Feedback

Prof. Jeevan Jaidi

Professor
Department of Mechanical Engineering

CFD Studies in Phase-change Materials and Integration with Heat Pipes, CFD and FEA Modeling and Simulations of Engineering & Manufacturing Processes, Energy conversion Storage and Management in Batteries and Fuel Cells, Thermal Mechanical Metallurgical Electrical Surface phenomena Modeling in Welding (RSW/FSW/GTAW/GMAW/Laser/Hybrid) process.
Birla Institute of Technology & Science, Pilani
Hyderabad Campus
Jawahar Nagar, Kapra Mandal
Dist.-Medchal-500 078
Telangana, India

Research Publications

Journal Papers:

17.  Ramana Murthy Bagadi, Jeevan Jaidi, Karthik G M, Prashanth Kumar Reddy G (May 2024), Effect of Tool Rotational Speeds on Material Flow and Strain Rates During Friction Stir Butt Welding of AA2219-T87 Plates, International Journal of Modelling and Simulation (accepted).

16.  Ramana Murthy Bagadi, Jeevan Jaidi, Atmakur Venugopal Rao, Suresh Dadulal Meshram, Tool-pin Profile Effects on Thermal and Material Flow in Friction Stir Butt Welding of AA2219-T87 Plates: A coupled Eulerian model development and study, Int J Adv Manuf Technol 131, 5881–5896 (2024).

15.  Prashanth Kumar Reddy Gillela, Jeevan Jaidi, Karthik Gangaraju Manogna, Sudipta Pramanik (2024), Experiments and Simulations based Study on Resistance Spot Welding Process Parameters vs. Weld Quality of HSLA 340 Steel Sheets, International Journal of Advanced Manufacturing Technology (under review).

14.  Prashanth Kumar Reddy Gillela, Jeevan Jaidi, Venugopal Gude, Sunil Kumar Pathak, Effect of Forge-time on Electrode Indentation, Thermal and Residual Stress Fields   in Resistance Spot Weld Joints of AISI 1008 Steel Sheets, Trans Indian Inst Met (2024) 77(4):1025–1038

13.  Jeevan Jaidi, Abhishek Goyal, Venkoba Rao B, Two-phase Turbulent Mixing in a Flotation Cell: A numerical study on air-bubble formation and dispersion, Transactions    of the Indian Institute of Metals, Special Issue in International Journal of Minerals Metals and Materials Engineering (2022). (under review)

12.  Prashanth Kumar Reddy Gillela, Jeevan Jaidi, Venugopal Gude, Sunil Kumar Pathak, Dinesh Srivastava, A numerical study on contact conditions, dynamic resistance and nugget size of Resistance Spot Weld joints of AISI 1008 steel sheets, Numerical Heat Transfer, Part A: Applications 2022, 84(2), 1-19. (Citations =1)

11.  Jeevan Jaidi, Chitta Sandeep Dattu, Chaithanya Akkaldevi, Satyam Panchal, Michael Fowler, Roydon Fraser, Performance study on the effect of coolant inlet conditions for 20 Ah LiFePO4 prismatic battery with commercial minichannel cold-plates, Electrochem 2022, 3(2), 259-275. (Citations =40)

10.   Chaithanya Akkaldevi, Chitta Sandeep Dattu, Jeevan Jaidi, Satyam Panchal, Michael Fowler, Roydon Fraser (2021), Coupled Electrochemical-thermal simulations and validation of minichannel cold-plate water cooled prismatic 20Ah LiFePO4 battery, Electrochem 2021, 2(4), 643-663. (Citations =80)

9.   Chitta Sandeep Dattu, Akkaldevi Chaithanya, Jeevan Jaidi, Satyam Panchal, Michael Fowler, Roydon Fraser, Comparison of Lumped and 1D electrochemical models for Prismatic 20Ah LiFePO4 battery sandwiched between minichannel cold-plates,  Applied Thermal Engineering 2021, vol. 199, 117586. (Citations =82)

8.   Suraj S Pillai, Mayank Rajput, Hitesh Patel, Jeevan Jaidi, Shivakant Jha, Siddharth Kumar, A Study on Irradiated Welding Joints in ITER Materials and Its Effects on FMECA Analysis of Components, Fusion Engineering and Design 2020, vol. 158, 111905. (Citations = 4)

