during COVID-19 in HR consulting industry in India: A thematic analysis, International Journal of Knowledge and Learning, (n/a), (ABDC-Rank C, SCOPUS Indexed, Inderscience publishers).
  3.  Naim, M.F. (2021). What matters most for Indian Generation Y employees? An empirical study based on work values. Global Business and Organizational Excellence41(3), 55-68. (SCOPUS Indexed, Wiley Online publishers). https://doi.org/10.1002/joe.22134
  4.  Naim, M.F., Fatima, S., & Suhail, M. (2021). WINFORT Services: The way forward, Emerald Emerging Markets Case Studies11(1), 1-10. (Emerald publishers). https://doi.org/10.1108/EEMCS-08-2020-0300  ,
  5. Naim, M.F. (2021). Evolving face of workplace learning and development: a case of an Indian HR consulting firm,  Strategic HR Review20(1), 23-26 (SCOPUS Indexed, Emerald publishers).               https://doi.org/10.1108/SHR-08-2020-0073 
  6. Naim, M. F. & Lenka, U. (2020). Organizational learning and Gen Y employees’ affective commitment: the mediating role of competency development and moderating role of strategic leadership. Journal of Management & Organization, 26(5), 815-831. (Impact factor (2021): 3.64, SSCI / ABDC-Rank B / SCOPUS Indexed). https://doi.org/10.1017/jmo.2018.19
  7.  Naim, M. F. & Lenka, U. (2018). Development and retention of Generation Y employees: a conceptual framework, Employee relations:  The International Journal, 40(2), 433-455. (Impact factor (2021): 2.248, SSCI /    ABDC-Rank B / SCOPUS Indexed, Emerald publishers). https://doi/10.1108/ER-09-2016-0172/
  8. Naim, M. F. & Lenka, U. (2017). Linking knowledge sharing, competency development, and affective   commitment: Evidence from Indian Gen Y employees. Journal of knowledge Management, 21(4), 885-906.   (Impact    factor (2021):8.689, SSCI / ABDC-Rank A / SCOPUS Indexed, Emerald publishers).       https://doi.org/10.1108/JKM-08-2016-0334
  9. Naim, M. F. & Lenka, U. (2017). The impact of social media and collaboration on Gen Y employees' engagement, International Journal of development issues16(3), 289-299. (ABDC-Rank C / SCOPUS Indexed, Emerald publishers).  https://doi.org/10.1108/IJDI-04-2017-0041
  10. Naim, M. F. & Lenka, U. (2017). Talent management: a burgeoning strategic focus in Indian IT industry. Industrial and Commercial Training, 49(3), 183-188. (ESCI / SCOPUS Indexed, Emerald publishers). https://doi.org/10.1108/ICT-12-2016-0084
  11. Naim, M. F. & Lenka, U. (2017). How does mentoring contribute to Gen Y employees’ intention to stay? An Indian perspective, Europe’s Journal of Psychology13(2), 314–335. (ESCI / SCOPUS Indexed, APA PsycINFO publishers). https://doi.org/10.5964/ejop.v13i2.1304
  12. Naim, M. F. & Lenka, U. (2017). Investigating the Impact of Social Media on Gen Y Employees' Engagement: An Indian Perspective. International Journal of Human Capital and Information Technology Professionals8(3), 29-48. (ESCI / SCOPUS Indexed, IGI publishers). https://doi.org/10.4018/IJHCITP.2017070103
  13. Naim, M. F. & Lenka, U. (2017). Mentoring, social media, and Gen Y employees’ intention to stay: Towards a conceptual model. International Journal of Business System and Research11(1/2), 28-43. (SCOPUS Indexed, Inderscience publishers). https://doi.org/10.1504/IJBSR.2017.080832
  14. Yadav, M. & Naim, M. F. (2017). Searching for quality of work life: an Indian power sector perspective, Industrial and Commercial Training, 49(4), 164-174. (ESCI / SCOPUS Indexed, Emerald publishers). https://doi.org/10.1108/ICT-01-2017-0003
  15. Naim, M. F. & Lenka, U. (2016). Knowledge sharing as an intervention for Gen Y employees’ intention to stay, Industrial and Commercial Training, 48(3), 142-148. (ESCI / SCOPUS Indexed, Emerald publishers). https://doi.org/10.1108/ICT-01-2015-0011

Conference papers 

  1. Naim, M. F., & Peethambaran, M. (2022). Role of Mindfulness in workplace flourishing, in Proceedings of International Research Conference on Mindfulness (IRCM 2022), IIM Bodhgaya, (04-06 February, 2022)
  2. Naim, M. F., Peethambaran, M., & Srivastava, A. (2022). Do instrumental CSR initiatives alleviate employees’ stress in a VUCA world? Conceptualizing the role of employee wellness programs, in Proceedings of International e-Conference on Behavior Science in Management (CBSM 2022), SIBM Pune (28-29 January, 2022).
  1. Naim, M. F. (2021). Getting Ready for Gen Z: A Conceptual Analysis of Employee Engagement, in Proceedings of International Conference on Economics, Business, Tourism & Social Sciences, ICEBTS-2021, (virtual) Singapore, (30 January, 2021).
  2.  Naim, M. F. (2020). Interplay of resonant leadership and employee wellbeing in digital economy: Towards a conceptual modelIn Proceedings of International Conference of Sustainability and Equity Digital Society, (23-25 November, 2020).& Lenka, U
  3.  Naim, M. F. (2017). An exploration of the relationship between knowledge sharing and employee engagement of Gen Y employees. In Proceedings of 3rd Management Doctoral Colloquium IIT Kharagpur, Kharagpur. pp. 275-288, (08-09 February, 2017) (Excellent publishers).
  4.  Naim, M. F. & Lenka, U(2016). Mentoring as an innovative strategy to reduce Gen Y turnover: A conceptual analysis In Proceedings of ICIBK-2016, Ansal University, Gurgaon. pp. 275-288, (11-12 February, 2016) (Bloomsbury publishers).
  5.   **Naim, M. F. & Lenka, U. (2016). Mentoring as a driver of Gen Y employees’ engagement: Toward a conceptual model. In Proceedings of 14th HUSOC Conference, GRDS Publishing, Dubai. (22-23 February. 2016). **Received Young Researcher Award for this paper
  6. Naim, M. F. & Lenka, U. (2015). Workplace collaboration and Gen Y employees' engagement: A social media-based approach. In Proceedings of International Conference on Research and Business Sustainability (ICRBS). IIT Roorkee, Gretaer Noida. pp. 495-499, (4-6 December. 2015) (Excel publishers).
  7.  Naim, M. F. & Lenka, U. (2015). A conceptual model of retention of Gen Y employees. In Proceedings of International Conference on Evidence Based Management (ICEBM), BITS Pilani. pp. 483-490, (20-21 March 2015) (Excel publishers).
  8.  Naim M. F. & Lenka, U. (2014). Conceptualizing the role of social media in the retention of Gen Y employees. Presented at 14th Consortium of Students in Management Research (COSMAR-14), IISc Banagalore (21- 22 November, 2014).  

Book Chapters 

  1.  Naim, M. F. (2023, in press). Reinventing Workplace Learning and Development: Envisaging the Role of AI, In The Adoption and Effect of Artificial Intelligence on Human Resources Management, (n/a), Emerald, UK. 
  2. Naim, M. F. (2022). Managing Generation Z in Gig Economy: Toward an Integrative Framework of Talent Management. In Sustainability in the Gig Economy - Perspectives, Challenges and Opportunities in Industry 4.0, (293-303), Springer, USA.
  3. Naim, M. F. (2021). Responding to the challenge of Employee engagement during uncertain times: Adaptive leadership is the answer. In Global Perspectives on Change Management and Leadership in the Post-COVID-19 Era, (188-198),   IGI, USA.
  4. Naim, M. F. (2021). Exploring learning preferences of Gen Z employees: A conceptual analysis. In Applications of Work Integrated Learning Among Gen Z and Y Student, (1-14),   IGI, USA.
  5. Bulinska-Stangrecka, H. & Naim, M. F. (2021). Brace up for the next generation: Decoding the psychological contract expectations of Gen Z in the digital world. In Redefining the psychological contract in the digital era, (pp. 285-296), Springer, Switzerland.
  6. Naim, M. F. Bulinska-Stangrecka, H. (2019). Down the rabbit hole: Social media, workplace collaboration, Millennial psychological needs satisfaction, and affective commitment in 4.0 industry, In Thriving in digital workplace, (pp. 253-264), Springer, Switzerland.
  7. Naim, M. F. (2018). How Does Empowering Leadership Contribute to Organizational Commitment of Millennials?: An Indian Perspectivein Harnessing Human Capital Analytics for Competitive Advantage, (pp. 180-197), IGI, USA.
  8. Naim, M. F. (2018). Tap the Experienced to Care for the Inexperienced: Millennial Employees’ Retention Challenge? Mentoring is the Solution, in Psychology of Retention, (pp. 379-393), Springer, Switzerland.

Journal articles

  1. A. R. Singh, L. E. Perotti, R. F. Bruinsma, J. Rudnick, and W. S. Klug, “Ground state instabilities of protein shells are eliminated by buckling,” Soft matter, vol. 13, no. 44, pp. 8300–8308, 2017.
  2. A. R. Singh, A. Košmrlj, and R. Bruinsma, “Finite temperature phase behavior of viral capsids as oriented particle shells,” Physical review letters, vol. 124, no. 15, p. 158101, 2020.
  3. A. R. Singh, T. Leadbetter, and B. A. Camley, “Sensing the shape of a cell with reaction diffusion and energy minimization,” Proceedings of the National Academy of Sciences, vol. 119, no. 31, p. e2121302119, 2022.
  4. J. Little, A. J. Levine, A. R. Singh, and R. Bruinsma, “Finite-strain elasticity theory and liquid-liquid phase separation in compressible gels,” Physical Review E, vol. 107, no. 2, p. 024418, 2023.

Conferences

  1. A. R. Singh, L. Perotti, R. Bruinsma, J. Rudnick, and J. Eldredge, “Melting and structural transitions of interacting particle arrays on soft shells.,” in APS March Meeting Abstracts, vol. 2018, pp. C57–010, 2018.
  2. A. Singh and B. Camley, “Sensing cell shape at the micron scale with reaction-diffusion,” in APS March Meeting Abstracts, vol. 2021, pp. M12–005, 2021.

Book Chapter

  •  A. R. Singh, “Numerical methods for the isoperimetric problem on surfaces,” in Advances in Computational Modeling and Simulation, pp. 177–189, Springer Nature Singapore Singapore, 2022. p { line-height: 115%; margin-bottom: 0.1in; background: transparent }

Publications

Refereed International Journals:

  1. Tripathi, D. K., Chadha, S., & Tripathi, A. (2023). Metaheuristic enabled intelligent model for stock market prediction via integrating volatility spillover: India and its Asian and European counterparts. Data & Knowledge Engineering, 144, 102127 
  2. Seth, H., Chadha, S. and Sharma, S. (2021), "Benchmarking the efficiency model for working capital management: data envelopment analysis approach", International Journal of Productivity and Performance Management, Vol. 70 No. 7, pp. 1528-1560 
  3. Seth, H., Chadha, S., Sharma, S.K. and Ruparel, N. (2021), "Exploring predictors of working capital management efficiency and their influence on firm performance: an integrated DEA-SEM approach", Benchmarking: An International Journal, Vol. 28 No. 4, pp. 1120-1145.
  4. Seth, H., Chadha, S., Ruparel, N., Arora, P. and Sharma, S. (2020), "Assessing Working Capital Management Efficiency of Indian Manufacturing Exporters", Managerial Finance, Vol. 46 No. 8, pp. 1061-1079.
  5. Seth, H., Chadha, S. and Sharma, S. (2020), "Redesigning the efficiency process analysis for working capital models", Journal of Global Operations and Strategic Sourcing, Vol. 13 No. 1, pp. 38-55.
  6. Sharma, S., Chadha, S. and Seth, H. (2021), "Linking Social Disruption and Firm Performance", International Journal of Process Management and Benchmarking, Vol. 11 No. 2, pp. 200-219
  7. Chadha, S. and Seth, H. (2021), " Ownership Structure and Capital Structure: A Panel Data Study", International Journal of Business Innovation and Research, Vol. 24 No. 3, pp. 385-396.
  8. Chadha, S., & Sharma, S. K. (2019). Capital budgeting practices: a survey in the selected Indian manufacturing firms. International Journal of Indian Culture and Business Management, 18(4), 381-390.
  9. Sharma, S., Chadha, S., & Kautish, P. (2021). A Theoretical Framework of Socially Responsible Supply Chain for Future Research: From A Literature Study Perspective. International Journal of Procurement Management, Vol. 14 No. 1, pp. 30-61.
  10. Sharma, S., Chadha, S., & Dhar, S. (2018). Measuring the Impact of Socially Responsible Supply Chains on Firm Performance. Prabandhan: Indian Journal of Management, 11(10), 22-38.
  11. Chadha, S. and Dutta, N. (2020), "Linking Entrepreneurship, Innovation and Economic Growth: Evidence from GEM Countries", International Journal of Technoentrepreneurship Vol. 4, No. 1, pp. 22 – 31.
  12. Chadha S. & Sharma, A. K. (2016) "An empirical study on capital structure in Indian manufacturing sector" Global Business Review, Vol. 17, No. 2, pp. 411 – 424.
  13. Chadha S. & Sharma, A. K. (2015) "Determinants of capital structure: an empirical evaluation from India" Journal of Advances in Management Research, Vol. 12, No. 1, pp. 3 - 14.
  14. Chadha S. & Sharma, A. K. (2015) "Capital Structure and Firm Performance: Empirical Evidence from India" Vision - The Journal of Business Perspective, Vol. 19, No. 4, pp. 295 – 302.
  15. Goel U., Chadha S. & Sharma, A. K. (2015) " Operating liquidity and financial leverage: Evidences from Indian machinery industry" Procedia - Social and Behavioral Sciences, Vol. 189 (2015), pp. 344 - 350.

Refereed International Conference Papers:

  1. Chadha S (2019), “Capital Structure Theory Application: Empirical Evidence from Indian Manufacturers”, paper presented at The 1st Conference on applied economics and finance organized by Goa Institute of Management in December 16-18, 2019.
  2. Chadha S and Seth H (2019), “Quantifying Working Capital Management: An Empirical Analysis of Efficiency Model”, paper presented at TBM International Business Conference, organized by HCT Business School Dubai, UAE in March 18 – 19, 2019. 
  3. Seth H, Chadha S and Sharma S (2018), “Adjudicating the Working Capital Management Efficiency through Liquidity Model”, paper presented at First PAN IIT International Management Conference, organized by IIT Roorkee in November 30 – December 02, 2018.
  4. Chadha S (2018), “Capital Budgeting Techniques: Evidence from Indian Manufacturing Sector”, paper presented at NIDA International Business Conference 2018, Bangkok Thailand by NIDA Business School in March 3, 2018.
  5. Chadha S (2017), “Corporate Governance and Capital Structure: A Panel Data Study”, paper presented at International Conference on Research and Business Sustainability organized by IIT, Roorkee in December 16-17, 2017.
  6. Sharma S and Chadha S (2017), “Risk Adjusted Landed Cost Model in Supply Chain” at International Conference on Research and Business Sustainability organized by IIT, Roorkee in December 16-17, 2017.
  7. Singh R, Sharma S, Matai R and Chadha S (2017), “Measuring Effect of Supply Chain Design on Firm Performance Using Bayesian Networks” at GLOGIFT 2017, DTU Delhi.
  8. Chadha S. & Sharma A.K. (2015), "Does Ownership Structure affect Capital Structure: Evidence from India", paper presented at the International Conference on Advances in Management Technology organized by MNNIT, Allahabad in January 29-31, 2015.
  9. Chadha S. & Sharma, A. K. (2015) "Capital Structure Trends and Trade-off Vs. Pecking order Theory Applicability Test: Empirical Evidence from India" paper presented at the Global Conference on Managing in Recovering Markets being organized by Management Development Institute (MDI), Gurgaon, India, March 11-13, 2015.
  10. Goel U., Chadha S. & Sharma A.K. (2014) "Operating liquidity and financial leverage: evidences from Indian machinery industry", Paper presented in the XVIII Annual International Conference of the Society of Operations Management, Jointly organized by Department of Management Studies, IIT Roorkee & ABV IIITM Gwalior (India), published in Procedia (Elsevier), December 12-14, 2014. 

Publications

  1. Goel V, Kumar R, Bhattacharyya S , Tyagi VV, Abusorrah AM. A comprehensive parametric investigation of hemispherical cavities on thermal performance and flow - dynamics in the triangular - duct solar - assisted air - heater. Renew able Energy. 2021; Vol. 173, pp. 896 - 912. Impact Factor: 8.001 , Quartile: Q1 .
  2. Aghaei A, Bhattacharyya S , Dezfulizadeh A, Goldanlou AS, Rostami S, Sharifpur M. Heat transfer and fluid flow analysis using nanofluids in diamond - shaped cavitie s with novel obstacles. Engineering Applications of Computational Fluid Mechanics. 2021;15:1034 56. https://doi.org/10.1080/19942060.2021.1930170. Impact Factor: 8. 391 , Quartile: Q1 .
  3. Souayeh B, Bhattacharyya S , Hdhiri N, Hammami F. Numerical investigation on heat transfer augmentation in a triangular solar air heater tube fitted with angular - cut varied - length twisted tape. The European Physical Journal Plus . 2021; 136 (6), pp. 1 - 32 . Impact Factor: 3.911 , Quartile: Q1 .
  4. Kumar S, Kumar R, Goel V, Bhattacharyya S, Issakhov A. Exergetic performance estimation for roughened triangular duct used in solar air heaters. Journal of Thermal Analysis and Calorimetry . 2021; Online Published. pp. 1 - 12. https://doi.org/10.1007/s10973 - 021 - 10852 - w. Impact Factor: 4.626 , Quart ile: Q1 .
  5. Kumar R, Goel V, Bhattacharyya S , Tyagi V V., Abusorrah AM. Experimental investigation for heat and flow characteristics of solar air heater having symmetrical gaps in multiple - arc rib pattern as roughness elements. Experimental Heat Transfer. 202 1; Online Published. pp. 1 - 18. https://doi.org/10.1080/08916152.2021.1905752. Impact Factor: 4.058 , Quartile: Q1 .
  6. Afzal A, Saleel CA, Prashantha K, Bhattacharyya S , Sadhikh M. Parallel finite volume method - based fluid flow computations using OpenMP and CUDA applying different schemes. J Therm Anal Calorim. 2021; Online Published. pp. 1 - 19. https://doi.org/10.1007/s10973 - 021 - 10637 - 1 . Impact Factor: 4.626 , Quartile: Q1 .
  7. Bhattacharyya S, Vishwakarma DK, Goel V, Chamoli S, Issakhov A, Meyer JP. Thermodynami cs and heat transfer study of a circular tube embedded with novel perforated angular - cut alternate segmental baffles. J Therm Anal Calorim. 2021;Online Published. pp. 1 - 23. https://doi.org/10.1007/s10973 - 021 - 10718 - 1. Impact Factor: 4.626 , Quartile: Q1 .
  8. Bhattacharyya S , Benim AC, Bennacer R, Dey K. Influence of Broken Twisted Tape on Heat Transfer Performance in Novel Axial Corrugated Tubes: Experimental a nd Numerical Study. Heat Transfer Eng ineering . 2021; Online Publisshed. pp. 1 - 25. https://doi.org/10.1080/01457632.2021.1875168. Impact Factor: 2.172 , Quartile: Q2 .
  9. Das SG, Bhattacharyya S , Chattopadhyay H, Benim AC. Transport Phenomenon of Simultaneously Developing Flow and Heat Transfer in Twisted Sinusoidal Wavy Microchannel under Pu lsating Inlet Flow Condition. Heat Transfer Engineering. 2021; Online Publisshed. pp. 1 - 14. https://doi.org/10.1080/01457632.2021.1875166. Impact Factor: 2.172 , Quartile: Q2 .
  10. Souayeh B, Bhattacharyya S , Hdhiri N, Alam MW. Heat And Fluid Flow Analysis and A NN - Based Prediction of a Novel Spring Corrugated Tape . Sustain ability . 2021;13 , pp.3023 . Impact Factor: 3.251 , Quartile: Q2 .
  11. Bhattacharyya S , Sarkar D, Roy R, Chakraborty S, Goel V, Almatrafi E. Application of New Artificial Neural Network to Predict Heat Transfer and Thermal Performance of a Solar Air - Heater Tube . Sustainability. 2021;13, pp.7477. Impact Factor: 3.251 , Quartile: Q2 .
  12. Bhattacharyya S , Vishwakarma DK, Chakraborty S, Roy R, Issakhov A, Sharifpur M. Turbulent Flow Heat Transfer through a Circul ar Tube with Novel Hybrid Grooved Tape Inserts: Thermohydraulic Analysis and Prediction by Applying Machine Learning Model. Sustainability. 2021;13, pp.3068. Impact Factor: 3.251 , Quartile: Q2 .
  13. Paul AR, Bhattacharyya S . Analysis and Design for Hydraulic Pipeline Carrying Capsule Train. J Pipeline Syst Eng Pract. 2021;12, pp. 04021003. Impact Factor: 1.952 , Quartile: Q3 .
  14. Hasan MI, Khafeef MJ, Mohammadi O, Bhattacharyya S , Issakhov A. Investigation of counterflow microcha nnel heat exchanger with hybrid nanoparticles and pcm suspension as a coolant. Math Probl Eng. 2021;Vol. 2021. pp. 1 - 12. Impact Factor: 1.305 , Quartile: Q3 .
  15. Ibrahim N.H M, Udayakumar M, Suresh S, Bhattacharyya S , Sharifpur M. Coupling LES with soot model for the study of soot volume fraction in a turbulent diffusion jet flames at various Reynolds number configurations. International Journal of Numerical Methods for Heat & Fluid Flow . 202 1 ; Vol. 31 No. 7, pp. 2246 - 2278 . https://doi.org/10.1108/HFF - 07 - 2020 - 0458 . Impact Factor: 4.17 , Quartile: Q1 .
  16. Bhattacharyya S, Sarkar D, Mahabaleshwar US, Soni MK, Mohanraj M. Experimental study of thermohydraulic characteristics and irreversibility analysis of novel axial corrugated tube with spring tape inserts. The European Physical Journal Applied Physics . 2020. Vol. 92 (3), pp. 30901 . Impact Factor: 1.00 , Quartile: Q4.
  17. Bhattacharyya S, Das SG, Chattopadhyay H. Thermohydraulic characteristics and entropy analysis of a novel clockwise and anti - clockwise twisted sinuso idal wavy micro - channel under pulsating inlet condition. The European Physical Journal Applied Physics . 2020. Vol. 92 (2 ), pp.30903 . Impact Factor: 1.00 , Quartile: Q4 .
  18. Murmu SC, Bhattacharyya S, Chattopadhyay H, Biswas R. Analysis of heat transfer around bluff bodies with variable inlet turbulent intensity: A numerical simulation. International Communications in Heat and Mass Transfer . 2020; Vol. 117, pp. 104779. https://doi.org/10.1016/j.icheat masstransfer.2020.104779 . Impact Factor: 5.683 , Quartile: Q1 .
  19. Everts M, Bhattacharyya S, Bashir AI, Meyer JP. Heat transfer characteristics of assisting and opposing laminar flow through a vertical circular tube at low Reynolds numbers. Appl ied Therm al Eng ineering. 2020. Vol. 179, pp. 115696. https://doi.org/10.1016/j.applthermaleng.2020.115696 . Impact Factor: 5.295 , Quartile: Q1 .
  20. Bhattacharyya S, Pathak M, Sharifpur M, Chamoli S, Ewim DRE. Heat Transfer a nd Exergy Analysis o f Solar Air Heater Tube With Helical Corrugation a nd Perforated Circular Disc Inserts . J Therm Anal Calorim . 2020; Online Published. pp. 1 - 16. https://doi.org/10.1007/s10973 - 020 - 10215 - x . Impact Factor: 4.626 , Quartile: Q1 .
  21. Soni MK, Tamar N, Bhattacharyya S . Numerical simulation and parametric analysis of latent heat thermal energy storage system. J Therm Anal Calorim . 2020. Vol.141, pp. 2511 26. https://doi.org/10.1007/s10973 - 020 - 10175 - 2 . Impact Factor: 4.626 , Quartile: Q1 .
  22. Bhattacharyya S, B HR, Paul AR. T he effect of circular hole spring tape on the turbulent heat transfer and entropy analysis in a heat exchanger tube: an experimental study. Exp erimental Heat Transf er . 2020; pp. 1 20. doi.org/10.1080/08916152.2020.1787560 . Impact Factor: 4.058 , Quartile: Q1 .
  23. Bhattacharyya S, Bashir AI, Dey K, Sarkar R. Effect of novel short - length wavy - tape turbulators on fluid flow and heat transfer: experimental study. Experimental Heat Transfer. 2020. Vol. 33, pp. 335 54. https://doi.org/10.1080/08916152.201 9.1639847 . Impact Factor: 4.058 , Quartile: Q1 .
  24. Singh SK, Bhattacharyya S, Paul AR, Sharifpur M, Meyer JP. Augmentation of heat transfer in a microtube and a wavy microchannel using hybrid nanofluid: A numerical investigation. Math Methods Appl Sci. 2020. Online Published. https://doi.org/10.1002/mma.6849 . Impact Factor: 2.321 , Quartile: Q1 .
  25. Bhattacharyya S, Souayeh B, Banerjee A, Sarkar R, Rahimi - Gorji M, Minh Nguyen H. Numerical analysis of micro - pin - fin heat sink cooling in the mainboard chip of a CPU. T he European Physical Journal Plus . 2020. Vol. 135, pp. 1 10. https://doi.org/10.1140/epjp/s13360 - 020 - 00359 - y . Impact Factor: 3.911 , Quartile: Q1 .
  26. Alam MW, Bhattacharyya S, Souayeh B, Dey K, Hammami F, Rahimi - Gorji M, et al. CPU heat sink cooling by triangu lar shape micro - pin - fin: Numerical study. Int Commun Heat Mass Transf . 2020. Vol. 112, pp. 104455. https://doi.org/10.1016/j.icheatmasstransfer.2019.104455 . Impact Factor: 5.683 , Quartile: Q1 .
  27. Bhattacharyya S. Fluid Flow and Heat Transfer in a Heat Exchanger Channel with Short - Length Twisted Tape Turbulator Inserts. Iran J Sci Technol - Trans Mech Eng.; 2020; Vol. 44, pp. 217 27. Impact Factor: 1.596 , Quartile: Q3 .
  28. Bhattacharyya S, Chattopadhyay H, Biswas R, Ew im DRE, Huan Z. Influence of Inlet Turbulence Intensity on Transport Phenomenon of Modified Diamond Cylinder: A Numerical Study. Arab J Sci Eng . 2020. Vol. 45(2), pp. 1051 8. https://doi.org/10.1007/s13369 - 019 - 04231 - 9 . Impact Factor: 2.334 , Quartile: Q3 .
  29. Bhattacharyya S, Benim AC, Pathak M, Chamoli S, Gupta A. Thermohydraulic characteristics of inline and staggered angular cut baffle inserts in the turbulent flow regime. J Therm Anal Calorim . 202 0. Vol. 140, pp. 1519 36. https://doi.org/10.1007/s10973 - 019 - 09094 - 8 . Impact Factor: 4.626 , Quartile: Q1 .
  30. Bhattacharyya S. The effects of short length and full length swirl generators on heat transfer and flow fields in a solar air heater tube. J Therm Anal Calorim . 2020. Vol. 140, pp. 1355 69. https://doi.org/10.1007/s10973 - 019 - 08764 - x . Impact Factor: 4.626 , Quartile: Q1 .
  31. Biswas R, Das MC, Bhattacharyya S, Kuar AS, Mitra S. Selection of Nd:YAG laser beam micro - drilling parameters using multi - criteria decision ma king methods. Opt Laser Technol. 2 019. Vol. 119, pp. 105596. https://doi.org/10.1016/j.optlastec.2019.105596 . Impact Factor: 3.867 , Quartile: Q1 .
  32. Bhattacharyya S, Benim AC, Chattopadhyay H, Banerjee A. Experimental investigation of heat transfer performance of corrugated tube with spring t ape inserts. Exp Heat Transf . 2019. Vol. 32, pp. 411 25. https://doi.org/10.1080/08916152.2018.1531955 . Impact Factor: 4.058 , Quartile: Q1 .
  33. Bhattacharyya S, Benim AC, Chattopadhyay H, Banerjee A. Experimental and numerical analysis of forced convection in a twisted tube. Therm Sci. 2019. Vol. 23 (4), pp. 1043 - 1052 . Impact Factor: 1.625 , Quartile: Q3 .
  34. Bhattacharyya S, Chattopadhyay H, Guin A, Benim AC. Investigation of Inclined Turbulators for Heat Transfer Enhancement in a Solar Air Heater. Heat Transf Eng . 2019. Vol. 40, pp. 1451 60. https://doi.org/10.1080/01457632.2018.1474593 . Impact Factor: 2.223 , Quartile: Q 2 .
  35. Bhattacharyya S, Chattopadhyay H, Haldar A. Design of twisted tape turbulator at different entrance angle for heat transfer enhancement in a sol ar heater. Beni - Suef Univ J Basic Appl Sci. 2018. Vol. 7, pp. 118 26. https://doi.org/10.1016/j.bjbas.2017.08.003 . Impact Factor: 0.7 , Quartile: Q 3 .
  36. Bhattacharyya S, Chattopadhyay H, Benim AC. Computational investigation of heat transfer enhancement by alternating inclined ribs in tubular heat exchang er. Prog Comput Fluid Dyn. 2017. Vol. 17 (6), pp. 390 - 396 . https://doi.org/10.1504/PCFD.2017.088818 . Impact Factor: 1.048 , Quartile: Q 3 .
  37. Bhattacharyya S, Chattopadhyay H, Benim AC. Simulation of heat transfe r enhancement in tube flow with twisted tape insert. Prog Comput Fluid Dyn. 2017 . Vol. 17 (3), pp. 193 7. https://doi.org/10.1504/PCFD.2017.084356 . Impact Factor: 1.048 , Quartile: Q 3 .
  38. Bhattacharyya S, Saha S, Saha SK. Laminar flow heat transfer enhancement in a circular tube having integral transverse rib roughness and fitted with centre - cleared twisted - tape. Exp Therm Fluid Sci. 2013. Vol. 44, pp. 727 35. http://dx.doi.org/10.1016/j.expthermflusci.201 2.09.016 . Impact Factor: 3.232 , Quartile: Q 1 .
  39. Bhattacharyya S, Saha SK. Thermohydraulics of laminar flow through a circular tube having integral helical rib roughness and fitted with centre - cleared twisted - tape. E xp Therm Fluid Sci. 2012. Vol. 42, pp. 154 62. http://dx.doi.org/10.1016/j.expthermflusci.2012.05.002 . Impact Factor: 3.232 , Quartile: Q 1 .
  40. Saha SK, Bhattacharyya S, Pal PK. Thermohydraulics of laminar flow of viscous oil through a circular tube having integral axial rib roughness and fitted with center - cleared twisted - tape. Exp Therm Fluid Sci. 2012. Vol. 41, pp. 121 - 129 . https://doi.org/10.1016/j.expthermflusci.2012.04.004 . Impact Factor: 3.232 , Quartile: Q 1 .
  41.  Saha S , Bhattacharyya S, Dayanidhi GL. Enhancement of heat transfer of laminar flow of viscous oil through a circular tube having integral axial rib roughness and fitted with helical screw - tape inserts . Heat Transfer Research . 2012. Vol. 43 (3) , pp. 207 - 227. DOI: 10.1615/HeatTransRes.20120042 68 . Impact Factor: 2.443 , Quartile: Q 2 .

Conference Publications

 

Conference Paper Published: 70.

Some selected conference papers outside India:

  1. Suvanjan Bhattacharyya, Arnab Banerjee, Ali Cemal Benim, Rachid Bennacer, “Influence of broken twisted tape on heat transfer performance in novel triangular axial corrugated tubes: experimental and numerical study”, XII International Conference on Computational Heat, Mass and Momentum Transfer” Rome, Italy, 3-6 September, 2019.
  2. Suvanjan Bhattacharyya, Ali Cemal Benim, Arnab Banerjee, M.A. Moghimi, “Heat transfer performance and optimization of square ribs on two walls in a solar air-heater duct”, XII International Conference on Computational Heat, Mass and Momentum Transfer” Rome, Italy, 3-6 September, 2019.
  3. Suvanjan Bhattacharyya, Arnab Banerjee, Marilize Everts, Kunal Dey, Josua P Meyer, “Thermohydraulic characteristics of transitional flow in a circular tube with inlet disturbances”, 14th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics (HEFAT2019), 22 – 24 July 2019, Wicklow, Ireland.
  4. Abubakar I Bashir, Marilize Everts, Suvanjan Bhattacharyya, Josua P Meyer, “Effect of inclination buoyancy on pressure drop in the laminar and transitional flow regimes of smooth circular tube”, 14th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics (HEFAT2019), 22 – 24 July 2019, Wicklow, Ireland.
  5. Suvanjan Bhattacharyya, Marilize Everts, Abubakar I Bashir, Josua P Meyer, “Experimental investigation of the heat transfer characteristics of laminar flow in a vertical circular tube at low Reynolds numbers”, 16th UK Heat Transfer Conference (UKHTC2019), University of Nottingham, UK, September 8-10, 2019.
  6. Suvanjan Bhattacharyya, Arnab Banerjee, Md. Anisur Rahman, Reeshika Saha, Akshoy Ranjan Paul, “Numerical analysis of heat transfer and flow dynamics in a pipe with square extruded bluff cylinder inserts”, 2nd International Conference on Energy and Power, ICEP2018, 13-15 December 2018, Sydney, Australia.
  7. Suvanjan Bhattacharyya, Kunal Dey, Rajdeep Hore, Arnab Banerjee, Akshoy Ranjan Paul, “Computational study on thermal energy around diamond shaped cylinder at varying inlet turbulent intensity”, 2nd International Conference on Energy and Power, ICEP2018, 13-15 December 2018, Sydney, Australia. 
  8. S. Bhattacharyya, H. Chattopadhyay, K. Dey, A. Jhunjhunwala, “Effects of turbulent intensity and position of a tringular bluff cylinder on heat transfer: numerical study”, 4th Thermal and Fluids Engineering Conference (TFEC), April 14 –17, 2019. Las Vegas, NV, USA.
  9. Suvanjan Bhattacharyya, Himadri Chattopadhyay, Arnab Banerjee, Ali Cemal Benim, 2018, “Heat Transfer and Fluid Flow Behaviors of a Circular Twisted Channel”, 11th  International Conference on Computational Heat, Mass and Momentum Transfer, ICCHMT 2018, Cracow, Poland, 21-24 May 2018.
  10. Suvanjan Bhattacharyya, H. Chattopadhyay, S. Show, “Interactions between Heat Transfer and Flow Field in a Square Channel with Triangular Prism”, 3rd Thermal and Fluids Engineering Conference (TFEC), March 4 –7, 2018, Fort Lauderdale, FL, USA.
  11. Suvanjan Bhattacharyya, JP Meyer, A. Sarkar, S. Das, “Experimental Study on Heat Transfer Enhancement Characteristics Of Duct Inserted With Short Length Angular Cut Twisted Tape, International Conference on Thermal and Fluid Engineering: ICFT- 2017, 3 – 5 JULY 2017, Thailand.
  12. Suvanjan Bhattacharyya, Himadri Chattopadhyay, A. C. Benim, “Novel Design of V-shape Winglet Turbulator For Heat Transfer Enhancement in a Solar Air heater”, 10th  International Conference on Computational Heat, Mass and Momentum Transfer, ICCHM2T, Seoul, South Korea, 28th May, 2017 – 1st June, 2017.
  13. Suvanjan Bhattacharyya, Himadri Chattopadhyay, Ali Cemal Benim, “Heat Transfer Enhancement Of Laminar Flow Of Ethylene Glycol Through A Square Channel Fitted With Angular Cut Wavy Strip”, ICCHMT 2016, Cracow, Poland, 23-26 May 2016.
  14. Suvanjan Bhattacharyya, Himadri Chattopadhyay, “Computational of Studies of Heat Transfer Enhancement in Turbulent Channel Flow with Twisted Strip Inserts”, Proceedings of CHT-15, ICHMT International Symposium on Advances in Computational Heat Transfer, May 25-29, 2015, Rutgers University, Piscataway, USA.

