Feedback

Prof. Amit Kumar Gupta

Professor
Department of Mechanical Engineering

Constrained groove pressing, Manufacturing and Industrial Engineering, Manufacturing simulation modeling, Predictive modeling and optimization of manufacturing processes, Production scheduling, Sheet metal forming, Tensile testing and constitutive modeling
Birla Institute of Technology & Science, Pilani
Hyderabad Campus
Jawahar Nagar, Kapra Mandal
Dist.-Medchal-500 078
Telangana, India

Publications

Category
Published / Accepted
Under Submission/
Under Revision

International Journal Papers

90

2

International Conference Papers

94

National Conference Papers

3

-

 Total 187 2
 
 

 

 
 
LIST OF PUBLICATIONS

 

For updated list, please visit: https://scholar.google.com/citations?user=Cr8bD8EAAAAJ&hl=en

 

Book chapter:

B01. Kotkunde N., Deole A.D., Gupta A.K., Singh S.K., “Numerical Analysis of Warm Deep Drawing for Ti–6Al–4V Alloy”, Advances in Material Forming and Joining, Topics in Mining, Metallurgy and Materials Engineering, Springer, 2015, pp 109-139.

B02. G Mahalle, N Kotkunde, AK Gupta, SK Singh, “Forming and Fracture Limit Diagrams of Inconel 718 Alloy at Elevated Temperatures”, Metal Forming Processes, CRC Press, 2023, pp 151-167.

 

Journal Publications

 

2023

J90.     A Sharma, SSK Vijayaraghavan, AK Gupta, R Sujith (2023), “B4C‐Reinforced Al–Zn Foams Having Superior Energy Absorption Efficiency” Advanced Engineering Materials, Wiley Online Library, Vol. 25 (1), p. 2200810.

J89.     SP Akula, M Ojha, KL Rao, AK Gupta, (2023), “A Review on Superplastic Forming of Ti-6Al-4V and Other Titanium Alloys” Materials Today Communications, Elsevier, p. 105343 (published online).

2022

J88.     M Patil, V Singh, SP Regalla, AK Gupta, TC Bera, S Bade, K Srinivas (2022), “The effect of ultrasonic vibrations on residual stresses and material properties of steel tubes during the cold tube drawing process” Advances in Materials and Processing Technologies, Taylor & Francis, p. 1-21 (published online).

J87.     M Patil, V Singh, SP Regalla, AK Gupta, TC Bera, S Bade, K Srinivas (2022), “Producing high quality cold-drawn steel tubes using an optimal thickness of tin as a tribo-layer” International Journal of Advanced Manufacturing Technology, Springer, Vol. 121 (7), p. 4663-4675.

J86.     A Sharma, SK Srinivasan, VM Dixit, AK Gupta, R Sujith (2022), “Ballistic Performance of Functionally Graded Boron Carbide Reinforced Al – Zn – Mg - Cu Alloy” Journal of Materials Research and Technology, Elsevier, Vol. 18, p. 4042-4059.

J85.     M Patil, V Singh, AK Gupta, SP Regalla, TC Bera, B Simhachalam, K Srinivas (2022), “Tin Layer as a Solid Lubricant for Cold Tube Drawing Processes”, Int. J. of Precision Engineering and Manufacturing-Green Technology, Springer Nature, Vol. 9(2), p. 459-472.

J84.     A Sharma, B Tirumuruhan, GS Muthuvel, AK Gupta, R Sujith (2022), “Optimization of Process Parameters of Boron Carbide-Reinforced Al-Zn-Mg-Cu Matrix Composite Produced by Pressure-Assisted Sintering” Journal of Materials Engineering and Performance, Springer US, Vol. 31(1), p. 328-340.

2021

J83.     A Garudapalli, A Bhardwaj, K Oswal, D Mathur, AK Gupta (2021), “Microstructural, Mechanical, and Superelastic Behavior of Thermo-Mechanically Processed Nitinol Alloy” Shape Memory and Superelasticity, Springer US, Vol. 7(4), p. 503-514.

J82.     G Mahalle, N Kotkunde, AK Gupta, SK Singh (2021), “Efficacy of semi-empirical models for prediction of forming limit curve of IN718 alloy at elevated temperatures”, Advances in Materials and Processing Technologies, Taylor & Francis, Vol. 7(4), p. 617-629.