7.    Madhavi B, Jeevan J, Influence of Strain Hardening Behaviour in Friction Stir Welded Joints of Aluminium-alloy Plates, Materials today proceedings 2018, vol. 5, Issue 2P1, pp. 3851–3860. (Citations = 9)

6.  Rinu Thomas, Sreesankaran M, Jeevan Jaidi, Dileep M Paul, Manjunath P, Experimental Evaluation of the Effect of Variable Compression Ratio on Performance and Emission of SI Engine Fuelled with Petrol and n-Butanol Blend at Different Loads, Perspectives in Science 2016, vol. 8, pp. 743-746. (Citations = 37)

5.   Nikhil T, Shreyas M, Jeevan Jaidi, Karthik Teja M, Predicted and Measured Thermal     Profiles during Friction Stir Welding Process of Aluminium-alloy, International Journal of Applied Engineering Research (IJAER) 2015, vol. 10, pp: 607-612.

4.   B Madhavi, J Jeevan, M Karthik Teja, Heat and Material Flow Effects on Microstructures and Hardness in Friction-stir Welded Joints, Procedia Engineering 2014, vol. 86, pp. 209-214. (Citations =2)

3.  Satyam S Sahay, Jeevan Jaidi, Karthik Krishnan, Efficiency Enhancing Solution for Heat Treatment Operations: Model based design of optimal process cycles, Transactions of the Indian Institute of Metals 2004, vol. 57, issue 5.

2.   J Jaidi, P Dutta, Three-Dimensional Turbulent Weld Pool Convection in a Gas Metal Arc    Welding Process, Science and Technology of Welding and Joining 2004, vol. 9, no. 5, pp. 407–414. (Citations = 30)

1.  J Jaidi, P Dutta, Modeling of Transport Phenomena in a Gas Metal Arc Welding    Process, Numerical Heat Transfer, Part A 2001, vol. 40, pp. 543-562. (Citations = 28)

Conference Papers:

33.  Ramana Murthy Bagadi, Jeevan Jaidi, Karthik G M, Suresh D Meshram (2023), Thermomechanical Modeling and Analysis of Friction Stir Butt Welding of Aerospace Grade Aluminium-alloy (2219-T87) Plates, 9th International & 30th All India Manufacturing Technology, Design and Research Conference (AIMTDR-2023), during 8-10 December 2023, IIT (BHU), Varanasi, India

32.  Ramana Murthy Bagadi, Jeevan Jaidi, Karthik G M, Prashanth Kumar Reddy G (2023), Numerical Study of the Effect of Tool Rotational Speeds on Material Flow and Strain Rates During Friction Stir Butt Welding of AA2219-T87 Plates, 9th International & 30th All India Manufacturing Technology, Design and Research Conference (AIMTDR-2023), during 8-10 December 2023, IIT (BHU), Varanasi, India

31.  Prashanth Kumar Reddy Gillela, Jeevan Jaidi, Karthik Gangaraju Manogna (2023), Finite-Element Simulation Study of Electrode Configurations on Weld Quality Parameters of Resistance Spot Welding of Aluminium-alloy/Steel Sheets, 9th International & 30th All India Manufacturing Technology, Design and Research Conference (AIMTDR-2023), during 8-10 December 2023, IIT (BHU), Varanasi, India

30.  Prashanth Kumar Reddy Gillela, Jeevan Jaidi, Raman Murthy Bagadi, Gandham Phanikumar (2023), Effect of Electrode Load Schedules on Nugget Size and Residual Stresses in Resistance Spot Welding of Mg-alloy/Steel Sheets: A numerical study, 9th International & 30th All India Manufacturing Technology, Design and Research Conference (AIMTDR-2023), during 8-10 December 2023, IIT (BHU), Varanasi, India.

29.  Ramana Murthy Bagadi, Jeevan Jaidi, Prashanth Kumar Reddy G, Numerical Study on Material Flow, Stresses and Strain Rates in Friction Stir Welding of Aluminium-alloy (AA2219) Plates, ME@75 Research Frontiers Conference, Dept. of Mechanical Engineering, Indian Institute of Science, Bengaluru, INDIA, June 29 - July 01, 2022.

28.  Prashanth Kumar Reddy Gillela, Jeevan Jaidi, Raman Murthy Bagadi, Coupled Phenomena Model for Resistance Spot Welding of AISI 1008 Steel Sheets, ME@75 Research Frontiers Conference, Dept. of Mechanical Engineering, Indian Institute of Science, Bengaluru, INDIA, June 29 - July 01, 2022.