 

Some selected conference papers in India:

 

  1. Suvanjan Bhattacharyya, Md Anisur Rahman, Rajat Subhra Bhowmik, Ranjib Biswas, “Experimental investigation of heat transfer performance and entropy generation in a helical corrugated solar air heater duct with matrix roughness, 11th International Exergy, Energy and Environment Symposium (IEEES-11), July14-18, 2019, Chennai, India.
  2. Suvanjan Bhattacharyya, Sampad Gobinda Das, Kunal Dey, Himadri Chattopadhyay, “Thermohydraulic Performance and Optimization of Convex Dimples Microchannel under Pulsating Inlet Flow Condition”, 11th International Exergy, Energy and Environment Symposium (IEEES-11), July14-18, 2019, Chennai, India.
  3. Suvanjan Bhattacharyya, Arnab Banerjee, Aakash Jhunjhunwala, Rishav Sarkar, Amitava Mitra, The influence of wire-coil inserts on the heat transfer and pressure drop of a helically corrugated tube: Experimental study, 11th International Exergy, Energy and Environment Symposium (IEEES-11), July14-18, 2019, Chennai, India. 
  4. Smapad Gobinda Das, Suvanjan Bhattacharyya, Himadri Chattopadhyay, Arnab Banerjee, “Thermohydraulic characteristics of regularly spaced square twisted micro-channel Under Pulsating Inlet Flow Condition”, 25thNational and 3rd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2019), 28-31 December 2019, India.
  5. Suvanjan Bhattacharyya, Md. Anisur Rahman, Aakash Jhunjhunwala, Ranjib Biswas, Akshoy Ranjan Paul, “Transport phenomenon over array of diamond cylinders with varying inlet turbulent intensity”, 25thNational and 3rd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2019), 28-31 December 2019, India.
  6. Suvanjan Bhattacharyya, Rishav Modi, Kunal Dey, Md Anisur Rahman, Manabendra Pathak, “Heat transfer and flow characteristics of circular channels with mixed ribs configuration”, 25thNational and 3rd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2019), 28-31 December 2019, India.
  7. Suvanjan Bhattacharyya, Kunal Dey, M.A. Moghimi, Md Anisur Rahman, Hardik Kothadia, “3D numerical analysis and optimization of heat transfer augmentation over rhombus cylinder with different orientation”, 25thNational and 3rd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2019), 28-31 December 2019, India.
  8. Suvanjan Bhattacharyya, Arnab Banerjee, Himadri Chattopadhyay, Marilize Everts, Josua P Meyer, “The influence of circular bluff body at inlet of the circular tube on thermohydraulic characteristics in the transitional flow regime”, 25thNational and 3rd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2019), 28-31 December 2019, India.
  9. M.A. Moghimi, Suvanjan Bhattacharyya, G. Ahmadi, A. C. Benim, “Numerical analysis of porous wind barrier for minimizing collector mirror soiling in a parabolic trough collector plant”, 25thNational and 3rd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2019), 28-31 December 2019, India.
  10. Hardik Kothadia, Suvanjan Bhattacharyya, S. V. Prabhu, “Effect of Orientation on Flow Boiling Process in Helical Coils”, 25thNational and 3rd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2019), 28-31 December 2019, India.
  11. Suvanjan Bhattacharyya, H. Chattopadhyay, S. G. Das, A. Banerjee, “Heat Transfer and Fluid Flow behaviours of a Square Twisted Micro-Channel”, Proceedings of the 7th International and 45th National Conference on Fluid Mechanics and Fluid Power (FMFP),  December 10-12, 2018, IIT Bombay, MumbaiIndia.
  12. Suvanjan Bhattacharyya, K. Dey, Md A. Rahman, R. Bennacer, “Influence of turbulence intensity at inlet on the fluid flow and heat transfer around square and circular cylinder”,   Proceedings of the 7th International and 45th National Conference on Fluid Mechanics and Fluid Power (FMFP),  December 10-12, 2018, IIT Bombay, Mumbai, India.
  13. Suvanjan Bhattacharyya, H. Chattopadhyay, A. Guin, A. Banerjee, “3D computational study of fluid flow and heat transfer in a dimple enhancer channel”, 24th National and 2nd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2017), 27-30 December 2017, Hyderabad, India.
  14.  Suvanjan Bhattacharyya, P. Das, A. Haldar, “Perfomance analysis of a geothermal air conditioner using nanofluid”, International Conference on Nano for Energy and Water & Indo French Workshop on Water Networking, February 22-24, 2017, University of Petroleum and Energy Studies (UPES), Dehradun, India.
  15. Suvanjan Bhattacharyya, H. Chattopadhyay, A. Guin, “Numerical Investigation of Heat Transfer  and Flow Characteristics of Cu/Water Nanofluid in a Wavy Ribbed Channel”, International Conference on Nano for Energy and Water & Indo French Workshop on Water Networking, February 22-24, 2017, University of Petroleum and Energy Studies (UPES), Dehradun, India.
  16. Suvanjan Bhattacharyya, S. Agarwal, R. Das, S. Das, A. Sarkar, “A numerical study of three dimensional flows past a bluff body for  AL2O3-H2O  solution”, International Conference on Nano for Energy and Water & Indo French Workshop on Water Networking, February 22-24, 2017, University of Petroleum and Energy Studies (UPES), Dehradun, India.
  17. Suvanjan Bhattacharyya, Himadri Chattopadhyay, “3D CFD Simulation on Heat Transfer Enhancement in Turbulent Channel Flow with Wavy Tape Inserts at Different Entrance Angle”, Proceedings of the 6th International and 43rd National Conference on Fluid Mechanics and Fluid Power, December 15-17, 2016, MNNITA, Allahabad, U.P., India.
  18. Suvanjan Bhattacharyya, Himadri Chattopadhyay, et al., “Thermohydraulic Transport Characteristics of Micro Mixer in Micro Channel”, Recent Advances in Chemical Engineering -  Proceedings of ICACE, NITK Surathkal, Part I, Book Chapter – Springer Singapore, 2016, pp - pp 29-39. DOI - 10.1007/978-981-10-1633-2_4
  19. Suvanjan Bhattacharyya, Anirban Roy, Himadri Chattopadhyay, Aritra Rakshit, “A Numerical Investigation Based on Heat Transfer and Fluid Flow Characteristics of Air in a Circular Tube Heat Exchanger with Inclined Ribs”, Recent Advances in Chemical Engineering -  Proceedings of ICACE, NITK Surathkal, Part I, Book Chapter – Springer Singapore, 2016, pp - pp 11-20. DOI - 10.1007/978-981-10-1633-2_2.
  20. Suvanjan Bhattacharyya, Himadri Chattopadhyayay, Anindya Guin, “Enhancement of Heat Transfer through Ribbed Wavy Channel”, National Conference on Advances in Thermal Engineering (NCATE2016), Jadavpur University, 23 -24 September 2016.
  21. Suvanjan Bhattacharyya, Himadri Chattopadhyay, Nayan Biswas, Aritra Rakshit, Anirban Roy, “Numerical Simulation of The Turbulent Air Flow in the Narrow Circular Channel with Centre-Cleared Rib Vortex Generator”, ICCMS2016, IIT Bombay, Mumbai, India, June 27-July 1, 2016.
  22. Suvanjan Bhattacharyya, Sumanta Laha, Satyaki Basu, Sampad Gobinda Das, Himadri Chattopadhyay, “Thermohydraulic Transport Characteristics of Inclined Ribs in Micro Channel”, ICCMS2016, IIT Bombay, Mumbai, India, June 27-July 1, 2016.
  23. Suvanjan Bhattacharyya, Himadri Chattopadhyay, Tarun Kanti Pal, Anirban Roy, “Numerical Investigation of Thermohydraulics Performance in Elliptical Twisted Duct Heat Exchanger”, 28th International Conference on CAD-CAM, Robotics and Factories of the Future 2016 , January 6 – 8, 2016, Kolaghat, West Bengal. India. (Springer, Scopus Index) 

Publications

Journal Articles

  1. Nagpal, Gaurav, Chanda, Udayan and Kumar, Alok, "Inventory Modelling for technology generation products under uncertain trade credit terms and imprecise procurement costs", Operations and Supply Chain Management: An International Journal (Accepted for publication).
  2. Singh, Munish Pal, Sharma, Satyendra, and Chanda, Udayan. “Identification and Modelling of Factors influencing Service Recovery”, Int. J. of Services and Operations Management (Accepted for publication).
  3. Singh, Munish Pal, Sharma, Satyendra, and Chanda, Udayan. “Measuring Service Quality in Indian Automobile Aftersales: AutoIND Scale”, Int. J. of Business Process Management and Benchmarking (Accepted for publication).
  4. Nagpal, Gaurav and Chanda, Udayan. "P-Model of Inventory Optimization for high technology multi-generation products under limited warehouse storage space" International Journal of Applied Management Science (Accepted for publication).
  5. Nagpal, G., Chanda, U., Jasti, N. V. K., & Gupta, S. (2022). Multi-Period EOQ Model for Multi-Generation Technology Products With Short Product Life Cycles. International Journal of E-Adoption (IJEA), 14(1), 1-22.
  6. Nagpal, Gaurav,  Chanda, Udayan, Seth, Himanshu and Ruparel, Namita (2022). “Inventory Replenishment Policies for Two Successive Generations of Technology Products under Permissible Delay in Payments”, International Journal of Information Systems and Supply Chain Management, 15(1), 1-29.
  7. Sharma, Satyendra, Routroy, Srikanta and Chanda, Udayan (2022). “Supply-Side Risk Modelling Using Bayesian Network Approach”, Supply Chain Forum: an International Journal, 1-23  (doi.org/10.1080/16258312.2021.1988697).
  8. Nagpal, G., Chanda, U., & Upasani, N. (2022). Inventory replenishment policies for two successive generations price-sensitive technology products. Journal of Industrial & Management Optimization. 18(3), 1629-1650.
  9. Nagpal, G., Chanda, U., & Seth, H. (2021). “The First Half-Century of Decision Modelling for Substitutable Products: A Literature Review and Bibliographic Analysis”. Operations and Supply Chain Management: An International Journal, 14(3), 261-276.
  10. Nagpal, Gaurav and Chanda, Udayan (2021). “Optimal inventory policies for short life cycle successive generations’ technology products”. Journal of Management Analytics, 1-26.
  11. Nagpal, Gaurav and Chanda, Udayan (2021). “Economic Order Quantity Model for Two Generation Consecutive Technology Products under Permissible Delay in Payments”. International Journal. of Procurement Management, 14(1), 93-125.
  12. Nagpal, Gaurav and Chanda, Udayan. (2020) "Adoption and Diffusion of Hi-Technology Product and Related Inventory Policies: An Integrative Literature Review and Suggestions for Future Research" International Journal of E-Adoption, 12(1), 1-14.
  13. Bhat, Dilawar Ahmad, Chanda, Udayan and Bhat Anil, (2020) “Does firm size influence leverage? Evidence from India”, Global Business Review (DOI: 10.1177/0972150919891616)
  14. Chanda, Udayan and Goyal, Praveen (2019)  "Optimal Investment of Resources in Creation Of Human Capital: A Control Theoretic Approach", International Journal of Operations and Quantitative Management 25(4), 239-252. (DOI: 10.46970/2019.25.4.2)
  15. Chanda, Udayan and Goyal, Praveen. (2020) “A Bayesian network model on the interlinkage between Socially Responsible HRM, Employee Satisfaction, Employee Commitment and Organizational Performance”. Journal of Management Analytics 7(1), 105-138.
  16. Chanda, Udayan and Kumar, Alok. (2019). “Optimal ordering policy for Short Life-cycle Products under Credit financing with dynamic adoption in supply chain”. Journal of Management Analytics, 6:3, 269-301..
  17. Chanda, Udayan  and  Goyal,  Praveen, (2019) "Assessing impact of Human Capital, SRHRM and Employee related factors on Firm Performance", Journal of Industrial Integration and Management: Innovation and Entrepreneurship, 4: 2; 1850018: 1- 35.
  18. Chanda, Udayan and Kumar, Alok.  (2019) "Optimization of EOQ Model for New Products under Multi-Stage Adoption Process", International Journal of Innovation and Technology Management, 16: 2, 1950015: 1-25
  19. Kumar, Alok and Chanda, Udayan (2018). "Two-Warehouse Inventory Model for Deteriorating Items with Demand influenced by Innovation Criterion in Growing Technology Market”, Journal of Management Analytics 5:3, 198-212, DOI: 10.1080/23270012.2018.1462111.
  20. Chanda, Udayan, Kumar, Alok and Das, Jitendra Kumar (2018). "Fuzzy EOQ model of a high technology product under trial-repeat purchase demand criterion", International Journal of Modelling and Simulation  38:3, 168-179.
  21. Kumar, Alok and Chanda, Udayan (2017) "Effect of Shape of the Demand Function and Permissible Delay in Payments on Economic Order Quantity of High Technology Products", International Journal of Services and Operations Management, 28(2), 243-263.
  22. Sharma, Satyendra, and Chanda, Udayan (2017). “Developing a Bayesian Belief Network Model for prediction of R & D Project Success”, Journal of Management Analytics, 4(3), 321-344.
  23. Chanda, Udayan and Kumar, Alok (2017) "Optimisation of fuzzy EOQ model for advertising and price sensitive demand model under dynamic ceiling on potential adoption", International Journal of Systems Science: Operations & Logistics, 4(2), 145-165.
  24. Goyal, Praveen and Chanda, Udayan (2017) “A Bayesian Network Model on the association between CSR, perceived service quality and customer loyalty in Indian Banking Industry”, Sustainable Production and Consumption, 10, 50–65.
  25. Aggarwal, Remica and Chanda, Udayan (2017), "Optimal Duration of Advertising Campaigns for Successive Technology Generations using Innovation Diffusion Theory", International Journal of Operational Research, 28(3), 415 – 428.
  26. Chanda, Udayan; Goyal, Praveen and Kadadevaramath, Rajeshwar S. (2017). "Evidence Based Process in Business and Systems", International Journal of Business and Systems Research, 11 (1), 1-5.
  27. Kumar, Alok and Chanda, Udayan, (2017), "Economic Order Quantity under Permissible Delay in Payments for New Products in Dynamic Pricing-Advertising Condition", International Journal of Business Innovation and Research, 13(2), 203 - 221.
  28. Chanda, Udayan, Bhat, Anil, Sharma, Satyendra Kumar and Bardhan, Amit (2016). “Evidence based management for services sector”, International Journal of Information Systems in the Service Sector, 8(4), vi - ix.
  29. Chanda, Udayan and Aggarwal, Remica, (2016) "Bayesian Network on Labour Dissonance: A Social Sector Development challenge to India", Journal of Management Analytics,  3(1), 80-111.
  30. Kumar, Alok and Chanda, Udayan (2016), "Economic Order Quantity Model for New Product under Fuzzy Environment where Demand follows Innovation Diffusion Process with Salvage Value", International Journal of Procurement Management, 9(3), 290-309.
  31. Bhatia, Manan and Chanda, Udayan (2016). “Impact of Network Externalities and Churn Analysis of Indian Telecom Market”. International Journal of Innovative Research & Development , 5(2), pp. 169 – 177.
  32. Chanda, Udayan and Das, Soumitra, (2015), "Multi-Stage Diffusion Dynamics in Multiple Generation High Technology Products", Journal of High Technology Management Research, 26(1), 88–104.
  33. Chanda, Udayan and Aggarwal, Remica, (2014), "Optimal Inventory Policies for Successive Generations of a High Technology Product", Journal of High Technology Management Research, 25(2), 148–162.
  34. Nasar, Md., Johri, Prashant and Chanda, Udayan, (2014), “Resource Allocation Policies for Fault Detection and Removal Process”. International Journal of Modern Education and Computer Science, 11, 52-57.
  35. Nasar, Md., Johri, Prashant and Chanda, Udayan, (2014), “Dynamic Effort Allocation Problem Using Genetic Algorithm Approach”. International Journal of Modern Education and Computer Science, 6(6), 46-52.
  36. Aggarwal, Remica and Chanda, Udayan (2014), “Optimal Advertising Campaign Duration Of Successive Generation Product Using Diffusion Of Information”, Journal of General Management Research, 1(1), 108-116.
  37. Nasar, Md., Johri, Prashant and Chanda, Udayan, (2014), “Software Testing Resource Allocation and Release Time Problem: A Review”. International Journal of Modern Education and Computer Science, 6(2), 48-55.
  38. Kapur, P.K., Hoang, P. Chanda, U., and Kumar, V., (2013), "Optimal Allocation of Testing Effort during Testing and Debugging Phases:  A Control Theoretic Approach", International Journal of Systems Science, 44(9), pp. 1639-1650.
  39. Kumar, A., Aggarwal, K.K. and Chanda, U., (2013), ‘Economic order quantity model under fuzzy sense with demand follows Bass’s innovation diffusion process’, Int. J. Advanced Operations Management, 5(3), pp.261–281.
  40. Johri, P., Nasar, Md. and Chanda, U. (2013), "A Genetic Algorithm Approach for Optimal Allocation of Software Testing Effort", International Journal of Computer Applications, 68(5), pp. 21-25.
  41. Nasar, Md, Johri, P. and Chanda, U. (2013),"A Differential Evolution Approach for Software Testing Effort Allocation", Journal of Industrial and Intelligent Information 1(2), pp. 111-115.
  42. Chanda, U. and Kumar, A., (2012) “Economic Order Quantity Model on Inflationary Conditions   with   Demand   Influenced   by   Innovation   Diffusion   Criterion”, International Journal of Procurement Management, vol. 5(2), 160-177.
  43. Chanda, U. and Kumar, A. (2011) “Economic Order Quantity Model with Demand Influenced by Dynamic Innovation Effect,” International Journal of Operational Research, 11 (2), pp. 193-215.
  44. Chanda, U., (2011), “Optimal Control Policies for a Price-Quality Decision Model for Two Competing Technology Generations”.  International Journal of Innovation and Technology Management, 8(4), pp. 635–660.
  45. Kapur, P.K., Garg, R.B., Chanda, U. and Tandon, A. (2010) “Development of Software Reliability Growth Model Incorporating Enhancement of Features and Related Release Policy”.  International Journal of System Assurance and Engineering Management, vol.-1, No.-1, 33-39.
  46. Kapur, P.K., Singh, O., Chanda, U. and Basirzadeh, M. (2010), Determining Adoption Pattern with pricing using Two Dimensional Innovation Diffusion Model”. Journal of High Technology Management Research, 21(2), 136-146.
  47. Kapur, P.K., Chanda, Udayan and Kumar, Vijay, (2010)"Dynamic Allocation of Testing Effort when Testing and Debugging are done Concurrently", Communications in Dependability and Quality Management (CDQM), vol. 13(3), 14-28. 
  48. Bardhan, A.K. and Chanda, U., (2009) “A Mathematical Model for Diffusion of Products with Multiple Generations”, International Journal of Operational Research, vol.-4, No.-2, 214-229.
  49. Bardhan, A.K. and Chanda, U., (2008) “A Model for First and Substitution Adoption of Successive Generations of a Product”. International Journal of Modelling and Simulation, vol.-24, No.-4, 4893-4900.
  50. Chanda, U., and Bardhan, A.K. (2008), “Modelling Innovation and Imitation Sales of multiple   Technological   Generation   Products”. Journal of High Technology Management Research, vol-18, No.-2, 173-190.
  51. Chanda, U., and Bardhan, A.K., (2008) “A study of Diffusion Parameters and Marketing   Decision   Variables   for   a   family   of   Technological   Innovations”. International Journal of Technology Marketing, vol.-3, No.-4, 358-375.
  52. Bardhan, A.K., and Chanda, U.  (2007). “A model for Adoption of Successive Generations of a High Technology Product”.  International Journal of Technology Marketing, vol.-2, No.-1, 53-64.

Book Chapter (Edited Book)

  1. Nagpal, G. & Chanda, U. (2021). “Review of Innovation Modeling Literature”. Transforming Management using Artificial Intelligence techniques, Garg, V. and Agrawal, R.Published by CRC Press, Chapter 11. (https://doi.org/10.1201/9781003032410)
  2. Kumar, Alok and Chanda, Udayan (2016). “Inventory Model For Repeat Purchase Under Innovation Diffusion Criterion”. Competing through Operations Excellence: Agility, Adaptability and Analytics” Das, Jitendra K., Sharma, Mohita Gangwar, Kaur, Sumeet and Kumar, Alok (Ed.) pp. 3-16. BLOOMSBURY INDIA
  3. Chanda, Udayan and Kumar, Alok (2016). “Stage wise Innovation Diffusion with a Dynamic Market”. Competing through Operations Excellence: Agility, Adaptability and Analytics” Das, Jitendra K., Sharma, Mohita Gangwar, Kaur, Sumeet and Kumar, Alok (Ed.), pp. 17-27. BLOOMSBURY INDIA
  4. Chanda, Udayan and Aggarwal, Remica, (2014), “Effect of Advanced Generations on Inventory Policies of a Technological Product”. Trends In Operations and Supply Chain Management, Bhimaraya Metri and Nyoman and Pujawan (Ed.), pp.194-210, McGraw Hill Education (India) Pvt Ltd., New Delhi.
  5. Kapur, P.K., Chanda, U. and Tandon, A. (2010) “Software Release Policy based on Change  Point  Considering  Risk  Cost “,Advances  in  Information  Theory  and Operations Research: Interdisciplinary Trends, Om Parkash (Ed.), pp.111-122, VDM Verlag.
  6. Chanda, U. and Bardhan, A.K., (2009) “Dynamic Optimal Advertising Expenditure Strategies of Two Successive Generations of Consumer Durables”, Modeling, Computation and Optimization, S.K. Neogy (Platinum Jubilee, eds.), Chapter-8, pp. 115-136, World Scientific, Delhi, India.
  7. Bardhan, A.K. and Chanda, U. (2008) “Dynamic Optimal Control Policy in Price and Quality for High Technology Product”.  Mathematical Programming and Game Theory for Decision making, S.K. Neogy, (Platinum Jubilee, eds.), Chapter-13, pp. 201-219, World Scientific, Delhi, India.
  8. Chanda, U. and Bardhan, A.K., (2008) “Diffusion parameters and Marketing decision variables for technological innovations”. Technology and Innovation in Marketing, Rajat Gera (Ed), Section-5, pp. 159-173, Allied Publishers Pvt. Ltd. Delhi, India.

Refereed Conference Proceedings

  1. Nagpal, Gaurav, Chanda, Udayan and Kumar,  Alok (2018). "Inventory Policies for successive generations’ technology products: A Literature Review". 1st International Conference of Association of Inventory Academicians and Practitioners (AIAP) on Emerging Trends in Inventory, Supply Chain & Reliability Modeling (ETISCRM 2018), held at University of Delhi, Delhi, India during December 21-23, 2018.
  2. Kumar, Alok, Das, Jitendra K  and Chanda, Udayan (2018). “Inventory Model for Repeat Purchase under Effect of Permissible Delay in Payments”, FORE International Conference on Digital Innovation 2018 held during December 14th-15th, at FORE School of Management, New Delhi.
  3. Chanda, Udayan, Goyal, Praveen and Sharma, Vaibhav  (2018) "A Bayesian network model for Impact of SHRM on Employee Commitment and Performance" Conference Proceedings of the International Conference on Business, Economics and Sustainable Development (ICBESD 2018) on February 22-23, 2018 at TERI School of Advanced Studies.
  4. Kumar, Alok and Kumar, Alok (2017), “Optimal Inventory Policy under credit financing for dynamic marketing strategy”, Conference Proceedings of the 11th Indian Subcontinent Decision Sciences Institute International Conference (ISDSI), pp. 142.
  5. Chanda, Udayan and  Goyal, Praveen (2017), “Optimal pricing strategies for two successive generations of consumer durables”, Conference Proceedings of the 5th International Conference on Contemporary Marketing Issues (ICCMI) 2017, pp. 505 - 514.
  6. Goyal, Praveen and Chanda, Udayan (2017), “Impact of CSR on customer satisfaction and trust: A study of Indian Hotel Industry”, Conference Proceedings of the 5th International Conference on Contemporary Marketing Issues (ICCMI) 2017, pp. 377 - 383.
  7. Singh, Munish Pal, Sharma, Satyendra Kumar and Chanda, Udayan  (2017), “ A Changing Scenario of Service Quality in Passenger Car Segment”. Proceedings of 2nd International Conference on Evidence Based Management, pp. 132 - 136
  8. Kumar, Alok and Chanda, Udayan (2017), “Effect of Dynamic Potential Adoption on Inventory Policy of New Products" Proceedings of 2nd International Conference on Evidence Based Management, pp. 210 - 214
  9. Chanda, Udayan and Kumar, Alok (2017), " Dynamic Adoption Rate and its Impact on Inventory Policy,Effect of Dynamic Potential Adoption on Inventory Policy of New Products" Proceedings of 2nd International Conference on Evidence Based Management, pp. 215 – 219.
  10. Kumar, Alok and Chanda, Udayan (2015), "Inventory Model for Permissible Delay in Payments of New Products under Dynamic Pricing and Advertising Expenditure" Proceedings of International Conference on Evidence Based Management, vol. 2 493-496.
  11. Chanda, Udayan and Kumar, Alok (2015), "Innovation Diffusion Based Inventory Model under Dynamic Advertising and Pricing Policy" Proceedings of International Conference on Evidence Based Management, vol. 2 661-665. ISBN: 978-93-84935-18-4.
  12. Chanda, Udayan (2015), "“Intergenerational Effects of Diffusion on CDMA and WCDMA Technologies under Direct Network Externalities", 4th Asian Management Research and Case Conference (AMRC) 2015, Universiti Sains Malaysia, Pulau Pinang, Malaysia.
  13. Kapur, P.K., Chanda, U. and Kumar, V. (2010) “Optimal Allocation of Testing Effort: A   Control   Theory   Approach”,   Proceeding   of   the 4th   National   Conference; INDIACom-2010, Computing For Nation Development held during February 25 - 26, 2010 at Bharati Vidyapeeth’s Institute of Computer Applications and Management, New Delhi, 425-430.
  14. Kapur, P.K., Chanda, U., Tandon, A. and Anand S. (2010) “Innovation Diffusion of Successive   Generations   of   High   Technology   Product”,   Proceedings   of 2nd International Conference on Reliability, Safety and Hazard, 505-510 (IEEE). 

Publications

  1. Parthasarathy PD, Ishaan Kapoor, Swaroop Joshi and Sujith Thomas. (2024). Influence of Personality Traits on Plagiarism Through Collusion in Programming Assignments. 20th ACM Conference on International Computing Education Research (ICER). CORE: A. [WWW]
  2. Suhas Ankalkhope, Sandeep Jose and Sujith Thomas. (2024). Probe maps for the exploration of localized metastable states and prediction of peak load-carrying capacity of axially compressed cylindrical shells. Thin-Walled Structures. Scimago : Q1, SJR '22 : 1.43, SNIP '22 : 1.97 . [WWW]
  3. Sujith Thomas and Narayanan Srinivasan. (2022). Accurate knowledge about feature diagnosticities leads to less preference for unidimensional strategy. Journal of Experimental Psychology : Learning, Memory and Cognition. Scimago : Q1, SJR '22 : 1.17, SNIP '22 : 1.22 . [Summary] [PDF] [WWW]
  4. Sujith Thomas and Narayanan Srinivasan. (2022). Integration Across Levels of Information Processing: A Case Study with Visual Category Learning. In: Tripathi, R., Kar, B.R., Pande, N. (Eds.), Towards an Integrative Psychological Science: Issues, Approaches and Applications. Springer, Singapore . (Book chapter) [PDF] [WWW]
  5. Sujith Thomas, Aditya Kapoor and Narayanan Srinivasan. (2021). Supervised category learning: When do participants use a partially diagnostic feature? Proceedings of the 43rd Annual Conference of the Cognitive Science Society (pp. 1313--1319). Cognitive Science Society. CORE: A. [WWW]
  6. Chinmay Chiplunkar, Nishant Gautam, Ishita Mediratta, Andrew Gait, Sujith Thomas, Andrew Rowley, Teresa Serrano-Gotarredona and Basabdatta Sen-Bhattacharya (2021). A reduced-scale cortical network with Izhikevich's neurons on SpiNNaker, The International Joint Conference on Neural Networks. CORE:B.
  7. Sujith Thomas and Narayanan Srinivasan. (2020). Better learning of partially diagnostic features leads to less unidimensional categorization in supervised category learning. In S. Denison., M. Mack, Y. Xu, & B.C. Armstrong (Eds.), Proceedings of the 42nd Annual Conference of the Cognitive Science Society (pp. 3444--3450). Cognitive Science Society. CORE: A. [PDF]
  8. Sujith Thomas, Aditya Kapoor and Narayanan Srinivasan. (2020). Effect of a colour-based descriptor and stimuli presentation mode in unsupervised categorization. In S. Denison., M. Mack, Y. Xu, & B.C. Armstrong (Eds.), Proceedings of the 42nd Annual Conference of the Cognitive Science Society (p. 3531). Cognitive Science Society. CORE: A.
  9. Sujith Thomas and Harish Karnick (2016). Factors Influencing Categorization Strategy in Visual Category Learning. In A. Papafragou, D. Grodner, D. Mirman, & J.C. Trueswell (Eds.), Proceedings of the 38th Annual Conference of the Cognitive Science Society (pp. 596--601). Cognitive Science Society. CORE: A.
  10. Sujith Thomas and Harish Karnick (2015). The effects of category entropy, defining feature saliency and response time limit on category learning. In The Second Annual Conference on Cognitive Science (ACCS), Kanpur, India.
  11. Sujith Thomas and Harish Karnick (2014). Is word generalization for novel concepts modeled by similarity or by formal concepts? In COGNITIVE 2014, The Sixth International Conference on Advanced Cognitive Technologies and Applications, 274--280, Venice, Italy.

Publications

Publication in International Journals

  • Unnikrishnan P.M., Jyoti Tikoria, Agariya, Arun Kumar, “Development and Validation of Business Excellence Framework for Indian Service MSMEs” International Journal of Services, Economics and Management, (Accepted for Publication in December 2022), (Scopus Indexed).
  • Agariya, Arun Kumar, and Jyoti Tikoria, “SERVQUIX: A Tool for Service Quality Measurement in Indian Banks”, International Journal of Services and Operations Management, Accepted for Publication. DOI: 10.1504/IJSOM.2021.10043089, Forthcoming Article, (Scopus Indexed)
  • Unnikrishnan P.M., Jyoti Tikoria, Agariya, Arun Kumar, “Development & Validation of Business Excellence Framework for Indian Manufacturing MSMEs”, International Journal of Business Excellence, Accepted for Publication. DOI: 10.1504/IJBEX.2021.10044723, Forthcoming Article, (Scopus Indexed)
  • Aditi S Divatia., Jyoti., Sunil Lakdawala, “Measuring Business Intelligence & Analytics capability maturity: A study of organizations in India”, International Journal of Business Information Systems, Accepted for Publication. May 12, 2021, DOI: 10.1504/IJBIS.2021.10042131, Forthcoming Article, (Scopus Indexed).
  • Tiwari, P., Bhat, A.K., Tikoria, J. (2022) Mediating Role of Prosocial Motivation in Predicting Social Entrepreneurial Intentions, Journal of Social Entrepreneurship, 2022, 13(1), pp. 118–141 (Scopus Indexed).
  • Bhatia, R., Bhat, A.K., Tikoria, J. (2021) Life insurance purchase behaviour: A systematic review and directions for future research, International Journal of Consumer Studies, 2021, 45(6), pp. 1149–1175, (Scopus Indexed) 
  • Divatia, A.S., Tikoria, J., Lakdawala, S. (2021) Emerging trends and impact of business intelligence & analytics in organizations: Case studies from India, Business Information Review, 2021, 38(1), pp. 40–52. (Scopus Indexed)
  • Mavilavalappil, U.P., Tikoria, J., Agariya, A.K. (2021) Benchmarking business excellence practices: A case-based approach, International Journal of Process Management and Benchmarking, 2021, 11(4), pp. 498–541. (Scopus Indexed)
  • Mishra, B., Tikoria, J. (2021) Impact of ethical leadership on organizational climate and its subsequent influence on job commitment: a study in hospital context, Journal of Management Development, 40(5), pp. 438–452. (Scopus Indexed)
  • Divatia, A.S., Tikoria, J., Lakdawala, S. (2021) Dimensions influencing business intelligence and analytics maturity: A critical analysis, International Journal of Business Information Systems, 2021, 37(2), pp. 200–223. (Scopus Indexed)
  • Tiwari, P., Bhat, A.K., Tikoria, J., Saha, K. (2020) Exploring the factors responsible in predicting entrepreneurial intention among nascent entrepreneurs: A field research, South Asian Journal of Business Studies, 2020, 9(1), pp. 1–18. (Scopus Indexed)
  • Agariya, A.K., Tikoria, J. (2020) Development and validation of service quality scale for Indian telecom sector, International Journal of Services and Operations Management, 2020, 37(4), pp. 477–508. (Scopus Indexed)
  • Unnikrishnan, P.M., Tikoria, J., Agariya, A.K. (2019) TQM to business excellence: A research journey (1985-2018), International Journal of Business Excellence, 2019, 19(3), pp. 323–363. (Scopus Indexed)
  • Tiwari, P., Bhat, A.K., Tikoria, J. (2017) The role of emotional intelligence and self-efficacy on social entrepreneurial attitudes and social entrepreneurial intentions, Journal of Social Entrepreneurship, 2017, 8(2), pp. 165–185. (Scopus Indexed)
  • Tiwari, P., Bhat, A.K., Tikoria, J. (2017) Predictors of social entrepreneurial intention: an empirical study, South Asian Journal of Business Studies, 2017, 6(1), pp. 53–79. (Scopus Indexed)
  • Tikoria, J., Agariya, A.K. (2017) ICT enabled classroom effectiveness scale development and validation: A case of multi-campus university, Knowledge Management and E-Learning, 2017, 9(1), pp. 111–127. (Scopus Indexed)
  • Agariya, A.K., Tikoria, J. (2017) CRM scale development for enhancing business excellence in the Indian airline sector, International Journal of Business Excellence, 2017, 12(4), pp. 537–557. (Scopus Indexed)
  • Agariya, A.K., Shivam, B.K., Murali, S., Tikoria, J. (2016) Hashlearn now: Mobile tutoring in India, Journal of Internet Banking and Commerce, 2016, 21(2), 201. (Scopus Indexed)
  • Jyoti; Banwet, D. K. and Deshmukh, S. G. (2010) Modelling the success factors for National R&D organizations: a Case of India, Journal of Modelling in Management, Vol. 5, No.2, pp. 158-175 (ABDC Listing: C category, Scopus Indexed).
  • Jyoti; Banwet, D. K. and Deshmukh, S. G. (2010) Ranking National R&D Organizations: Data Envelopment Analysis approach, International Journal of Society Systems Science, Vol.2, No. 2, pp. 176-193 (Inderscience publication).
  • Jyoti; Banwet, D. K. and Deshmukh, S. G. (2010) Measuring the Effectiveness of Success Factors: A Case of Government Funded R&D Organizations in India, International Journal of Business Excellence, Vol.3, No. 3, pp. 279-302 (ABDC Listing: C category, Scopus Indexed).
  • Tikoria, J.; Banwet, D. K. and Deshmukh, S. G. (2009) Performance Measurement of National R&D Organizations using Analytic Hierarchy Process: A case of India, International Journal of Innovation and Regional Development, Vol. 1, No. 3, pp. 276-300 (Indexed in ProQuest).
  • Jyoti; Banwet, D. K. and Deshmukh, S. G. (2008) Evaluating Performance of National R&D organizations using integrated DEA-AHP technique, International Journal of Productivity and Performance Management, Vol. 57, No. 5, pp. 370-388 (ABDC Listing: B category, Scopus Indexed).

Publication in National Journals

  • Goel, M. and Tikoria, J., (2016) "Reflections on Business Incubation Processes in a Technical University", Journal of Management & Entrepreneurship, Vol. 10, No. 4, pp. 31 - 40.
  • Tikoria, J.; Banwet, D. K. and Deshmukh, S. G. (2006) Performance Measurement of Government R&D Organizations: A Modified Balanced Scorecard Approach, Journal of Scientific and Industrial Research, Vol. 65, Issue November, pp. 879-886.

Book Chapters

  • Tiwari, P., Bhat, A.K., Tikoria, J. (2020) A field research of nascent social entrepreneurs’ intention formation, in the book titled Career Dynamics in a Global World: Indian and Western Perspectives, 2020, pp. 37–50. (Scopus Indexed)
  • Tiwari, P., Bhat, A.K., Tikoria, J. (2020) The Effect of Emotional Intelligence, Empathy and Perceived Social Pressure on Predicting Social Entrepreneurial Intention: A Field Research, in the book titled Methodological Issues in Social Entrepreneurship Knowledge and Practice, edited by Satyajit Majumdar and Edakkandi Meethal Reji, published by Springer, pp.137-158.
  • Tiwari, P., Bhat, A.K., Tikoria, J. (2018) Factors affecting individual's intention to become a social entrepreneur, in the book titled Social Entrepreneurship and Sustainable Business Models: The Case of India, edited by Anirudh Agarwal and Payal Kumar published by Palgrave Macmillan., pp. 59–98. (Scopus Indexed).
  • Tiwari, P., Bhat, A.K., Tikoria, J. (2017) Relationship between entrepreneurship education and entrepreneurial intentions: A validation study, in the book titled Entrepreneurship Education: Experiments with Curriculum, Pedagogy and Target Groups, edited by Dr. Mathew J Manimala  and Dr. Princy Thomas published by Springer Nature Singapore Pte Ltd., pp. 171–188. (Scopus Indexed).
  • Yadav, N. and Tikoria, J. (2017), “Patanjali Ayurved Limited: A local player posting threat to multinationals”, In Sahay, V. and Sarma, P.R.S. (Eds.), Select Management Cases, ET Cases, Mumbai (pp. 215-228) (Selected for publication in ET Editorial).

Papers in International Conferences

  • Unnikrishnan P.M., Jyoti Tikoria, Agariya, Arun Kumar (2022) “Development of a Strategy Implementation Framework for MSMEs:  A Case Based Approach”, presented at the 12th Conference on Excellence in Research and Education (CERE-2022) held on 3rd-5th June 2022 at IIM Indore. 
  • Unnikrishnan P.M., Jyoti Tikoria, Agariya, Arun Kumar (2021) “Achieving Business Excellence through Inclusive Organizational Practices: A Case Study” at the 8th PAN IIM World Management Conference, organized by IIM Kozhikode from December 16th-18th, 2021.  
  • Unnikrishnan P.M., Jyoti Tikoria, Agariya, Arun Kumar (2020) “Business Excellence in Indian SMEs: Issues and Challenges”, at the International Conclave on ‘Globalizing Indian Thought’ conducted by IIM Kozhikode from 16th to 19th January 2020. 
  • Mishra, B. and Tikoria J. (2019), “Relationship of Moral development and Machiavellianism with Organizational Climate: HRM Implications for Indian Hospitals”. Presented paper in AICAR (Aston India Centre for Applied Research), 2019, 3rd Annual Conference Aston Business School, Birmingham, UK., held on 30-31 August, 2019.
  • Unnikrishnan P.M., Jyoti Tikoria, Agariya, Arun Kumar (2019) “Evidence based and Data driven management practices in manufacturing industry - a case study” at the 3rd International Conference on Evidence Based Management” (ICEBM 2019) held on 1st–2nd February, 2019 at BITS Pilani, Pilani Campus.
  • Mishra, B. and Tikoria, J. (2018), “Effect of ethical leadership on organisational climate and its subsequent influence on commitment: A study of Indian Doctors”. Presented paper in PANIITIMC 2018, Department of Management Studies, IIT Roorkee, held on 30th November – 2nd December, 2018.
  • Unnikrishnan P.M., Jyoti Tikoria, Agariya, Arun Kumar (2018) Presented a research paper titled “Industry 4.0 and its impact on business excellence assessment” at the 6th Biennial Supply Chain Management Conference held on 11th December, 2018 at IIM Bangalore.
  • Unnikrishnan, P.M., Tikoria, J. and Agariya, A. K. (2017) A Review of Select Business Excellence Models, published in conference proceedings of 2nd International Conference on Evidence Based Management (ICEBM 2017) organized at, BITS Pilani on 17th - 18th March 2017, pp. 358 -365.
  • Singhal, A., Agariya, A. K. and Tikoria, J. (2017) Service Quality Scales: Literature Review, published in conference proceedings of 2nd International Conference on Evidence Based Management (ICEBM 2017) organized at, BITS Pilani on 17th - 18th March 2017, pp. 84 - 90.
  • Divatia, A., Lakdawala, S. and Tikoria, J. (2017) Analysis of Maturity Models for Business Intelligence and Analytics, published in conference proceedings of 2nd International Conference on Evidence Based Management (ICEBM 2017) organized at, BITS Pilani on 17th - 18th March 2017, pp. 195 - 201.
  • Satyavageeswaran, P., Agariya, A. K. and Tikoria, J. (2017) Social Marketing and Engagement: A Systematic Review, published in conference proceedings of 2nd International Conference on Evidence Based Management (ICEBM 2017) organized at, BITS Pilani on 17th - 18th March 2017, pp. 99 - 104.
  • Tiwari, P.; Bhat, A. K. and Tikoria, J. (2017) “The effect of emotional intelligence, empathy and perceived social pressure on predicting social entrepreneurial intention” International Conference on Methodological Issues in Social Entrepreneurship Knowledge and Practice, on 18-20 January, 2017 at TISS Mumbai.
  • (Received Excellent Paper Award) Tiwari, P., Bhat, A. K. and Tikoria, J. (2016) “Exploring the Factors Responsible in Predicting Entrepreneurial Intention among Nascent Entrepreneurs: A Field Research” 9th Annual Conference of the Academy of Innovation and Entrepreneurship, organized at University of Sydney, Australia on September 2nd & 3rd, 2016. 
  • Tikoria, J. and Agariya, A. K. (2016) “Sustainable Operations: A Case of Refreshment Shops Operating with Zero Electricity and Minimum Physical Infrastructure”, XX Annual International Conference of Society of Operations Management, December 22-24, 2016 held at ABV- Indian Institute of Information Technology and Management Gwalior.
  • Agariya, A. K. and Tikoria, J. (2016) "E-CRM Scale Development & Validation in Indian E-Commerce Sector", Abstract published in conference proceedings of "Conference on Brand Management 2016", organized by IIT Delhi on 16-17 April, 2016.
  • Goel, M. and Tikoria, J., (2016) "Reflections on Business Incubation Processes in a Technical University", XIME-IEF International Conference on Business Incubation & Acceleration, held at XIME, Bangalore, organized on 21-22nd March 2016.
  • Agariya, A. K. and Tikoria, J. (2015), “Development of Customer Relationship Management Framework for Indian Airline Industry”, 4th Asian Management Research and Case Conference, organized by Universiti Sains Malaysia, Malaysia on 10-11 January, 2015.
  • Tiwari, P.; Bhat, A. K. and Tikoria, J. (2015) “Relationship between Entrepreneurship Education and entrepreneurial Intentions: A validation study”, ICIER-IIMB International Conference on Entrepreneurship Education and Training: Design, Delivery and Effectiveness organized by IIM Bangalore on 29-31 January, 2015.
  • Tiwari, P.; Bhat, A. K. and Tikoria, J. (2015) "Social entrepreneurship: Rise of New hybrid sector", Eleventh Biennial Conference on Entrepreneurship, organized by Entrepreneurship Development Institute of India, Ahemdabad on 18- 20 February 2015.
  • Gupta, N.; Mehta, D. and Tikoria, J. (2015) "Impact of Information Technology on Human Resource Management: An Exploratory Research on select Indian Banks", International Conference on Evidence Based Management (ICEBM 2015), organized by BITS Pilani on 20-21 March 2015.
  • Tiwari, P.; Bhat, A. K. and Tikoria, J. (2013), “Entrepreneurial Intention Models: A Literature Review” in the Eleventh AIMS International Conference jointly organized by Institute of Management Technology, Ghaziabad (IMT-Ghaziabad) and the Association of Indian Management Scholars (AIMS) at IMT Ghaziabad Campus on 21-24 December 2013.
  • Tiwari, P.; Bhat, A. K. and Tikoria, J. (2013) “Review of Social Entrepreneurship and Future Research Agenda” Tenth AIMS International Conference jointly organized by Indian Institute of Management, Bangalore (IIM-B) and the Association of Indian Management Scholars (AIMS) at IIM Bangalore Campus on 6-9 January, 2013. 
  • Tiwari, P.; Bhat, A. K. and Tikoria, J. (2013) “Review Paper on Examining the Role of Factors Affecting Social Entrepreneurship Intention”, Tenth Biennial Conference on Entrepreneurship, organized by Entrepreneurship Development Institute, Ahmadabad on 20-22 February, 2013.
  • Verma, S. and Jyoti (2010) Balanced Scorecard for Performance Evaluation of Educational University/Institute - A Conceptual Framework, presented a in absentia in 2nd International Conference on Innovative Practices in Management & Information Technology for Excellence, organized by Maharaja Agrasen Institute of Management & Technology, Jagadhri, India on 8th May 2010.
  • Deshmukh, S. G.; Shukla, A. C.; Jyoti and Tyagi, B. (2009) Internal Supply Chain of Indian Railways: A Case of CONCOR, Published in conference proceedings of International GLOGIFT conference to be held at NITIE, Mumbai on 14 November, 2009.
  • Tikoria, J.; Banwet, D. K. and Deshmukh, S. G. (2006) Evaluating Performance of R&D Organization using Data Envelopment Analysis (DEA): A Conceptual Model, participated and published in the conference proceedings of R&D Management Conference on Innovation: A Route to Competitiveness in Global Economy, organized by Council of Scientific & Industrial Research (CSIR), New Delhi, on 3-4 March 2006.
  • Jyoti; Banwet, D. K. and Deshmukh S. G. (2004) Select Issues in R&D Management, Presented and published in the proceedings of the Fourth Global Conference on Flexible Systems Management, organized by Institute of Technology Management, DRDO, Ministry of Defence, Landour Cantt., Mussoorie, held on 26-29 December, 2004, pp. 161-176.
  • Tikoria S.; Tikoria V. and Tikoria, J. (2003) Multi Fuel Engine Technology and Pollution Control, published in the Conference proceedings of International Conference on Management of Research and Development (ICMARD 2003) held at IIT, Delhi, pp. 416-420.

Articles in magazines

  • Jyoti (2009) Predicting the Seventh Generation of R&D: From Business-oriented R&D to Green-oriented R&D, Explorer Magazine, Department of Mechanical Engineering, Indian Institute of Technology Delhi.
  • Tikoria, J. and Shukla, A. C. (2008) Some of the new technological initiatives in aviation Industry, published in CHAOS Magazine, Department of Management Studies, Indian Institute of Technology Delhi.