27.  PV Sai Divya, Pavan Kumar Penumakala, Jeevan Jaidi, Thermal Stress Analysis in Direct Chill Casting of Magnesium-alloys, 24th National and 2nd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2017), BITS Pilani, Hyderabad Campus, Hyderabad, INDIA, December 27-30, 2017. (Citations = 1)

26.  Dileep M Paul, Rinu Thomas, Sreesankaran M, Jeevan Jaidi, Jithin P, Experimental Investigation of    the Effect of Wire-coil Inserts on the Performance of a Three-Pass Fin, 24thNational and 2nd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2017), BITS Pilani, Hyderabad Campus, Hyderabad, INDIA, December 27-30, 2017.

25.  Nitin Mythreya Yadlapalli Venkata, Jeevan Jaidi, Model Development and Analysis of Feedwell Flow Dynamics in Thickeners, 24thNational and 2nd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2017), BITS Pilani, Hyderabad Campus, Hyderabad, INDIA, December 27-30, 2017.

24.  Suryadevara Pruthvi, Jeevan Jaidi, Design, Development and Analysis of Airborne Wind Turbine using CFD and FEA Tools, 24thNational and 2nd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2017), BITS Pilani, Hyderabad Campus, Hyderabad, INDIA, December 27-30, 2017.

23.  Alok Deshpande, Jeevan Jaidi, The Numerical Study of Flameless Combustion, 24thNational and 2nd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2017), BITS Pilani, Hyderabad Campus, Hyderabad, INDIA, December 27-30, 2017. (Citations = 1)

22.  Sagar Singhal, Abhishek Gaikwad, Jeevan Jaidi, 2-D CFD Analysis of a Wickless Heat Pipe, 24thNational and 2nd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2017), BITS Pilani, Hyderabad Campus, Hyderabad, INDIA, December 27-30, 2017.

21.  Rinu Thomas, Sreesankaran M, Jeevan Jaidi, Dileep M Paul, Manjunath P, Experimental Evaluation of the Effect of Variable Compression Ratio on Performance and Emission of SI Engine Fuelled with Petrol and n-Butanol Blend at Different Loads, International Conference on Recent Trends in Engineering and Material Sciences, (ICEMS-2016), March 17-19, 2016, Jaipur National University, Jaipur, INDIA. 

20.  Madhavi B, Anvesh Krishna S, Jeevan J, Finite Element Modelling of Friction Stir Welding Process to Study the Thermal Impact and Evolution of Stresses in Aluminium-alloy Plates, AIMTDR-2016, College of Engineering, Pune, INDIA, December 16-18, 2016.

19.  Abhishek Goyal, Jyoti Gautam, Jeevan J, A Computational Fluid Dynamics Study on Stall Controlled Wind Turbines, Global Conference on Renewable Energy (GCRE 2015) Conference, March 4-6, 2016, NIT Patna, Bihar, INDIA. Also, published in Proceedings: GCRE-2016 (ISSN: 2059-2353): pp. 336.

18.  Sreesankaran M Namboothiri, Jeevan Jaidi, Solar Refrigeration and Air Conditioning: A Newfangled Review, Global Conference on Renewable Energy (GCRE 2015) Conference, March 4-6, 2016, NIT Patna, Bihar, INDIA. Also, published in Proceedings: GCRE-2016 (ISSN: 2059-2353): pp. 342.

17.  Dileep M Paul, Manjunath P, Rinu Thomas, Jeevan Jaidi,A Review on Power-To-Gas Energy Storage Technology, Global Conference on Renewable Energy (GCRE 2015) Conference, March 4-6, 2016, NIT Patna, Bihar, INDIA. Also, published in Proceedings: GCRE-2016 (ISSN: 2059-2353): pp. 34.

16.  Manjunath P, Dileep M Paul, Rinu Thomas, Jeevan Jaidi, Incineration: A Comprehensive Review, Global Conference on Renewable Energy (GCRE 2015) Conference, March 4-6, 2016, NIT Patna, Bihar, INDIA. Also, published in Proceedings: GCRE-2016 (ISSN: 2059-2353): pp. 40.