Publications

Papers in Journals

  1. Shilpi Kalwani, Jayashree Mahesh & Anil K. Bhat (2021). Ostracism and Belongingness: Are They Contrary Forms of Potential Antecedents? Empirical Economics Letters, Vol.  20 Issue: 43, pp 21-40 (ABDC, ERA)
  2. Mahesh, J., Bhat, A. K., & Suresh, R. (2021). Are Gen Z Values the New Disruptor for Future Educational Institutions? Journal of Higher Education Theory and Practice21(12). https://doi.org/10.33423/jhetp.v21i12.4704 (Scopus, SCI)
  3. Kalwani, S., Mahesh, J., & Bhat, A.K. (2021). Are COVID Survived Workplaces transforming into Zen Workplaces? BVIMSR Journal of Management Research. 13 (2) 54-66
  4. Kalwani, S., Mahesh, J. (2020). Trends in organizational behavior: A systematic review and research directions. Journal of Business and Management, 26(1), March, 40-78. DOI: 10.6347/JBM.202003_26 (1).0003. (ABDC)
  5. Mahesh, J., Bhat. A. (2018), 'Convergence of Management Practices in India's IT Sector with an a priori validation'. Journal of Asia Business Studies, Vol. 12 Issue: 4, pp.402-421, (Scopus, ABDC, Q1 Scimago)
  6. Mahesh, J., Bhat, A. (2015), 'Proposed Framework for Identifying “Indian” Management Practices'. International Journal of Research in Management & Social Science, 3 (1- IV): 21- 26
  7. Amonker, N., Mahesh J. (2014), 'Impact of National Culture on Factors Affecting Product Design’. International Journal of Business and Administration Research Review, 3(6):109-116
  8. Bhat A.K., Mahesh J., (2008) 'Indian Management Philosophy – An Unexplored Territory Whose Time Has Come'. Productivity Promotion. 11(40):18-25.

Book Chapters

  1. Shipra Pandey & Jayashree Mahesh. (2023), “Work Environment: A Review of Established Scales from 50 Years of Literature.” In Sharma S, Chanda C and Goyal P (Eds), Handbook Evidence-Based Management Practice in Business, Selected papers from International Conference Evidence-Based Management, pp. 253–263. Routledge. DOI: 10.4324/9781003415725-31
  2. A Naga Ramani & Jayashree Mahesh, (2023).” Changing Paradigms in Training Methods: A Bibliometric Review”In Sharma S, Chanda C and Goyal P (Eds), Handbook Evidence-Based Management Practice in Business, Selected papers from International Conference Evidence-Based Management, pp. 189–196. Routledge. DOI: 10.4324/9781003415725-31(Best paper award in HR Track)

Conference Proceedings

  1. Suri Babu Kuchimanchi & Jayashree Mahesh (2023). “A Study of Role of Mentoring in The Development of Women Leaders in Corporates, In Order to Address Gender Inequity at Top” E- Conference Proceedings of the 10th International HR Conference - 'Diversity, Equity, and Inclusion’ (DEI), K J Somaiya Institute of Management, Mumbai, pp 571-584. Perfect Solutions & Stationery, Mumbai, ISBN No 978-81-957782-3-2
  2. Pandey, S., Mahesh, J. (2023)." Well-being and Employee Performance- Research Insights from a Bibliometric and Thematic Perspective." Digital Economy Post Covid- 19 Era- Proceedings of 8th Indian Academy of Management (INDAM23), Springer. [Scopus Proceeding– Accepted and in Print for Special Journal Issue]
  3. Jayashree Mahesh, Anil K. Bhat & Ramya Suresh, (2021), “Mapping Pedagogical Tools to Cognitive Processes for Effective Learning Design for Post-Millennials”. Proceedings of the International Conference on Best Innovative Teaching Strategies (ICON-BITS), BITS Pilani, Macmillan Education India Private Limited, India, pp.31-36.
  4. NV Sai Sreya & Jayashree Mahesh, (2021), “Education of Generation Z: A Systematic Review and Research Directions”. Proceedings of the International Conference on Best Innovative Teaching Strategies (ICON-BITS), BITS Pilani, Macmillan Education India Private Limited, India, pp.344-348.
  5. Shilpi Kalwani, Jayashree Mahesh & Anil Kumar Bhat. (2021)." Creating Mindfulness at Stressed Environment Work-Places through a Self-Training Intervention"Academy of Management Proceedings 26 Jul 2021https://doi.org/10.5465/AMBPP.2021.14857abstract 
  6. Bhat, A. & Mahesh, J. (2018). Understanding the Gap in the ‘Umwelts’ of Higher Education: The Perceptual Antecedents of Faculty and Student Satisfaction. In: British Academy of Management (BAM) 2018. [online] Available at: http://conference.bam.ac.uk/BAM2018/htdocs/conference_papers.php?track_name=Knowledge%20and%20Learning#Developmental%20Papers [Accessed 11 Sep. 2018].
  7. Jayashree Mahesh & Anil Kumar Bhat. (2016)."How Global is ""Indian"" Management? A Study of Management Practices in Indian I.T. Sector"Academy of Management Proceedings 2016 2016:1 15163 Abstract
  8. Mahesh, J., & Bhat, A. (2012), '''Indian'' Management Practices: A Chimera or Reality’. Proceedings of the International Conference on Management in the New World Order - Concepts and Practices from India, Indian Institute of Management, Ranchi, McGraw Hill, India, pp. 452-465. (Best Paper Award)

Conference Presentations

  1. Pandey, S., & Mahesh, J. ‘Identifying antecedents and outcomes of employee well-being and its implications during Covid times [Conference session]’. Paper presented at the 6th International Conference Wellbeing at Work 2022 from June 13-15, 2022 (online). https://www.waw2022.pl/images/book_of_abstracts_2022.pdf
  2. Jayashree Mahesh & Anil K. Bhat, ‘An Interpretive-Research Insight into Values-Schema of Generation Z and its Implication for Employee Engagement’. Paper presented at the 6th Biennial Conference of the Indian Academy of Management (INDAM) – Architecting Indian Management Scholarship in The Era of Disruption, held at Indian Institute of Management Tiruchirappalli, January 2-4, 2020.
  3. Mahesh, Jayashree & Bhat, Anil, ‘Educating Generation Z- An Ethnographic Insight for Managing and Organizing Higher Education Institutions in the Indian Context’. Paper presented at the 2nd Conference of Aston India Centre for Applied Research (AICAR), held at Aston University, Birmingham from August 31 – September 1, 2018. (Best Paper Award)
  4. Mahesh, Jayashree & Bhat, Anil “Culture specific Indian management practices or Universal management practices: A peep into the black box of Indian IT Companies” presented at the Academy of International Business (AIB)-INDIA Chapter Conference held at Shimla on 9th - 11th April 2018.
  5. Mahesh, Jayashree & Bhat, Anil, ' Value Creation Framework for a Higher Educational Institution: A Case of a Reputed Technology University in India'. Paper presented at the 5th Biennial Conference of the Indian Academy of Management (INDAM), held at Indian Institute of Management, Indore from December 18-20, 2017.
  6. Mahesh, Jayashree & Bhat, Anil, 'Convergence of Management Practices in India's IT Sector - The Mirage and Myopia of Managerial Perception'. Paper presented at the Inaugural Conference of Aston India Centre for Applied Research (AICAR), held at Aston University, Birmingham from September 15 -16, 2017.
  7. Mahesh, Jayashree & Bhat, Anil, 'How Global is "Indian" Management - A Study of Management Practices in the Indian I.T Sector'. Paper presented at the 76 Academy of Management Annual Meeting, held at Anaheim, California from August 5-9, 2016. 
  8. Mahesh, Jayashree'Exploring the Paradox of Globalization of 'Indian' Management: A Qualitative Research Study’. Paper presented at the PAN IIM World Management Conference held at IIM Kozhikode from November 5-8, 2014.
  9. Mahesh, JayashreeResearch Design Proposal for an Empirical Investigation of ‘Indian’ Management Practices'Paper presented at the 3rd Doctoral Colloquium held at IIM Ahmedabad from January 8-9, 2010.
  10. Mahesh, Jayashree'Proposed Framework for Identifying “Indian” Management Practices'. Paper presented at the Conference on Asian Management Practices: People, Strategies and Evolution March 19-21, 2009, IIM(L), Noida Campus

Case Study Publications

  1. Dutta, N., Bhat, A., Bhattacharya, K. S., & Mahesh, J., (2019). Attracting Students to the Classroom with Innovative Pedagogies’. South Asian Journal of Business and Management Cases, 8(3), 241–250. https://doi.org/10.1177/2277977919860275
  2. Sudarsan, A., Raghunathan, R., Mahesh, J., (2013). Case Study - Seth Project Consultants Ltd: Striving for Growth. Indira Management Review. VII (1):70-83
  3. Sudarsan, A., Mahesh, J., (2013). Case Analysis - Turnaround at TASS. Indira Management Review. VII (2):49-52

International Journal Papers

  1. Saket Verma, Kumar K, Das LM, Kaushik SC. Effect of Hydrogen Enrichment Strategy on Performance and Emission Features of Biodiesel-Biogas Dual Fuel Engine Using Simulation and Experimental Analyses. ASME, Journal of Energy Resources Technology 2020, Vol. -, pp. 1-8. https://doi.org/10.1115/1.4049179
  2. Kumar K, Alam M, Verma S*, Dutta V. Analysis of metal hydride storage on the basis of thermophysical properties and its application in microgrid. Energy Conversion and Management 2020, Vol. 222, pp. 113217. https://doi.org/10.1016/j.enconman.2020.113217
  3. Kumar K, Alam M, Verma S, Dutta V. Effect of hysteresis band control strategy on energy efficiency and durability of solar-hydrogen storage based microgrid in partial cloudy condition. Journal of Energy Storage 2020, Vol.32, pp. 101936https://doi.org/10.1016/j.est.2020.101936
  4. Alam M, Kumar K, Verma S, Dutta V. Renewable sources based DC microgrid using hydrogen energy storage: Modelling and experimental analysis. Sustainable Energy Technologies and Assessments 2020, Vol 42, pp. 100840. https://doi.org/10.1016/j.seta.2020.100840
  5. Saket Verma, Abhishek Suman, L M Das, S C Kaushik, S K Tyagi. A renewable pathway towards increased utilization of hydrogen in diesel engines. International Journal of Hydrogen Energy 2020, Vol. 45, pp. 5577-5587. https://doi.org/10.1016/j.ijhydene.2019.05.213
  6. Saket Verma, L M Das, S C Kaushik, S S Bhatti. The effects of compression ratio and EGR on the performance and emission characteristics of diesel-biogas dual fuel engine. Applied Thermal Engineering 2019, Vol. 150, pp. 1090-1103https://doi.org/10.1016/j.applthermaleng.2019.01.080
  7. S S Bhatti, Saket Verma, S K Tyagi. Energy and exergy based performance evaluation of variable compression ratio spark ignition engine based on experimental work. Thermal Science and Engineering Progress 2018, Vol. 9, pp. 332-339. https://doi.org/10.1016/j.tsep.2018.12.006
  8. Saket Verma, L M Das, S C Kaushik, S S Bhatti. An experimental investigation on biodiesel-biogas dual fuel engine based on energy and exergy analyses. International Journal of Exergy 2018, Vol. 26(1/2), pp. 58–76. https://doi.org/10.1504/IJEX.2018.092505
  9. Saket Verma and L M Das. Spark Advance Modeling of Hydrogen-Fueled Spark Ignition Engines Using Combustion Descriptors. ASME. J. Eng. Gas Turbines Power 2018, Vol. 140(8), pp. 081501-081501-11. doi:10.1115/1.4038798.
  10. Saket Verma, L M Das, S C Kaushik, S K Tyagi. An experimental investigation of exergetic performance and emission characteristics of hydrogen supplemented biogas-diesel dual fuel engine. International Journal of Hydrogen Energy 2018, Vol. 43(4), pp. 2452-2468. https://doi.org/10.1016/j.ijhydene.2017.12.032
  1. Saket Verma, L M Das, S S Bhatti, S C Kaushik. A comparative exergetic performance and emission analysis of pilot diesel dual-fuel engine with biogas, CNG and hydrogen as main fuels. Energy Conversion and Management 2017, Vol. 151, pp. 764–777https://doi.org/10.1016/j.enconman.2017.01.066
  1. Saket Verma, L M Das, S C Kaushik. Effects of varying composition of biogas on performance and emission characteristics of compression ignition engine using exergy analysis. Energy Conversion and Management 2017, Vol. 138, pp. 346-359https://doi.org/10.1016/j.enconman.2017.09.035

Book chapters

  1. Saket Verma, S C Kaushik, L M Das. Exergy Analysis of Hydrogen-Fueled Spark Ignition Engine Based on Numerical Investigations. Combustion for Power Generation and Transportation 2017, pp. 297-316, Springer, Singapore. Online ISBN: 978-981-10-3785-6. https://doi.org/10.1007/978-981-10-3785-6_14

International conference proceedings

  1. Saket Verma, K. Kumar, L.M. Das, S.C. Kaushik, S.K. Tyagi. Experimental Analysis on the Effect of Hydrogen Supply Systems in a Diesel Dual Fuel Engine. Journal of Energy and Environmental Sustainability, 7 (2019), pp. 59-62. 3rd International Conference on Sustainable Energy and Environmental Challenges (SEEC) from December 18-21, 2018 in Roorkee, India.
  2. Saket Verma, L.M. Das, S.C. Kaushik and S.K. Tyagi. An Experimental Comparison of Enriched Biogas and CNG on Dual Fuel Operation of a Diesel Engine. IOP Conf. Ser.: Earth Environ. Sci.264 (2019) 012004. 3rd International Conference on Environmental Engineering and Sustainable Development (CEESD) 2018 from Nov.30-Dec. 2, 2018 in Penang, Malaysia. ISSN: 1755-1315. doi:10.1088/1755-1315/264/1/012004
  3. Saket Verma, S. C. Kaushik, L. M. Das. Development and Characterisation of Biodiesel-Biogas Dual Fuel Engine. International Journal of Engineering Technology Science and Research, 2017, 4:6; pp. 80-87. 6th International Conference on Engineering Technology, Science and management Innovation (ICETSMI) June 11, 2017in New Delhi, India. ISSN: 2394–3386
  4.  Saket Verma, S. C. Kaushik, L. M. Das. Energy and exergy analysis of biodiesel-biogas dual-fuel engine. 9th International Exergy, Energy and Environment Symposium (IEEES-9), pp. 986-993. May 14-17, 2017, Split, Croatia. ISBN:978-953-290-069-9

Publications

REFEREED JOURNAL ARTICLES/CASES/BOOK CHAPTERS 

 [2012 Onwards]
  1. Khublani Prateek, Anil Bhat & Jyoti Tikoria" Challenges & Issues Faced By Pharmaceutical Companies From Supply Chain Management Perspective : A Systematic Literature Review" Accepted for publication in Int. J. of Industrial and Systems Engineering [Scopus]
  2. Maj. Gen. Chander Sheikhar and Anil Bhat ‘Takeaways for India from Defence Indigenisation of Other Countries’  'The Material Manager' Journal published by College of Materials Management, Jabalpur (ISSN No 2582-0524) Volume VIII, Issue-2, Dec 2023.
  3. Maj. Gen. Chander Sheikhar and Anil Bhat ‘A Literature Review based Approach to Identify Strengths, Challenges, Opportunities & Threats of Indigenization in Defense Sector in India’ Defence Management Journal – Dur Drishti published by College of Defence Management, Secunderabad (ISSN No 0976-7347) Volume XXIII, Issue-1, Jan 2024.
  4. Bhat, D. A., Chanda, U., & Bhat, A. K. (2023). Market discipline and the risk-taking behaviour of banks in India. International Journal of Finance & Economics, 1– 16. https://doi.org/10.1002/ijfe.2861 [Scopus,ABDC]
  5. Rana, A., Bhat, A. K., & Rani, L. (2022). E-Marketing Mix Variables to Create Online Brand Equity in the Indian Context. International Journal of E-Business Research (IJEBR), 18(1), 1-25. http://doi.org/10.4018/IJEBR.309394 [Scopus]
  6. Preeti Tiwari, Anil K. Bhat & Jyoti Tikoria (2022) Mediating Role of Prosocial Motivation in Predicting Social Entrepreneurial Intentions, Journal of Social Entrepreneurship, 13:1, 118-141,  DOI: 10.1080/19420676.2020.1755993 [ABDC,Scopus]
  7. Mahesh, J., Anil K Bhat, & Suresh, R. (2021). 'Are Gen Z Values the New Disruptor for Future Educational Institutions? 'Journal of Higher Education Theory and Practice21(12) [Scopus]
  8. Bhatia, Ritika, Anil K Bhat & Jyoti  Tikoria (2021)"Life Insurance Purchase Behavior: A Systematic Review and Directions for Future Research" Accepted in International Journal of Consumer Studies [ABDC'A',Scopus]
  9. Shilpi Kalwani, Jayashree Mahesh & Anil K. Bhat  (2021).Ostracism and Belongingness: Are They Contrary Forms of Potential Antecedents? Empirical Economics Letters, Vol.  20 Special Issue: 3, Oct. 2021, pp 21-40 [ABDC]
  10. Dutta, N. and Bhat, A. (2021) ‘Reviewing Current State of Research on the Use of Social Media in Higher Education.’ Research Review: International Journal of Multidisciplinary. 6(5): 70-77. ISSN: 2455-3085
  11. Shilpi Kalwani, Jayashree Mahesh & Anil K. Bhat (2021) ‘Are COVID Survived Workplaces Transforming into Zen Workplaces?’ BVIMSR journal of management research, Vol 13, I 2, B 54-E 66
  12. DA Bhat, U Chanda, AK Bhat  (2020) “ Does Firm Size Influence Leverage" Accepted in   Global Business Review [ABDC,Scopus]
  13. Bhatia Ritika &Anil.K.Bhat (2020)"From service culture to customer behavioral loyalty: An organizing framework for Service-Dominant Orientation"  Accepted in International Journal of Services Sciences[ABDC]
  14. Tiwari P., Bhat A.K., Jyoti (2020). “A Field Research of Nascent Social Entrepreneur’s Intention Formation in India”  in: Premarajan R.K, Anneleen Forrier and Michael B. Arthur (eds) Career Dynamics in a Global World: Indian and Western Perspectives published by Edward Elgar Publishing Ltd.(In Press)
  15. Tiwari P., Bhat A.K., Jyoti (2020) The Effect of Emotional Intelligence, Empathy and Perceived Social Pressure on Predicting Social Entrepreneurial Intention: A Field Research. In: Majumdar S., Reji E. (eds) Methodological Issues in Social Entrepreneurship Knowledge and Practice. Springer Proceedings in Business and Economics. Springer, Singapore
  16. Nirankush Dutta ,Ayush Verma ,Anil Bhat (2019) "Analysis of Factors Influencing Negative e-Word of Mouth in Online Social Media Marketing”2019. Proceedings of the  3rd International Conference on Software and e-Business. ACM, New York,  USA.[Scopus]
  17. Tiwari P., Anil.K.Bhat, Jyoti Tikoria and Kaustav Saha (2019), “ Exploring the factors responsible in predicting entrepreneurial intention among nascent entrepreneurs: A field research” South Asian Journal of Business Studies [Scopus, ABDC] 
  18. Dutta, N., Bhat, Anil, Bhattacharya, K.S., & Mahesh, J (2019). “Attracting Students to the Class-room with Innovative Pedagogies”. Accepted for publication in South Asian Journal of Business and Management Cases.[Scopus]. 
  19. Sharda  Nikita and Anil. K. Bhat (2019)"Role of Consumer Vanity and the Mediating Effect of Brand Consciousness in Luxury Consumption"  Accepted for publication in Journal of Product & Brand Management Vol. 28 No. 7, pp. 800-81   [ABDC 'A', Scopus]. 
  20. Rana, A., Bhat, A., & Rani, L. (2019) The cognitive structure of online brand choice: An exploratory study. Developments in Marketing Science: Proceedings of the Academy of Marketing Science (Springer International publishing) – ISBN 978-3-319-76429-0 [Chapter 142]
  21. Sharda Nikita and Anil. K. Bhat (2018)"Austerity to materialism and brand consciousness: Luxury consumption in India"  Vol. 22 No. 2, pp. 223-239  Journal of Fashion Marketing and Management: An International Journal [ABDC, Scopus]
  22. Bhat, Anil, and Dutta, N. (2018) Salient Role and Centrality of Trust in Social Media Marketing, in Bandyopadhyay, S.  and Rishi, B. (Eds.), Contemporary Issues in Social Media Marketing, Routledge, 1st ed.  ISBN: 978-11-38679-17-7
  23. Jayashree Mahesh and  Anil Bhat (2018)  'Convergence of Management Practices in India’s IT Sector with an a priori validation' ;Volume 12 Issue 4 ,Journal of Asia Business Studies[ABDC,Scopus
  24. Preeti Tiwari, A. Bhat, and Tikoria,J (2018) Factors Affecting Individual's Intention to Become a Social Entrepreneur” titled Social Entrepreneurship and Sustainable Business Models in India (Anirudh Agrawal and Payal Kumar, Eds.) published by Palgrave Macmillan.
  25. Tiwari, P., Bhat, A. K., and Tikoria, J. (2017), “The role of emotional intelligence and self-efficacy on social entrepreneurial attitudes and social entrepreneurial intentions”Journal of Social Entrepreneurship, 8(2), 165-185. [Scopus
  26. Imlak Shaikh, Satyendra Kr. Sharma, Anil K. Bhat, (2017) Guest editorial", Journal of Modelling in Management, Vol. 12 Issue: 4, pp.578-582 [ABDC,Scopus]
  27. Dutta, N. and Anil Bhat (2017)  ‘Effect  of  Perceived  Relational Characteristics of Online Social Network on e-WOM and Purchase Intention: Exploring Mediating Role of Trust’ 13(4): pp 499-529. International Journal of Web Based Community[ABDC,Scopus]
  28. Preeti Tiwari , Anil K. Bhat , Jyoti Tikoria (2017)“An Empirical Analysis of the Factors Affecting Social Entrepreneurial Intentions” Journal of Global Entrepreneurship Research (Thomson Reuters Emerging Sources Citation Index) December 2017, 7:9
  29. Preeti Tiwari, Anil K. Bhat, Jyoti Tikoria, (2017) "Predictors of social entrepreneurial intention: an empirical study", South Asian Journal of Business Studies, Vol. 6Issue: 1, pp.53-79[ABDC, Scopus]
  30. Anil Bhat and Nirankush Dutta (2017)‘New Product Testing Through Experimental Design: The Case of Varn International Ltd.’ The Case Center (Case Reference no.. 517-0029-1)
  31.  Dutta, N., & Bhat, A. (2017). Smart Configuration for a Successful Smartphone. The Case Centre  (Case reference no. 517-0076-1)   
  32. Dutta, N., & Bhat, A. (2017). Using MDS to Reclaim Lost Position to Cheap Chinese Smartphone Brands. The Case Centre (Case Reference No. 517-0061-1).
  33.  Nirankush Dutta and Anil Bhat (2017)‘Dangal : Cinematic Representation of Competitive Marketing Strategy’ Prabandhan: Indian Journal of Management , Volume 10, Issue 8, August 2017[Scopus]
  34. Tiwari, P.; Bhat, A. and Tikoria (2017), J Chapter 9 edited volume (book) titled Entrepreneurship Education: Experiments with Curriculum, Pedagogy and Target Groups (Manimala and Thomas, Eds.), published by Springer International Publishing, AG (Springer Nature), 2017.
  35. Satyendra Sharma, Anil Bhat, Vinod Kumar and Aayushi Agarwal (2017), "Supply chain Risk Management: A Path Analysis Model", International Journal of Information Systems and Supply Chain Management, Vol.10, No.2, Accepted.[ABDC,Scopus]
  36. Udayan Chanda, Anil Bhat, Satyendra Kumar Sharma and Amit Burdhan,(2016) ‘Guest Editorial Preface-Special issue on Evidence Based Management for Services Sector’ International Journal of Information Systems in Service Sector, Vol 8, No.4, pp iv-ix,Oct-Dec 2016[Scopus]
  37. Dutta, N., & Bhat, A. (2016). Exploration of Factors Affecting Initial Trust in Online Social Network. In V. Sahay & S. Prashar (Eds.), Social Media for Business (1st ed.): 137–144. New Delhi: Excel India Publishers. ISBN: 978-93-85777-40-0
  38. Nirankush Datta and Anil K. Bhat (2016)"Role of Trust on Perceived Store Characteristics and Consumer Behavioural Outcome in the Context of Online Social Media Marketing".  in Indore Management Journal(IIM Indore) 
  39. Nirankush Dutta,  and Anil K. Bhat (2016), “Exploring the Effect of Store Characteristics and Interpersonal Trust on Purchase Intention in the Context of Online Social Media Marketing”.  Journal of Internet Commerce,15(3):239-273,[Scopus]
  40. Satyendra K Sharma and Anil Bhat (2016)“Risk mitigation in automotive supply chain: an empirical exploration of enablers to implement supply chain risk management”  Global Business Review, 17(4) Issue July-August 2016,[ABDC,Scopus]
  41. Nirankush Datta &  Anil K. Bhat (2016)“FirstCry.com: Fighting to Lead the Giant Baby-Care Product Market Online” International Journal of Case Studies in Management. HEC Montreal [Harvard Business Publishing for Educators Product#HEC141-PDF-ENG]
  42. Nirankush Dutta and Anil K. Bhat (2015),  ‘Zivame: Branding Options for an Online Lingerie Retailer’: Ivey Publishing [[Harvard Business Publishing for Educators  Product #:W15261-PDF-ENG]
  43. Anil Bhat (2015) ‘Evidence-Based Management: The Future?’ Indian Management -The Journal of The All India Management Association, June Issue, pp 52-59
  44. Rana Arunima, Anil Bhat & Leela Rani (2015)"A Classificatory Scheme for Antecedents of the Sources of ‘Online Brand Equity’" Journal of Research in Interactive Marketing ,Vol.9,Iss 4,pp 262-298   [ABDC, Scopus]
  45. Anil Bhat and Sarvesh Satija (2015) “Sustainability and Competitive Strategy: An Indian Context  " in Business Sustainability –Challenges and Issues (Ed.), pp 112-137, Academic Reference Series, Bloomsbury Publications
  46. Anil Bhat and Saumya Agrawal (2015) “Reputation of Financial Services Companies: A Factor Analytic Investigation” The IUP Journal of Corporate Governance, Vol. XIV No.1, Jan.2015, pp 7-39 [ABDC]
  47. Nirankush Dutta , Anil K. Bhat (2014) , "Flipkart: Journey of an Indian e-commerce start-up", Emerald Emerging Markets Case Studies
  48. Rohit Gupta and Anil Bhat (2014)“ How successful is the Indian Banking System in upgrading to Basel III? – Some Exploratory Evidence” The IUP Journal of Bank Management ,Vol XIII, No. 4,pp7-19
  49. Sharma, S.K. and Bhat, Anil (2014), "Supply Chain Risk Assessment Tools and Techniques in the Automobile Industry: A SurveyThe IUP Journal of Supply Chain Management ,Vol. XI, No.1, pp 67-76
  50. Sharma, S.K. and Bhat, Anil. (2014), "Supply chain risks: Development of a model and empirical evidence”  International Journal of Applied Management Science, Vol. 6,No.1,pp 45-64[ABDC,Scopus]
  51. Sharma, S.K. and Bhat, Anil. (2014), "Supply chain risk management strategies in Indian automobile Industry: A Cluster analysis approach", Benchmarking: An International Journal,Vol.21,No.6[ABDC,Scopus]
  52. Sharma, S.K. and Bhat, Anil. (2014), "Modelling supply chain agility enablers using ISM", Journal of Modelling in Management, Vol.9, issue 2 (Highly Commended paper in the 2015 Emerald Literati Network Awards for Excellence.)[ABDC,Scopus]
  53. Matai, Rajesh and Bhat, Anil (2013)“Underlying Dimensions of Purchase Decision Process for Consumer Durables: A Confirmation of Customer–Value Hierarchy Model” Indian Journal of Marketing , Volume 43, No.5,pp. 16-23[ Scopus]
  54. Sharma, S.K. and Bhat, Anil (2013) “An Empirical exploration of supply chain design factors and studying their influence on supply chain performance", International Journal of Business Performance and Supply Chain Modeling ,Vol. 5, No.3,pp 237-257 [Scopus]
  55. Sharma, S.K. and Bhat, Anil (2012) "Potential barriers in supply chain risk management in Indian automobile industry", International Journal of Business Continuity and risk Management, Vol. 3, No.3 , pp. 206-220(Scopus)
  56. Sanjana R. Bhat and Bhat, Anil (2012) ' The Relationship of Attitude Constructs in Behaviour Adoption towards Alleviation of Nutritional AnaemiaInternational Journal of Behavioural and Healthcare Research,Vol.3,No.3/4,pp167-177
  57. Bhat, Anil (2012) " Price-Quality Trade-off: An Integrative Review of Theory and its Implication for Marketing Practice", AIMS International Journal of Management, Vol.6, No.2, pp. 153-166
  58. Bhat, Anil (2012) " Blog Popularity and Activity on Social Media: An Empirical Research” Indian Journal of Marketing, Vol.42, and No.5 pp. 10-18[Scopus]
  59. Sharma, S.K. and Bhat, Anil (2012) “Identification and assessment of supply chain risk: development of AHP model for supply chain risk prioritization” International Journal of Agile Systems and Management, Vol. 5, No. 4, pp 350-369 [ABDC,Scopus]
  60. Sharma, S.K. and Bhat, Anil (2012) ," An Empirical investigation of the Contribution of Supply chain design characteristics on supply chain risks in Indian Automobile Industry", International Journal of Business Continuity and risk Management,  Vol.3, No.2, pp. 117-135(Scopus)

 

REFEREED CONFERENCE PAPERS [2012 Onwards]

  1. Anupama Tyagi & Anil KBhat ‘Mediating Role of Work Place Isolation on the Relationship between Perceived Proximity and Social Identity in the Context of Virtual Work Environments’ Accepted for presentation at INDAM 24 conference at Goa Institute of Management, Goa, India during 10th Jan-13th Jan. 2024
  2. Bhatia, Ritika, Anil K Bhat & Jyoti  Tikoria"Effect of Financial Literacy Intervention on Attribute-Framing Effect in the Context of Life Insurance Product" Accepted for presentation at the Behavioural Science in Management (BSIM) 2023 Conference being organized by the NSE Centre for Behavioral Science, Indian Institute of Management Ahmedabad during April 04 – 05, 2023. 
  3. Bhatia, Ritika, Anil K Bhat & Jyoti  Tikoria"Policyholders’ Beliefs Responsible for Life Insurance Lapse Behavior: A Qualitative Study" Accepted for  presentation at the Behavioral Science in Management (BSIM) 2023 Conference being organized by the NSE Centre for Behavioral Science, Indian Institute of Management Ahmedabad during April 04 – 05, 2023
  4. Shilpi Kalwani,Jayashree Mahesh & Anil  K Bhat,  "Creating Mindfulness at Stressed Environment Work-Places through a Self-Training Intervention", has been accepted for presentation at the 81st Annual Meeting of the Academy of Management (AOM) 29 July - 4 August 2021.
  5. Jayashree Mahesh, Anil K. Bhat & Ramya Suresh, “Mapping Pedagogical Tools to Cognitive Processes for Effective Learning Design for Post-Millennials”. Paper accepted for presentation at the International Conference on Best Innovative Teaching Strategies (ICON-BITS) 2021, held at BITS Pilani from July 29-31,2021
  6. Nirankush Dutta, Anil K.Bhat & Nandita Dammur, “A Preliminary Study on the Use of Social Media in Higher Education” Paper accepted for presentation at the International Conference on Best Innovative Teaching Strategies (ICON-BITS) 2021, held at BITS Pilani from July 29-31,2021.
  7. Dutt,N and Bhat, A. 2020. "Use of Social Media in Higher Education: A Systematic Literature Review" in the 4th International Marketing Conference on Marketing, Technology & Society (ICMTS 2020) to be organized by Indian Institute of Management Kozhikode (IIM-K) at IIM-K campus from Apr 17- 19, 2020
  8. Jayashree Mahesh, Anil Bhat "An Interpretive-Research Insight into Values-Schema of Generation Z and its Implication for Employee Engagement” accepted for presentation in the Sixth Biennial Conference of the Indian Academy of Management (INDAM 2020) January 2-4, 2020 at I.I.M Tiruchirappalli.
  9. Nirankush Dutta ,Ayush Verma ,Anil Bhat "Analysis of Factors Influencing Negative e-Word of Mouth in Online Social Media Marketing”, Accepted in the 3rd International Conference on Software and e-Business (ICSEB 2019) to be held in Waseda Unviersity (Nishi-Waseda campus), Tokyo, Japan during December 09-11, 2019.
  10.  Nirankush Dutta and Anil K. Bhat, “Source-Based Trust in Online Social Media Marketing”, Accepted for presentation at Australia and New Zealand Marketing Academy Conference (ANZMAC) hosted by the University of Adelaide, Australia on December 3 - 5, 2018. 
  11. Nirankush Dutta and Anil Bhat. “A Study of the Anomalous Relation Between Pro-Environment Knowledge, Attitude and Behaviour” Accepted for presentation at Nordic-India Business Conference hosted by Stockholm Business School, Stockholm, Sweden on 25-26 October 2018
  12. Anil Bhat & Mahesh, J. “Understanding the Gap in the ‘Umwelts’ of Higher Education: The Perceptual Antecedents of Faculty and Student Satisfaction” accepted for presentation at 32nd annual conference of British Academy of Management (BAM), 4-6 September,2018 at the University of the West of England,U.K.
  13. Amrata Patwa. & Anil Bhat “Conceptual Domain Overlap between Employee Engagement and Employee Creativity: an Empirical Investigation accepted for presentation in 2nd Annual Conference of Aston India Centre for Applied Research. Managing and Organizing in the Emerging Indian Context,31stAugust – 1stSeptember 2018 at Aston Business School, Aston University, Birmingham, U.K
  14. J, Mahesh. & Anil Bhat ‘Educating Generation Z – An Ethnographic Insight for Managing and Organizing Higher Education Institutions in Indian Context'. ‘Accepted for presentation in 2nd Annual Conference of Aston India Centre for Applied Research. Managing and Organizing in the Emerging Indian Context,31stAugust – 1stSeptember 2018 at Aston Business School, Aston University, Birmingham, U.K (Best Innovative Research Paper Award)
  15. Nikita Sharda and Anil Bhat "The Role of Social Comparison and Consumer’s Need for Uniqueness in Explaining the Purchase Intention Towards Luxury Brands" accepted for presentation at the Summer AMA Conference in Boston, M A, USA on August 10-12, 2018.
  16. Mahesh Jayashree & Anil K Bhat “Culture specific Indian management practices or Universal management practices : A peep into the black box of Indian IT Companies” accepted for presentation at the Academy of International Business (AIB)-INDIA Chapter Conference to be held at Shimla on 9th - 11th April 2018.
  17. Rana, Arunima, Bhat Anil and Rani, Leela "The Cognitive Structure of Online Brand Choice: An Exploratory Study" has been accepted  for presentation at 21st Academy of Marketing Science World Marketing Congress (AMS WMC). Porto, Portugal, on 27 - 29 June, 2018
  18. Preeti Tewari, Anil Bhat & Jyoti "Identifying the role of antecedents on Social Entrepreneurial Intentions Formation" has been accepted for presentation in a refereed session at the 2018 SEE Conference, in Washington, DC, on March 2-4, 2018
  19. Arunima Rana, Anil Bhat & Leela Rani “Investigating Path to Purchase for Online Impulse Buying: A Decision Net Approach”, accepted for presentation at 2018 Winter   AMA Academic Conference , Feb23-25, New Orleans, L.A, USA
  20. Jayashree Mahesh and Anil K. Bhat ‘Convergence of Management Practices in India's I.T. Sector - The Mirage and the Myopia of Managerial Perception ‘ Accepted for presentation  in Aston India Centre for Applied Research Inaugural Conference, Aston Conference Centre, Aston University,Birmingham,U.K,15th September 2017  -16th 
  21. Tiwari, P.; Bhat, A. K. and Tikoria, J. (2017) "The Mediating Role of Subjective Norms in the Formation of Social Entrepreneurial Intentions", accepted for presentation in session at the 2017 Academy of Management Conference (AOM) on August 4th-8th in Atlanta, Georgia. [Recommended for Carolyn Dexter Award by ENT Division]
  22. Dutta, N & Bhat, A. 2017. "Influence of Relational Characteristics of Social Network Sites on Intention to Pass-along Electronic Word of Mouth: Exploring the Role of Trust” in the 2017 Summer Marketing Educators’ Conference (Summer AMA) organized by American Marketing Association at San Francisco, California, United States from Aug 4th to Aug 6th 2017
  23. Dutta, N, & Bhat, A. 2017. "Lip Service or Real Concern: Testing the Claim to Pay Premium for Green Products through an Experimental Research” in the 2017 Summer Marketing Educators’ Conference (Summer AMA) organized by American Marketing Association at San Francisco, California, United States from Aug 4th to Aug 6th, 2017
  24. Neetu Yadav, Anil Bhat, and Sushil “Sustaining competitiveness of India’s IT-ITes industry: A Systems Approach” Accepted for presentation in 2nd Asia-Pacific Region System Dynamics Conference of the System Dynamics Society, February 19-22, 2017,NUS ,Singapore
  25. Dutta, Nirankush, and Bhat, Anil. " Influence of Structural Characteristics of Social Network Sites  on Intention to Pass-along Electronic Word of Mouth: Exploring the Role of Trust” Accepted for Presentation in the 7th IIMA Conference on Marketing in Emerging Economies organized by IIM, Ahmedabad from 11th- 13th  Jan, 2017
  26. Rana ,Arunima, Anil Bhat, Rani, Leela “Interaction Effects of Sources of Online Brand Equity: An Investigation” has been selected to be presented at 7th IIM-A Conference on Marketing in Emerging Economies, 2017 to be held at IIM, Ahmedabad during 11th-13th January, 2017
  27. Nikita Sharda, Anil Bhat, P.K. Sinha. 2016 “The relationship between the antecedents of luxury consumption and attitude towards luxury consumption among the young Indian luxury buyer” Accepted for presentation in  Annual Conference of Emerging Markets Conference at IIM Lucknow from 5th - 7th January, 2017.
  28. Nikita Sharda, Anil. K. Bhat, P.K. Sinha.  “A Study of antecedents of luxury consumption among young Indian luxury consumers” accepted for presentation in 7th IIMA Conference on Marketing in Emerging Economies at IIM Ahmedabad from 11th - 13th January, 2017
  29. Preeti Tewari, Anil Bhat & Jyoti “The effect of emotional intelligence, empathy and perceived social pressure on predicting social entrepreneurial intention” has been accepted for presentation in the International Conference on Methodological Issues in Social Entrepreneurship Knowledge and Practice, 18th-20th January 2017. Tata Institute of Social Sciences TISS ,Mumbai
  30. Preeti Tewari, Anil Bhat & Jyoti “Exploring the Factors Responsible in Predicting Entrepreneurial Intention among Nascent Entrepreneurs: A Field Research"   9th Annual Conference of the Academy of Innovation and Entrepreneurship at  University of Sydney ,Sept. 2-3rd,2016[Awarded Excellent Paper Award]  
  31. Arunima Rana , Anil Bhat and Leela Rani, "The Underlying Dimensions of Brand equity: Multidimensional Scaling Approach in the Indian Online Retail Segment", accepted for presentation at 30th annual conference of British Academy of Management (BAM) , Sept. 5-8, 2016, Newcastle University, U.K
  32. Jayashree Mahesh and  Anil Bhat "How Global is "Indian" Management? A Study of Management Practices in Indian I.T. Sector”, Accepted for presentation at Academy of Management (AOM)Annual Meeting, 2016August 5-9 ,Anaheim, California, USA.
  33. Nirankush Dutta and  Anil Bhat , “Effect of Structural Attributes of Online Social Network on Trust, E-WOM and Purchase Intention” Accepted for presentation at Academy of Management (AOM)Annual Meeting, 2016 August 5-9 ,Anaheim, California, USA.
  34. Nirankush Dutta and  Anil Bhat , "Effect of Social Media Characteristics on Intention to Purchase and Pass along Electronic Word of Mouth," Accepted to be presented  at the 2016 Summer Marketing Educators’ Conference American Marketing Association(AMA), August 5-7,Atlanta USA
  35. Nirankush Dutta, and Anil Bhat “Effect of Tie Strength on Intention to Pass-along e-WOM: Exploring the Role of Trust in s-Commerce “ Accepted in the Conference on Brand Management (CBM 2016) organized by IIT Delhi, April 16-17, 2016
  36. Arunima Rana, Anil Bhat and  Leela Rani “The Impact of E-marketing Mix Elements on Brand Association: A Comparative Examination in the Indian E-commerce Segment “accepted in the Conference on Brand Management (CBM 2016) organized by IIT Delhi, April 16-17, 2016
  37. Arunima Rana, Anil Bhat and  Leela Rani ' The Underlying dimensions of On-line Retail Brands: A Multidimensional Scaling Approach' Accepted in Third International Communication Management Conference (ICMC) organized by MICA, Ahmedabad at MICA, Ahmedabad Campus from Feb 18, 2016 to Feb 20, 2016
  38. Dutta, Nirankush, and Anil Bhat. 2016. " From Perceived Social Capital to Electronic Word of Mouth: Exploring Role of Trust in Social Media Marketing” Accepted in Conference on Emerging Themes in Strategy organized by Management Development Institute (MDI), Gurgaon at MDI, Gurgaon Campus from Feb 25, 2016 to Feb 26, 2016
  39. Dutta Nirankush and Anil Bhat. 2016.  "Effects of Perceived Homophily on Intention to Pass-along e-WOM: Exploring the role of Trust in s-Commerce” Accepted in Third International Communication Management Conference (ICMC) organized by MICA, Ahmedabad at MICA, Ahmedabad Campus from Feb 18, 2016 to Feb 20, 2016
  40. Dutta, Nirankush, and Anil Bhat. 2015. "Exploring Store Characteristics for Propagation of Electronic Word of Mouth in Online Social Media Marketing" in 5th SGBED International Research Symposium organized by Nanjing University of Finance & Economics and Society for Global Business & Economic Development at Nanjing University of Finance & Economics, Nanjing, China from Dec 10, 2015 to Dec 12, 2015
  41. Dutta, Nirankush, and Anil Bhat. 2015. "Role of Trust on Perceived Store Characteristics and Consumer Behavioural Outcome in the Context of Online Social Media Marketing" in 3rd Pan-IIM World Management Conference (WMC 2015) organized by all 13 Indian Institutes of Management (IIMs) together at IIM Indore
  42. Sharda Nikita, Anil Bhat & Piyush Kumar Sinha “Development of a standard inventory for measuring antecedents of luxury consumption in India ” Accepted for presentation in 2015 Global Fashion Management Conference at Florence to be held at University of Florence, Florence, Italy during  June 25 - 28, 2015
  43. Dutta, Nirankush, Arunima Rana, and Anil Bhat. 2014. “Facebook Content Strategy of Industry Leaders in India: An Exploratory Analysis” in International Conference on Evidence Based Management (ICEBM 2015) organized by Birla Institute of Technology & Science (BITS) Pilani at BITS Pilani Campus from Mar 20, 2015 to Mar 21, 2015 (ISBN: 978-93-84935-18-4)
  44. Preeti Tewari, Anil Bhat & Jyoti “Relationship between Entrepreneurship Education and entrepreneurial Intentions: A validation study” ICIER-IIMB  International Conference on Entrepreneurship Education and Training, Indian Institute of Management Bangalore (IIMB) 29th -31st. Jan. 2015
  45. Nirankush Dutta & Anil Bhat “Relationship among Tie Strength, Trust and Social Capital in Social Network Sites” IIM Calcutta Marketing conference MARCON 2014, IIM Calcutta December 18-20, 2014
  46. Arunima Rana, Anil Bhat & Leela Rani   “An e-Marketing Perspective for M&A: A Case of Flipkart-Myntra Merger” IIM Calcutta Marketing Conference MARCON 2014, IIM Calcutta December 18-20, 2014
  47. Jayashree Mahesh and Anil Bhat Exploring the paradox of ‘Indian Management’: A qualitative research study” Second PAN –IIM World Management Conference, Nov.5th-8th, 2014, IIM Kozhikode, Kerala
  48. Arya Kumar, Anil Bhat and Mohit Alimchandani ”Employee Perception of Adequacy of various skills at Different levels: An Empirical survey of power utilities in India” Second PAN-IIM World Management Conference, Nov.5th-8th 2014, IIM Kozhikode, Kerala
  49. Nirankush Dutta & Anil Bhat, “Exploration of Factors Affecting Initial Trust in Online Social Networks”,  ICSM2014: International Conference on Social Media for Business, IIM Raipur, January 10-11, 2014
  50. Preeti Tiwari, Anil Bhat, & Jyoti Tikoria “Entrepreneurial Intention Models: A Literature Review”, Eleventh AIMS International Conference on Management, IMT Ghaziabad, Dec 21-23, 2013.
  51. Sharma, S.K., Dutta, N. and Anil Bhat , " An Investigation into Service Quality, Service Distribution and Customer Satisfaction: A Case study of AIRTEL", An International conference on Marketing Organized by IITD, Curtin University, Australia and XLRI Jamshedpur (21-22 Dec, 2013)
  52. Nirankush Dutta, & Anil Bhat Power of Social Media: Stories of Sheer Successes and Devastating Disappointments”, Eleventh AIMS International Conference on Management, IMT Ghaziabad, Dec 21-23, 2013
  53. Mohit Alimchandani, Arya Kumar, Anil Bhat Highlighting Issues & Critical Challenges for Power Sector of India”, Eleventh AIMS International Conference on Management, IMT Ghaziabad, Dec 21-23, 2013
  54. Nikita Sharda and Anil Bhat “Association of Levels of Corporate Social Responsibility with Financial Performance of Indian Medium-Sized Companies” VIII Annual International Conference on Public Policy and Management: Infrastructure - Hard and Soft  held at IIM Bangalore ,August 12-14, 2013
  55. Arun Kumar Vaish, Arya Kumar & Anil Bhat, "Wither Money Lender? Long live Money-lending Insights!”, Accepted for presentation at  World conference on "Emerging Issues in Management jointly hosted by the Indian Institutes of Management at Goa, India  and  sponsored by Ministry of HRD, Govt. of India ,May 30- June 1, 2013
  56. Sharma, S.K., Sharma, V.K. and Anil Bhat , " Risk management in ERP implementation projects”, International conference on business innovations and management at MNIT Jaipur 18th-19th May 2013
  57. Preeti Tiwari, Anil Bhat  and Jyoti  “ A Review Paper on Examining the Role of Factors Affecting Social Entrepreneurship Intention” Tenth Biennial Conference on Entrepreneurship held at Entrepreneurship Development Institute, Ahmedabad during February 20-22, 2013
  58. Alimchandani  Mohit, Anil Bhat & Arya Kumar “Competitiveness of India’s Power Sector: A Frameworks’ Perspective” Tenth AIMS International Conference on Management , Jan 6-9, 2013 at IIM Bangalore, (Proceedings published  ISBN:978-81-924713-1-0)
  59. Tiwari Preeti, Anil Bhat & Jyoti “Review of Social Entrepreneurship and Future Research Agenda” Tenth AIMS International Conference on Management , Jan 6-9, 2013 at IIM Bangalore, (Proceedings published ISBN:978-81-924713-1-0)
  60. Dutta Nirankush & Anil Bhat “An Exploration of Antecedents & Outcomes of Trust in Social Media Marketing” Tenth AIMS International Conference on Management , Jan 6-9, 2013 at IIM Bangalore, (Proceedings published ISBN:978-81-924713-1-0)
  61. Satyendra Sharma , Anil Bhat & Vinod Joshi “Supply Chain Risk: Retailers Perspective” Tenth AIMS International Conference on Management , Jan 6-9, 2013 at IIM Bangalore, (Proceedings published ISBN:978-81-924713-1-0)
  62. Satyendra Kumar Sharma and  Anil Bhat ‘Empirical relationship among antecedents of supply chain agility’ XVI Annual International Conference of Society of Operations Management at IIT Delhi 21-23rd Dec.2012
  63. Nirankush Dutta and   Anil Bhat“ Flipkart: Burdened by Cost of Success” International Case Study Conference – 2012 (ICSC-2012) held at IBS Hyderabad in partnership with ecch and Universiti Utara Malaysia Dec. 14 -15, 2012
  64. Bhat, Anil and Sarvesh Satija (2012), ' Sustainability and Competitive Strategy: An Indian Context', International Conference on 'Business Sustainability: Challenges & Issues' ,Organized by  Fore  School of Management & PHD Chamber, New Delhi, Nov.28-30, 2012
  65. Bhat, Anil (2012) " Gender preference towards Social Entrepreneurship Intent: A Student Survey in a Technology University in India” REE Asia, Stanford Technology Ventures Programme, Thailand, Bangkok, Feb 1-3rd, 2012
  66. Mahesh Jayashree and Anil Bhat, "Indian Management Practices: A Chimera or a Reality", in the proceedings of International conference on 'Management in new world order' at IIM Ranchi, India (August, 2012) (Awarded best paper in its track)
  67. Sharma, S.K. and Anil Bhat, "Supply chain risk management practices in Indian automotive sector", paper in International conference on 'Management in new world order' at IIM Ranchi, India (August, 2012)
  68. Bhat, Anil, Sharma, S.K. and Harsha, S. (2012) " Relationship between corporate social responsibility and financial performance of firm: An Indian context" in the proceedings of International conference on Doing well by doing good, SGBED   organized by IIM Bangalore (India) and Curtin University (Australia) July 9-12,2012

Books/Monographs/Cases

Books/Short Cases/Monographs

Book/s 
  • Anil Bhat & Arya Kumar  : Management: Principles, Processes and Practices        [Publisher:Oxford University Press; May 2008]
  •  Anil Bhat & Arya Kumar: Principles of Management: Competencies, Processes, and Practices[Publisher : Oxford University Press; June 2016] 
  • Video Express: The case of rural marketing by a van promotion company
  • Angel's cereal: Product testing of a new cereal food for toddlers
  • Vendor development at Maruti Udyog Ltd.: A case study
  • High Involvement consumer decision making: The case of buying a residential flat in Delhi
  • Distribution and Promotional Strategies of a national watch Manufacturer in rural India- A case Study

Research Publications

Research Papers published in International/National Journals:

  1.  T. Singh and Mukti AcharyaSkolem graceful signed graphs, Extended abstract published in Electronic Notes in Discrete Mathematics, Vol. 15 (2003), 9-10
  2.  T. Singh and Mukti AcharyaGraceful signed graphs: III. The case of signed cycles in which negative sections form a maximum matching, Graph Theory Notes of New York, Vol. XLV, (2003), 11-15.
  3. T. Singh and Mukti Acharya, Graceful signed graphs, Czech. Math. Journal, Vol. 54(129)(2), (2004), 291-302.
  4. T. Singh and Mukti Acharya, Graceful signed graphs: II. The case of signed cycle with connected negative section, Czech. Math. Journal, Vol. 55(130)(1), (2005), 25-40.
  5. T. Singh and Mukti Acharya, Graceful signed graphs: V. Union of k copies of the cycle of length three with one vertex in common, International Journal of Management & Systems (IJOMAS), Vol. 20(3), (2004), 246-254 .
  6. T. Singh and Mukti Acharya, Construction of graceful signed graphs, Defense Science Journal, Vol.56 (5) (2006), 801-808.
  7. T. Singh, S.B. Rao, B.D. Acharya, Minimum robust domination energy of graphs, AKCE International Journal of Graphs CombinatoricsVol. 4 No. 2 (2007), pp. 139-143.
  8. T. Singh and Mukti Acharya, Two signed Stars are Skolem Graceful,  Journal of Combinatorial Mathematics and Combinatorial Computing, Vol. 69(2009), 113-124.
  9. T. Singh, Graceful Signed Graphs on C3kAKCE International Journal of Graphs and Combinatorics, Vol. 6 No. 1(2009), 201-208.
  10. T. Singh, B.D. Acharya, Mukti Acharya and S.B. Rao, Hypergraceful complete graphs, Australasian Journal of Combinatorics, Vol. 48 (2010), 5-24.
  11. T. Singh and Mukti AcharyaSkolem graceful signed graphsUtilitas Mathematica, 82(2010), 97-109.
  12. T. Singh, Utpal Roy and Veeky Baths, Disruption of Cell wall fatty acid biosynthesis in Mycobacterium tuberculosis using graph theoryTheoretical Biology and Medical Modeling 2011, 8:5 doi:10.1186/1742-4682-8-5.
  13. T. Singh and Mukti Acharya, Embedding of Sigraphs in Graceful SigraphsARS Combinatoria111(2013), 421-426.
  14. T. Singh, Veeky Baths and Anil Kumar, Disruption of Cell wall fatty acid biosynthesis in Mycobacterium tuberculosis using the concept of minimum robust domination energy of graph, Annual Research & Review in Biology, 4(12):2037-2014, 2014.
  15. T. Singh, Jessica Periera and S. ArumugamOn (k,d)-Skolem graceful graphs, Electronic Notes in Discrete Mathematics, 48(2015), 81-88.
  16. T. Singh, Aloysius Godinho and S. Arumugam, On S-magic graphs, Electronic Notes in Discrete Mathematics, 48(2015), 267-273.
  17. T. Singh, Jessica Periera and S. Arumugam,  A new measure for gracefulness of graphsElectronic Notes in Discrete Mathematics48(2015), 275-280.
  18. T. Singh, Jessica Periera and S. Arumugam,  On (k,d)-hooked Skolem graceful graphs. Journal of Combinatorics, Information & System Science41 No.1-3(2016), 7-15.
  19. T. Singh, Veeky Baths, S. Indumathi and S. Arumugam, Graph theoretic concepts in the study of biological networks,  Applied Analysis with Applications in Biological and Physical Sciences (2016), 187-200.
  20. T. Singh, Veeky Baths, Marina Dhara and S. Arumugam,  Analysis of Tuberculosis-Human Protein Interaction Network using Centrality Measure(accepted 2016).
  21. T. Singh, A.K. Handa, Aloysius Godinho and S. Arumugam, Distance Antimagic Labeling of Join and Carona of two Graphs, AKCE International Journal of Graph and Combinatorics, 14(2017), 172-177.
  22. T. Singh and Aloysius Godinho, Some Distance Magic Graphs, Electronic Notes in Discrete Mathematics, 63(2017), 311-315.
  23. T. Singh, A.K. Handa and Aloysius Godinho, Distance Antimagic Labeling of Ladder Graphs, Electronic Notes in Discrete Mathematics, 63(2017), 317-322.
  24. T. Singh and Aloysius Godinho, Some Distance Magic GraphsAKCE International Journal of Graph and Combinatorics, 15(1) (2018), 1-6.
  25. T. Singh, Aloysius Godinho and S. Arumugam, The Distance Magic Index of a GraphDiscussiones Mathematicae Graph Theory, 38(1)(2018), 135-142.
  26. T. Singh,  Manoj Kumar Singh, Dharm Raj Singh and Rajkishore Prasad, Genetic Algorithm for Solving Multiple Travelling Salesmen Problem using a new Crossover and Population Generation, Computacion Y Sistemas: International Journal of Computing Science and Applications, Vol. 22, No. 2 (2018), 491–503.
  27. T. Singh, S.B. Rao, E. Sampathkumar, Mukti Acharya and B.D. Acharya, Saturated Edge Coverings of Graphs,  Indian Journal  of Discrete MathematicsVol. 4(1) (2018), 47-52.
  28.  T. Singh, Jessica Pereira and S. Arumugam, Edge Consecutive Graceful Labeling of a Graph, Discrete Applied Mathematics280(2020), 214-220. 
  29. Jessica Pereira, Tarkeshwar Singh and S. Arumugam, On k-Hypergraceful Labelings of Complete Graphs,  Indian Journal  of Discrete MathematicsVol. 7(2) (2021), 133-145.
  30. T. Singh, Jessica Pereira and S. Arumugam, Additively Graceful Signed Graphs, AKCE International Journal of Graph and Combinatorics, Vol.20(3) (2023), 300-307.
  31. T. Singh, Teja Sai Ram, Sawlani Shivam, V. Lokeshwar Reddy, V.P. Agarwal, Anasuya Ganguly, Graph Theoretical Model and Analysis of Carbon Cycle, International Journal of Chemical and Environmental Sciences, Vol.4(2)(2023), 7-23.
  32. T. Singh, Aloysius Godinho, A.K. Handa, On Local Distance Antimagic Labeling of Graphs, AKCE International Journal of Graph and Combinatorics Vol. 21(1)(2024), 91-96 (Published online: 30 Oct 2023).
  33. T. Singh and Ravindra K. Pawar, Distance Magic Labeling of Mycielskian Graphs, Electronic Journal of Graph Theory and Applications, Vol. 12(1) (2024), 75-88.
  34.  T. Singh, Ravindra K. Pawar and J.S. Bagga, Super Total Local Antimgaic Vertex(Edge) Coloring of Graphs, Bulletin of the Institute of Combinatorics and its Applications (accepted 2024).

Research Papers published in Conference Proceedings:

  1. T. Singh and Mukti Acharya, Characterization of signed graphs whose negations are switching equivalent to their iterated line sigraphsProc. of Conference of Graph Theory and Applications (CGTA-2001) (Eds.: R.J. Wilson, R. Balakrishnan and G. Sethuraman), Narosa Publishing House Pvt. Ltd. (2004), 15-24.
  2. S.B. Rao, T. Singh and V. Parameswaran, Some sigma labeled graphs: I. Proc. of National Conference of Graphs, Combinatorics, Algorithms and Applications (NCGCAA-2004) (Eds.: S. Arumugam, B.D. Acharya and S.B. Rao), Narosa Publishing House Pvt. Ltd. (2004), 125-134.
  3. T. Singh, S.B. Rao, B.D. Acharya and Mukti Acharya, Graceful complete signed graphs, Extended abstract published in Proc. of National Conference of Graphs, Combinatorics, Algorithms and Applications (NCGCAA-2004) (Eds.: S. Arumugam, B.D. Acharya and S.B. Rao), Narosa Publishing House Pvt. Ltd. (2004), 123-124.
  4. T. Singh,  Skolem and hooked Skolem graceful sigraphs, Labelings of Discrete Structures and Applications (Eds.: B.D. Acharya, S. Arumugam, and A. Rosa), Narosa Publishing House, (2008), pp. 155-164.
  5. Tarkeshwar Singh, Manoj Kumar Singh and Dharm Raj SinghA hybrid heuristic algorithm for Euclidean traveling salesman problem, IEEE Proc. International Conference on Computing, Communication and Automation(ICCCA 2015) (2015), pp. 767-772.
  6.  Adarsh K. Handa, Aloysius Godinho, and T. Singh, Some Distance Antimagic Labeled Graphs, Proc. Algorithms and Discrete Mathematics (CALDAM 2016)(Eds. Satish Govindrajan and Anil K. Maheshwari), Lecture Notes in Computer Science (LNCS) Vol. 1906 (2016), 190-200.
  7.  T. Singh, Jessica Periera and S. Arumugam, m-Gracefulness of Graphs, Proc. Algorithms and Discrete Mathematics (CALDAM 2016)(Eds. Satish Govindrajan and Anil K. Maheshwari), Lecture Notes in Computer Science (LNCS) Vol. 1906 (2016), 289-298.
  8.  Tarkeshwar Singh, Manoj Kumar Singh and Dharm Raj Singh, A Hybrid Algorithm with Modified Inver-Over Operator and Ant Colony Optimization for Traveling Salesman ProblemAdvances in Computing, Control and Communication Technology,  Springer Singapore (2016), 141-150..
  9. T. Singh and Aloysius Godinho, Group Distance Magic Labeling of CnProc. Algorithms and Discrete Applied Mathematics (CALDAM 2016)(Eds. Daya Gaur and N.S. Narayanaswamy), Lecture Notes in Computer Science (LNCS) Vol. 10156 (2017), 187-192.
  10.  T. Singh and Aloysius Godinho and S. Arumugam,  Nearly Distance Magic Graphs Proc. International Conference on Theoretical Computer Science and Discrete Mathematics (ICTCSDM 2016) (Eds. S. Arumugam, Jay Bagga, Lowell W. Beineke and B.S. Panda), Lecture Notes in Computer Science (LNCS) Vol. 10398 (2017), 187-192, DOI: 10.1007/978-3-319-64419-610.

Research Papers Submitted for Publication:

  1. T. Singh, Jessica Pereira and S. Arumugam, Embedding of Graceful Sigraphs with Graph Theoretic Property P (Revised and submitted 2023).
  2. T. Singh and Aloysius Godinho and S. Arumugam, d-Vertex Magic Graphs Labeling of Circulant Graphs (Submitted 2023).
  3. T. Singh and Ravindra K. Pawar, Distance Magic Labeling of Generalized Mycielskian Graphs (Submitted 2023).
  4. T. Singh, Ravindra K. Pawar, Himadri Mukherji and J.S. Bagga, A Complete Characterization of Magic Constants Arising from Distance Magic Graphs (Revised and submitted 2024).
  5. T. Singh, Ravindra K. Pawar, Himadri Mukherji, On Structural and Spectral Properties of Distance Magic Graphs (Revised and submitted 2024).

Book Chapters

  1. A.M. Aneesh, Atul Sharma, Atul Srivastava and Paritosh Chaudhuri, Thermo-Hydraulic Performance of Zigzag, Wavy, and Serpentine Channel Based PCHEs, Vol. 1, Part III (Computational Fluid Dynamics), Chapter 49, pp. 507-516, Edited by A.K. Saha, D. Das, R. Srivastava, P.K. Panigrahi, K. Muralidhar, Fluid Mechanics and Fluid Power – Contemporary Research, Lecture Notes in Mechanical Engineering, Springer, 2017.
  2. Hamid Hassan Khan, A.M. Aneesh, Atul Sharma, Atul Srivastava and Paritosh Chaudhuri, CFD Study on Thermal Hydraulic Performance of A Wavy Channel Based PCHE Model, Vol. 1, Part III (Computational Fluid Dynamics), Chapter 48, pp. 497-506, Edited by A.K. Saha, D. Das, R. Srivastava, P.K. Panigrahi, K. Muralidhar, Fluid Mechanics and Fluid Power – Contemporary Research, Lecture Notes in Mechanical Engineering, Springer, 2017.

Journal papers

  1. Anil Kumar, Aneesh A.M., and Anirudh Singh Rana, Modelling of Phase Change in Nano-Confinement Using Moment Methods, Journal of Heat Transfer, 2022.
  2. A.M. Aneesh, Atul Sharma, Atul Srivastava, Paritosh Chaudhury, Effects of wavy channel configurations on thermal-hydraulic characteristics of Printed Circuit Heat Exchanger (PCHE), International Journal of Heat and Mass Transfer, Volume 118, 2018, Pages 304-315.
  3. A.M. Aneesh, Atul Sharma, Atul Srivastava, K.N. Vyas, Paritosh Chaudhuri, Thermalhydraulic characteristics and performance of 3D straight channel based printed circuit heat exchanger, Applied Thermal Engineering, Volume 98, 2016, Pages 474-482. 
  4. Hamid Hassan Khan, Aneesh A. M, Atul Sharma, Atul Srivastava, Paritosh Chaudhuri, Thermal-hydraulic characteristics and performance of 3D wavy channel based printed circuit heat exchanger, Applied Thermal Engineering, Volume 87, 5 August 2015, Pages 519-528.

Conference papers

  1. Pradeep Gupta, Harsh Kulkarni, Aneesh A. M. , Pramod Kumar, and Srisha M. V. Rao, Reconstructing Laser Scattering Images from High-speed Schlieren Images using Convolutional Neural Network, Proceedings of the 9th International and 49th National Conference on Fluid Mechanics and Fluid Power (FMFP) December 14-16, 2022, IIT Roorkee, India.
  2. Sambhu Nair, Vishwjeet Choudhary, Aneesh A. M., Laminar flow through circular pipe with uniform roughness: A numerical investigation, 1st International Conference in Fluid Thermal and Energy Systems June 9-11, 2022, NIT Calicut, Kerala, India.
  3. Gaurav Kumar, Aneesh A. M., S Kumar, Effect of vortex dynamics on the wall shear stress in Intracranial Aneurysm: A numerical investigation, 1st International Conference in Fluid Thermal and Energy Systems June 9-11, 2022, NIT Calicut, Kerala, India.
  4. Anil Kumar, Anirudh Singh Rana, Aneesh A. M., Heat transfer through nano-confined gases: a prospective from the moment approximation theory, Proceedings of the 48th National Conference on Fluid Mechanics and Fluid Power (FMFP) December 27-29, 2021, BITS Pilani, Pilani Campus, Rajasthan, India.
  5. Gaurav Sharma and Aneesh A.M., Analysis of Hypersonic Rarefied Reactive Flow Over RAM-C II Forebody Using hy2Foam Solver, Begell House Digital Library, Proceedings of the 26th National and 4th International ISHMT-ASTFE Heat and Mass Transfer Conference, DOI: 10.1615/IHMTC-2021.3350, 2021
  6. S. Anirudh Krishna, P. Munde and Aneesh A. M., Analysis of Hypersonic Rarefied Flow past a Flat Plate Using dsmcFoam+ Solver, 2021 IEEE Aerospace Conference (50100), 2021 (Appeared IEEE Xplore proceedings).
  7. C. K. Malde, G. Sharma and Aneesh A. M., "Development and Testing of Computational Model for the Thermal Analysis of a CubeSat Nanosatellite," 2021 IEEE Aerospace Conference (50100), 2021(Appeared IEEE Xplore proceedings).
  8. Ankur Barsode and Aneesh A.M., Bypassing traditional molecular dynamics with artificial neural networks, 2nd International Conference on Recent Advances in Fluid and Thermal sciences (Virtual), March 19-21, 2021, Birla Institute of Technology and Science, Dubai Campus, United Arab Emirates (will be appeared in AIP proceedings soon).
  9. Joaquim P Jossy and Aneesh A.M., Vortex Dynamics Around a Fluctuating Beam, 2nd International Conference on Recent Advances in Fluid and Thermal sciences (Virtual), March 19-21, 2021, Birla Institute of Technology and Science, Dubai Campus, United Arab Emirates (will be appeared in AIP proceedings soon).
  10. Aneesh A.M., Atul Sharma, Atul Srivastava and Paritosh Choudhury, Fabrication and Performance Evaluation of Straight channel based Lab scale, PCHE (LPCHE), Asian Joint Workshop on Thermophysics and Fluid Science (AJWTF7), November 21-24, 2018, Thiruvananthapuram, India.
  11. Hamid Hassan Khan, Aneesh A. M., Atul Srivastava, Atul Sharma, CFD study on thermal hydraulic performance of a wavy channel based PCHE model, Proceedings of the 5th International and 41st National Conference on Fluid Mechanics and Fluid Power, December 12-14, 2014, IIT Kanpur, India.
  12. Aneesh A.M., Atul Sharma, Atul Srivastava, Thermo-hydraulic performance of zigzag, wavy, and serpentine channel based PCHEs, Proceedings of the 5th International and 41st National Conference on Fluid Mechanics and Fluid Power, December 12-14, 2014, IIT Kanpur, India.
  13. Aneesh A.M., Atul Sharma, Atul Srivastava, CFD study on the thermo-hydraulic performance of Printed Circuit Heat Exchangers, Proceedings of the 22nd National and 11th International ISHMT-ASME Heat and Mass Transfer Conference, December 28-31, 2013, IIT Kharagpur, India.
  14. Aneesh A.M., G. Venugopal, Mixed Convection in a Horizontal Channel with Planar Flush Mounted Heat Sources Placed in the Bottom Wall, 12th National Conference of Technological Trends, August 18-20, 2011, Thiruvananthapuram, India.

 Publications

Journal publications

  1. Rana A., Bhat A. K. & Rani L. (2019), "The Cognitive Structure of Online Brand Choice: An Exploratory Study, in book: P. Rossi, N. Krey (eds.), Finding New Ways to Engage and Satisfy Global Customers, Developments in Marketing Science: Proceedings of the Academy, Publisher: Springer, Cham.
  2. Yadav, N., Gupta, K., Rani, L., & Rawat, D. (2018). Drivers of Sustainability Practices and SMEs: A   Systematic Literature Review. European Journal of Sustainable Development, 7(4), 531-544.
  3. Sharma, M. and Rani, L. (2016), "Demographic Differences among Indian Primary School Children’s Environmentally Sustainable Consumption Behaviour”. International Journal of Applied Business and Economics Research, Vol. 14(6) (Scopus Indexed).
  4. Sharma, M. and Rani, L. (2016), "Social Learning Tools for Environmentally Sustainable Consumption Behavior in Primary Schools”. European Journal of Sustainable Development, Vol. 5(4) (Thomson Reuter Indexed).
  5. Rana A., Bhat A. K. & Rani L. (2015),"A classificatory scheme for antecedents of the sources of “online brand equity”", Journal of Research in Interactive Marketing (ABDC, Scopus indexed), Vol. 9, Issue 4, pp. 262 - 298 Permanent link to this document: http://dx.doi.org/10.1108/JRIM-02-2014-0008.
  6. Sharma, M. and Rani, L. (2014), “Environmentally Sustainable Consumption: A Review and Agenda for Future Research", Global Journal of Finance & Management, Vol. 6(4), pp. 367-374.
  7. Sharma, M. and Rani, L. (2014), "A Study of Children's Influence on Environmentally Sustainable Consumption Decisions in Household”, Asian Journal of Management (in UGC approved list of Journals), Vol. 5(4), pp. 420-430.
  8. Sharma, M. and Rani, L. (2014), “Environmentally Sustainable Consumption: A Review and Agenda for Future Research", Global Journal of Finance & Management, Vol. 6(4), pp. 367-374, ISSN no.: 0975-6477
  9. Sharma, M. and Rani, L. (2014), "A Study of Children's Influence on Environmentally Sustainable Consumption Decisions in Household”, Asian Journal of Management, Vol. 5(4), pp. 420-430. ISSN no.: 0976- 495X
  10. Rani, L. and Velayudhan, S. K. (2008), “Understanding Consumer’s Attitude Towards Retail Store in Stockout Situations”, Asia Pacific Journal of Marketing and Logistics, Vol. 20(3), pp. 259-275. 
  11. Rani, L. (2008), “Consumer Reactions to Retail Out-of-stock: Replication into New Contexts”, International Journal of Indian Culture and Business, Vol. 1(3), pp.319-334.

 

Conference presentations

  1. Yadav, N., Gupta, K., and Rani, L. (2018), “Drivers of Sustainability Strategies and SMEs: A Systematic Literature Review”, Accepted for Presentation at 6th International Conference on Sustainable Development, Organized by European Center of Sustainable Development, Rome, Sep. 12-13, 2018.
  2. Rani, L. and Yadav N. (2018), “Approach to Using Social Learning for Fostering Sustainability: Review of Literature with Children’s Context as a Case” – virtual participation, 6th International Conference on Sustainable Development, by European Center of Sustainable Development, Rome, Sep. 12-13, 2018.
  3. Rana, A., Bhat A. K. & Rani, L., "The Cognitive Structure of Online Brand Choice: An Exploratory Study”, presented at Academy of Marketing Science World Marketing Congress held at Universidade Lusiada-Norte at Porto, Portugal from 27th to 29th June, 2018.
  4. Rana, A., Bhat A. K. & Rani, L., "Investigating Path to Purchase for Online Impulse Buying: A Decision Net Approach" presented at 2018 AMA Winter Academic Conference organized by The American Marketing Association (held in February 2018).
  5. Sharma M. and Rani L., “Demographic Differences among Indian Primary School Children’s Environmentally Sustainable Consumption Behavior” presented at International Conference on Applied business and Economic Research, ICABER -2016 organized by International Journal of Applied Business and Economics Research, Serial Publications held in Delhi.
  6. Sharma M. and Rani L., “Exploring Prominent Social Cognitive Determinants of Environmentally Sustainable Consumption Behavior in Children” International Conference on ‘Reaching Consumers of Emerging Markets- 2017’ organized by Indian Institute of management, Lucknow [IIML] Noida Campus from 5th – 7th January 2017, ISBN: 978-81-928560-2-5, Vol (1): pp. 121-125.
  7. Sharma M. and Rani L., “Environmentally sustainable consumption awareness among children: An empirical study”, presented at International Research Conference on Business Process Re-engineering for Sustainability and Climate Change: Issues & Perspectives organized by IARDO, Delhi (26th to 26th February 2017).
  8. Meenakshi Sharma, Dr. Leela Rani. Presented Paper in International Conference on Evidence Based Management (ICEBM) 2017, organized by Dept. of Management, BITS-Pilani, Pilani Campus titled “Social Cognitive Determinants of ESCB: A Structural Equation Analysis”.
  9. Rana, Bhat and Rani, “Interaction Effects of Sources of Online Brand Equity: An Investigation", presented at 7th IIMA Conference on Marketing in Emerging Economies, 2017 held at IIM, Ahmedabad during 11-13 January 2017.
  10. Rana, Bhat and Rani, “Centrality of Some Salient Variables in Creating Online Brand Equity “presented at the 2017 Annual Conference of Emerging Markets Conference Board held at IIM Lucknow (Noida Campus) during 7-9 January 2017.
  11. Sharma M. and Rani L., “Social Learning Tools for Environmentally Sustainable Consumption Behavior in Primary Schools” presented at International Conference on Sustainable Development -2016, Rome, Italy organized by European Journal of Sustainable Development held in Rome.
  12. Sharma M. and Rani L., “Understanding the Impact of Computer-Mediated Intervention on Environmentally Sustainable Consumption Behavior”. presented at International Conference on Marketing Technology and Society, MARCONF -2016 organized by Indian Institute of management, Kozhikode [IIMK].
  13. Rana, Bhat and Rani, "The Underlying Dimensions of Brand equity: Multidimensional Scaling Approach in the Indian Online Retail Segment", accepted for presentation at 30th annual conference of British Academy of Management (BAM), Sept.5-8, 2016, Newcastle University, U.K
  14. Rana, Bhat and Rani, “The Underlying dimensions of On-line Retail Brands: A Multidimensional Scaling Approach” presented at Third International Communication Management Conference (ICMC) organized by MICA, Ahmedabad at MICA, Ahmedabad Campus from Feb 18, 2016 to Feb 20, 2016
  15. Rana, Bhat and Rani, presented paper titled “The Impact of e-Marketing Mix Elements on Brand Association: A Comparative examination in the Indian e-commerce segment” to be presented in Conference on Brand Management organized by IIT Delhi during 16th -17th April, 2016.
  16. Sharma, M. & Rani, L., "A Study of awareness level of Environmental Sustainable Consumption Issues among Children”, for Global Cleaner Production and Sustainable Consumption Conference (GCPC-2015), to be held in Sitges, Spain & organizing by Journal or Global Cleaner Production.
  17. Sharma, M. and Rani, L., “Identification of Social Learning Tools for Teaching Sustainable Consumption Behavior", presented at International Conference on Social Entrepreneurship and Sustainable Development by Centre for Social Entrepreneurship, February 2015, organized by School of Management and Labour Studies, Tata Institute of Social Sciences.
  18. Sharma, M. and Rani, L., “Environmentally sustainable Consumption: A Review and Agenda for Future Research", presented at International Conference on Modern Strategies for Management of Business, Economy, Services vis a- vis- Social Sciences- A Sustainable Approach (MSMBESSA-April, 2014) organized by Krishi Sanskriti held in Jawaharlal Nehru University, New Delhi.
  19. Rana, A., Bhat, A. K. & Rani L, “An e-Marketing Perspective for M&A: A Case of Flipkart-Myntra Merger”, presented at Marketing Conference (MARCON), December 18th -20th, 2014 organized by Indian Institute of Management, Kolkata.
  20. Sharma, M. and Rani, L., "A Study of awareness level of Environmental Sustainable Consumption Issues among Children”, presented at International Conference on Evidence Based Management, March 22nd-23rd, 2015 organized by Department of Management, Birla Institute of management and Science Pilani at Pilani Campus. 
  21. Rani, L., “Consumer’s Response to Stockouts in Retail: A Cross-research Analysis”, paper presented at International Conference on Retailing and Sourcing, January 2005, organized by Birla Institute of Management Technology, New Delhi and Philadelphia University, USA.
  22. Rani, L., “Impact of Self-concept on Consumer Responses in Cause Related Marketing”, paper presented at International Conference on Enterprise and Environment: Towards Global Citizenship, January 2008, organized by ICFAI Business School, Kolkata.

Book Chapter

  1. Rani, L., "Service Quality in Grocery Retailing" in Mridula S Mishra (eds.), Grocery and Wet Retailing, ICFAI Books, ISBN: 978-81-314-2197-0, page 29-49.

International Journals

2022:
 
 24. Naveen P T, Ashish Khare, A R Harikrishnan,  "Adverse Impact of Macro-textured Superhydrophobicity on Contact Time Reduction at High Weber Numbers" Colloids and Surfaces A: Engineering and Physicochemical Aspects,  (Accepted) (2022).
 
23. Ami S Hegde and A R Harikrishnan,  "Interplay of High Zeta Potential and Steric Factor on the Slip Thermofluidics of Power Law Fluids though Narrow Confinements" International Journal of Heat and Mass Transfer, 185 (2022). Link: Click Here.
 
 2021:
 
 
22. Naveen PT, Ashish Khare, A S Hegde and A R Harikrishnan,  "Confined Evaporation-Mediated Enhanced Residence Time of Levitated Water Drops over Deep Oil Pools" Langmuir, 37 (46) (2021). Link: Click Here.
 
21. A S Hegde and A R Harikrishnan,  "Slip hydrodynamics of combined electroosmotic and pressure driven flows of power law fluids through narrow confinements" European Journal of Mechanics-B/Fluids, 89 (2021). Link: Click Here.
  
 
2020:
 
20. P Dhar, R K Dwivedi, A R Harikrishnan,  "Surface declination governed asymmetric sessile droplet evaporation" Physics of Fluids 32(11) (2020). DOI:  https://doi.org/10.1063/5.0025644
 

19.  Ankur Chattopadhyay, Raghavendra Dwivedi, A. R. Harikrishnan and Purbarun Dhar. "Ferro-advection aided evaporation kinetics of ferrofluid droplets in magnetic field ambience" Physics of Fluids 32 (2020) DOI: https://doi.org/10.1063/5.0018815
 

18. Vivek Jaiswal, Shubham Singh, A R Harikrishnan and Purbarun Dhar, " Competitive electrohydrodynamic and electro-solutal advection arrests evaporation kinetics of droplets"  Langmuir 36 (2020), DOI: https://doi.org/10.1021/acs.langmuir.0c01619

 
17. Nilamani Sahoo, Gargi Khurana, A. R. Harikrishnan, Devranjan Samanta, and Purbarun Dhar. "Post impact droplet hydrodynamics on inclined planes of variant wettabilities." European Journal of Mechanics-B/Fluids 79 (2020): 27-37. DOI: https://doi.org/10.1016/j.euromechflu.2019.08.013 

 

 
 
2019:
 

16.  PurbarunDhar, Lakshmi SirishaMaganti, A R Harikrishnan* and Chandan Rajput, Amplifying thermal conduction caliber of nanocolloids employing induced electrophoresis, Experimental Thermal and Fluid Science, 106 (2019) (* joint 2nd author)

DOI: https://doi.org/10.1016/j.expthermflusci.2019.04.030

15.   Purbarun Dhar, Ankur Chattopadhyay, Lakshmi S Maganti, A R Harikrishnan*Streamer evolution arrest governed amplified AC breakdown strength of graphene and CNT colloids, European Physical Journal Applied Physics, 85 (2019). (* joint 2nd author)

DOI10.1051/epjap/2019180360

14.   Purbarun Dhar, Gargi Khurana, A R Harikrishnan and VivekJaiswal, Superhydrophobic Surface Curvature Dependence of Internal Advection Dynamics within Sessile Droplets, Langmuir, 35(4) (2019).

DOI: 10.1021/acs.langmuir.8b03932

 

 
2018:
 

13.   Purbarun Dhar, VivekJaiswal and A R HarikrishnanElectromagnetic field orientation and characteristics governed hydrodynamics within pendent dropletsPhysical Review E, 98(6) (2018).

      DOI: 10.1103/PhysRevE.98.063103 

12.  VivekJaiswal, Raghavendra Kumar Dwivedi, A R Harikrishnan and PurbarunDhar, Magnetohydrodynamics and magnetosolutal transport mediated evaporation dynamics in paramagnetic pendent droplets under field stimulus.Physical Review E, 98(1) (2018).  

11.  A R Harikrishnan, PurbarunDhar, Sateesh G and SK Das, Oscilatory solute-thermal convection driven evaporation kinetics in colloidal nanoparticle-surfactant complex fluid pendant droplets,Physical Review Fluids, 3(7) (2018).

DOI: https://doi.org/10.1103/PhysRevFluids.3.073604.

10.  PurbarunDhar, Lakshmi SirishaMagantiand A R HarikrishnanElectrohydrodynamic fibrillation governed enhanced thermal transport in dielectric colloids under field stimulus, Soft Matter, 14 (2018).

DOI: 10.1039/C8SM00234G.

9.  A R Harikrishan, PurbarunDhar,Sateesh G,Sarit K Das, Correlating contact line capillarity and dynamic contact angle hysteresis in surfactant-nanoparticle based complex fluids, Physics of Fluids, 30(4) (2018), (selected as Editor's Pick).

8.  A R Harikrishnan, PurbarunDhar, Sateesh G, Sarit K Das, Governing Influence of thermodynamic and chemical equilibria on the interfacial properties in complex fluids,Journal of Physical Chemistry B, 112(14) (2018).

DOI: 10.1021/acs.jpcb.7b12008. 

7.  VivekJaiswal, A R Harikrishnan, GargiKhurana and PurbarunDhar, Ionic solubility and solutal advection governed augmented evaporation kinetics of salt solution pendant droplets, Physics of Fluids, 30(1) (2018).

DOI: https://doi.org/10.1063/1.5013356

6. A R Harikrishnan, PurbarunDhar, Optical thermogeneration induced enhanced evaporation kinetics in pendent nanofluid droplets, International Journal of Heat and Mass Transfer,118 (2018). 

DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2017.11.092

 
 
Older: 
 

5. A R Harikrishnan, PurbarunDhar, Sateesh G and Sarit K Das, Effect of Interaction of Nanoparticles and Surfactants on the Spreading Dynamics of Sessile Droplets, Langmuir, 33(43)(2017). 

DOI: 10.1021/acs.langmuir.7b02123. 

4. A R Harikrishnan, Sarit K Das, PK Agnihotri and PurbarunDharParticle and Surfactant Interactions Effected Polar and Dispersive Components of Interfacial Energy in Nanocolloids,Journal of Applied Physics, 122 (5)(2017).

DOI: https://doi.org/10.1063/1.4997123.

3. Ajay Katiyar, A R Harikrishnan* and PurbarunDhar,Influence of temperature and particle concentration on the pH of complex nanofluids,Colloid and Polymer Science 295 (9)(2017), (joint first author).

DOI: https://doi.org/10.1007/s00396-017-4132-7.

2. A R Harikrishnan, PurbarunDhar, Prabhat K Agnihotri, Sateesh G and Sarit K Das, Wettability of complex fluids and surfactant capped nanoparticle induced quasi-universal wetting behaviour, Journal of Physical Chemistry B, 121 (24)(2017).