15.  Swati Soni, Praveen K Mishra, Ragamadhuri Nallam, Jeevan Jaidi, Effect of Fin Surface Roughness and Array of Grooves On Heat Transfer Enhancement, 23rd National Heat and Mass Transfer Conference and 1st International ISHMT-ASTFE Heat and Mass Transfer Conference, 17-20 December, 2015, Thiruvananthapuram, INDIA.

14.  Amrita Yelikar, Ragamadhuri Nallam, Jeevan Jaidi, Computational Fluid Dynamics Study and Validation of Rushton Turbine Impeller, 23rd National Heat and Mass Transfer Conference and 1st International ISHMT-ASTFE Heat and Mass Transfer Conference, 17-20 December, 2015, Thiruvananthapuram, INDIA.

13.  Nikhil T, Shreyas M, Jeevan J, Karthik Teja M, Predicted and Measured Thermal Profiles During Friction Stir Welding Process of Aluminium-alloy, International Conference on Advances in Materials and Mechanical Engineering (ICAMME-2015), 8-9 May 2015, E.G.S. Pillay Engineering College, Nagapattinam, Tamilnadu, INDIA.

12.  Aditya Shah, Jeevan Jaidi, A Comparative Study on Heat Transfer Enhancement using Phase-change Material: High gravity conditions vs. internal fins, International Conference on Polygeneration (ICP-2015), February 18-20, 2015, Anna University, Chennai, INDIA.

11.  Jithin P, Dileep M Paul, Rinu Thomas, Manjunath P, Jeevan Jaidi, District Heating: A Technological Review, International Conference on Polygeneration (ICP-2015), Anna University, Chennai, INDIA, February 18-20, 2015.

10.  B Madhavi, J Jeevan, M Karthik Teja, Optimization Study of Friction Stir Welding Process Parameters and Nugget Properties of Aluminium-alloy, International Conference on Structural Integrity (ICONS-2014), IGCAR, Kalpakkam, INDIA, February 4-7, 2014. (Citations = 2)

9.  B Madhavi, J Jeevan, M Karthik Teja, Heat and Material Flow Effects on Microstructures and Hardness in Friction-stir Welded Joints, International Conference on Structural Integrity (ICONS-2014), IGCAR, Kalpakkam, INDIA, February 4-7, 2014.

8.  Jeevan Jaidi, A Low-Reynolds Number Based k-ε Model for Confined Diffusion Flame Reactor, 22nd National and 11th ISHMT-ASME Heat and Mass Transfer Conference, IIT-Kharagpur, INDIA, December 28-31, 2013.

7.  J Jaidi, P Nikhil Babu, A Low-Reynolds Number Based k-e Turbulence Models for Separated Flows: Model validation and assessment, 20th National and 9th ISHMT-ASME Heat and Mass Transfer Conference, IIT-Bombay, INDIA, January 4-6, 2010.

6.  J Jaidi, A Gera, UK Singh, The Heat Effects on Residual Stresses, Microstructures and Mechanical Properties in HAZ of Low-alloy Steel Weldments, Symposium on Joining of Materials (SOJOM), Tiruchi, INDIA, December 11-13, 2008.

5.  J Jaidi,Modeling Two-phase Flows Using Volume-Of-Fluid (VOF) based Interface Tracking Methods, 19th National and 8th ISHMT-ASME Heat and Mass Transfer Conference, JNTU College of Engineering, Hyderabad, INDIA, January 3-5, 2008.

4.   Jaidi, HKDH Bhadeshia, P Dutta, Prediction of Macro-microstructures in Heat-Affected Zone of a Low-alloy Steel Weldment, An International Conference on Advances in Materials and Materials Processing (ICAMMP), IIT- Kharagpur, India, February 3-5, 2006: 523–530.

3.  J Jaidi,P Dutta, 3-D Modeling of Transport Phenomena in GMAW Process, 16th National and 5th ISHMT-ASME Heat and Mass Transfer Conference, Calcutta, INDIA, January 3-5, 2002: 1034–1040.

2.  J Jaidi, KSS Murthy, P Dutta, A k-ε Model for Turbulent Weld Pool Convection in Gas Metal Arc Welding Process, 6th International Conference on Trends in Welding Research, Pine Mountain, Georgia, U.S.A., April 15-19, 2002: 147-152. (Citations = 5)

1.   Jaidi, T Gupta, P Dutta, KSS Murthy, Modeling of Transport Phenomena in MIG Welding Process, Symposium on Joining of Materials (SOJOM), Tiruchi, INDIA, January 20-22, 2000: WM-11.