DOI: 10.1021/acs.jpcb.7b02723. 

1. A R Harikrishnan, PurbarunDhar, Prabhat K Agnihotri, Sateesh G and Sarit K Das, Effects of interplay of nanoparticles, surfactants and base fluid on the surface tension of nanocolloids, European Physical Journal E, 40 (5), (2017). (selected as the cover page article, May 2017 issue).

DOI: https://doi.org/10.1140/epje/i2017-11541-5


Publications

  1. Rahul Kumar, Anant Singh & Atul Gaur, A note on maximal non-λ-rings, Asian-European Journal of Mathematics (Accepted)
  2. Atul Gaur & Rahul Kumar, On minimal ring extensions, Palest. J. Math. (Accepted)
  3. Gaur A, Kumar R.  A question about maximal non φ-chained subrings.  Commun. Korean Math. Soc. 2023;38:11-19.  https://doi.org/10.4134/CKMS.c210272
  4. Gaur, A., Kumar, R. (2022). A Note on FMS Modules and FCP Extensions. In: Ashraf, M., Ali, A., De Filippis, V. (eds) Algebra and Related Topics with Applications. ICARTA 2019. Springer Proceedings in Mathematics & Statistics, vol 392. Springer, Singapore. https://doi.org/10.1007/978-981-19-3898-6_10
  5. Rahul Kumar & Atul Gaur, Maximal non-φ-pseudo-valuation rings, J. Algebra Appl. 21 (2022), no. 5, Paper No. 2250090.
  6. Rahul Kumar & Atul Gaur, A note on pairs of rings with the same prime ideals,  Hiroshima Math. J. 52 (1) 103 - 112, 2022.
  7. Atul Gaur & Rahul Kumar (2022) Maximal non-Prüfer and maximal non-φ-Prüfer rings, Comm. Algebra, 50:4, 1613-1631.
  8. Rahul Kumar & Atul Gaur, A note on residually small rings and modules, Palest. J. Math. 11(1) 149-151 (2022)
  9. Rahul Kumar & Atul Gaur, Pointwise maximal subrings, Beitr Algebra Geom 62(4) 843-856 (2021).
  10. Rahul Kumar & Atul Gaur, A note on φ-λ-rings and φ-∆-rings, Rend. Circ. Mat. Palermo, II. Ser 70(3), 1657-1667 (2021).
  11. Rahul Kumar & Atul Gaur, A note on imbedded prime divisors, Beitr Algebra Geom 62(3) 595-597 (2021).
  12. D.E. Dobbs, Atul Gaur & Rahul Kumar, On a field-theoretic invariant for extensions of commutative rings, II, Palest. J. Math. 10(2) 373-382 (2021).
  13. Rahul Kumar & Atul Gaur, A note on λ-domains and ∆-domains, Bull. Belg. Math. Soc. Simon Stevin 27(4) 499-508 (2020).
  14. Rahul Kumar & Atul Gaur, Three open questions on residually small rings, Rocky Mountain J. Math. 50(1) 177-180 (2020).
  15. Rahul Kumar & Atul Gaur, Avoidance principle and intersection property for a class of rings, Czechoslovak Math. J. 70(4) 1191-1196 (2020).
  16. Rahul Kumar & Atul Gaur, Maximal non valuation domains in an integral domain, Czechoslovak Math. J. 70(4) 1019-1032 (2020).
  17. Rahul Kumar & Atul Gaur, Maximal non λ-subrings, Czechoslovak Math. J. 70(2) 323-337 (2020).
  18. Rahul Kumar & Atul Gaur, λ-rings, φ-λ-rings, and φ-∆-rings, Filomat 33(16) 5135-5147 (2019).
  19. Atul Gaur & Rahul Kumar, Maximal non φ-chained rings and maximal non chained rings, Results Math 74:121 (2019).
  20. Rahul Kumar & Atul Gaur, ∆-extension of rings and invariance properties of ring extension under group action, J. Algebra Appl. 17(12) 1850239 (2018).
  21. Rahul Kumar & Atul Gaur, A Corrigendum to "Hereditary Properties Between a Ring and its Maximal Subrings", Ukr. Math. J. 70(4) 671-672 (2018).
  22. Rahul Kumar & Atul Gaur, On λ-extension of commutative rings, J. Algebra Appl. 17(4) 1850063 (2018).

Publications

  • Diagonalizable Thue Equations -- revisited (with N. Saradha), http://arxiv.org/abs/2204.12082, accepted for publication in The Ramanujan Journal
  • Explicit rational solutions to the variants of Erdos-Selfridge superelliptic curves (with P. Das, S. Laishram, N. Saradha), https://arxiv.org/abs/2105.02792accepted for publication in Int. J. Number Theory
  • On the coefficient-choosing game (with L. Singhal), Moscow J. of Combinatorics and Number Theory 10--3 (2021), 183--202
  • Joint distribution in residue classes of the base-$q$ and Ostrowski digital sumsUnif. Distrib. Theory 14 (2019), no. 2, 1-26
  • Thue's inequalities and the hypergeometric method (with S. Akhtari and N. Saradha), Ramanujan J. 45 (2018), no. 2, 521-567
  • A note on Thue inequalities with few coefficients (with N. Saradha), Alladi60: Analytic Number Theory, Modular Forms and q-Hypergeometric Series, Springer Proc. Math. Stat., 221, Springer, Cham (2017), 665-675
  • Contributions to a conjecture of Mueller and Schmidt on Thue inequalities (with N. Saradha), Proceedings - Mathematical Sciences 127 (2017), no. 4, 565-584
  • On the number of non-zero digits of integers in multi-base representations (with Cs. Bertok, L. Hajdu and F. Luca), Publ. Math. Debrecen (2017) 90/1-2, 181-194.
  • Number of solutions of cubic Thue inequalities with positive discriminant (with N. Saradha), Acta Arith. 171 (2015), no. 1, 81-95
  • Simultaneous rational approximation via Rickert's Integrals  (with N. Saradha), Indag. Math. (N. S.) 26 (2015), 88-105.
  • Arithmetic nature of infinite series and integrals (with N. Saradha), Contemp. Math. (2015) 655, 191-207
  • Number of representations of integers by binary forms (with N. Saradha), Publ. Math. Debrecen 85/1-2 (2014); Corrigendum ibid. 86/3-4 (2015), 503-504


Book Chapter

  • Directed Energy deposition for Metals. Nitish P. Gokhle and Prateek Kala, in  ADDITIVE AND SUBTRACTIVE MANUFACTURING PROCESSES, 2022 , CRC press 

Journals

  1. 1."Gokhale, Nitish P; Gadakh, Deepak A; Kala, Prateek; ",Effect of Arc Polarity on the Quality of Deposition in GTAW Welding-Based Additive Manufacturing Process: A Preliminary Study,Journal of Advanced Manufacturing Systems,21,2,337-349,2022,World Scientific Publishing Company
  2. "Gokhale, Nitish P; Kala, Prateek; ",An Investigation into Dimensional and Mechanical Properties of Multilayered Metallic Structure Deposited Using TIG Based WAAM Process,Transactions of the Indian Institute of Metals,,,Jan-13,2022,Springer India
  3. "Parvanda, Rishi; Kala, Prateek; ",Process window identification for 3D printing low melting point alloy (LMPA) using fused deposition modelling (FDM),Rapid Prototyping Journal,,ahead-of-print,,2022,Emerald Publishing Limited
  4. "Patel, Lokesh Kumar; Singh, Aswani Kumar; Sharma, Varun; Kala, Prateek; ",Analysis of a hybrid ultrasonic horn profile using finite element analysis,Materials Today: Proceedings,41,,772-779,2021,Elsevier
  5. "Gokhale, Nitish P; Kala, Prateek; ",Thermal analysis of TIG-WAAM based metal deposition process using finite element method,Materials Today: Proceedings,44,,453-459,2021,Elsevier
  6. "Sharma, Varun; Shaik, Khaja Moinuddin; Choudhury, Archita; Kumar, Pramod; Kala, Prateek; Sultana, Yasmin; Shukla, Rahul; Kumar, Dalip; ",Investigations of process parameters during dissolution studies of drug loaded 3D printed tablets,"Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine",235,5,523-529,2021,"SAGE Publications Sage UK: London, England"
  7. "Parvanda, Rishi; Kala, Prateek; Sharma, Varun; ",Bibliometric Analysis-Based Review of Fused Deposition Modeling 3D Printing Method (1994–2020),3D Printing and Additive Manufacturing,,,,2021,"Mary Ann Liebert, Inc., publishers 140 Huguenot Street, 3rd Floor New …"
  8. "Gokhale, Nitish P; Kala, Prateek; ",Development of a deposition framework for implementation of a region-based adaptive slicing strategy in arc-based metal additive manufacturing,Rapid Prototyping Journal,,,,2021,Emerald Publishing Limited
  9. "Gokhale, Nitish P; Kala, Prateek; Sharma, Varun; Palla, Murali; ",Effect of deposition orientations on dimensional and mechanical properties of the thin-walled structure fabricated by tungsten inert gas (TIG) welding-based additive manufacturing process,Journal of Mechanical Science and Technology,34,2,701-709,2020,Korean Society of Mechanical Engineers
  10. "Singh, Aswani Kumar; Kumar, Amresh; Sharma, Varun; Kala, Prateek; ",Sustainable techniques in grinding: State of the art review,Journal of Cleaner Production,269,,121876,2020,Elsevier
  11. "Mehta, Aditya; Vaddadi, Sai Krishna; Sharma, Vinay; Kala, Prateek; ",A Phase-wise Analysis of Machine
    Learning based Human Activity Recognition using Inertial Sensors,2020 IEEE 17th India Council International Conference (INDICON),,,01-Jul,2020,IEEE
  12. "Sharma, Mohit; Sharma, Varun; Kala, Prateek; ",Optimization of process variables to improve the mechanical properties of FDM structures,Journal of Physics: Conference Series,1240,1,12061,2019,IOP Publishing
  13. "Nitish, P Gokhale; Kala, Prateek; Sharma, Varun; ",Experimental investigations of TIG welding based additive manufacturing process for improved geometrical and mechanical properties,Journal of Physics: Conference Series,1240,1,12045,2019,IOP Publishing
  14. "Gokhale, Nitish P; Kala, Prateek; Sharma, Varun; ",Thin-walled metal deposition with GTAW welding-based additive manufacturing process,Journal of the Brazilian Society of Mechanical Sciences and Engineering,41,12,01-Dec,2019,Springer Berlin Heidelberg
  15. "Kala, P; Sharma, V; ",Experimental investigations of TIG welding based additive manufacturing process for improved geometrical and mechanical properties,"2nd International Conference on New Frontiers in Engineering, Science and Technology, NFEST 2019",,,,2019,Institute of Physics Publishing
  16. "Kala, Prateek; Sharma, Varun; Pandey, Pulak M; ",Surface roughness modelling for double disk magnetic abrasive finishing process,Journal of Manufacturing Processes,25,,37-48,2017,Elsevier
  17. "Kala, Prateek; Pandey, Pulak M; ",Experimental investigations into ultrasonic-assisted double-disk magnetic abrasive finishing of two paramagnetic materials,"Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture",231,6,1021-1038,2017,"SAGE Publications Sage UK: London, England"
  18. "Kala, Prateek; Pandey, Pulak M; Verma, Girish C; Sharma, Varun; ",Understanding flexible abrasive brush behavior for double disk magnetic abrasive finishing based on force signature,Journal of Manufacturing Processes,28,,442-448,2017,Elsevier
  19.  "Sihag, Nitesh; Kala, Prateek; Pandey, Pulak M; ",Analysis of surface finish improvement during ultrasonic assisted magnetic abrasive finishing on chemically treated tungsten substrate,Procedia Manufacturing,10,,136-146,2017,Elsevier
  20. "Verma, Girish Chandra; Kala, Prateek; Pandey, Pulak Mohan; ",Experimental investigations into internal magnetic abrasive finishing of pipes,The international journal of advanced manufacturing technology,88,5,1657-1668,2017,Springer London
  21. "Sihag, Nitesh; Kala, Prateek; Pandey, Pulak M; ",Experimental investigations of chemo-ultrasonic assisted magnetic abrasive finishing process,International Journal of Precision Technology,5,03-Apr,246-260,2015,Inderscience Publishers (IEL)
  22. "Sihag, Nitesh; Kala, Prateek; Pandey, Pulak M; ",Chemo assisted magnetic abrasive finishing: experimental investigations,Procedia CIRP,26,,539-543,2015,Elsevier
  23. "Kala, Prateek; Pandey, Pulak M; ",Comparison of finishing characteristics of two paramagnetic materials using double disc magnetic abrasive finishing,Journal of Manufacturing processes,17,,63-77,2015,Elsevier
  24. "Kala, P; Pandey, PM; ",Comparison of finishing characteristics of two paramagnetic materials using double disc magnetic abrasive finishing. J Manuf Process 17: 63–70,,,,,2015,
  25. "Kala, Prateek; ",Experimental investigations and modeling of double disk magnetic abrasive finishing process,,,,,2015,IIT Delhi
  26. "Kala, Prateek; Pandey, Pulak M; ",Experimental study on finishing forces in double disk magnetic abrasive finishing process while finishing paramagnetic workpiece,Procedia Materials Science,5,,1677-1684,2014,Elsevier
  27. "Sihag, NITESH; Kala, PRATEEK; Pandey, PULAK M; ",Chemo-ultrasonic assisted magnetic abrasive finishing: experimental investigations,"5th International & 26th All India Manufacturing Technology, Design and Research Conference (AIMTDR 2014) December 12th–14th",,,,2014,
  28. "Kala, Prateek; Kumar, Sumit; Pandey, Pulak M; ",Polishing of copper alloy using double disk ultrasonic assisted magnetic abrasive polishing,Materials and Manufacturing Processes,28,2,200-206,2013,Taylor & Francis

Publications

Journal Publications

  1. Anil Kumar, Aneesh A. M and Anirudh Singh Rana, Modelling of phase change in nano-confinement using moment methods, Journal of Heat Transfer, 2022 (accepted, Q2).
  2. Atharva Modi and Anirudh Singh Rana, A Finite Difference Scheme for Non-Cartesian Mesh: Applications to Rarefied Gas Flows, Physics of Fluids 34, 072002, 2022 (Q1).
  3. T. C. De Fraja, A. S. Rana, R. Enright, L. J. Cooper, D. A. Lockerby, J. E. Sprittles, Efficient moment method for modeling nanoporous evaporation, Physical Review Fluids, Vol 7, page 024201, 2022 (Q1).
  4. Arsalan Taassob, Alireza Bordbar, Sasan Kheirandish, Amirreza Zarnaghsh, Reza Kamali and Anirudh Singh Rana, A review of rarefied gas flow in irregular micro/nanochannels, Journal of Micromechanics and Microengineering, 31, 113002, 2021 (Q2).
  5. A. S. Rana, V. K. Gupta, J. E. Sprittles, and M. Torrilhon, H-theorem and boundary conditions for the linear R26 equations: application to flow past an evaporating droplet, J. Fluid Mech., 924, A16, 2021 (Q1).
  6. A. S. Rana, S. Saini, S. Chakraborty, D. Lockerby, and J. E. Sprittles, Efficient simulation of non-classical liquid vapour phase-transition flows: A method of fundamental solutions, J. Fluid Mech., 919, A 35, 2021 (Q1).
  7. A. S. Rana, D. A. Lockerby, and J. E. Sprittles, Lifetime of a nanodroplet: Kinetic effects and regime transitions, Phys. Rev. Lett, 123, 154501, 2019 (Q1).
  8. A Rana, V Gupta, H Struchtrup, Coupled constitutive relations: a second law based higher-order closure for hydrodynamics, Proc. R. Soc. A, 474, 20180323, 2018 (Q1).
  9. A Beckmann, A Rana, M Torrilhon, H Struchtrup, Evaporation Boundary Conditions for the Linear R13 equations based on the Onsager Theory, Entropy, 20, 680, 2018 (Q2)
  10. A Rana, D Lockerby and J Sprittles, Evaporation-driven vapour microflows: analytical solutions from moment methods, J. Fluid Mech., 841, 962--988, 2018 (Q1).
  11. R Claydon, A Shrestha, A Rana, J Sprittles and D Lockerby, Fundamental solutions to the R13 Equations: Efficient computation of 3D kinetic effects, J. Fluid Mech., 833, R4, 2017 (Q1).
  12. H Struchtrup, A Beckmann, A Rana and A Frezzotti, Evaporation boundary conditions for the R13 equations of rarefied gas dynamics, Phys. Fluids, 29, 092004, 2017 (Q1).
  13. A Rana and H. Struchtrup, Thermodynamically admissible boundary conditions for the regularized 13 moment equations, Phys. Fluids, 28, 027105, 2016 (Q1).
  14. A Rana, R. Ravichandran, J. Park and R. Myong, Microscopic molecular dynamics characterization of the second order non-Navier-Fourier constitutive laws in Poiseuille gas flow, Phys. Fluids, 28, 082003, 2016 (Q1).
  15. A Mohammadzadeh, A Rana and H Struchtrup, DSMC and R13 modeling of the adiabatic surface, Int. J. Thermal Sciences, 101, 9-23, 2016 (Q1).
  16. A Mohammadzadeh, A Rana and H Struchtrup, Thermal stress vs. thermal transpiration: A competition in thermally driven cavity flows, Phys. Fluids, 27, 112001, 2015 (Q1).
  17. A Rana, A Mohammadzadeh and H Struchtrup, A numerical study of the heat transfer through a rarefied gas confined in a microcavity, Continuum Mech. Thermodyn., 27(3), 433--446, 2015 (Q1).
  18. A Rana, M Torrilhon and H Struchtrup, A robust numerical method for the R13 equations of rarefied gas dynamics: Application to lid driven cavity, J. Comput. Phys., 236, 169--186, 2013 (Q1).
  19. P Taheri, A Rana, M Torrilhon and H Struchtrup, Macroscopic description of steady and unsteady rarefaction effects in boundary value problems of gas dynamics, Continuum Mech.Thermodyn., 21(6), 423--443, 2009 (Q1).

Conference Proceedings

  1. A Rana, M Torrilhon and H Struchtrup, Numerical solution of the moment equations using kinetic flux-splitting schemes, AIP Conference Proceedings, 1501, 199--206, 2012. In proceedings of 28th International Symposium on Rarefied Gas Dynamics, Zaragoza, Spain, July 09--13, 2012
  2. A Rana, M Torrilhon and H Struchtrup, Heat transfer in micro devices packaged in partial vacuum, J. of Phys.: Conf. Series, 362, 012034, 2012. In proceedings of 1st European Conference on Gas Micro Flows, Skiathos Island, Greece, June 06--08, 2012.
  3. H Struchtrup, P Taheri and A Rana, Analytical and numerical solutions of boundary value problems for the regularized 13 Moment Equations,AIP Conference Proceedings,1333, 627--634, 2011>. In proceedings of 27th International Symposium on Rarefied Gas Dynamics, Pacific Grove, California, USA, July 10--15, 2010.

Publications

  1. G. Dwivedi, J.Tyagi, Biharmonic elliptic problems with second Hessian and gradient nonlinearities, Mathematische Nachrichten (Accepted), DOI: 10.1002/mana.202100069.
  2. G. Dwivedi, S. Gupta, Existence of solution to Kirchhoff type problem with gradient nonlinearity and a perturbation term, Journal of Elliptic and Parabolic Equations, 8, (2022), 533–553.DOI:10.1007/s41808-022-00164-x.
  3. S. Gupta, G. Dwivedi, Existence and multiplicity of solutions to N-Kirchhoff equations with critical exponential growth and a perturbation term, Complex Variables and Elliptic Equations,(2022), DOI: 10.1080/17476933.2022.2048297.
  4. S. Gupta, G. Dwivedi, An existence result for p-Laplace equation with gradient nonlinearity in R^N, Communications in Mathematics, Volume 30 Issue 1, (2022), DOI:10.46298/cm.9316.
  5. Shilpa, G. Dwivedi, Existence of solution to a nonlocal biharmonic problem with dependence on gradient and Laplacian, Journal of Applied Analysis, Volume 28, Issue 2, 2022, DOI:10.1515/jaa-2021-2073.
  6. G. Dwivedi, Generalized Picone Identity for Finsler p-Laplacian and Its Applications, Ukrains’kyi Matematychnyi Zhurnal (Ukrainian Mathematical Journal), Vol. 73, no. 11, (2021), 1451-1460, doi:10.37863/umzh.v73i11.1050.
  7. G. Dwivedi, Existence of Multiple solutions for a Kirchhoff type equation involving polyharmonic operator with exponential growth, Applied Mathematics E-Notes, 21(2021), 577-586.
  8. G. Dwivedi, Generalised Picone's identity and some Qualitative properties of p-sub-Laplacian on Heisenberg groups, Advances in the Theory of Nonlinear Analysis and its Applications, 5 (2021) No. 2, 232-239.
  9. G. Dwivedi, J. Tyagi, R.B. Verma, Stability of positive solution to fractional logistic equations, Funkcialaj Ekvacioj, Volume 62, Issue 1, (2019), 61-73.
  10. G. Dwivedi, J. Tyagi, R.B. Verma, On the bifurcation for fractional Laplace equations, Mathematische Nachrichten, Volume290, Issue16,(2017), 2597-2611, DOI: 10.1002/mana201600250.
  11. G. Dwivedi, J. Tyagi, Some qualitative questions on the equation -div(a(x; u;$\nabla u$)) = f(x; u), Journal of Mathematical Analysis and Applications, 446(2017), 456-469.
  12. G. Dwivedi, J. Tyagi, Erratum to: Singular Adams inequality for biharmonic operator on Heisenberg Group and its applications, Nonlinear Differential Equations and Applications NoDEA, 24(26), (2017).
  13. G. Dwivedi, J. Tyagi, Singular Adams Inequality for biharmonic operator on Heisenberg group and Its applications, Nonlinear Differential Equations and Applications NoDEA, (2016), 23:58.
  14. G. Dwivedi, J. Tyagi, Picone's identity for biharmonic operators on Heisenberg group and its applications, Nonlinear Differential Equations and Applications NoDEA, (2016), 23:10.
  15. G. Dwivedi, J. Tyagi, A Note on the Caccioppoli Inequality for Biharmonic Operators, Mediterranean Journal of Mathematics, 13, (2016), 1823-1828.
  16. G. Dwivedi, J. Tyagi, Remarks on the qualitative questions for biharmonic operators, Taiwanese Journal of Mathematics, Volume19, Number 6, (2015), 1743-1758.
  17. G. Dwivedi, Existence of solutions to the biharmonic systems with indefinite weights, Differential Equations and Applications, Volume 6, Number 4, (2014), 495-516.

Publication

Publications after joining BITS-Pilani Goa (2022 – Present)

 (# = equal contribution; * = corresponding author; IF = Impact Factor)

Book Edited

Dr. Kushal Sengupta, Dr. Sudipta Chatterjee, Dr. Kingshuk Dutta. Oxygen Reduction Reaction:
Fundamentals, Materials, and Applications, 1st Edition - June 14, 2022 by Elsevier. eBook ISBN: 9780323907200; Paperback ISBN: 9780323885089.

 Book Chapter
  1. Md E. Ahmed, S. Chattopadhyay, S. Chatterjee, K. Sengupta (2022); ‘Chapter 12 – Oxygen Reduction Reaction in Enzymatic Biofuel Cells’, Editor(s): K. Sengupta, S. Chatterjee, K. Dutta, Oxygen Reduction Reaction: Fundamentals, Materials, and Applications by Elsevier, Pages 427-466, ISBN 9780323885089. (DOI: https://doi.org/10.1016/B978-0-323-88508-9.00008-2)
  2. K. Mittra, S. Samanta, A. Singha, K. Sengupta, S. Chatterjee (2022); ‘Chapter 2 – Oxygen Reduction Reaction by Metalloporphyrins’, Editor(s): K. Sengupta, S. Chatterjee, K. Dutta, Oxygen Reduction Reaction: Fundamentals, Materials, and Applications by Elsevier, Pages 45-77, ISBN 9780323885089. (DOI: https://doi.org/10.1016/B978-0-323-88508-9.00003-3)
Journal Publications
  1. Y. Cai#, S. Chatterjee#, K. N. Salama, L. -J. Li, K. -W. Huang*; Sensing fugitive hydrogen emissions;Nat. Rev. Electr. Eng., 2024, 1, 201 - 211 (Comment) [Link] [IF = N/A]
  1. I. Dutta#, R. K. Parsapur#, S. Chatterjee, A. M. Hengne, D. Tan, K. Peramaiah, T. I. Solling, O. J. Nielsen, K.-W. Huang*; The Role of Fugitive Hydrogen Emissions in Selecting Hydrogen Carriers; ACS Energy Lett., 2023, 8, 3251 – 3257. (Viewpoint) [Link] [IF = 23.99]

 

Publications before joining BITS-Pilani Goa

Book Chapter

2. Chatterjee, I. Dutta, K.-W. Huang* (2021); ‘Chapter 8 – Power to Formic Acid’, in G. Spazzafumo (ed.) Power to Fuel: How to Speed up a Hydrogen Economy by Elsevier, Pages 169 – 210. (DOI: https://doi.org/10.1016/B978-0-12-822813-5.00006-0 ).

1. Chatterjee*, K. Sengupta (2020); ‘Chapter 6 – Carbon-Based Electrodes for Direct Methanol Fuel Cell’, in K. Dutta (ed.) Direct Methanol Fuel Cell Technology by Elsevier, Pages 135-176. (DOI: https://doi.org/10.1016/B978-0-12-819158-3.00006-9 ).

 

Publications From Post-doc

33. I. Dutta#, Chatterjee#, H. Cheng#, R. K. Parsapur#, Z. Liu,* Z. Li, E. Ye, H. Kawanami,* J. S. C. Low, Z. Lai, X. J. Loh,* K.-W. Huang*; Formic Acid to Power towards Low-Carbon Economy; Adv. Energy Mater., 2022, 2103799. (Perspective) [Link] [IF = 29.69]

32. Chatterjee#, R. K. Parsapur#, K.-W. Huang*; Limitations of Ammonia as a Hydrogen Energy Carrier for the Transportation Sector; ACS Energy Lett., 2021, 6, 4390 – 4394. (Viewpoint) [Link] [IF = 23.99]

31. Chatterjee#, I. Dutta#, Y. Lum, Z. Lai, K-W Huang*; Enabling Storage and Utilization of Low-Carbon Electricity: Power to Formic Acid; Energy Environ. Sci., 2021, 14, 1194 – 1246. (Review) [Link] [IF = 39.71]

30. P. K. Das, S. Bhunia, P. Chakraborty, Chatterjee, A. Rana, K. Peramaiah, M. M. Alsabban, I. Dutta, A. Dey*, and K-W. Huang*; Electrocatalytic Water Oxidation by a Phosphorus–Nitrogen O═PN3-Pincer Cobalt Complex; Inorg. Chem. 2021, 60, 614-622. [Link] [IF = 5.43]

29. R. K. Parsapur, Chatterjee, K.-W. Huang*; The Insignificant Role of Dry Reforming of Methane in CO2 Emission Relief; ACS Energy Lett., 2020, 5, 2881. (Viewpoint) [Link] [IF = 23.99]

28. Chatterjee, K.-W. Huang*; Unrealistic Energy and Materials Requirement for Direct Air Capture in Deep Mitigation Pathways; Nat. Commun., 2020, 11, 3287. (Matters Arising) [Link] [IF = 17.69]

27. I. M. DiMucci, J. T. Lukens, Chatterjee, K. M. Carsch, C. J. Titus, S. J. Lee, D. Nordlund, T. A. Betley, S. N. MacMillan, K. M. Lancaster*; The Myth of d8 Copper(III); J. Am. Chem. Soc., 2019, 141, 11508-11520. (Highlighted in Nature Reviews Chemistry) [Link] [IF = 16.38]

26. P. L. Dunn#, Chatterjee#, S. M. MacMillan, A. J. Pearce, K. M. Lancaster*, I. A. Tonks*; The 4-Electron Cleavage of a N═N Double Bond by a Trimetallic TiNi2 Complex; Inorg. Chem. 2019, 58, 11762-11772. [Link] [IF = 5.43]

25. T. Moore#, S. Chaterjee#, M. Tarrago#, L. J. Clouston, S. Sproules, E. Bill, V. Bernales, L. Gagliardi, S. Ye*, K. Lancaster*, C. C. Lu*; Enhanced Fe-centered Redox Flexibility in Fe-Ti Heterobimetallic Complexes; Inorg. Chem. 2019, 58, 6199-6214. [Link] [IF = 5.43]

 

Publications From Ph.D.

24. A. Sarkar, K. Sengupta, Chatterjee, M. Seal, P. Faller, S. Ghosh Dey, A. Dey*; Metal Binding to Aβ Peptides Inhibits Interaction with Cytochrome c: Insights from Abiological Constructs; ACS Omega, 2018, 3, 13994-14003 (selected as ‘ACS Authors’ Choice’). [Link] [IF = 4.13]

23. Chattopadhyay, A. Sarkar, S. Chatterjee, A. Dey*; Functional adlayers on Au electrodes: some recent applications in hydrogen evolution and oxygen reduction;J. Mater. Chem. A2018, 6, 1323-1339. (Invited Review) [Link] [IF = 14.51]

22. Chatterjee, K. Sengupta, B. Mondal, S. Dey, A. Dey*; Factors Determining the Rate and Selectivity of 4e/4H+ Electrocatalytic Reduction of Dioxygen by Iron Porphyrin Complexes;Acc. Chem. Res.2017, 50, 1744-1753. [Link] [IF = 24.46]

21. Dey, B. Mondal, S. Chatterjee, A. Rana, Sk Amanullah, A. Dey*; Molecular electrocatalysts for the oxygen reduction reaction;Nat. Rev. Chem.2017, 1, 0098. (Invited Review) [Link] [IF = 34.57]

20. Sengupta, S. Chatterjee, A. Dey*; In Situ Mechanistic Investigation of O2 Reduction by Iron Porphyrin Electrocatalysts Using Surface-Enhanced Resonance Raman Spectroscopy Coupled to Rotating Disk Electrode (SERRS-RDE) Setup; ACS Catal.,2016, 6, 6838-6852. (Invited Perspective) [Link] [IF = 13.70]

19. Chatterjee#, K. Sengupta#, S. Bandyopadhyay, A. Dey*; Ammonium Tetrathiomolybdate as a novel electrode material for Convenient Tuning of Kinetics of Electrochemical O2 Reduction by Iron Porphyrin Catalysts; J. Mater. Chem. A,2016, 4, 6819 (published in a themed issue of Emerging Investigators 2016: Novel design strategies for new functional materials). [Link] [IF = 14.51]

18. Sengupta#S. Chatterjee#, A. Dey*; Catalytic H2O2 disproportionation and electrocatalytic O2 reduction by functional mimic of Heme Catalase: direct observation of Compound 0 and Compound I in-situ; ACS Catal.,2016, 6, 1382 (selected as ‘ACS Editors’ Choice’). [Link] [IF = 13.70]

17. Mittra, K. Sengupta, A. Rana, S. Bandyopadhyay, S. Chatterjee, S. Samanta, A. Dey*; Second Sphere Control of Spin State: Differential Tuning of Axial Ligand Bonds in Ferric Porphyrin Complexes by Hydrogen Bonding; J. Inorg. Biochem. 2016, 155, 82. [Link] [IF = 4.33]

16. Chatterjee, K. Sengupta, S. Hematian, K. D. Karlin, A. Dey*; Electrocatalytic O2 Reduction by Synthetic Cytochrome C Oxidase Mimics: Identification of a ‘Bridging Peroxo’ Intermediate Involved in Facile 4e-/4H+ O2 Reduction; J. Am. Chem. Soc., 2015, 137, 12897. [Link] [IF = 16.38]

15. Chatterjee, K. Sengupta, S. Samanta, P. K. Das, A. Dey*; Concerted Proton-​Electron Transfer in Electrocatalytic O2 Reduction by Iron Porphyrin Complexes: Axial Ligands Tuning H​/D Isotope Effect; Inorg. Chem.,201554, 2383. [Link] [IF = 5.43]

14. S. Samanta, P. K. Das, Chatterjee, A. Dey*; Effect of axial ligands on electronic structure and O2 reduction by iron porphyrin complexes: Towards a quantitative understanding of the "push effect"; J. Porphyrins Phthalocyanines, 2015, 19, 92 (Invited Review). [Link] [IF = 1.91]

 13. K. Sengupta# Chatterjee#, D. Pramanik, S. Ghosh Dey*, A. Dey*; Self-​assembly of stable oligomeric and fibrillar aggregates of Aβ peptides relevant to Alzheimer's disease: morphology dependent Cu​/heme toxicity and inhibition of PROS generation; Dalton Trans.,201443, 13377-13383. [Link] [IF = 4.57]

12. S. Mukherjee, S. Bandyopadhyay, Chatterjee, A. Dey*; Electrocatalytic O2 reduction by a monolayer of hemin: the role of pKa of distal and proximal oxygen of a FeIII-​OOH species in determining reactivity; Chem. Commun., 2014, 50, 12304. [Link] [IF = 6.22]

11. K. Sengupta,  Chatterjee, S. Mukherjee, S. Ghosh Dey*, A. Dey*; Heme bound amylin self-​assembled monolayers on an Au electrode: an efficient bio-​electrode for O2 reduction to H2O; Chem. Commun.2014, 50, 3806. [Link] [IF = 6.22]

10. Mittra, S. Chatterjee, S. Samanta, A. Dey*; Selective 4e/4H+ O2 Reduction by an Iron(tetraferrocenyl)Porphyrin Complex: From Proton Transfer Followed by Electron Transfer in Organic Solvent to Proton Coupled Electron Transfer in Aqueous Medium; Inorg. Chem., 2013, 52, 14317-14325. [Link] [IF = 5.43]

9. Chatterjee, K. Sengupta, S. Dey, A. Dey*; Ammonium Tetrathiomolybdate: A Versatile Catalyst for Hydrogen Evolution Reaction from Water under Ambient and Hostile Conditions; Inorg. Chem.,201352, 14168-14177. [Link] [IF = 5.43]

8. S. Samanta, P. K. Das, Chatterjee, K. Sengupta, B. Mondal, A. Dey*; O2 Reduction Reaction by Biologically Relevant Anionic Ligand Bound Iron Porphyrin Complexes; Inorg. Chem.2013, 52, 12963-12971. [Link] [IF = 5.43]

7. Chatterjee, K. Sengupta, S. Samanta, P. K. Das, A. Dey*; Electrocatalytic O2 reduction reaction by synthetic analogues of cytochrome P450 and myoglobin: in-​situ resonance Raman and dynamic electrochemistry investigations;Inorg. Chem.2013, 52, 9897-9907. [Link] [IF = 5.43]

6. Sengupta, S. Chatterjee, S. Samanta, A. Dey*; Direct observation of intermediates formed during steady-​state electrocatalytic O2 reduction by iron porphyrins; Proc. Nat. Acad. Sci. U.S.A., 2013, 110, 8431 (Highlighted in Nature India-2013). [Link][IF = 12.78]

5. Sengupta, S. Chatterjee, S. Samanta, S. Bandyopadhyay, A. Dey*; Resonance Raman and Electrocatalytic Behavior of Thiolate and Imidazole Bound Iron Porphyrin Complexes on Self Assembled Monolayers: Functional Modeling of Cytochrome P450; Inorg. Chem., 2013, 52, 2000–2014 (highlighted in the virtual issue “Models of Metalloenzymes”) [Link] [IF = 5.43]

4. S. Samanta#, K. Mittra#, Sengupta, S. Chatterjee, A. Dey*; Second Sphere Control of Redox Catalysis: Selective Reduction of O2 to O2- or H2O by an Iron Porphyrin Catalyst; Inorg. Chem., 2013, 52, 1443–1453. [Link] [IF = 5.43]

3. Chatterjee, K. Sengupta, S. Bhattacharyya, A. Nandi, S. Samanta, K. Mittra, A. Dey*; Photophysical and ligand binding studies of metalloporphyrins bearing hydrophilic distal superstructure; J. Porphyrins Phthalocyanines, 2013, 17, 210-219 (Invited Article). [Link] [IF = 1.91]

2. K. Das, S. Chatterjee, S. Samanta, A. Dey*; EPR, Resonance Raman, and DFT Calculations on Thiolate- and Imidazole-​Bound Iron(III) Porphyrin Complexes: Role of the Axial Ligand in Tuning the Electronic Structure; Inorg. Chem., 2012, 51, 10704. [Link] [IF = 5.43]

1. K. Mittra, Chatterjee, S. Samanta, K. Sengupta, H. Bhattacharjee, A. Dey*; A hydrogen bond scaffold supported synthetic heme FeIII-​O2- adduct; Chem. Commun., 2012, 48, 10535-10537. [Link] [IF = 6.22]


Publications

Under Revision/Review:

Accepted Articles:
  • Kapil Choudhary, Rajiv Kumar and Rajesh Kumar: Global Classical and Weak Solutions of the Prion Proliferation Model in the Presence of Chaperone in a Banach Space, Evolution Equations and Control Theory, 2021. 
Published Articles:        
  • Prasanta Kumar Barik, Ankik Kumar Giri & Rajesh Kumar: Mass-conserving weak solutions to the coagulation and collisional breakage equation with singular rates, Article in Press, Kinetic and Related Models, 2020. 
  • Sonali Kaushik & Rajesh Kumar: Existence, Uniqueness and Mass Conservation for Safronov-Dubovski Coagulation Equation, under review in Acta Applicandae Mathematicae.
  • Sonali Kaushik, Rajesh Kumar & Fernando P Da Costa: Safronov-Dubovski Coagulation Equation: Existence, Mass Conservation and Differentiability for Sum Kernel.
  • Sanjiv Kr. Bariwal & Rajesh Kumar: Convergence of Weighted Finite Volume Scheme for Solving Coagulation-Fragmentation Equations. 
  • Kapil Choudhary, Rajiv Kumar and Rajesh Kumar: Existence of solutions of a prion-chaperone model including polymer joining, under review in Applicable Analysis.
  • Sanjiv Kr. Bariwal, Prasanta Kr. Barik, Ankik Kr. Giri & Rajesh Kumar: Finite volume convergence analysis for coagulation-fragmentation equations with singular rates, under review in Zeitschrift für angewandte Mathematik und Physik.
  • Sonali Kaushik & Rajesh Kumar: Steady-State Solution for Discrete Oort-Hulst-Safronov Coagulation Equation, under review in Int. J. of Dynamical Systems and Differential Equations
  • Nabil Bedjaoui, Rajesh Kumar & Youcef Mammeri: Asymptotic behavior of solution of Whitham-Broer-Kaup type equations with negative dispersion, Article in Press, Journal of Applied Analysis, 2020.
  • Rajiv Kumar, Kapil Kumar Choudhary and Rajesh Kumar: Study of the solution of a semilinear evolution equation of a prion proliferation model in the presence of chaperone in a product space, Mathematical Methods in the Applied Sciences, 1-14, 2020, https://doi.org/10.1002/mma.6894
  • Rajesh Kumar, Souvik Ghosh, Abhijit Datta Banik. Numerical Study on Transient Behavior of Finite Bulk Arrival or Service Queues with Multiple Working Vacations, Article in Press, Int. J. of Mathematics in Operational Research, 2020.
  • Rajesh Kumar, Yashodhan Gokhale, Vikranth Surasani. Population Balance Modeling with Coupled Agglomeration and Disintegration Processes for TiO2 Nanoparticles Formation and Experimental Validation, Journal of Cluster Science Including Nanoclusters and Nanoparticles, 2020, DOI: 10.1007/s10876-020-01895-4.
  • Rajesh Pradhan, Siddhanth Hejmady, Rajeev Taliyan, Rajesh Khadgawat, Tarang Gupta, Garima Kachhawa, Rajesh Kumar, Gautam Singhvi & Sunil Kumar Dubey, Simultaneous estimation of parabens and bisphenol a in ready-to-eat foodstuffs by using QbDdriven high-pressure liquid chromatography method, International Journal of Environmental Analytical Chemistry, 2020, https://doi.org/10.1080/03067319.2020.1756272
  • Suresh Pathi, Rajesh Kumar, Vikranth Kumar Surasani. Investigation on agglomeration kinetics of acetaminophen using fluidized bed wet granulation, Asia-Pacific Journal of Chemical Engineering, 2020, 
  • Daniel Kressner, Rajesh Kumar, Fabio Nobile and Christine Tobler: Low rank tensor approximation for high-order      correlation functions of Gaussian random fields, SIAM/ASA J. Uncertainty Quantification 3(1), 393-416, 2015.  
  • Rajesh Kumar,Jitendra Kumar and Gerald Warnecke: Convergence analysis of a finite volume scheme for solving non-linear aggregation-breakage population balance equations, Kinetic and Related Models 7(4), 713-737, 2014.
  • Rajesh Kumar,Jitendra Kumar and Gerald Warnecke: Moment preserving finite volume schemes for solving population balance equations incorporating aggregation, breakage, growth and source terms, Mathematical Models and Methods in Applied Sciences 23(07), 1235-1273, 2013.
  • Rajesh Kumar and Jitendra Kumar: Numerical simulation and convergence analysis of a finite volume scheme for solving general breakage population balance equations, Applied Mathematics and Computation 219(10), 5140-5151, 2013.
  • Rajesh Kumar and Jitendra Kumar: A population balance model with simultaneous aggregation and breakage for the synthesis of Titanium dioxide nanoparticles, Indian Journal of Indus. & Appl. Math. 4(1), 71-81, 2013. Special issue dedicated to Prof. Helmut Neunzert.
  • Rajesh Kumar and Jitendra Kumar: Finite volume scheme for multiple fragmentation equations, Int. Journal of Numerical Analysis and Modeling 3(3), 270-284, 2012.
  • Rajesh Kumar, Jitendra Kumar and Gerald Warnecke: Numerical methods for solving two-dimensional aggregation population balance equations, Computers and Chemical Engineering Science 35, 999-1009, 2011.
  • Y. Gokhale, R. Kumar, J. Kumar, W. Hintz, G. Warnecke and J. Tomas: Disintegration process of surface stabilized sol-gel TiO2 nanoparticles by population balances, Chemical Engineering Science 64, 5302-5307, 2009. 
 Published Book (Monograph):
 
1. Numerical analysis of finite volume schemes for population balance equations, Docupoint Wissenschaft, Magdeburg, Germany, ISBN-978-3869121055, PhD Thesis 2012.
 
Technical Report/Theses:
 
1. D. Kressner, R. Kumar, F. Nobile and C. Tobler: Low rank tensor approximation for high order correlation functions of Gaussian random fields, Mathicse Technical Report, EPFL, Switzerland, No. 24, 2014. 
2. T. A. Airaksinen, Yu He, T. W. Kinyanjui, R. Kumar, K. Ristic, C. A. Zarzer: Paint Drying With UV Rays. ECMI modelling week report. Copy available at

 

Refereed Journal Articles

  • Pasari S (2023) Nowcasting earthquakes in Iran: A quantitative analysis of earthquake hazards through natural times, Journal of African Earth Sciences, 198:104821 (SCI) (Elsevier).
  • Pasari S, Verma H, Sharma Y, Neha (2023) Spatial distribution of seismic cycle progression in Northeast India and Bangladesh regions inferred from natural time analysis, Acta Geophysica, 71, 89-100 (SCIE) (Springer).
  • Shukla S, Sheoran S, Pasari S (2022) Exploration of solar irradiance in Thar desert using time series models, Applied Solar Energy, 58, 876-888 (Scopus) (Springer).
  • Sheoran S, Shukla S, Pasari S, Singh RS, Kulshrestha R (2022) Wind speed forecasting at different time scales using time series and machine learning models, Applied Solar Energy, 58, 708-721 (Scopus) (Springer).
  • Sheoran S, Pasari S (2022) Efficacy and application of the window-sliding ARIMA for daily and weekly wind speed forecasting, Journal of Renewable and Sustainable Energy, 14, 053305 (SCIE) (AIP Publishing).
  • Sheoran S, Singh RS, Pasari S, Kulshrestha R (2022) Forecasting of solar irradiances using time series and machine learning models: A case study from India, Applied Solar Energy, 58(1), 137-151 (Scopus) (Springer).
  • Pasari S, Neha (2022) Nowcasting based earthquake hazard estimation at major cities in New Zealand, Pure and Applied Geophysics, 179, 1597-1612 (SCI) (Springer).
  • Neha, Pasari S (2022) A review of empirical orthogonal function (EOF) with an emphasis on the co-seismic crustal deformation analysis, Natural Hazards, 110(1), 29-56 (SCIE) (Springer).
  • Pasari S, Simanjuntak AVH, Neha, Sharma Y (2021) Nowcasting earthquakes in Sulawesi Island, Indonesia, Geoscience Letters, 8(27), 1-13 (SCIE) (Springer). 
  • Pasari S, Simanjuntak AVH, Mehta A, Neha, Sharma Y (2021) A synoptic view of the natural time distribution and contemporary earthquake hazards in Sumatra, Indonesia, Natural Hazards, 108(1), 309-321 (SCIE) (Springer).
  • Pasari S, Sharma, Y, Neha (2021) Quantifying the current state of earthquake hazards in Nepal, Applied Computing and Geosciences 10, 100058 (Scopus) (Elsevier).
  • Pasari S, Simanjuntak AVH, Mehta A, Neha, Sharma Y (2021) The current state of earthquake potential in Java island, Indonesia, Pure and Applied Geophysics, 178, 2789-2806 (SCI) (Springer).
  • Sharma Y, Pasari S, Ching KE, Dikshit O, Kato T, Malik JN, Chang CP, Yen JY (2020) Spatial distribution of earthquake potential along the Himalayan arc, Tectonophysics 791, 228556 (SCI) (Elsevier).
  • Pasari S, Sharma Y (2020) Contemporary earthquake hazards in the west-northwest Himalaya: A statistical perspective through natural times, Seismological Research Letters, 91 (6): 3358-3369 (SCI) (SSA).
  • Tiwari A, Narayan AB, Dwivedi R, Swadeshi A, Pasari S, Dikshit O (2020) Geodetic investigation of landslides and land subsidence: case study of the Bhurkunda coal mines and the Sirobagarh landslide, Survey Review, 52 (371): 134-149 (SCI) (Taylor & Francis).
  • Pasari S (2019) Inverse Gaussian versus lognormal distribution in earthquake forecasting: keys and clues, Journal of Seismology 23(3): 537–559 (SCI) (Springer).
  • Pasari S (2019) Nowcasting earthquakes in the Bay-of-Bengal Region, Pure and Applied Geophysics 176(4): 1417–1432 (SCI) (Springer). 
  • Pasari S (2018) Stochastic modeling of earthquake interoccurrence times in northwest Himalaya and adjoining regions, Geomatics, Natural Hazards and Risk 9(1): 568–588 (SCIE) (Taylor & Francis).
  • Pasari S, Dikshit O (2018) Stochastic earthquake interevent time modeling from exponentiated Weibull distributions, Natural Hazards 90(2): 823–842 (SCIE) (Springer).
  • Pasari S, Nandi NC (2017) Modelling Tree Diameter Distribution with a Case Study from Garhbeta Sal Coppice Forest, Paschim Medinipur District, West Bengal, Journal of Environment and Sociobiology 14(2):171–178 (UGC Care) (SEBA).
  • Pasari S, Dikshit O (2015) Earthquake interevent time distribution in Kachchh, northwestern India, Earth, Planets and Space 67:129 (SCI) (Springer).
  • Pasari S, Dikshit O (2015) Distribution of earthquake interevent times in northeast India and adjoining regions, Pure and Applied Geophysics 172(10):2533–2544 (SCI) (Springer).
  • Pasari S, Dikshit O (2014) Three-parameter generalized exponential distribution in earthquake recurrence interval estimation, Natural Hazards 73:639–656 (SCIE) (Springer).
  • Pasari S, Dikshit O (2014) Impact of three-parameter Weibull models in probabilistic assessment of earthquake hazards, Pure and Applied Geophysics 171(7):1251–1281 (SCI) (Springer).

  Refereed Book Chapters/ Conference Articles

  • Sonthalia A, Pasari S, Devi S (2023) Earthquake prediction using LSTM on spatio-temporally segmented data, Proceedings of the 3rd International Conference on Artificial Intelligence and Smart Systems (ICAIS), 1378-1382, Tamilnadu, India (in IEEE Xplore).
  • Gupta K, Shukla S, Pasari S, Sheoran S (2023) Wind speed prediction using Sentinel-1 OCN products, Proceedings of the 3rd International Conference on Artificial Intelligence and Smart Systems (ICAIS), 1145-1149, Tamilnadu, India (in IEEE Xplore).
  • Sheoran S, Pasari S, Shukla S (2022) Application of window sliding ARIMA in wind speed and solar irradiance forecasting, Proceedings of the 7th International Conference on Recent Advances and Innovations in Engineering (ICRAIE), 321-325, NIT Surathkal, India (in IEEE Xplore).
  • Shukla S, Sheoran S, Pasari S (2022) Prediction of solar energy using time series methods, Proceedings of the International Conference on Automation, Computing and Renewable Systems (ICACRS), 72-76, Pudukottai (Tamilnadu), India (in IEEE Xplore).
  • Bharadwaj RK, Pasari S, Devi S (2022) Earthquake magnitude prediction in Chile using neural network, Proceedings of the 7th International Conference on Recent Advances and Innovations in Engineering (ICRAIE), 294-297, NIT Surathkal, India (in IEEE Xplore).
  • Shukla S, Ramprasad R, Pasari S, Sheoran S (2022) Statistical analysis and forecasting of wind speed, Proceedings of the 4th International Conference on Energy, Power and Environment (ICEPE), 1-6, NIT Meghalaya, Shillong, India (in IEEE Xplore).
  • Sharma A, Ahuja A, Devi S, Pasari S (2022) Use of spatio-temporal features for earthquake forecasting of imbalanced data, 2022 International Conference on Intelligent Innovations in Engineering and Technology (ICIIET), 178-182, Coimbatore, India (in IEEE Xplore).
  • Rathi A, Pasari S, Sheoran S (2022) Live sign language recognition, Proceedings of the 8th International Conference on Advanced Computing and Communication Systems (ICACCS), 502-505, Coimbatore, India (in IEEE Xplore).
  • Bhargava B, Pasari S (2022) Earthquake prediction using deep neural networks, Proceedings of the 8th International Conference on Advanced Computing and Communication Systems (ICACCS), 476-479, Coimbatore, India (in IEEE Xplore).
  • Kumar A, Pasari S, Mehta A, Verma H (2022) Impact of directional effect of strong ground motion on scenario based earthquake hazards: Preliminary results, Conference proceedings of the 2nd International Conference on Advances in Earth and Environmental Sciences (AEES), 1032: 012042, NIT Raipur, India (IOP Science).
  • Agrawal AK, Verma H, Pasari S (2022) INSAR data analysis using deep neural networks, Conference proceedings of the 2nd International Conference on Advances in Earth and Environmental Sciences (AEES), 1032: 012025, NIT Raipur, India (IOP Science).
  • Dave P, Pasari S (2022) Effectiveness of PNL technique in disaster damage assessment: Evidence from selective case studies, Conference proceedings of the 2nd International Conference on Advances in Earth and Environmental Sciences (AEES), 1032: 012005, NIT Raipur, India (IOP Science).
  • Pasari S, Asudani P, Mehta A (2022) Machine learning algorithms in geostatistical data analysis: Formulation and observation, Conference proceedings of the 2nd International Conference on Advances in Earth and Environmental Sciences (AEES), 1032: 012008, NIT Raipur, India (IOP Science).
  • Sheoran S, Bavdekar R, Pasari S, Kulshrestha R (2022) Wind speed forecasting using time series methods: a case study. In Chamola BP, Kumari P, Kaur L (eds) Emerging Advancements in Mathematical Sciences, 125-133 (Nova publishing). 
  • Ahuja A, Pasari S (2022) Forecasting earthquakes in the Himalayan region using neural network models. In Kanga S, Meraj G, Farooq M, Singh SK, Nathawat MS (eds) Disaster Management in the Complex Himalayan Terrains: Natural Hazard Management, Methodologies and Policy Implications, 141-152 (Springer).
  • Pasari S (2022) Estimation of current earthquake hazard through nowcasting method, In Srinivas R, Kumar R, Dutta M (eds) Advances in Computational Modeling and Simulation, 55-60 (Springer).
  • Verma H, Sharma Y, Pasari S (2022) Synthetic aperture radar interferometry to measure earthquake related deformation: A case study from Nepal. In Kanga S, Meraj G, Farooq M, Singh SK, Nathawat MS (eds) Disaster Management in the Complex Himalayan Terrains: Natural Hazard Management, Methodologies and Policy Implications, 133-140 (Springer).
  • Mallikarjuna K, Pasari S, Tiwari K (2022) Hierarchical classification using neighborhood exploration for sparse text tweets, Proceedings of the 12th International Conference on Cloud Computing, Data Science and Engineering (Confluence), 30-33, Noida, India (in IEEE Xplore).
  • Agrawal T, Sheoran S, Pasari S, Shukla S (2022) Wind speed prediction with spatio-temporal correlation using convolutional and spiking neural networks, Proceedings of the 12th International Conference on Cloud Computing, Data Science and Engineering (Confluence), 199-203, Noida, India (in IEEE Xplore).
  • Mehta A, Pasari S (2021) Hyperspectral image clustering using nearest neighbor, Conference proceedings of the IEEE India Geoscience and Remote Sensing Symposium (InGARSS), 194-197, Ahmedabad (in IEEE Xplore).
  • Pasari S, Agarwal P, Neha (2021) Use of Shannon information entropy in earthquake nowcasting, Conference proceedings of the IEEE India Geoscience and Remote Sensing Symposium (InGARSS), 222-225, Ahmedabad (in IEEE Xplore).
  • Neha, Marwah R, Pasari S (2021) Application of empirical orthogonal function on geodetic time-series data, Conference proceedings of the IEEE India Geoscience and Remote Sensing Symposium (InGARSS), 198-201, Ahmedabad (in IEEE Xplore).
  • Neha, Mehrotra S, Verma H, Pasari S (2021) Iterative empirical orthogonal function in gap filling of GPS and InSAR data, Conference proceedings of the IEEE India Geoscience and Remote Sensing Symposium (InGARSS), 496-499, Ahmedabad (in IEEE Xplore).
  • Verma H, Pasari S, Sharma Y (2021) Tectonic deformation along the Delhi-Haridwar ridge revealed by INSAR observations, Conference proceedings of the IEEE India Geoscience and Remote Sensing Symposium (InGARSS), 181-184, Ahmedabad (in IEEE Xplore).
  • Buvanesh A, Pasari S (2021) Modeling war phenomena with an emphasis on operation research, 12th International Conference on Computing Communication and Networking Technologies (ICCCNT), 1-4, IIT Kharagpur (in IEEE Xplore).
  • Dave P, Pasari S (2021) A study of after-effects of Kerala floods using VIIRS-OLS nighttime light data, In Kulshrestha R, Shekhar C, Jain M, Chakravarthy SR. (eds) Mathematical Modeling and Computation of Real Time Problems: An Interdisciplinary Approach, 195-201 (CRC Press).
  • Sharma Y, Pasari S, Neha (2021) Indian plate motion revealed by GPS observations: Preliminary results, In: Kulshrestha R, Shekhar C, Jain M, Chakravarthy SR. (eds) Mathematical Modeling and Computation of Real Time Problems: An Interdisciplinary Approach, 203-213 (CRC Press).
  • Pasari S, Shah A, Sirpurkar U (2020), Wind energy prediction using artificial neural networks, 3rd Indo-German conference on sustainability engineering, In: Sangwan K., Herrmann C. (eds) Enhancing Future Skills and Entrepreneurship. Sustainable Production, Life Cycle Engineering and Management, 101-107 (Springer).
  • Pasari S, Shah A (2020), Time series ARIMA model for renewable energy forecasting, In: Sangwan K., Herrmann C. (eds) Enhancing Future Skills and Entrepreneurship. Sustainable Production, Life Cycle Engineering and Management, 71-77 (Springer).
  • Pasari S, Koundinya NVSS (2020), Statistical modeling of solar energy, In: Sangwan K., Herrmann C. (eds) Enhancing Future Skills and Entrepreneurship. Sustainable Production, Life Cycle Engineering and Management, 157-165 (Springer).
  • Pasari S (2020), Stochastic Modeling of Earthquake Interevent Counts (Natural Times) in Northwest Himalaya and Adjoining Regions, In: Bhattacharyya S., Kumar J., Ghoshal K. (eds), Mathematical Modeling and Computational Tools. Springer Proceedings in Mathematics & Statistics, 320, 495-501 (Springer).
  • Pasari S, Mehta A (2018), Nowcasting earthquakes in the northwest Himalaya and surrounding regions, ISPRS-International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences, XLII-5, 855-859.
  • Sharma Y, Pasari S, Dikshit O, Ching K E (2018), GPS-based monitoring of crustal deformation in Garhwal-Kumaun Himalaya, ISPRS-International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences, XLII-5, 451-454.
  • Bhatia A, Pasari S, Mehta A (2018), Earthquake forecasting using artificial neural networks, ISPRS-International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences, XLII-5, 823-827.
  • Pasari S (2017) Reliability of an Earthquake System: A Case Study from Eastern Himalaya, International Conference on Disaster Risk Mitigation (ICDRM), BUET-JIDPUS Campus, Dhaka, Bangladesh, 23-24 September, 2017 (Conference proceedings).
  • Pasari S (2017) Design of earthquake catastrophe insurance scheme in northwest Himalaya: A preliminary study, Indian Cartographer 37:354-357.
  • Pasari S, Varade DM, Dikshit O (2014) Probabilistic assessment of earthquake recurrence in northeast India: an appraisal from inverse Gaussian distribution, in: Sundaresan J, Gupta P, Santosh KM, Boojh R (eds) Climate Change and Himalaya–Natural Hazards and Mountain Resources, Scientific Publishers (India), 241–250.
  • Pasari S, Dikshit O (2013) Probabilistic assessment of earthquake hazards in Northeast India and its adjoining regions: an appraisal from Frechet distribution, Indian Cartographer 33:434-437.

Conference Presentations 

  • Pasari S (2019) Statistical distribution of natural times: A new view of earthquake hazard assessment, Asia Oceania Geosciences Society (AOGS) 16th Annual Meeting, Singapore, 28 July – 02 August, 2019.
  • Pasari S (2019) Distribution of tsunami interevent times in the Indian Ocean, Asia Oceania Geosciences Society (AOGS) 16th Annual Meeting, Singapore, 28 July – 02 August, 2019.
  • Pasari S (2018) Seismotectonic Modeling in the Bay-of-Bengal Region, AOGS-EGU Joint Conference, Tagaytay, Phillipines, February 04-08, 2018.
  • Pasari S (2016) Scope of Earthquake Insurance in Indian Cities, India International Science Festival (IISF 2016), National Physical Laboratory, New Delhi, India, 8–11 December, 2016.
  • Pasari S (2016) Computational Earthquake Physics: Insights from Geodetic and Stochastic Modelling, National Conference on Emerging Trends in Physics of Fluids and Solids (NCETPFS 2016), Jadavpur University, Kolkata, India, 03-04 March, 2016.
  • Pasari S (2016) Computational Earthquake Modeling: Insights from a Class of Exponentiated Distributions, National Conference on Optimization and Computational Mathematics (NCOCM 2016), Vidyasagar University, West Bengal, March 01-02, 2016.
  • Pasari S (2015) Comparison of Inverse Gaussian and Lognormal Distributions in Earthquake Hazard Assessment, India International Science Festival (IISF 2015), IIT Delhi, India, 04-08 December, 2015.
  • Pasari S, Kato T, Dikshit O (2014) Geodetic and seismic investigations of crustal deformation in NW Himalaya, American Geophysical Union (AGU) Fall Meeting, San Francisco, USA, 15–19 December, 2014
  • Pasari S, Dikshit O (2014) Distribution of earthquake interevent times in Northwest Himalaya, India, Geodynamics and Environment in East Asia (GEEA) Symposium, Taipei, Taiwan, 12–15 November, 2014.
  • Pasari S, Dikshit O, Kato T, Malik J, Okumura K (2014) Slip rate estimation using GPS measurements in Northwest Himalaya: preliminary results, Asia Oceania Geosciences Society (AOGS) 11th Annual Meeting, Sapporo, Japan, 28 July–01 August, 2014.
  • Pasari S, Dikshit O (2014) Probabilistic earthquake hazard assessment with exponentiated Rayleigh distribution: a case study from Northeast India, Asia Oceania Geosciences Society (AOGS) 11th Annual Meeting, Sapporo, Japan, 28 July–01 August, 2014.
  • Malik JN, Sahoo S, Okumura K, Pasari S, Dikshit O, Kato T (2014) Active fault and paleoseismological investigations in the Kangra Valley, NW Himalaya. Asia Oceania Geosciences Society (AOGS) 11th Annual Meeting, Sapporo, Japan, 28 July–01 August, 2014.
  • Pasari S, Kato T, Dikshit O, Malik J, Okumura K (2014) Geodetic investigation of crustal deformation and strain rate in the Northwest Himalaya, International Symposium on Geodesy for Earthquake and Natural Hazards (GENAH 2014), Matsushima, Miyagi, Japan, 22–25 July, 2014.
  • Pasari S, Dikshit O (2013) Probabilistic assessment of earthquake hazards: an appraisal from exponential group of distributions. International Symposium on Advances in Earthquake Sciences (AES), ISR Gandhinagar, 01–02 February, 2013.
  • Okumura K, Malik JN, Dikshit O, Kato T, Sahoo S, Pasari S, Mohanty A, Takemoto H (2012) Active tectonics and paleoseismology of the Himalayan front in the Kangra-Dharamsala area, Japan Geoscience Union Meeting (JPGU), Makuhari Messe, Japan, 20–25 May, 2012.

Publications

Published/Accepted

  • Amiya K. Pani and Sangita Yadav, An hp-local discontinuous Galerkin method for parabolic integro-di erential equations, J. Sci. Comput, 46 (2011), pp 71-99. 
  • Sangita Yadav, Amiya K Pani and E.-J. Park, Superconvergent discontinuous Galerkin methods for nonlinear elliptic equations, Math. Comp., 82 (2013), pp 1297-1335.
  • Sangita Yadav, Amiya K. Pani and Neela Nataraj, Superconvergent discontinuous Galerkin methods for nonselfadjoint and inde nite elliptic problems, J. Sci. Comput., 54 (2013), pp 45-76.
  • Deepjyoti Goswami, Amiya K. Pani and Sangita Yadav, Optimal error estimates of two mixed finite element methods for parabolic integro-differential equations with nonsmooth initial data, J. Sci. Comp., 56 (2013), pp 131-164.
  • Sarvesh Kumar and Sangita Yadav, Modified Method of Characteristics Combined with Finite Volume Element Methods for Incompressible Miscible Displacement Problems in Porous Media, International Journal of PDEs, 2014 (2014), pp 1-16.
  • Deepjyoti Goswami, Amiya K. Pani and Sangita Yadav, Optimal L2 estimates for semidiscrete Galerkin method applied to parabolic integro-differential equations with nonsmooth data, ANZIAM J., 55(2014), pp 245-266.
  • Samir Kara, Amiya K. Pani and Sangita Yadav,A priori hp-estimates for discontinuous Galerkin approximations to linear hyperbolic integro-differential equations, Appl. Numer. Math., 96(2015), pp 1-23.
  • Sangita Yadav and Amiya K Pani, Superconvergence of  a class of Expanded Discontinuous Galerkin Methods for Fully Nonlinear Elliptic Problems in Divergence Form, J. Comput. Appl. Math., 333(2018), pp 215-234.
  • Sangita Yadav and Amiya K Pani, Superconvergent Discontinuous Galerkin Methods for Nonlinear Parabolic Initial and Boundary Value Problems, Journal of Numerical Mathematics, J. Numer. Math.  27 (2019), 183-202.

Preprints

  • Deepjyoti Goswami, Amiya K. Pani and Sangita Yadav, Optimal L2-estimates for semidiscrete Galerkin methods for parabolic integro-di fferential equations withnonsmooth data", OCCAM pre prints [09/38].
  • Amiya K. Pani and Sangita Yadav, An hp-local discontinuous Galerkin method for parabolic integro-di fferential equations", OCCAM pre prints [09/30].
  • Deepjyoti Goswami, Amiya K. Pani and Sangita Yadav, Optimal Error Estimates of a Mixed Finite Element Method for Parabolic Integro-Di fferential Equations with Non Smooth Initial Data", OCCAM pre prints [10/41].

Publications

 

Journal Publications:

  1. Numerical investigation of a conducting drop's interaction with an interface between dielectric-conducting fluids under an external electric field, European Journal of Mechanics: B/Fluids, 81 (2020) 114–123, Elsevier.
  2. Numerical simulations of bubble formation from a submerged orifice and a needle: The effects of an alternating electric field, European Journal of Mechanics: B/Fluids, vol.: 56, pages: 97-109, 2016, Elsevier.
  3. Numerical simulations of bubble formation from submerged needles under non-uniform direct current electric field, Physics of Fluids, vol.: 25, no.: 10, pages: 102-104, 2013, AIP Publishing.
 

 

PUBLICATION OF EDITED BOOK as Editor.
1. Madhu Jain, Dinish K. Sharma, Rakhee Kulshrestha, H.S. Hota (eds): Applications of Mathematical Modeling, Machine Learning, and Intelligent Computing for Industrial Development. CRC Press, Taylor and Francis Group, 2023. ISBN: 9781032392646.
 
2. Rakhee Kukshrestha, Chandra Shekhar, Madhu Jain and S.R. Chakravarty(eds): Mathematical Modelling and Computation of Real-Time Problems: An Interdisciplinary Approach. CRC Press, Taylor & Francis Group, 2021.
Book/Monograph
Savita Kumari, Seema Verma, Rakhee Kulshrestha “Performance Evaluation of Indexing Techniques for Wireless Environment” LAMBERT Academic Publishing, Germany, February 2012.

e-Book Chapter
  1. Seema Verma, Rakhee and Savita KumariData broadcast management in wireless communication: An emerging research area, Applied Signal and Image Processing: Multidisciplinary Advancements. IGI Publishing, 2011.
    •  Release Date: March, 2011;
    • DOI: 10.4018/978-1-60960-477-6;
    • ISBN13: 9781609604776;
    • ISBN10: 1609604776;
    • EISBN13: 9781609604783.

Paper Published in Refereed National/International Journals

  1. Vijaypal Poonia, Rishi Kumar, Rakhee Kulshrestha, Kuldip Singh Sangwan (2023), Optimization of Specific Energy Consumption, Scrap and Surface Roughness during 3D Printing Using Integrated ANN-GA Approach, 30th CIRP Life Cycle Engineering Conference. (Accepted)
  2. Sarita Sheoran, Sakshi Shukla, Sumanta Pasari, Raj Shree Singh, Rakhee Kulshrestha (2022) Wind Speed Forecasting at Different Time Scales using Time Series and Machine Learning Models, Applied Solar Energy, Vol. 58 (5).
  3. Vaishnawi, M., Upadhyaya, S. & Kulshrestha, R. (2022), Optimal Cost Analysis for Discrete-Time Recurrent Queue with Bernoulli Feedback and Emergency Vacation. Int. J. Appl. Comput. Math 8, 254. https://doi.org/10.1007/s40819-022-01445-8
  4. Savita Sheoran, RS Singh, S. Pasari, Rakhee (2022) Forecasting of solar irradiances using time series and machine learning models: A case study from India, Applied Solar Energy, 58(1):137-151, (Springer).
  5. Shruti Goel and Rakhee Kulshrestha (2022),  Queueing Based Spectrum Management in Cognitive Radio Networks with Retrial and Heterogeneous Service Classes, Journal of Ambient Intelligence and Humanized Computing, 13, 2429–2437. (IF: 7.104) (SCIE) (Q1: SJR 0.91)
  6. Shruti and Rakhee Kulshrestha (2022), Analysis of Spectrum Sensing and Spectrum Access in Cognitive Radio Networks with Heterogeneous Traffic and p-Retry Buffering, IEEE Transactions on Mobile Computing, 21 (7), 2318-2331.  (IF: 5.112) (Q1, SJR:1.28)
  7. Rakhee Kulshrestha and Shruti (2021), Performance Evaluation of Call Admission Control Based on Signal Quality in Cellular Mobile Networks. International Journal of Mathematics in Operational Research, Inderscience, 20(1), 1-19. [SCOPUS Indexed] (Q3: SJR:0.35) 
  8. Shruti and Rakhee Kulshrestha (2020), Channel Allocation and Ultra Reliable Communication in CRNs with Heterogeneous Traffic and Retrials: A Dependability Theory-Based Analysis. Computer Communications, Elsevier, 158, 51-63. [SCIE]   
  9. Srinivas R.ChakravarthyShrutiRakhee Kulshrestha, A queueing model with server breakdowns, repairs, vacations, and backup server, Operations Research Perspectives, vol. 7 (2019),Article ID 1001313. [ESCI]https://doi.org/10.1016/j.orp.2019.100131. 
  10. Rakhee Kulshrestha, Madhu Jain and Shruti, Performance Analysis of Fractional Guard Channel Scheme with Buffer for Cellular Mobile Networks, Proceedings of the National Academy Science, India, Section A Physical Sciences, July 2019https://doi.org/10.1007/s40010-019-00635-2. (Impact Factor:0.681) [SCIE]
  11. Rakhee Kulshrestha, Achal Agarwal and Shruti, An Adaptive Fractional Guard Channel Based CAC Scheme for Heterogeneous Traffic in Wireless Cellular Networks, 2019 6th International Conference on “Computing for Sustainable Global Development”, 13th - 15th March, 2019 (Published in IEEE xplore digital library) [SCOPUS Indexed] 
  12. Vishal Gupta, Amrit Kochar, Sahil Saharan and Rakhee Kulshrestha, DNS Amplification Based DDoS Attacks in SDN Environment: Detection and Mitigation, 2019 IEEE 4th International Conference on Computer and Communication Systems (ICCCS). IEEE, 2019. Doi: 10.1109/CCOMS.2019.8821716 [SCOPUS Indexed]. “Received Best Presented Paper Award”.
  13. Vaibhav, Rakhee, Srikant Routray. State of the art literature review on Inventory Models for Perishable Products, Journal of Advances in Management Research, March 2018. (ESCI). DOI: 10.1108/JAMR-09-2017-0091.
  14. Ram Singh, Shoket Ali, Madhu Jain, Rakhee. Epidemic Model of HIV/AIDS Transmission Dynamics Based on Treatment. American Journal of Applied Mathematics. Vol. 4(5), pp.222-234. 2016
  15. RakheeGeetanjali SharmaKriti PriyaAnalysis of G–queue with unreliable server, OPSEARCH, (DOI) 10.1007/s12597-012-0117-y, vol. 50(3) pp. 334-345, 2013.
  16. Geetanjli Sharma, G.N. Purohit, and Rakhee, "Analysis of Multiple Queue Model in Cellular Networks with Sub Rating of Channels" King Abdulaziz University Journal, (Saudi Arabia), Vol. 23, No. 1, pp.85-128, 2012.
  17. Verma S., Rakhee, Kumari Savita and Artemi M.A.: Query Management for Efficient Data Access in Wireless Environment, International Journal of Computer Applications. Vol. 29 (1), pp. 26-33. Sep. 2011.
  18. Verma S., Rakhee, Kumari Savita and Artemi M.A., “Time Efficient Indexing Technique for Querying Location Dependent Data in Wireless Broadcast”, International Journal of Computer Applications, Volume 7–No.10, October 2010. Available Online at http://www.ijcaonline.org.Verma S., Rakhee and Kumari Savita, “Performance Evaluation of Unified Index Hub Using Integrated Signature”, International Journal of Advanced Research in Computer Science, Volume 1, No. 1, May-June 2010, PP:26-33. Available Online at http://www.ijarcs.info.
  19. Jain, G.C. Sharma, V.K. Saraswat andRakhee, Transient Analysis of a Telecommunication System Using State Dependent Markovian Queue Under Bi-Level Control Policy,King Abdulaziz University Journal, (Saudi Arabia), Vol. 20, No. 1, pp. 77-90,July 2009.
  20. Jain, M. and Rakhee, A Subrating channel assignment scheme for cellular radio network with direct retry, Operations Research and Computers, Volume 32, Issue 9, pp. 2407-2417, September 2005.
  21. Jain, M., Rakhee and Maheshwari, S., N-policy for a repairable system with spares and reneging, Applied Mathematical Modelling, Vol. 28, No. 6, pp. 513-531, 2004.
  22. Jain, M., Singh, M. and Rakhee, Bilevel control of degraded machining system with warm standbys, setup and vacation, Applied Mathematical Modelling, Vol. 28, No. 12, pp. 1015-1026, 2004.
  23. Jain, M., Sharma, G.C., Saraswat, V.K. and Rakhee, Dyanamic channel assignment scheme for cellular radio system with integrated traffic, Journal of Rajasthan Academy of Physical Sciences, Vol. 3, No. 3, pp. 197-203, Sep. 2004.
  24. Jain, M., Rakhee and Maheshwari, S., Reliability analysis of redundant repairable system with degraded failure, International Journal of Engineering, (IRAN), Vol. 17, No. 2, pp. 171-182, July 2004.
  25. Jain, M., Kriti Priya and Rakhee, Optimal Channel allocation in cellular systems, Journal of Information and Communication Technology, (Malaysia) Vol. 2, No. 2, pp. 41-64, Dec. 2003.
  26. Jain, M. and Rakhee, Priority based channel assignment schemes for PCS with integrated traffic, CSI Journal : Computer Science and Informatics, Vol. 33, No. 2, 2003, pp. 8-18. (Emerging Convergent Technologies and Systems (SECTAS-2002), Allied Publishers Ltd., New Delhi, (Eds. Prof. S.B. Rao) pp. 79-84.).
  27. Jain, M., Maheshwari, S. and Rakhee, Study of loading policies for k-r out of N: G subject to common cause failure, R & D Quality Quest, Vol. 4, No. 2, pp. 15-23, 2002.
  28. Jain, M. and Rakhee : Analysis of ordered dynamic channel assignment scheme with integrated traffic, International Journal of Information and Computing Science, Vol. 4, No. 2, pp. 21-31, December 2001.
  29. Jain, M. and Rakhee : Queueing analysis for PCS with integrated traffic and subrating channel assignment scheme, CSI Journal: Computer Science & Informatics, Vol. 31, No. 2, pp. 1-8, June 2001.

Paper Published in Edited Books /Proceedings of Conferences

  1. Apoorav Dhingra, Vijaypal Poonia, Rakhee Kulshrestha (2022). A Multi-Objective Mathematical Model for Socially Responsible Supply Chain Inventory Planning. In: Sharma, D.K., Jain, M. (eds) Data Analytics and Artificial Intelligence for Inventory and Supply Chain Management. Inventory Optimization. Springer, Singapore. pp 45–62. https://doi.org/10.1007/978-981-19-6337-7_3.
  2. Rakhee, Shruti (2020) Discrete-Time Analysis of Communication Networks with Second Optional Service and Negative User Arrivals. In: Bansal J., Gupta M., Sharma H., Agarwal B. (eds) Communication and Intelligent Systems. ICCIS 2019. Lecture Notes in Networks and Systems, vol 120. Springer, Singapore. https://doi.org/10.1007/978-981-15-3325-9_19.
  3. Rakhee Kulshrestha and Madhu Jain: “Prioritized Call Admission Control for Cellular Mobile Network, Proceedings of Multicon-W 2018, pp. 307-312.Seema Verma, Rakhee and Savita Kumari: "Channel Optimization for Wireless Data Broadcast", IJCA Proceedings on National Workshop-Cum-Conference on Recent Trends in Mathematics and Computing 2011 RTMC(1), 2012. Foundation of Computer Science, New York, USA.
  4. Verma S., Rakhee, Kumari Savita and Artemi M.A.: “Time efficient Extension of Exponential Index”, The Libyan Arab International Conference on Electrical and Electronic Engineering (LAICEEE – 2010), 2010, Tripoli, Libya, Volume 1 pp405-414.
  5. Seema Verma, Rakhee and Savita K. Sheoran: Two Level Signature Model for Multiple Broadcast Channel Using Unified Hub (UIH), Proceedings on 2nd International Conference on soft computing, ICSC-08, 2008, Alwar, (ed. A.K. Srivastava), Narosa publication, pp.422-431.
  6. Madhu Jain, Rakhee and Sandhya Maheshwari: Reliability Analysis of Redundant Repairable System with Degraded Failure, Operations Research, Information Technology and Industry, (eds M. Jain and G.C. Sharma), Janvadi, New Delhi, 2004, pp.215-230.
  7. M. Jain and Rakhee: Subrating Channel Assignment Scheme for Cellular Radio Network with Directed Retry, Operations Research, Information Technology and Industry, (eds M. Jain and G.C. Sharma), Janvadi, New Delhi, 2004, pp. 269-282.
  8. Jain, M. and Rakhee: On M/Hk/1 with balking and retrial attempts, Electronic Proceedings of XXXV Annual Convention of ORSI and an International Conference on Operations Research for Development, Chennai, 2002, CF 27.
  9. Jain, M., Rakhee and Kriti Priya: Optimal file Placement in Video on Demand (VoD) system, Electronic Proceedings of XXXV Annual Convention of ORSI and an International Conference on Operations Research for Development, Chennai, 2002, CF 29.
  10. Jain, M. and Rakhee: Finite capacity controllable Markovian system with single server and Batch service, Proc. of International Conference on Mathematical Modelling, 2001, pp 317-322.
  11. Jain, M. and Rakhee: Delay analysis of integrated mobile indoor wireless network, Proceedings of All Indian Seminar on Recent Trends in Computer Communication Networks, 2001, pp.5-11.
  12. Jain, M. and Rakhee: Analysis of Space Division Multiple Access (SDMA) Scheme for Mixed Traffic, Proceedings of XXXIV Annual Convention of ORSI and an International Conference on Operation Research and National Development, Kolkata, 2001, pp.128-130.
  13. Jain, M. and Rakhee: Channel Assignment Scheme for Integrated traffic in Cellular Network, Proc. of National Seminar-SASESC-2000, March 4-5, 2000, pp.496-502.

Conferences/Workshops

Participated in Conferences/Training Programs/Workshops
  1. National Conference on Advances Mathematical Sciences and their Applications, held at Hindu Girls College Sonepat, during 28-30, March, 2014, presented a paper entitled “Performance Analysis of Subrating Channel Assignment Scheme in Cellular Mobile Radio Network”.
  2. National Conference on Recent Trends and Developments in Operations Research, held at Birla Institute of Technology and Science, Pilani Campas, Pilani during 22-23 Feb. 2014, presented a paper entitled "Modelling and Analysis of Channel Allocation in multi-layer cellular networks".
  3. International Conference on Operations Research for Data Analytics and Decision Analysis, held at University of Kashmir, Srinagar during 21-23, October 2013, presented a paper entitled "An analysis of channel assignment scheme for cellular mobile Radio network".
  4. International Conference on Applied Analysis and Mathematical Modeling (ICAAMM 2013), organized by Yidiz Technical University, Istanbul, Turkey, held during 2-5 June 2013, presented a paper entitled "Performance Analysis of Cellular Mobile Radio System Based on Prioritized Channel Assignment".
  5. International conference on Frontiers of Statistics and its Applications, organized by Pondicherry University, Puducherry, held during 21-23 December 2012, presented a paper entitled "Evaluation of Blocking Probabilities for Multiple Queue Model in Microcellular Networks with Subrating".
  6. National conference on Industrial Mathematics and soft Computing-2012, organized by Department of Mathematics, School of Applied Sciences, KIIT University, Bhubaneswar during May 26-27, 2012, presented a paper entitled "Analysis of G–Queue with Unreliable Server".
  7. Training Program on “Optimization and its Application”, December 24-29, 2008, Sponsored by DST, held at Banasthali University, under Centre for Mathematical Sciences.
  8. National Conference on Mathematical Modelling, Optimization and Their Applications, held at Bharati Vidyapith, New Delhi, April 28-29, 2007, presented paper entitled “On Retrial Single Server Queue with Reneging and Finite Size Orbit”.
  9. International Conference on Operational Research as Competitive Edge, held at Heritage Institute of Technology, Kolkata, Jan. 5-7, 2007, presented paper entitled “Queueing Analysis of a Transient State Dependent Multi-Processor System with Balking and Reneging”.
  10. Pre-conference Workshop on Operational Research as Competitive Edge held at Department of Industrial Engineering, IIT Karagpur, during Jan. 3-4, 2007.
  11. Training Program on “Stochastic Process Modelling: Concepts, Theory and Applications”, sponsored by Department of Technology, Govt. of India, held at Banasthali Vidyapith, December 2-15, 2006.
  12. National Seminar on Recent Trends in Combinatorics and its Applications (NSRTCA-2006), sponsored by Department of Technology, Govt. of India, held at Banasthali Vidyapith, March 5-6, 2006.
  13. International Conference on Operations Research Applications in Infrastructure development and 2005 Annual convention of Operational Research Society of India (ICOAID-2005-ORSI), held at IISc. Bangalore during December 27-29, 2005, presented paper entitled “Channel Allocation in multi-layer cellular networks”.
  14. XXXVII Annual Convention of ORSI, held at Ahmedabad, during Jan. 8-11, 2005, presented paper on “Routing Strategies for Integrated Voice/Data Traffic in Cellular Mobile Radio System”.
  15. National conference on Information Technology, Operations Research and Computing, held at Agra during April 10-12, 2004, presented paper “Optimal N-control policy for markovian queue with integrated input”.
  16. Seminar on Roll of Information Technology in Rural Development held at Agra, during April 6-7, 2002, presented paper “Analysis of cellular system for non-prioritized, reserved channel and cutoff priority scheme”.
  17. Conference on Emerging Convergent Technologies and Systems (SECTAS-2002) held at Dayal Bagh, Agra, during March 1-2, 2002, presented paper “Priority based channel assignment schemes for PCS with integrated traffic”.
  18. Annual Conference of Indian Mathematical Society, held at Aligarh Muslim University, Aligarh, during Jan 27-29, 2002, presented paper on “Analysis of ordered dynamic channel assignment scheme with integrated traffic”.
  19. Shri ChhaDami Lal Jain Memorial Symposium on Fluid Mechanics and Allied Topics, held at C.L. Jain (P.G.) College Firozabad, during Jan. 14-15, 2002, presented paper on “Queueing analysis of PCS network with integrated traffic”.
  20. 89th session of Indian National Science Congress, held at Lucknow University, Lucknow, during Jan. 3-7, 2002.
  21. Symposium on Information and Optimization, held at Calcutta University, Kolkata, during Dec. 31, 2001-Jan. 1, 2002, presented a paper on “Analysis of ordered dynamic channel assignment scheme with integrated traffic”.
  22. XXXIV Annual Convention of ORSI and An International Conference on Operational Research and National Development, held at Kolkata, during Dec. 27-29, 2001, presented paper on “Analysis of space division multiple access (SDMA) scheme for mixed traffic”.
  23. All India Seminar on Recent Trends in Computer Communication Networks, IIT Roorkee, during Nov. 7-8, 2001, presented a paper on “Delay analysis of integrated mobile indoor wireless network”.
  24. National Seminar on Modern Applications of Computers in Engineering and Information Technology, held at Anand Engg. College, Agra, during 22-23, February, 2001
  25. International Conference on Mathematical Modelling, held at Roorkee during 29-31, January, 2001presented a paper entitled “Finite capacity controllable markovian system with single server and batch service”.
  26. Poster presentation in 88th session of Indian National Science Congress, held at Pusa Institute, New Delhi during Jan. 3-7, 2001 .
  27. International Conference on Quality, Reliability and Information Technology at the Turn of the Millennium, held at Delhi during 21-23 December, 2000presented a paper entitled “Optimal channel allocation by splitted rating scheme for integrated traffic in PCS network”.
  28. XXXIII ORSI Annual Convention and Conference on Operational Research in Agro Business, held at Ahmedabad during 14-16 December, 2000presented a paper entitled “Delay analysis of integrated mobile indoor wireless network with retrial attempts”.
  29. National Symposium on Stochastic Modelling and Operations Management, held at Kurukshetra during 19-21 Oct., 2000presented a paper entitled  “Subrating channel assignment scheme for cellular radio network with direct retry”.
  30. National Conference on Operations Research and Information Technology, held at Agra during 2-3 April, 2000presented a paper entitled  “Subrating channel assignment scheme for PCS with integrated traffic”.
  31. Silver Jubilee Symposium on MOIT-MDM and Fourth annual conference of Indian Society of Information Theory and Applications, held at Jhansi during 14-16 January, 2000presented a paper entitled as “Queueing analysis for PCS with integrated traffic and subrating channel assignment scheme”.
  32. XXXII ORSI Annual Convention and Conference on Operational Research in small and medium enterprises, held at Tirupati during 19-21 December 1999presented a paper entitled “Traffic analysis of ACD system with retrial attempts”.
  33. Workshop on Industrial Mathematics and Computing held at Department of Mathematics and Computer Science, Institute of Basic Science, Khandari, Agra, during 9-13 April 1999XXXI ORSI Annual Convention and International Conference on Operations Research and Industry held at Agra during 19-21 December 1998presented a paper entitled “On M/M(a,b)/1 queueing system with delayed vacations and balking”. 

Publications

Category
Published / Accepted
Under Submission/
Under Revision

International Journal Papers

90

2

International Conference Papers

94

National Conference Papers

3

-

 Total1872
 
 

 

 
 
LIST OF PUBLICATIONS

 

For updated list, please visit: https://scholar.google.com/citations?user=Cr8bD8EAAAAJ&hl=en

 

Book chapter:

B01. Kotkunde N., Deole A.D., Gupta A.K., Singh S.K., “Numerical Analysis of Warm Deep Drawing for Ti–6Al–4V Alloy”, Advances in Material Forming and Joining, Topics in Mining, Metallurgy and Materials Engineering, Springer, 2015, pp 109-139.

B02. G Mahalle, N Kotkunde, AK Gupta, SK Singh, “Forming and Fracture Limit Diagrams of Inconel 718 Alloy at Elevated Temperatures”, Metal Forming Processes, CRC Press, 2023, pp 151-167.

 

Journal Publications

 

2023

J90.     A Sharma, SSK Vijayaraghavan, AK Gupta, R Sujith (2023), “B4C‐Reinforced Al–Zn Foams Having Superior Energy Absorption Efficiency” Advanced Engineering Materials, Wiley Online Library, Vol. 25 (1), p. 2200810.

J89.     SP Akula, M Ojha, KL Rao, AK Gupta, (2023), “A Review on Superplastic Forming of Ti-6Al-4V and Other Titanium Alloys” Materials Today Communications, Elsevier, p. 105343 (published online).

2022

J88.     M Patil, V Singh, SP Regalla, AK Gupta, TC Bera, S Bade, K Srinivas (2022), “The effect of ultrasonic vibrations on residual stresses and material properties of steel tubes during the cold tube drawing process” Advances in Materials and Processing Technologies, Taylor & Francis, p. 1-21 (published online).

J87.     M Patil, V Singh, SP Regalla, AK Gupta, TC Bera, S Bade, K Srinivas (2022), “Producing high quality cold-drawn steel tubes using an optimal thickness of tin as a tribo-layer” International Journal of Advanced Manufacturing Technology, Springer, Vol. 121 (7), p. 4663-4675.

J86.     A Sharma, SK Srinivasan, VM Dixit, AK Gupta, R Sujith (2022), “Ballistic Performance of Functionally Graded Boron Carbide Reinforced Al – Zn – Mg - Cu Alloy” Journal of Materials Research and Technology, Elsevier, Vol. 18, p. 4042-4059.

J85.     M Patil, V Singh, AK Gupta, SP Regalla, TC Bera, B Simhachalam, K Srinivas (2022), “Tin Layer as a Solid Lubricant for Cold Tube Drawing Processes”, Int. J. of Precision Engineering and Manufacturing-Green Technology, Springer Nature, Vol. 9(2), p. 459-472.

J84.     A Sharma, B Tirumuruhan, GS Muthuvel, AK Gupta, R Sujith (2022), “Optimization of Process Parameters of Boron Carbide-Reinforced Al-Zn-Mg-Cu Matrix Composite Produced by Pressure-Assisted Sintering” Journal of Materials Engineering and Performance, Springer US, Vol. 31(1), p. 328-340.

2021

J83.     A Garudapalli, A Bhardwaj, K Oswal, D Mathur, AK Gupta (2021), “Microstructural, Mechanical, and Superelastic Behavior of Thermo-Mechanically Processed Nitinol Alloy” Shape Memory and Superelasticity, Springer US, Vol. 7(4), p. 503-514.

J82.     G Mahalle, N Kotkunde, AK Gupta, SK Singh (2021), “Efficacy of semi-empirical models for prediction of forming limit curve of IN718 alloy at elevated temperatures”, Advances in Materials and Processing Technologies, Taylor & Francis, Vol. 7(4), p. 617-629.

J81.     G Mahalle, N Kotkunde, AK Gupta, SK Singh (2021), “Comparative assessment of failure strain predictions using ductile damage criteria for warm stretch forming of IN718 alloy”, International Journal of Material Forming, Springer Paris, Vol. 14(5), p. 799-812.

J80.     G Mahalle, N Kotkunde, AK Gupta, SK Singh (2021), “An integrated experimental and finite element approach for wrinkling limit prediction of Inconel 718 alloy at elevated temperatures”, The Journal of Strain Analysis for Engineering Design, SAGE Publications, Pages 03093247211043098.

J79.     A Bhardwaj, M Ojha, A Garudapalli, AK Gupta (2021), “Microstructural, mechanical and strain hardening behaviour of NiTi alloy subjected to constrained groove pressing and ageing treatment”, Journal of Materials Processing Technology, Elsevier, Vol. 294, p.117132.

J78.     CK Sagar, A Priyadarshini, AK Gupta (2021), “Experimental Investigations on The Effect of Tungsten Content on the Machining Behaviour of Tungsten Heavy Alloys”, Defence Science Journal, Vol. 71(2), p. 162-170.

J77.     R Kulkarni, A Krishnan, A Bhardwaj, AK Gupta (2021), “Microstructural behaviour and electrochemical characterization of Nitinol alloy subjected to constrained groove pressing and heat treatment”, Materials Today Communications, Elsevier, Vol. 26, p. 102143.

J76.     G Mahalle, N Kotkunde, AK Gupta, SK Singh (2021), “An improved M–K model coupled with different ductile criteria for fracture limit predictions of Inconel 718 alloy”, Journal of Materials Research and Technology, Elsevier, Vol. 11, p. 1162-1174.

J75.     A Bhardwaj, V Mudaliar, N Gohil, AK Gupta, SSS Kumar (2021), “Evolution of microstructure and mechanical properties of Ti6Al4V alloy by multiple passes of constrained groove pressing at elevated temperature”, Journal of Materials Processing Technology, Elsevier, Vol. 288, p.116891.

J74.     CK Sagar, A Priyadarshini, AK Gupta, T Kumar, S Saxena (2021), “An alternate approach to SHPB tests to compute Johnson-Cook material model constants for 97 WHA at high strain rates and elevated temperatures using machining tests”, Journal of Manufacturing Science and Engineering, ASME, Vol. 143 (2).

J73.     A Bhardwaj, N Gohil, AK Gupta, SSS Kumar (2021), “An experimental investigation on the influence of elevated-temperature constrained groove pressing on the microstructure, mechanical properties and hardening behaviour of Ti6Al4V alloy”, Materials Science and Engineering: A, Elsevier, Vol. 802, p. 140651.

J72.     CK Sagar, A Priyadarshini, AK Gupta, D Mathur (2021), “Experimental investigation of tool wear characteristics and analytical prediction of tool life using a modified tool wear rate model while machining 90 tungsten heavy alloys”, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, SAGE Publications, Vol. 235(1-2), p.242-254.

2020

J71.     G Mahalle, A Morchhale, N Kotkunde, AK Gupta, SK Singh, YC Lin (2020), “Forming and fracture limits of IN718 alloy at elevated temperatures: Experimental and theoretical investigation”, Journal of Manufacturing Processes, Elsevier, Vol. 56, p.482-499.

J70.     G Mahalle, N Kotkunde, AK Gupta, SK Singh (2020), “Efficacy of semi-empirical models for prediction of forming limit curve of IN718 alloy at elevated temperatures”, Advances in Materials and Processing Technologies, Taylor & Francis, p.1-13

J69.     AK Sannidhi, AK Gupta, G Varghese, K Toshniwal, V Sharma (2020), “Analytical and finite element modelling of hydraulic bulge test on extra deep drawing steel with fractography study”, Advances in Materials and Processing Technologies, Taylor & Francis, p.1-17

J68.     G Mahalle, N Kotkunde, AK Gupta, SK Singh (2020), “Prediction of flow stress behaviour by materials modelling technique for Inconel 718 alloy at elevated temperature” Advances in Materials and Processing Technologies, Taylor & Francis, Vol. 6 (2), p.376-383

J67.     MA Wahed, AK Gupta, VSR Gadi, SK Singh, N Kotkunde (2020), “Parameter optimisation in V-bending process at elevated temperatures to minimise spring back in Ti-6Al-4V alloy” Advances in Materials and Processing Technologies, Taylor & Francis, Vol. 6 (2), p. 350-364

2019

J66.     CK Sagar, T Kumar, A Priyadarshini, AK Gupta (2019), “Prediction and optimization of machining forces using oxley's predictive theory and RSM approach during machining of WHAs”, Defence Technology, Vol. 15 (6), p.923-935

J65.     MA Wahed, AK Gupta, V Sharma, K Mahesh, SK Singh, N Kotkunde (2019), “Material characterization, constitutive modelling, and processing map for superplastic deformation region in Ti-6Al-4V alloy”, The International Journal of Advanced Manufacturing Technology, Springer London, Vol. 104 (9-12), p.3419-3438

J64.     A Bhardwaj, AK Gupta, SK Padisala, K Poluri (2019), “Characterization of mechanical and microstructural properties of constrained groove pressed nitinol shape memory alloy for biomedical applications”, Materials Science and Engineering: C, Vol. 102, p.730-742

J63.     G Mahalle, N Kotkunde, AK Gupta, R Sujith, SK Singh, YC Lin (2019), “Microstructure characteristics and comparative analysis of constitutive models for flow stress prediction of Inconel 718 alloy”, Journal of Materials Engineering and Performance, Vol. 28 (6), p.3320-3331

J62.     G Mahalle, O Salunke, N Kotkunde, AK Gupta, SK Singh (2019), “Neural network modeling for anisotropic mechanical properties and work hardening behavior of Inconel 718 alloy at elevated temperatures”, Journal of Materials Research and Technology, Vol. 8 (2), p.2130-2140

J61.     Bhardwaj A., Gupta A.K., Padisala S.K., Poluri K. (2019), “Characterization of mechanical and microstructural properties of constrained groove pressed nitinol shape memory alloy for biomedical applications”, Materials Science & Engineering C, Vol. 102, p. 730–742

J60.     Satya Suresh V.V.N., Regalla S.P., Gupta A.K. (2019), “Minimization of weld line movement in heat-assisted forming of tailor welded blanks”, Journal of Mechanical Engineering Science (iMechE Part C), SAGE Publications, Vol. 233(11), p. 3760–3768

2018

J59.     Sharma V., Namburu S.A.S., Lalwani P., Sagar C.K., Gupta A.K. (2018), “Constitutive modelling and processing map analysis of tungsten heavy alloy (92.5 W-5.25Ni-2.25Fe) at elevated temperatures”, International Journal of Refractory Metals and Hard Materials, Vol. 76, p.168-179

J58.     Satya Suresh V.V.N., Regalla S.P., Gupta A.K. (2018), “Optimum parameters to minimize weld line movement in the warm forming of tailor-welded blanks”, Journal of the Brazilian Society of Mechanical Sciences and Engineering, Vol. 40 (4)

2017

J57.     Satya Suresh, V.V.N., Regalla, S.P. & Gupta, A.K. (2017), “Influence of geometric parameters on weld line movement in the selective heating of tailor welded blanks”, Advances in Materials and Processing Technologies, Taylor & Francis, Vol. 3 (3), p.385-392

J56.     Athale M., Gupta A.K., Singh S.K., Vaidyanathan A. (2017), “Analytical and finite element simulation studies on earing profile of Ti-6Al-4V deep drawn cups at elevated temperatures”, International Journal of Material Forming, Springer-Verlag France, Vol. 11 (4), p.479-490

2016

J55.     Suresh V.V.N.S., Regalla S.P., Gupta A.K. (2016), “Combined effect of thickness ratio and selective heating on weld line movement in stamped tailor-welded blanks”, Materials and Manufacturing Processes, Taylor and Francis Inc., Vol. 32 (12), p.1363-1367

J54.     Prasad K.S., Gupta A.K., Singh Y., Singh S.K. (2016), “A Modified Mechanical Threshold Stress Constitutive Model for Austenitic Stainless Steels”, Journal of Materials Engineering and Performance, Springer New York LLC, Vol. 25 (12), p.5411-5423

J53.     Gupta A.K., Maddukuri T.S., Singh S.K. (2016), “Constrained groove pressing for sheet metal processing”, Progress in Materials Science, Elsevier Ltd, Vol. 84 , p.403-462

J52.     Hussaini S.M., Krishna G., Gupta A.K., Singh S.K. (2016), “Development of experimental and theoretical forming limit diagrams for warm forming of austenitic stainless steel 316”, Journal of Manufacturing Processes, Elsevier Ltd, Vol. 18 , p.151-158

J51.     Kotkunde N., Gupta A.K., Singh S.K. (2016), “Formability study of Ti-6Al-4V alloy under warm conditions”, Advances in Materials and Processing Technologies, Taylor & Francis, Vol. 1 (1-2), p.210-222

2015

J50.     Kotkunde N., Krishna G., Shenoy S.K., Gupta A.K., Singh S.K. (2015), “Experimental and theoretical investigation of forming limit diagram for Ti-6Al-4 V alloy at warm condition”, International Journal of Material Forming, Springer-Verlag France, Vol. 10, p. 255-266

J49.     Desu R.K., Singh S.K., Gupta A.K. (2015), “Comparative study of warm and hydromechanical deep drawing for low-carbon steel”, The International Journal of Advanced Manufacturing Technology, Springer, Vol. 85 (1-4), p.661-672

J48.     Kotkunde N., Srinivasan S., Krishna G., Gupta A.K., Singh S.K. (2015), “Influence of material models on theoretical forming limit diagram prediction for Ti–6Al–4V alloy under warm condition”, Transactions of Nonferrous Metals Society of China (English Edition), Nonferrous Metals Society of China, Vol. 26 (3), p.736-746

J47.     Kotkunde N., Deole A.D., Gupta A.K., Singh S.K. (2015), “Numerical Analysis of Warm Deep Drawing for Ti–6Al–4V Alloy”, Advances in Material Forming and Joining, Springer, p.109-139

J46.     Desu R.K., Nitin Krishnamurthy H., Balu A., Gupta A.K., Singh S.K. (2015), “Mechanical properties of Austenitic Stainless Steel 304L and 316L at elevated temperatures”, Journal of Materials Research and Technology, Elsevier Editora Ltda, Vol. 5 (1), p.13-20

J45.     Kurra S., Hifzur Rahman N., Regalla S.P., Gupta A.K. (2015), “Modeling and optimization of surface roughness in single point incremental forming process”, Journal of Materials Research and Technology, Elsevier Editora Ltda, Vol. 4 (3), p.304-313

2014

J44.     Lade J., Banoth B.N. Gupta A.K., Singh S.K. (2014), “Metallurgical Studies of Austenitic Stainless Steel 304 under Warm Deep Drawing”, Journal of Iron and Steel Research, International, Elsevier, Vol. 21 (12), p.1147-1151

J43.     Kurra S., Nasih H.R., Regalla S., Gupta A.K. (2014), “Parametric study and multi-objective optimization in single-point incremental forming of extra deep drawing steel sheets”, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, SAGE Publications Ltd, Vol. 230 (5), p.825-837

J42.     Uppada S.R., Balu A., Gupta A.K., Dutta J.R. (2014), “Hybrid neural network based optimization of process parameters and application of taguchi method for lipase production from co-culture of Lactobacillus brevisand Lactobacillus plantarum”, International Journal of PharmTech Research, Sphinx Knowledge House, Vol. 6 (7), p.2074-2082

J41.     Gupta A.K., Guntuku S.C., Desu R.K., Balu A. (2014), “Optimisation of turning parameters by integrating genetic algorithm with support vector regression and artificial neural networks”, International Journal of Advanced Manufacturing Technology, Springer-Verlag London Ltd, Vol. 77 (42739), p.331-339

J40.     Uppada S.R., Balu A., Gupta A.K., Dutta J.R. (2014), “Modeling Lipase Production From Co-cultures of Lactic Acid Bacteria Using Neural Networks and Support Vector Machine with Genetic Algorithm Optimization”, International Journal of Emerging Technologies in Computational and Applied Sciences, Vol. 9 (1), p.38-43

J39.     Gupta A.K., Krishnamurthy H.N., Puranik P., Singh S.K., Balu A. (2014), “An exponential strain dependent Rusinek-Klepaczko model for flow stress prediction in austenitic stainless steel 304 at elevated temperatures”, Journal of Materials Research and Technology, Elsevier Editora Ltda, Vol. 3, p. 370-377

J38.     Kotkunde, N., Balu, A., Gupta, A.K., and Singh, S.K. (2014), “Flow stress prediction of Ti-6Al-4V alloy at elevated temperature using artificial neural network”, Journal of Applied Mechanics and Materials, Trans Tech Publications, Vol. 612 , p.83-88

J37.     Kotkunde, N., Deole A.D., and Gupta, A.K. (2014), “Prediction of Forming Limit Diagram for Ti-6Al-4V Alloy Using Artificial Neural Network”, Procedia Materials Science, Elsevier, Vol. 6 , p.341-346

J36.     Prasad, K.S. and Gupta, A.K. (2014), “A Constitutive Description to Predict High-temperature Flow Stress in Austenitic Stainless Steel 316”, Procedia Materials Science, Elsevier, Vol. 6 , p.347-353

J35.     Hussaini, S.M., Gupta, A.K. and Singh, S.K. (2014), “Investigation of Material Model for Simulations of Deep Drawing in Dynamic Strain Aging Region”, Procedia Materials Science, Elsevier, Vol. 6 , p.1157-1160

J34.     Raghuram K.D., Sharath Chandra, G., Balu, A. and Gupta, A.K. (2014), “Support Vector Regression based Flow Stress Prediction in Austenitic Stainless Steel 304”, Procedia Materials Science, Elsevier, Vol. 6 , p.368-375

J33.     Kotkunde N., Deole A.D., Gupta A.K., Singh S.K. (2014), “Experimental and numerical investigation of anisotropic yield criteria for warm deep drawing of Ti-6Al-4V alloy”, Materials and Design, Elsevier Ltd, Vol. 63 , p.336-344

J32.     Kotkunde, N., Deole A.D., Gupta, A.K., and Singh, S.K. (2014), “Analysis of Thickness Strain Prediction in Warm Deep Drawing of Ti-6Al-4V”, Journal of Applied Mechanics and Materials, Trans Tech Publications, Vol. 980 , p.52-56

J31.     Kotkunde N., Deole A.D., Gupta A.K., Singh S.K., Aditya B. (2014), “Failure and formability studies in warm deep drawing of Ti-6Al-4V alloy”, Materials and Design, Elsevier Ltd, Vol. 60 , p.540-547

J30.     Garg A., Tai K., Gupta A.K. (2014), “A modified multi-gene genetic programming approach for modelling true stress of dynamic strain aging regime of austenitic stainless steel 304”, Meccanica, Kluwer Academic Publishers, Vol. 49 (5), p.1193-1209

2013

J29.     Singh S.K., Kumar V., Prudvi Reddy P., Gupta A.K. (2013), “Finite element simulation of ironing process under warm conditions”, Journal of Materials Research and Technology, Elsevier Editora Ltda, Vol. 3 (1), p.71-78

J28.     Hussaini S.M., Singh S.K., Gupta A.K. (2013), “Experimental and numerical investigation of formability for austenitic stainless steel 316 at elevated temperatures”, Journal of Materials Research and Technology, Elsevier Editora Ltda, Vol. 3 (1), p. 17-24

J27.     Singh, S.K. & Gupta, A.K. (2013), “Comparison of ironing in warm and hydro-mechanical deep drawing of low carbon steel”, Advances in Materials and Processing Technologies XV, Scientific Net, Vol. 0 , p.203-210

J26.     Kotkunde N., Deole A.D., Gupta A.K., Singh S.K. (2013), “Comparative study of constitutive modeling for Ti-6Al-4V alloy at low strain rates and elevated temperatures”, Materials and Design, Elsevier Ltd, Vol. 55 , p.999-1005

J25.     Hussaini S.M., Singh S.K., Gupta A.K. (2013), “Formability of austenitic stainless steel 316 sheet in dynamic strain aging regime”, Acta Metallurgica Slovaca, 0, Vol. 20 (1), p.71-81

J24.     Kotkunde N., Krishnamurthy H.N., Puranik P., Gupta A.K., Singh S.K. (2013), “Microstructure study and constitutive modeling of Ti-6Al-4V alloy at elevated temperatures”, Materials and Design, Elsevier Ltd, Vol. 54 , p.96-103

J23.     Hussaini, S.M., Singh, S.K. & Gupta, A.K. (2013), “Experimental investigation of dynamic strain aging regime in Austenitic Stainless Steel 316”, International Journal of Engineering Research & Technology, ESRSA Publications Pvt Ltd, Vol. 2 (8), p.1691-1694

J22.     Hussaini S.M., Singh S.K., Gupta A.K. (2013), “Formability and fracture studies of austenitic stainless steel 316 at different temperatures”, Journal of King Saud University - Engineering Sciences, King Saud University, Vol. 26 (2), p.184-190

J20.     Jayahari, L., Sasidhar, P.V., Prudvi Reddy, P., BaluNaik, P., Gupta, A.K. and Singh, S.K. (2013), “Formability studies of ASS 304 and evaluation of friction for Al in deep drawing setup at elevated temperatures using LS-DYNA”, Journal of King Saud University - Engineering Sciences, Elsevier, Vol. 26 , p.21-31

J19.     Gupta A.K., Krishnamurthy H.N., Singh Y., Prasad K.M., Singh S.K. (2013), “Development of constitutive models for dynamic strain aging regime in Austenitic stainless steel 304”, Materials and Design, Elsevier, Vol. 45, p.616-627

2012

J18.     Gupta A.K., Anirudh V.K., Singh S.K. (2012), “Constitutive models to predict flow stress in Austenitic Stainless Steel 316 at elevated temperatures”, Materials and Design, Elsevier, Vol. 43 , p.410-418

J17.     Gupta A.K., Singh S.K., Reddy S., Hariharan G. (2012), “Prediction of flow stress in dynamic strain aging regime of austenitic stainless steel 316 using artificial neural network”, Materials and Design, Elsevier, Vol. 35, p.589-595

J16.     Kotkunde, N., Krishnamurthy, H.N., Gupta, A.K. & Singh, S.K. (2012), “Development of modified Arrhenius model for Ti-6Al-4V alloy to predict the flow stress”, International Journal of Advanced Materials Manufacturing & Characterization, Publishing India Group, Vol. 3 (1), p.83-88

J15.     Uppada S.R., Gupta A.K., Dutta J.R. (2012), “Statistical optimization of culture parameters for lipase production from Lactococcus lactis and its application in detergent industry”, International Journal of ChemTech Research, 0, Vol. 4 (4), p.1509-1517

2011

J14.     Gupta A.K., Sivakumar A.I., Lendermann P. (2011), “Cycle time simulation study for cluster tool operation in IC fabrication”, International Journal of Manufacturing Technology and Management, Inderscience Publishers, Vol. 23(3-4), p.179-192

2010

J13.     Singh, S.K., Mahesh, K and Gupta, A.K. (2010), “Prediction of mechanical properties of extra deep drawn steel in blue brittle region using Artificial Neural Network”, Materials & Design, Elsevier, Vol. 31 (5), p.1980-2015

J12.     Gupta A.K. (2010), “Predictive modelling of turning operations using response surface methodology, artificial neural networks and support vector regression”, International Journal of Production Research, Taylor & Francis, Vol. 48 (3), p.763-778

J11.     Singh, S.K., Gupta, A.K. and Mahesh K. (2010), “A study on the extent of ironing of EDD steel at elevated temperature”, CIRP Journal of Manufacturing Science and Technology, Elsevier, Vol. 3 (1), p.73-79

J10.     Singh S.K., Gupta A.K. (2010), “Application of support vector regression in predicting thickness strains in hydro-mechanical deep drawing and comparison with ANN and FEM”, CIRP Journal of Manufacturing Science and Technology, 0, Vol. 3 (1), p.66-72

2009

J09.     Gupta A.K., Ganesan, V.K. and Sivakumar, A.I. (2009), “Cycle time variance minimization in dynamic scheduling of single machine systems”, The International Journal of Advanced Manufacturing Technology, Springer London, Vol. 42(5), p.544-552.

2007

J08.     Gupta, A.K., Sivakumar, A.I. (2007), “Controlling delivery performance in semiconductor manufacturing using Look Ahead Batching”, International Journal of Production Research, Taylor & Francis, Vol. 45 (3), p.591-613.

J07.     Gan, B.P., Liow, L.F., Gupta, A.K., Lendermann, P., Turner, S.J. and Wang, X. (2007), “Analysis of a borderless fab using interoperating AutoSched AP models”, International Journal of Production Research, Taylor & Francis, Vol. 45 (3), p.675-697

2006

J06.     Gupta, A.K., Sivakumar, A.I. (2006), “Optimization of due date objectives in scheduling semiconductor batch manufacturing”, International Journal of Machine Tools and Manufacture, Elsevier Sciece, Vol. 46 (12-13), p.1671-1679

J05.     Sivakumar, A.I., Gupta, A.K. (2006), “On-line multiobjective Pareto optimal dynamic scheduling of semiconductor back-end using conjunctive simulated scheduling”, IEEE Transactions on Electronics Packaging Manufacturing, IEEE, Vol. 29 (2), p.99-109

J04.     Gupta, A.K. and Sivakumar, A.I. (2006), “Job shop scheduling techniques in semiconductor manufacturing”, International Journal of Advanced Manufacturing Technology, Springer-Verlag London Ltd, Vol. 27 (11-12), p.1163-1169

2005

J03.     Gupta, A.K. and Sivakumar, A.I. (2004), “Conjunctive simulated scheduling”, International Journal of Advanced Manufacturing Technology, Springer-Verlag London Ltd, Vol. 26 (11-12), p.1409-1413

J02.     Gupta, A.K. and Sivakumar, A.I. (2004), “Single machine scheduling with multiple objectives in semiconductor manufacturing”, International Journal of Advanced Manufacturing Technology, Springer-Verlag London Ltd, Vol. 26 (9-10), p.950-958

J01.     Gupta, A.K. and Sivakumar, A.I. (2004), “Multi-objective scheduling of two-job families on a single machine”, OMEGA: The International Journal of Management Science, Elsevier Science, Vol. 33 (5), p.399-405

 

Publications in International Conferences:

 

2022

IC94.  KL Rao, AK Gupta, D Mathur, A Bhardwaj, (2022), “Experimental Investigation on Severe Plastic Deformation of AA7075 Alloy at Elevated Temperature” ASME International Mechanical Engineering Congress and Exposition

IC93.  A Bhardwaj, D Mathur, K Oswal, AK Gupta, (2022), “Microstructure Evolution and R-Phase Transformation in NiTi Shape Memory Alloy Processed by Constrained Groove Pressing and Ageing Treatment” ASME International Mechanical Engineering Congress and Exposition

IC92.  G Mahalle, P Takalkar, N Kotkunde, AK Gupta, SK Singh, (2022), “Strain and Stress-Based Forming Limit Diagrams for Inconel 718 Alloy” NUMISHEET 2022, Springer, pages 549-556.

2021

IC91.  A Sharma, AS Pratyush, AK Gupta, R Sujith, (2021), “Effect of Heat Treatment on Microstructure and Hardness of Graphene Nanoplatelets Reinforced Al-Zn-Mg-Cu Alloy Composite” ASME International Mechanical Engineering Congress and Exposition

IC90.  A Bhardwaj, N Gohil, A Sharma, KL Rao, AK Gupta, SS Satheesh Kumar (2021), “EBSD Investigation of Ti6Al4V Alloy Processed by Constrained Groove Pressing and Heat Treatment” ASME International Mechanical Engineering Congress and Exposition

IC89.  G Mahalle, N Kotkunde, AK Gupta, SK Singh, CP Nikhare (2021), “Prediction of Hot Deformation Behaviors Under Multiaxial Loading Using Gurson-Tvergaard-Needleman Damage Model for Inconel 718 Alloy Thin Sheet”, ASME International Mechanical Engineering Congress and Exposition

2020

IC88.  G Mahalle, O Salunke, N Kotkunde, AK Gupta, SK Singh, “Study of Khan-Huang-Liang (KHL) Anisotropic Deformation Model for Deep Drawing Behaviour of Inconel 718 Alloy”, IOP Conference Series: Materials Science and Engineering 967 (1), 012054.

IC87.  P Mahesh, SP Regalla, AK Gupta, TC Bera, B Simhachalam, K Srinivasa (2020), “Parametric optimization of the generation of the porous layer for lubrication in tube drawing process”, Materials Today: Proceedings

IC86.  CK Sagar, A Priyadarshini, AK Gupta (2020), “Effect of Johnson–Cook Material Model Constants on Predicted Chip Morphology and Forces in FE Simulations of Machining Operation for 93% WHA Alloy’, Advances in Simulation, Product Design and Development, p.227-239

2019

IC85.  G Mahalle, O Salunke, N Kotkunde, AK Gupta, SK Singh (2019), “Anisotropic Yielding Behaviour of Inconel 718 Alloy at Elevated Temperatures”, ASME International Mechanical Engineering Congress and Exposition

IC84.  A Sharma, A Priyadarshini, R Sujith, MVS Subrahmanyam, PA Thomas, AK Gupta (2019), “Effect of Graphene Nanoplatelets Incorporation on Microstructural and Tribological Properties of Aluminium Metal Matrix Composites” ASME International Mechanical Engineering Congress and Exposition

IC83.  C Kiran Sagar, A Priyadarshini, AK Gupta (2019), “Optimization of Machining Parameters During Turning of Tungsten Heavy Alloys Using Taguchi Analysis’ ASME International Mechanical Engineering Congress and Exposition

IC82.  M Ojha, PK Penumakala, GV Marrivada, PK Chaganti, AK Gupta (2019), “Processing Of Glass Fiber Pultruded Composites Using Graphene Nanoplatelets Modified Epoxy Matrix” Materials Today: Proceedings, Vol. 18, p.3298-3304

IC81.  MA Wahed, VSR Gadi, AK Gupta, K Supradeepan, SK Singh (2019), “Finite element analysis of spring back in Ti-6Al-4V alloy”, Materials Today: Proceedings, Vol. 18, p.2693-2699

IC80.  G Mahalle, N Kotkunde, AK Gupta, SK Singh (2019), “Cowper-Symonds Strain Hardening Model for Flow Behaviour Of Inconel 718 Alloy”, Materials Today: Proceedings, Vol. 18, p.2796-2801

IC79.  A Sharma, B Vasudevan, R Sujith, N Kotkunde, K Suresh, AK Gupta (2019), “Effect of Graphene Nanoplatelets on the Mechanical Properties of Aluminium Metal Matrix Composite”, Materials Today: Proceedings, Vol. 18, p.2461-2467

IC78.  G Mahalle, N Kotkunde, AK Gupta, SK Singh, (2019) “Analysis of Hot Workability of Inconel Alloys Using Processing Maps”, Advances in Computational Methods in Manufacturing, p.109-118

2018

IC77.  Chithajalu K.S., Priyadarshini A., Gupta A.K., Shukla S.K., “Determination of Johnson Cook Material Model Constants and Their Influence on Machining Simulations of Tungsten Heavy Alloy”, ASME 2018 International Mechanical Engineering Congress and Exposition, American Society of Mechanical Engineers.

IC76.  Wahed M.A., Gupta A.K., Kotkunde N., Singh S.K., “Development of Processing Map for Superplastic Deformation of Ti-6Al-4V Alloy”, ASME 2018 International Mechanical Engineering Congress and Exposition, American Society of Mechanical Engineers.

IC75.  Padisala  S.K., Bhardwaj A., Poluri K., Gupta A.K., “Effect of Constrained Groove Pressing on Mechanical Properties of Nitinol Alloy”, ASME 2018 International Mechanical Engineering Congress and Exposition, American Society of Mechanical Engineers.

IC74.  Mahalle G., Kotkunde N., Shah R., Gupta A.K., Singh S.K. (2018), “Analysis of Flow Stress Behaviour of Inconel Alloys at Elevated Temperatures Using Constitutive Model”, Journal of Physics: Conference Series, Vol 1063(1)

IC73.  Wahed M.A., Gupta A.K., Singh S.K., Kotkunde N., “Effect of anisotropy on mechanical properties of Ti-6Al-4V in superplastic region”, IOP Conference Series: Materials Science and Engineering, Vol 346(1)

IC72.  Kotkunde N., Krishnamurthy H.N., Gupta A.K., Singh S.K., “Study of Hot Deformation Behavior Using Phenomenological Based Constitutive Model for Austenitic Stainless Steel 316”, ICMPC 2017, Materials Today: Proceedings, Vol 5(2), p. 4870-4877

2017

IC71.  Kotkunde N., Balu A., Gupta A.K., Singh S.K., “Development of Predictive Models for Formability Study of Ti-6Al-4V alloy at Elevated Temperatures”, 5th International Conference of Materials Processing and Characterization (ICMPC 2016), Materials Today: Proceedings, Vol 4(2), p. 937-945

IC70.  Kotkunde N., Gupta A.K., Paresi P.R., Singh S.K., “Experimental and Finite Element Studies of Stretch Forming Process for Ti-6Al-4V Alloy at Elevated Temperature”, 6th International Conference of Materials Processing and Characterization (ICMPC 2016), Materials Today: Proceedings, Vol 4(4), p. 5266-5273

IC69.  Limbadri K., Krishnamurthy H.N., Maruthi Ram A., Saibaba N., Kutumba Rao V.V., Murthy J.N., Gupta A.K., Singh S.K., “Development of Johnson Cook Model for Zircaloy-4 with Low Oxygen Content”, 5th International Conference of Materials Processing and Characterization (ICMPC 2016) , Materials Today: Proceedings, Vol 4(2), p. 966-974

IC68.  Pratoori R., Maddukuri T.S., Sannidhi A.K., Singh Y.P., Gundepudi B., Gupta A.K. “Tensile Testing of Ultra-Fine Grained Extra Deep Drawing Steel Sheets”, 5th International Conference of Materials Processing and Characterization (ICMPC 2016), Materials Today: Proceedings, Vol 4(2), p. 590-595

IC67.  Singh S.K., Pratoori R., Paresi P.R., Kotkunde N., Gupta A.K., “Experimental and Finite Element Studies of Redrawing for ASS 316 at Elevated Temperatures”, 6th International Conference of Materials Processing and Characterization (ICMPC 2016), Materials Today: Proceedings, Vol 4(4), p. 5274-5281

IC66.  Toshniwal K., Pareddy S., Kotkunde N., Gupta A.K. “Numerical Investigation on Stress based Forming Limit Diagram for Ti-6Al-4V Alloy”, ICAAMM-2016, Materials Today: Proceedings, Vol 4(8), p. 8096-8103

2016:

IC65.  Gupta A.K., Deole A., Kotkunde N., Singh S.K., Jella G. “Analysis of earing behaviour in deep drawing of ASS 304 at elevated temperature”, Journal of Physics: Conference Series, Vol 743(3)

IC64.  Nitin Kotkunde, Aditya Balu, Amit Kumar Gupta, Swadesh Kumar Sing, “Development of Predictive Models for Formability Study of Ti-6Al-4V alloy at Elevated Temperatures”, 5th International Conference of Materials Processing and Characterization (ICMPC), GRIET-Hyderabad, March 2016.

IC63.  Chadaram Srinivasu, Swadesh Kumar Singh, Gangadhar Jella, Lade Jayahari, Nitin Kotkunde and Amit Kumar Gupta “Study of Limiting Dome Height and Temperature Distribution in Warm Forming of ASS304 Using Finite Element Analysis”, 5th International Conference of Materials Processing and Characterization, (ICMPC), GRIET-Hyderabad, March 2016.     

IC62.  Kotkunde, N., Krishna, G., Gupta, A.K. and Singh, S.K., “Investigations of Marciniak Kuczynski (M-K) theoretical model for forming limit curve prediction of Ti6Al4V alloy”, Proceedings of ISET2016 International Conference on Energy Systems and Developments (ICESD-2016), February 19-20, 2016, Pune, Maharashtra, India

IC61. Satya Suresh V.V.N, Srinivas Prakash Regalla, Amit Kumar Gupta, Padmanabham G (2015) “Weld line shift in the case of Tailor welded blanks subjected to differential strengths with respect to TIG and Laser welding”, 4th International Conference on Materials Processing and Characterization,  Materials Today Proceedings, 2, pp 3501-3510 (Elsevier)

2015:

IC60. Hussaini S.M., Gupta A.K., Singh S.K. (2015), “Formability Studies of ASS 316 Under Different Forming Conditions”, Materials Today: Proceedings, Vol. 2 (4-5), p.1987-1995

IC59. Jayahari L, Balunaik B, Gupta A.K., Singh S.K. (2015), “Finite Element Simulation Studies of AISI 304 for Deep Drawing at Various Temperatures”, Materials Today: Proceedings, Vol. 2 (4-5), p.1978-1986

IC58. Gangadhar J, Reddy KSK, Goud RR, Varma P, Prasad KE, Varghese G, Gupta A.K., Singh S.K. (2015), “Finite Element Simulation of Direct Redrawing Process of EDD Steel at Elevated Temperatures”, Materials Today: Proceedings, Vol. 2 (4-5), p.1968-1977

IC57. Srinivasu C,  Vishnu,  Limbadri, Prasad KE, Goud RR, Varghese G, Gupta A.K., Singh S.K. (2015), “Finite Element Simulation of Stretching Operation of EDD Steel at Different Temperatures”, Materials Today: Proceedings, Vol. 2 (4–5), p.1959-1967

IC56. Kanumuri L,Srishuka M, Gupta A.K., Singh S.K. (2015), “Application of Support Vector Regression on Mechanical Properties of Austenitic Stainless Steel 304 at Elevated Temperatures”, Materials Today: Proceedings, Vol. 2 (4-5), p.1479-1486

IC55. Kotkunde, N., Madhava P.T., Abhijeet A. and Gupta, A.K., (2015), “Experimental and numerical study of formability for EDD steel”, 4th  International Conference on Materials Processing and Characterization (ICMPC 2015), Mar 14-15, 2014.

IC54. Kotkunde, N. and Gupta, A.K., (2015), “Analysis of Forming Limit Diagram for Ti-6Al-4V Alloy”, 4th  International Conference on Materials Processing and Characterization (ICMPC 2015), Mar 14-15, 2014.

IC53. Satya Suresh V.V.N., Regalla S.P., Gupta, A.K. and Padmanabhan, G., (2015), “Weld line shift in the case of Tailor welded blanks subjected to differential strengths with respect to TIG and Laser welding”, 4th  International Conference on Materials Processing and Characterization (ICMPC 2015), Mar 14-15, 2014.

2014:

IC52. Kotkunde, N., Rane S, Gupta, A.K., and Singh, S.K  (2014), “Analysis of Warm Deep Drawing For Ti-6Al-4V Alloy”, 5th International & 26th All India Manufacturing Technology, Design and Research Conference (AIMTDR 2014), IIT Guwahati,  Dec 12-14, 2014.

IC51. Chirag I Sancheti., Aditya, B. and Gupta, A.K. (2014), “Improvement of production by assembly line simulations using FlexSim”, International Conference on Advance Design and Manufacturing (ICADM 2014), Dec 05-07, 2014.

IC50. Eswar P..K, Raman G. R., Singh, S.K. and Gupta, A.K., (2014) " Some Investigations of Stretching operation of EDD Steel at elevated Temperatures using FEM", International conference on Computer Science and Information Systems (ICSIS’2014), Dubai, UAE, Oct 17-18, 2014

IC49.  Sajun P. K. and Gupta, A.K.(2014), “A Constitutive Description to Predict High-temperature Flow Stress in Austenitic Stainless Steel 316”,3rd International Conference on Materials Processing and Characterization (ICMPC 2014), Mar 08-09, 2014.

IC48. Hussaini, S.M., Gupta, A.K. and Singh, S.K. (2014), “Investigation of Material Model for Simulations of Deep Drawing in Dynamic Strain Aging Region”,3rd International Conference on Materials Processing and Characterization (ICMPC 2014), Mar 08-09, 2014.

IC47. Raghuram K.D., Aditya, B., Gupta, A.K. and Singh, S.K. (2014), “Mechanical Properties of Austenitic Stainless Steel 316 at Elevated Temperatures”, International Conference on Structural Integrity (ICONS-2014), IGCAR, Kalpakkam, India, Feb 04-07, 2014

IC46. Kotkunde, N., Aditya, B., Gupta, A.K., and Singh, S.K. (2014), “Flow stress prediction of Ti-6Al-4V alloy at elevated temperature using artificial neural network”, International Symposium on Engineering and Technology, Pune.

IC45.  Jayahari, L., Gupta, A.K.,BaluNaik, B., and Singh, S.K. (2014), "Formability analysis of Austenitic stainless steel-304 under warm conditions”,  9th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Process, Jan 6-10, Deakin University, Melbourne, Australia, AIP Proceedings, pp 402-405.

IC44. Kotkunde, N., Deole, A.D., Gupta, A.K., and Singh, S.K. (2014), “Effect of process parameters on deep drawing of Ti-6Al-4V alloy using finite element analysis”, 9th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Process, Jan 6-10, Deakin University, Melbourne, Australia, pp.1065-68. (AIP Conference Proceedings 1567, 1065 (2013); DOI: 10.1063/1.4850155)

IC43. Sajun P. K, Raghuram K.D., Jayahari, L., Gupta, A.K., and Singh, S.K. (2014), “Finite element modeling and prediction of thickness strains of deep drawing using ANN and LS-Dyna for ASS304”, 9th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Process, Jan 6-10, Deakin University, Melbourne, Australia, pp.1065-68. (AIP Conference Proceedings 1567, 402 (2013); DOI: 10.1063/1.4850000)

2013:

IC42. Kotkunde, N., Deole, A.D., Gupta, A.K., and Singh, S.K. (2013), “Development of constitutive models for Ti–6Al–4V alloy over wide ranges of low strain rates and temperatures”, 8th COPEN 2013, NIT Calicut.

IC41. Kotkunde, N., Deole, A.D., Gupta, A.K., and Singh, S.K. (2013), “A comparative study on modified Johnson-Cook and Fields–Baclofen constitutive models to predict flow behavior of Ti-6Al-4V alloy sheet at elevated temperature” International Conference on Computer Aided Engineering (CAE-2013), IIT Madras.

IC40. Aditya, B., Sharath Chandra G. and Gupta, A.K. (2013), “Multi-objective optimization of turning operations using non-dominated sorting genetic algorithm enhanced with neural network”, International Conference on Advanced Engineering Optimization Through Intelligent Techniques (AEOTIT), Surat, Gujarat, India, July 01-03, 2013, pp 106-110.

IC39. Hansoge, N.K., Singh, Y., Gupta, A.K. and Singh, S.K. (2013), “Prediction of deformation behavior of austenitic stainless steel 304 in dynamic strain aging regime”, International Conference on Materials Processing and Characterization (ICMPC), Hyderabad, March 17-18, 2013.

IC38. Kotkunde, N., Gupta, A.K., Hansoge, N.K., Puranik, P. and Singh, S.K. (2013), “Development of modified Arrhenius model for Ti-6Al-4V alloy to predict flow stress” International Conference on Materials Processing and Characterization (ICMPC), Hyderabad, March 17-18, 2013.

IC37. Kotkunde, N., Gupta, A.K., Hansoge, N.K., Puranik, P. and Singh, S.K. (2013), “Study of flow stress analysis for Ti-6Al-4V alloy using modified Zerilli-Armstrong model”, International Conference on Advances in Materials Processing and Characterization (AMPC), Chennai, February 6-8, 2013, pp 933-939.

IC36. Hansoge, N.K., Singh, Y., Gupta, A.K. and Singh, S.K. (2013), “Flow stress prediction of austenitic stainless steel 304 in dynamic strain aging regime using Arrhenius type equation”, International Conference on Advances in Materials Processing and Characterization (AMPC), Chennai, February 6-8, 2013, pp. 651-659.

2012:

IC35. Singh, S.K., Kranthi Raj, M.L., Bandhavi, B. and Gupta, A.K. (2012), “Characterization and formability of commercially pure titanium at elevated temperature using finite element method”, 4th International and 25th AIMTDR, JadavpurUnivesity, Kolkata, December 14-16, 2012, pp 168-173.

IC34. Hussaini, S.M., Gupta, A.K. and Singh, S.K. (2012), “Determination of the limiting drawing ratio in deep drawing process at different temperatures for austenitic stainless steel,” 4th International and 25th AIMTDR, JadavpurUnivesity, Kolkata, December 14-16, 2012, pp 64-67.

IC33. Kotkunde, N., Gupta, A.K., Hansoge, N.K., Puranik, P. and Singh, S.K. (2012), “Flow stress prediction of Ti-6Al-4V using modified Johnson Cook model”, 3rd Asian Conference on Mechanics of Functional Materials and Structures (ACMFMS), Delhi, December 5-8, 2012, pp 709-802.

IC32. Singh, Y., Hansoge, N.K., Gupta, A.K. and Singh, S.K. (2012), “A comparative study of constitutive models to predict flow stress behaviour in dynamic strain aging regime of austenitic stainless steel 316”, 2nd International Conference on Materials Science, Metal & Manufacturing (M3 2012), Singapore, November 19-20, 2012, pp 98-106.

IC31. Jayahari, L., BaluNaik, B., Gupta, A.K. and Singh, S.K. (2012), “Study of microhardness of deep drawn cups for austenitic stainless steel-304 under warm conditions”, 11th International Conference on High Nitrogen Steels and Interstitial Alloys, Chennai, September 27-29, 2012.

IC30. Sharath Chandra G, Raghuram K.D., Gupta, A.K. and Singh, S.K., (2012) "Predicting flow stress in dynamic strain aging regime of ASS 304 using support vector regression", 11th International Conference on High Nitrogen Steels and Interstitial Alloys, Chennai, September 27-29, 2012.

IC29. Singh, S.K., Sasidhar, V., Kumar, V., Reddy, P. and Gupta, A.K. (2012), “Comparison of warm and hydromechanical deep drawing when low carbon steel is subjected to ironing”, 15th International Conference on Advances in Materials & Processing Technologies, Wollongong, NSW Australia, September 23-26, 2012.

IC28. Bhattacharya, S., Wadhwa, A., and Gupta, A.K. (2012), “Flow stress prediction in austenitic stainless steel 316 at elevated temperatures (673 K – 923 K)” International Conference on Materials Processing and Characterization (ICMPC), Hyderabad, March 8-10, 2012, pp 124-128.

IC27. Sainath, V., Sukesh, M.V., and Gupta, A.K. (2012), “Flow stress prediction in austenitic stainless steel 304 at elevated temperatures” International Conference on Materials Processing and Characterization (ICMPC), Hyderabad, March 8-10, 2012, pp 129-134.

IC26. Hussaini, S.M., and Gupta, A.K. (2012), “Mechanical threshold stress model for prediction of flow stress” International Conference on Materials Processing and Characterization (ICMPC), Hyderabad, March 8-10, 2012, pp 135-138.

2011:

IC25. Gupta, A.K., Hariharan, G. and Sivakumar, A.I. (2011), “Pareto control in multi-objective dynamic scheduling using artificial neural network,” In proceedings of the 2011 International Conference on Advances in Supply Chain and Manufacturing Management (ASCMM 2011), Kharagpur, India, Dec. 16-18, 2011.

IC24. Singh, S.K., Reddy, R. and Gupta, A.K. (2011), "Comparison on Load and Formability of Low Carbon Steel in Warm and Hydro-mechanical Deep Drawing" International Conference on Materials Science, Metal & Manufacturing (M3), Singapore, Dec 12-13, 2011.

IC23. Anirudh, V.K., Amrutha, G., Gupta, A.K. and Singh, S.K. (2011), “Flow stress prediction in austenitic stainless steel 316 at elevated temperatures”, International Conference on Advances in Materials and Materials Processing, IIT Kharagpur, India, Dec 9-11, 2011.

IC22. Jayahari, L., Gaud, R., Gupta, A.K. and Singh, S.K. (2011), "Experimental and Design consideration of Stretching of EDD steel sheet at elevated temperatures" International Conference on Advances in Materials and Materials Processing, IIT Kharagpur, India, Dec 9-11, 2011.

2010:

IC21. Singh, S.K., Swathi, M., Ramjee and Gupta, A.K. (2010), “Experimental Investigations and Thermal Analysis of Formability of EDD Steels in Warm Forming (up to 4500 C)” 3rd International and 24th AIMTDR, College of Engineering AU, Vishakapatnam, India, Dec 13-15, 2010.

IC20. Hussaini, S.M., Majumdar, B., Akhtar, D. and Gupta, A.K. (2010), “Evaluation of glass forming ability in bulk Zr based glasses alloying with Ti, Nb” 2nd International Conference on Production and Industrial Engineering (CPIE), NIT Jalandhar, India, Dec 3-5, 2010.

IC19. Singh, S.K., Kranti Raj, M.L., Hussaini, S.M., and Gupta, A.K. (2010), “Characterization and formability of aluminum IS 737 40800 grade material at elevated temperature” 2nd International Conference on Production and Industrial Engineering (CPIE), NIT Jalandhar, India, Dec 3-5, 2010.

IC18. Singh, S.K. and Gupta, A.K. (2010), “Comparison of yield criteria for warm forming of EDD steel using FEM” International Conference on Computing, New Delhi, India, Dec 27-28, 2010.

2009:

IC17. Singh, S.K. and Gupta, A.K. (2009), “Application of Support Vector Regression in Hydro-mechanical Deep Drawing”, International Conference on Advances in Mechanical Engineering, S.V. National Institute of Technology, Surat, Gujarat, India, Aug 3-5, 2009, 1073-1077.

IC16. Sanghvi, R.S., Azharuddin, M., SaiKiran.J.G., Srikesh, K., Mahesh, K., Gupta, A.K. and Singh, S.K. (2009), “Study of the effect of temperature on material properties of EDD steel using Artificial Neural Network”, International Conference on Advances in Mechanical Engineering, S.V. National Institute of Technology, Surat, Gujarat, India, Aug 3-5, 2009, 1069-1072.

2008:

IC15. Singh, S.K., Gupta, A.K., Kumar, A. and Viswanath, P., (2008) “Application of support vector regression in predicting spring back in V-bending”, 2nd International and 23rd All India Manufacturing Technology, Design and Research Conference (AIMTDR), IIT Chennai, Dec 15-16, 2008, 105-109.

IC14. Gupta, A.K., Lendermann, P., Sivakumar, A.I. and Priyadi, J. (2008), “Simulation analysis of cluster tool operations in wafer fabrication,” In proceedings of the 2008 Winter Simulation Conference (WSC 2008), Miami, Florida, USA, Dec. 07-10, 2008, 2141-2147.

2007 and before

IC13. Gupta, A.K., L Loh,Y,  and Sivakumar, A.I. (2007), “Performance analysis of cluster tools in semiconductor manufac- turing”, SIMTech technical reports, Vol. 10(3), p. 166-173

IC12. Gupta, A.K. and Sivakumar, A.I. (2006), “Pareto control in multi-objective dynamic scheduling of a stepper machine in semiconductor wafer fabrication,” In proceedings of the 2006 Winter Simulation Conference (WSC 2006), Monterey, CA, USA, Dec. 3-6, 2006, 1749-1756.

IC11. Swe, A.N., Gupta, A.K., Sivakumar, A.I., and Lendermann, P. (2006), “Cycle time reduction at cluster tool in semiconductor wafer fabrication,” In proceedings of the 8th Electronics Packaging Technology Conference (EPTC 2006), Singapore, Dec. 6-8, 2006, 671-677.

IC10. Liow L.F., Gupta, A.K. and Gan B.P. (2005), “Batching size effect on inter-fab logistics and production cycle time in borderless fab”, In proceedings of the 3rd International Conference on Modeling and Analysis of Semiconductor Manufacturing (MASM 2005), Singapore, Oct 6-7, 2005, 326-331.

IC9.    Gupta, A.K. and Sivakumar, A.I. (2005), “On-time Delivery Pareto Controllability for Batch Processing in Semiconductor Manufacturing”, In proceedings of the 3rd International Conference on Modeling and Analysis of Semiconductor Manufacturing (MASM 2005), Singapore, Oct 6-7, 2005, 13-20.

IC8.    Gupta, A.K., Sivakumar, A.I. and Ganesan V.K. (2004), “Cycle time reduction in batch processes using look-ahead batch scheduling”, In proceedings of the 33rd International Conference on Computers and Industrial Engineering, Jezu, Korea, CIE 253. [Received Dr Eldin’s Best Paper Award and Prize]

IC7.    Ganesan V.K., Gupta, A.K., and Sivakumar, A.I. (2004), “Bi-objective schedule control of batch processes in semiconductor manufacturing”, In proceedings of the IEEE Conference on Robotics, Automation and Mechatronics (RAM-2004), Singapore, Dec. 1-3, 2004, 1077-1082.

IC6.    Gupta, A.K., Sivakumar, A.I., and Ganesan, V.K. (2004), “Look ahead batching to minimize earliness/tardiness measures in batch processes”, In proceedings of the IEEE Conference on Robotics, Automation and Mechatronics (RAM-2004), Singapore, Dec. 1-3, 2004, 1101-1106.

IC5.    Ganesan V.K., Gupta, A.K., and Sivakumar, A.I. (2004), “Dynamic bi-objective Pareto-schedule generation and control in semiconductor supply chain”, In proceedings of the IEEE International Engineering Management Conference (IEMC-2004), Singapore, Oct. 18-21, 2004, 1212-1216.

IC4.    Gupta, A.K., Ganesan V.K. and Sivakumar, A.I. (2004), “Hot lot management: minimizing cycle time in batch processes”, In proceedings of the IEEE International Engineering Management Conference (IEMC-2004), Singapore, Oct. 18-21, 2004, 1217-1221.

IC3.    Gupta, A.K., Sivakumar, A.I., and Sarawgi, S. (2002), “Shop floor scheduling with simulation based proactive decision support”, In proceedings of the 2002 Winter Simulation Conference (WSC 2002), San Diego, California, USA, 1897 -1902.

IC2.    Gupta, A.K. and Sivakumar, A.I. (2002), “Simulation based multiobjective schedule optimization in semiconductor manufacturing”, In proceedings of the 2002 Winter Simulation Conference (WSC 2002), San Diego, California, USA, 1862 -1870.

IC1.    Gupta, A.K. and Sivakumar, A.I. (2002), “Approaches to multiobjective scheduling optimization in semiconductor back-end”, In proceedings of the 2nd International Conference on Modeling and Analysis of Semiconductor Manufacturing (MASM 2002), April 10-12, 2002, Tempe, Arizona, USA, 223-228

 

Publications in National Conferences:

NC3. PS Priyatham, D Agarwal, AK Gupta. (2023), “Topology Optimization for Designing a Wheel Rim”, National Conference on Multidisciplinary Analysis and Optimization (NCMAO), IIT Madras, 331-338.

NC2. Singh, S.K. and Gupta, A.K. (2009), “Neural network and support vector regression modeling of turning operation”, National Conference on Recent Advances in Manufacturing Technology (NCRAMT), Mar 14-15, 2009, SASTRA University, Thanjavur, Tamilnadu, India, 132-140.

NC1.   Agarwal, A., Karthickeyan, Y., Pulsingh P. and Gupta, A.K. (2008), “Multi-objective optimization of machining parameters using non-dominated sorting genetic algorithm-II,” In proceedings of the National Conference on Algorithms 2008 (NCA 2008), Mumbai, India, May 16-17, 2008.


Publications

Journals

  1. Degradation of anthracene and pyrene supplied by microcrystals and by non-aqueous phase liquids - Srikanth Mutnuri, N.Vasudevan and Matthias Kaestner*, Applied Microbiology and Biotechnology, Vol. 67 (2005), pp. 569 - 576
  2. Changes in Fatty Acid Composition of Chromohalobacter israelensis with varying Salt Concentrations - Srikanth Mutnuri, N.Vasudevan, Matthias Kaestner and Hermann Heipeiper*. Current Microbiology, Vol. 50 (2005), pp. 1–5.
  3. Influence of bioaugmentation with wheat bran on bioremediation of anthracene contaminated soil - Srikanth Mutnuri, N.Vasudevan* and D.Beck, Asian Journal of Microbiology, Biotechnology and Environmental Sciences, 2005.
  4. Biocatalytic production of a commercial textile dye (Indigo) from a xenobiont – Srikanth Mutnuri*, Chanakya Bandi and Anasuya Ganguly, Research Journal of Microbiology, Vol 4, Is 3 (2009), pp 82 – 88.
  5. Effect of caffeine and saponin on anaerobic digestion of food waste – Vidhya Prabhudesai, Anasuya Ganguly and Srikanth Mutnuri* “Annals in Microbiology” Vol 59, Is 4 (2009), pp 643 – 648.
  6. Biodegradation of hydrocarbons in the presence of cyclodextrins - Sivaraman C, Anasuya Ganguly and Srikanth Mutnuri* "World Journal of Microbiology and Biotechnology" Vol 26, Is 2 (2010), pp 227 - 232.
  7. Biogas Generation Potential by Anaerobic Digestion for Sustainable Energy Development in India – P.Venkateswara Rao, Ranjay Dey, S.S.Baral and Srikanth Mutnuri. Renewable  and Sustainable Energy reviews Volume 14, Issue 7, September 2010, Pages 2086-2094.
  8. Isolation of Hydrocarbonoclastic bacteria from Bilge oil contaminated water - Sivaraman C, Anasuya Ganguly, Marcell Nikolauszand Srikanth Mutnuri. Accepted in International Journal of Environmental Science and Technology Vol 8, No.3, Summer 2011. (Impact factor 3.157)
  9. “Cloning and expression of catechol 2, 3 dioxygenase and cyclodextrin glucanotransferase gene in Coli and its role in biodegradation“ C.Sivaraman, Anasuya Ganguly and Srikanth Mutnuri “International Journal of life Science and Pharma Research” Vol 2/Issue 3/Jul-Sept 2012 pp L10 – L19.
  10. Role of Cyclodextrin Glucanotransferase Enzyme in Biodegradation C.Sivaraman, Anasuya Ganguly and Srikanth Mutnuri “Advances in Environmental Research” (2012), Vol. 1, No. 2 pp97-108.
  11. Study of a Marine Microbial Fuel Cell on a Pilot Scale. Chithralekha and Srikanth Mutnuri, “Chemical Sciences Transactions”., 2013
  12. Biochemical Methane Potential of Agro Wastes," Vidhya Prabhudesai, and Srikanth Mutnuri Journal of Energy, vol. 2013, Article ID 350731, 7 pages, 2013.
  13. Role of additional carbon substrate on biodegradation of 1,4 dioxane using bacterial consortium enriched from industrial sludge P.Arulazhagan, T. Yeom, Sivaraman C, Srikanth Mutnuri  and Rajesh Banu, accepted in Advances in Environmental Biology (2013).
  14. Biodegradation of crude oil by Pseudomonas aeruginosa  and Escherichia fergusonii isolated from Goan coast. Rajesh  Pasumarthi, Sivaraman Chandrasekharan, Srikanth Mutnuri. Accepted in Marine Pollution Bulletin 76(1-2):276-82 (2013).
  15. Terra Preta as an Alternative for the Management of Sludge from Wastewater Treatment Plants Prabhu, M. Horvat, L. Lorenz, R. Otterpohl, T. Bettendorf and S.Mutnuri  in: Bettendorf, T Wendland, C.; Otterpohl, R. 2014. Terra Preta Sanitation handbook.  (2014) Publisher: Deutsche Bundesstiftung Umwelt ISBN 978-3-00-046586-4.
  16. Effect of terra preta compost on growth of Vigna radiate Prabhu, M. Horvat, L. Lorenz, R. Otterpohl, T. Bettendorf and S.Mutnuri  in: Bettendorf, T Wendland, C.; Otterpohl, R. 2014. Terra Preta Sanitation handbook.  (2014) Publisher: Deutsche Bundesstiftung Umwelt ISBN 978-3-00-046586-4.
  17. Cow urine as a potential source for struvite production Meghanth Prabhu and Srikanth Mutnuri accepted in International Journal of recycling of organic waste in agriculture (2014).
  18. "Pre-treatment of Cottage Cheese to Enhance Biogas production," by Vidhya Prabhudessai, Bhakti Salgaonkar, Judith Braganca and Srikanth Mutnuri accepted in BioMed Research International (2014)
  19. Comparison of bacterialdiversity from solarsalterns and a simulatedlaboratorystudy by Kabilan Mani, Bhakti Salgaonkar, Srikanth Mutnuri and Judith Braganza accepted in Annals of Microbiology (2014)
  20. Biocatalytic production of indigo using biphasic organic solvent by Vaishnavi Unde and Srikanth Mutnuri, Vol5, No.13 2014 pp.3-10, 2014 in Discovery Biotechnology.
  21. Biodegradation of Aliphatic hydrocarbons in the presence of Hydroxy Cucurbit[6]uril Rajesh  Pasumarthi, Vikas Kumar, Sivaraman Chandrasekharan, Mainak Banerjee, Anasuya Ganguly, Srikanth Mutnuri. Marine Pollution Bulletin 88 (1), 148-154, (2014).
  22. Identification of metabolically active methanogens in anaerobic digester by DNA Stable-Isotope Probing using 13C-acetate Gowdaman and Srikanth Mutnuri Carbon – Science and Technology 7/2 (2015) 8 - 16.
  23. Digestate from anaerobic reactor as a potential fertilizer Navodita Bhatnagar and Srikanth Mutnuri ,Carbon – Science and Technology 7/2 (2015) 17 - 24.
  24. Anaerobic co-digestion of food waste and septage – A waste to energy project in Nashik city Meghanath Prabhu, Sachin Waigaonkar, Regina Dube, Dirk Walther and Srikanth Mutnuri. Carbon – Science and Technology 7/2 (2015) 87 - 98.
  25. Vaishnavi Unde and Srikanth Mutnuri, “Comparative study of production of Bio-Indigo byPandoraea sp. in a two phase -Fed batch and continuous bioreactor” Carbon – Science and Technology 8/1 (2016) 40 - 46.
  26. Meghanath Prabhu, Srikanth Mutnuri, Santosh Kumar Dubey and Milind Mohan Naik. (2014). One-Pot Rapid Synthesis of Face-Centered Cubic Silver Nanoparticles Using Fermented Cow Urine, A Nanoweapon Against Fungal and Bacterial Pathogens. Journal of Bionanoscience. 8: 1–9.
  27. Meghanath Prabhu and Srikanth Mutnuri (2016). Anaerobic Co-digestion of Sewage Sludge and Food Waste. Waste management and research. 1-9. DOI: 10.1177/0734242X16628976.
  28. Anant YadavPiyush ChoudharyNeelam AtriSebastian TeirSrikanth Mutnuri (2016) Pilot project at Hazira, India, for capture of carbon dioxide and its biofixation using microalgae Environmental Science and Pollution Research pp 1-8.
  29. Jayashree, Tamilarasan, M. Rajkumar, P. Arulazhagan, K.N. Yogalakshmi, M. Srikanth, J. Rajesh Banu (2016) Treatment of seafood processing wastewater using upflow microbial fuel cell for power generation and identification of bacterial community in anodic biofilm. Journal of Environmental Management Volume 180, Pages 351–358.
  30. Amal Raj, Rajesh Pasumarthi, Srikanth Mutnuri (2016). EFFECT OF RHAMNOLIPID ON BIODEGRADATION OF HYDROCARBONS IN NON AQUEOUS PHASE LIQUID (NAPL). Bioremediation journal.Vol 20. Pages 183-193

 

  1. Rajesh Pasumarthi and Srikanth Mutnuri (2016). Horizontal gene transfer versus biostimulation: a strategy for bioremediation in Velsao sea water, Goa. Marine Pollution Bulletin. Vol113, Pages 271-276

 

  1. Starlaine Mascarenhas, Srikanth Mutnuri, Anasuya Ganguly (2017) Deleterious role of trace elements – Silica and Lead in the development of chronic kidney disease. Chemosphere. Volume 177, June 2017, Pages 239–249

 

  1. Anant Yadav, Florent Chazarenc, Srikanth Mutnuri (2018). Development of the "French system" Vertical flow Constructed Wetland to treat raw domestic wastewater in India, Ecological Engineering, Volume 113, 1 April 2018, Pages 88-93

 

  1. Ram Chavan, Srikanth Mutnuri (2018). Tertiary Treatment of Domestic Wastewater by Spirulina platensis Integrated to Microalgal Biorefinery
    Biofuels, Accepted for Publication.
  2. Guruprasad Talekar, Priya Sharma, Anant Yadav, Peter Clauwaert, Korneel Rabaey and Srikanth Mutnuri (2018) Sanitation of blackwater via sequential wetland and electrochemical treatment – Nature Partner Journal Clean water. 1, Article number: 14.
  3. Starliane Mascarenhas, Srikanth Mutnuri and Anasuya Ganguly (2018). Silica - A trace geogenic element with emerging nephrotoxic potential - Science of the Total Environment 645 (2018) 297–317
  4. Paul M. Jones, Quentin Lonne, Pedro Talaia, Glenn J. T. Leighton, Gerardine G. Botte, Srikanth Mutnuri & Leon Williams (2018) A Straightforward Route to Sensor Selection for IoT Systems, Research-Technology Management, 61:5, 41-50, DOI: 10.1080/08956308.2018.1495965
  5. Priya Sharma, Devendra Kumar and Srikanth Mutnuri. UPLC-MS/MS method validation of Ciprofloxacin in human urine: Application to biodegradability study in Microbial Fuel Cell. Biomedical chromatography (2018).
  6. Priya Sharma, Srikanth Mutnuri Nutrient Recovery and Microbial Diversity in human urine fed microbial fuel cell. Water Science and Technology 79 (4): 718-730 (2019)
  7. Ram Chavan and Srikanth Mutnuri. Demonstration of pilot scale integrative treatment of nitrogenous industrial effluent for struvite and algal biomass production. Journal of Applied Phycology. 32(9) 2020.
  8. Ram Chavan and Srikanth Mutnuri. (2019) Phycoremediation and biogas production potential of Chlorella vulgaris grown in secondarily treated wastewater, International Journal of Recent Technology and Engineering (IJRTE), 8:3,1939-1945. DOI:10.35940/ijrte.C4477.098319
  9. Ram Chavan and Srikanth Mutnuri. (2020) Domestic wastewater treatment by constructed wetland and microalgal treatment system for the production of value-added products. (Accepted- Environmental Technology Journal).
  10. R Rajashree Yaragal, Devendra Kumar and Srikanth Mutnuri (2020) Development of UPLC-MS/MS method for analyzing phorate: application to wastewater treatment. Accepted in Journal of the Iranian Chemical Society
  11. Talekar GV and Mutnuri S (2020) Membrane Selection for Electrochemical Treatment of Septage. Front. Energy Res. 8:20.
  12. Influence of Domain Experience on Icon Recognition and Preferences" in Behaviour& Information Technology.2020 Junyi Xie, Divya Unnikrishnan, Leon Williams, Adriana Encinas-Oropesa, Srikanth Mutnuri, Nitin Sharma, Paul Jeffrey, Binxin Zhu & Paul Lighterness

 

  1. "Electro-Fenton treatment of real pharmaceutical wastewater paired with a BDD anode: reaction mechanisms and respective contribution of homogeneous and heterogenous •OH" Chemical Engineering Journal (Impact Factor 10.65) Hugo Olvera-Vargas, Nissim Gore-Datar, Orlando Garcia-Rodriguez, Srikanth Mutnuri, Olivier Lefebvre Accepted 2020
  2. "Diversity and Functional Annotation of Microorganisms in French Vertical Flow Constructed Wetland Treating Greywater", World Journal of Microbiology and Biotechnology.(2020) 36(10)148 Swapnil Punyapwar and Srikanth Mutnuri
  3. Demonstration of energy and nutrient recovery from urine by field-scale microbial fuel cell system. Process Biochemistry, Volume 101, February 2021, Pages 89-9. Priya Sharma, Guruprasad V.Talekar, SrikanthMutnuri
  4. Enhanced photocatalytic and antibacterial activity of ZnO/Graphene nanocomposites Madhavi D Shete, Julio B Fernandes, MeghanathShambhu Prabhu, Srikanth Mutnuri (2021 accepted) International Journal of Applied Biology and Pharmaceutical Technology
  5. Electrochemical removal and recovery of ammonia and phosphates from blackwater and wetland passed blackwater  Guruprasad Talekar and Srikanth Mutnuri Sustainable Energy Technologies and Assessments 47 (2021) 101374
  6. A novel and sustainable approach for biotransformation of phosphogypsum to calcium carbonate using urease producing Lysinibacillus sphaericus strain GUMP2 Environmental Technology Prajakta Pratap Patil; Srikanth Mutnuri, MeghanathPrabhu (2021)
  7. Recovery of Lignocellulolytic Enzymes and Valorization of Spent Mushroom Substrate, Anumeha Vats, Anuj Sangam Kurade and Srikanth Mutnuri Environment and Natural Resources Journal (2021 accepted)
  8. Development of Sensitive and Selective UPLC-MS/MS Method for the Quantification of Vitamin D2 (Ergocalciferol) and its Demonstration in Agaricus bisporus. Anumeha Vats, Ram Chavan, Devendra Kumar, Sangam A Kurade, Srikanth Mutnuri. Journal of Liquid Chromatography & Related Technologies (2021 accepted)
  9. Nitrate removal using ion exchange resin: Batch, continuous column and pilot scale studies, Rajashree Yaragal and Srikanth Mutnuri. International Journal of Environmental Science and Technology (2021 accepted)
  10. Anaerobic Co-digestion of Organic Fraction of Municipal Solid waste and Septage for Sustainable Waste Treatment: A Case Study from Goa, India. Shet, R., & Mutnuri, S. (2021). European Journal of Energy Research, 1(3), 1-8.
  11. Whey Fortified Ready-To-Reconstitute Elephant Apple (Dillenia Indica) Juice Powder: Methodical Optimization, Micro-Structural and in Vitro Digestion Analyses " in Journal of Food Technology Research (2022)
  12. "Laundry greywater treatment by anaerobic filters and vertical flow constructed wetlands" (2022) in Water and Environment Journal.Swapnil Punyapwar and Srikanth Mutnuri  
  13. Generalised Network Architectures for Environmental Sensing: Case Studies for a Digitally Enabled Environment Array Array (2022) M. I. Mead ; M. Bevilacqua ; C. Loiseaux ; S.H. Hallett ; S. Jude ; C. Emmanouilidis ; J.Harris ; P. Leinster  ; S. Mutnuri ; T. H. Tran ; L. Williams .
  14. "“Integration of bio-electrochemical systems and wetlands for wastewater treatment and resource recovery”" book "Novel Approaches Towards Wastewater Treatment and Resource Recovery Technologies" PriyaSharmaGuruprasad V.TalekarJayantaGogoiSrikanthMutnuri
  15. Terra Preta: Organic Manure from Septage for Improving Crop Productivity

in Science Frontiers. Ravi Kiran Shet and Srikanth Mutnuri. 2022

61 “Pathogen treatment in single and two stage vertical flow wetland as a potential

       sanitation technology for rural India” accepted in  journal Nature Environment and 

       Pollution Technology. Prajakta Patil, Anant Yadav, Lalita Baragi, Srikanth Mutnuri

62 Effect of salt dosage on the performance efficiency of the electro-oxidation

    process employed for integrated blackwater treatment accepted (2022) International Journal of Environmental Science and Technology, Jayanta Gogoi, Guruprasad Talekar, Priya Sharma, Srikanth Mutnuri

63 Comparative study on performances of modified vertical flow constructed wetlands for treatment of domestic wastewater: A Case Study  Rajashree R. Yaragal; Srikanth Mutnuri Journal of Environmental Engineering (2022) accepted.

  1. STUDY ON EFFECTIVENESS OF INTERVENTION OF A VERTICAL FLOW CONSTRUCTED WETLAND IN BETWEEN SEPTIC TANK AND SOAK PIT FOR THE TREATMENT OF SEPTIC TANK EFFLUENT" and have recommended for the publication in the journalNatureEnvironment and Pollution Technology. S. Suresh, P. Sharma, R. R. Yaragal and S. Mutnuri in Vol. 22, No. 1 (March), Year 2023.

 

67 Rajesh Pasumarthi, Gajanan Sawargaonkar, Nallagatla Vinod Kumar, Santosh Kale, Pushpajeet L Choudhari, Srikanth Mutnuri and ML Jat Innovative bio-pyrolytic method for efficient biochar production from maize and pigeonpea stalks and their characterization: Journal of Cleaner Production (2024) Impact factor 11.1

  • Olvera-Vargas, H., Selvam, S., Veer, R., García-Rodríguez, O., Mutnuri,S., Lefebvre, O., A sustainable activated carbon fiber / TiO2 cathode for the photoelectro-Fenton treatment of pharmaceutical pollutant enalapril, Chemosphere (2024). Impact factor 8.8
  • Jayanta Kumar Gogoi;Srikanth Mutnuri "Removal of nitrogen and

phosphorous from blackwater via integrated nature-based system: Hybrid-          Vertical flow constructed wetland, Upflow anaerobic fixed biofilm reactor and      

          Granular activated charcoal column along with in-situ electrochlorination    

          disinfection" Journal of Water, Sanitation and Hygiene for Development

         (2024)14 (1): 1–14. Impact factor 1.7

  1. Jayanta Kumar Gogoi , Priya Sharma , Guruprasad Talekar  , Swapnil                                  

        Punyapwar  , Keyur Namdev  , Srikanth Mutnuri. Demonstration and performance      

        analysis of on-beach public toilet with a decentralised modified French vertical

        flow constructed wetland and ex-situ electrochlorination integrated treatment

        system, Water Practice and Technology (2024). Impact factor 1.6

  1. Ndeye Aida Ndiaye, Srikanth Mutnuri, Anant Yadav, Halima Maiguizo-Diagne,

        Mohamed Lamine Gaye and Saliou Fal “Investigation of the potential of

        energy recovery from poultry droppings in a semi-industrial farm in the

       Sangalkam, Senegal” 2024 International Journal of Environment and               

       Climate Change

 

  1. Morten Kam Dahl DueholmKasper Skytte AndersenAnne-Kirstine C. KorntvedVibeke RudkjøbingMadalena AlvesYadira Bajón-FernándezDamien BatstoneCaitlyn ButlerMercedes Cecilia CruzÅsa DavidssonLeonardo ErijmanChristof HolligerKonrad KochNorbert KreuzingerChangsoo LeeGerasimos LyberatosSrikanth MutnuriVincent O’FlahertyPiotr Oleskowicz-PopielDana PokornaVeronica RajalMichael RecktenwaldJorge RodríguezPascal E. SaikalyPer Halkjær Nielsen

MiDAS 5: Global Diversity of Bacteria and Archaea in Anaerobic Digesters, Nature Communications. 15,: 5361 (2024)

 

  1. Gajanan L Sawargaonkar., Rajesh Pasumarthi, Santosh Kale, Pushpajeet Choudhari, Srikanth Mutnuri, Ajay Singh, Harikishan Sudini, Manasa Ramaraju, Ramesh Singh and Mangi L Jat.

Valorization of Peanut Shells through Biochar Production using Slow and Fast Pyrolysis and its Detailed Physicochemical Characterisation. Frontiers in Sustainability (2024)

 

  1. Shaikh Aatiya Nishaat, Srikanth Mutnuri
    Chapter Title : Study of Anaerobic Digestion Mediated Micropollutant Degradation by UPLC-MS/MS Book: Biological and Hybrid Wastewater Treatment Technology.
    DOI : 10.1007/978-3-031-63046-0.(2024)
  2. Mamta Kodarkar and Srikanth Mutnuri (2024) Isolation of chymopapain from Carica papaya latex and Its application in biorestoration of paper. “Journal of Environmental Science & Engineering”.
  3. Patil PP and Mutnuri S. Study of helminth eggs (Ascaris suum)inactivation by anaerobic digestion and electrochemical treatment. Gates Open Res2024, 7:93

      (https://doi.org/10.12688/gatesopenres.14573.2)

Book Chapters

“Hydrocarbonoclastic capability of a Bacillus sp. Isolated from marine waters” Srikanth Mutnuri and Vasudevan Namasivayam Published in Water and Environment Management Series.2003. Ed. by Rema Devi and Naved Ahsan. IWA publishing, Pg No 691 – 694.

“Biosurfactant production by an extremely halophilic bacterium” Srikanth Mutnuri Vasudevan Namasivayam and Matthias Kästner Published in Water and Environment Management Series.2003. Ed. by Rema Devi and Naved Ahsan. IWA publishing, Pg No 761 – 768.


Research Articles

  • Dirichlet type spaces in the unit bidisc (with R. Gupta and V. Venugopal): Preprint, link: https://arxiv.org/pdf/2406.16541.
  • On completely alternating sequences generated by rational functions (with R. Nailwal): Preprint, link: https://arxiv.org/pdf/2406.13291
  • Isometric Dilation for Representations of Product Systems (with S. Barik and B. Solel): To be appeared in Proceedings A of the Royal Society of Edinburgh, link: https://arxiv.org/pdf/2401.01775.
  • Commutant Lifting in Several Variables (with S. Barik and B.K. Das): To be appeared in Journal of Operator Theory, link: https://arxiv.org/pdf/2004.02254.
  • Dilations and Operator Models on W-hypercontractions (with B. Krishna Das, R. Debnath and S. Panja): Complex Analysis and Operator Theory 17:22 (2023), 1-36, link: https://arxiv.org/pdf/2205.11301.
  • Hypercontractions and Factorization of Multipliers in One and Several Variables (with B. Krishna Das and J. Sarkar): Journal of Operator Theory 88(2022) no. 2, 479-510, link: https://arxiv.org/pdf/1812.08143.
  • Beurling quotient modules on the polydisc (with B. Krishna Das, Ramlal Debnath and J. Sarkar): Journal of Functional Analysis 282(2022) no. 1 (18 page), link: https://arxiv.org/pdf/2103.13981.
  • Commuting row contractions with polynomial characteristic functions (with Kalpesh J. Haria and J. Sarkar): Acta Sci. Math(Szeged) 87(2021), 429-461, link: https://arxiv.org/pdf/2008.01799.
  • Factors of Hypercontractions (with B. Krishna Das): Journal of Operator Theory 85(2021) no. 2, 443-462, link: https://arxiv.org/pdf/1908.10790.
  • Dilations, Wandering Subspaces and Inner Functions (with J. Sarkar, D K Keshari and J. Eschmeire): Linear Algebra and its Applications 523(2017), 263-280, link: https://arxiv.org/pdf/1509.07084.
  • Operator Positivity and Analytic Models of Commuting Tuples of Operators (with J. Sarkar): Studia Mathematica 232(2016), 155-171, link: https://arxiv.org/pdf/1502.00670.

Journal Articles

  1. “Doing ‘Coolie’ Work in a ‘Gentlemanly’ Way: Gender and Caste on Famine Public Works in Colonial North India”, Modern Asian Studies, 57 (2), 351-379, 2023: https://doi.org/10.1017/S0026749X21000743

  2. “‘Men Diggers and Women Carriers’: Gendered Work on Famine Public Works in Colonial North India”, International Review of Social History, 65 (1), 71-98, 2020: https://doi.org/10.1017/S0020859019000579


Book Chapters

“Women’s Work in Nineteenth Century Rural Bihar” in Women in Rural Production Systems: The Indian Experience, eds. V.K. Ramachandran, Madhura Swaminathan and Shruti Nagbhushan,  (Tulika Books, Columbia University Press, 2020)


Book Reviews

Madhavi Jha, Review: Simonow, Joanna: Ending famine in India. A Transnational History of Food Aid and Development, c. 1890-1950, Leiden 2023, in: H-SozKult, 28.05.2024, https://www.hsozkult.de/publicationreview/id/reb-137216

 

 

 

 

 


Publications


Publications

  1. Small degree unramified coverings of the affine line in positive characteristic, thesis, Purdue University, 1994.
  2. Linear disjointness of coverings of affine spaces, Journal of Pure and Applied Algebra, vol 114, p.59-68, (1996).
  3. Linear Disjointness by Polynomial Substitutions, Communications in algebra, vol 24 no 11, p. 3519-3524, (1996)
  4. (with S. S. Abhyankar) Descent Principle in Modular Galois Theory, Proceedings of Indian Academy of Sciences (Mathsci ), vol 111 no. 2, p. 139-149, (2001)
  5. (with S. Gangopadhyaya and S. Maitra) Patterson-Wiedemann construction revisited (Extended Abstract), Electronic Notes in Discrete Mathematics, vol 15, p. 87-92, (2003)
  6. Drinfeld Iterations and Wagner's Theorem, Communications in Algebra, vol 32, no. 12, p. 4675-4685, (2004)
  7. (with S. gangopadhyaya and S. Maitra) Patterson-Wiedemann construction revisited, Discrete Mathematics, vol 306 p. 1540-1556, (2006)
  8. Multiplication : From Thales to Lie, Resonance, Indian Academy of Sciences, vol 17, no 5, (2012)
  9. (With Kumari, Priyanka) Polynomial Criterion for Abelian Difference Sets, Indian Journal of Pure and Applied Mathematics, 51(3), 233-249, 2020.
  10. (With Kumari, Priyanka) Algebraic Methods in Difference Sets and Bent Functions, Journal of Algebra Combinatorics Discrete Structures and Applications (jacodesmath) 8(2), p. 139-149, 2021

Journal: International (Published/Accepted)