J81.     G Mahalle, N Kotkunde, AK Gupta, SK Singh (2021), “Comparative assessment of failure strain predictions using ductile damage criteria for warm stretch forming of IN718 alloy”, International Journal of Material Forming, Springer Paris, Vol. 14(5), p. 799-812.

J80.     G Mahalle, N Kotkunde, AK Gupta, SK Singh (2021), “An integrated experimental and finite element approach for wrinkling limit prediction of Inconel 718 alloy at elevated temperatures”, The Journal of Strain Analysis for Engineering Design, SAGE Publications, Pages 03093247211043098.

J79.     A Bhardwaj, M Ojha, A Garudapalli, AK Gupta (2021), “Microstructural, mechanical and strain hardening behaviour of NiTi alloy subjected to constrained groove pressing and ageing treatment”, Journal of Materials Processing Technology, Elsevier, Vol. 294, p.117132.

J78.     CK Sagar, A Priyadarshini, AK Gupta (2021), “Experimental Investigations on The Effect of Tungsten Content on the Machining Behaviour of Tungsten Heavy Alloys”, Defence Science Journal, Vol. 71(2), p. 162-170.

J77.     R Kulkarni, A Krishnan, A Bhardwaj, AK Gupta (2021), “Microstructural behaviour and electrochemical characterization of Nitinol alloy subjected to constrained groove pressing and heat treatment”, Materials Today Communications, Elsevier, Vol. 26, p. 102143.

J76.     G Mahalle, N Kotkunde, AK Gupta, SK Singh (2021), “An improved M–K model coupled with different ductile criteria for fracture limit predictions of Inconel 718 alloy”, Journal of Materials Research and Technology, Elsevier, Vol. 11, p. 1162-1174.

J75.     A Bhardwaj, V Mudaliar, N Gohil, AK Gupta, SSS Kumar (2021), “Evolution of microstructure and mechanical properties of Ti6Al4V alloy by multiple passes of constrained groove pressing at elevated temperature”, Journal of Materials Processing Technology, Elsevier, Vol. 288, p.116891.

J74.     CK Sagar, A Priyadarshini, AK Gupta, T Kumar, S Saxena (2021), “An alternate approach to SHPB tests to compute Johnson-Cook material model constants for 97 WHA at high strain rates and elevated temperatures using machining tests”, Journal of Manufacturing Science and Engineering, ASME, Vol. 143 (2).

J73.     A Bhardwaj, N Gohil, AK Gupta, SSS Kumar (2021), “An experimental investigation on the influence of elevated-temperature constrained groove pressing on the microstructure, mechanical properties and hardening behaviour of Ti6Al4V alloy”, Materials Science and Engineering: A, Elsevier, Vol. 802, p. 140651.

J72.     CK Sagar, A Priyadarshini, AK Gupta, D Mathur (2021), “Experimental investigation of tool wear characteristics and analytical prediction of tool life using a modified tool wear rate model while machining 90 tungsten heavy alloys”, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, SAGE Publications, Vol. 235(1-2), p.242-254.

2020

J71.     G Mahalle, A Morchhale, N Kotkunde, AK Gupta, SK Singh, YC Lin (2020), “Forming and fracture limits of IN718 alloy at elevated temperatures: Experimental and theoretical investigation”, Journal of Manufacturing Processes, Elsevier, Vol. 56, p.482-499.

J70.     G Mahalle, N Kotkunde, AK Gupta, SK Singh (2020), “Efficacy of semi-empirical models for prediction of forming limit curve of IN718 alloy at elevated temperatures”, Advances in Materials and Processing Technologies, Taylor & Francis, p.1-13

J69.     AK Sannidhi, AK Gupta, G Varghese, K Toshniwal, V Sharma (2020), “Analytical and finite element modelling of hydraulic bulge test on extra deep drawing steel with fractography study”, Advances in Materials and Processing Technologies, Taylor & Francis, p.1-17

J68.     G Mahalle, N Kotkunde, AK Gupta, SK Singh (2020), “Prediction of flow stress behaviour by materials modelling technique for Inconel 718 alloy at elevated temperature” Advances in Materials and Processing Technologies, Taylor & Francis, Vol. 6 (2), p.376-383

J67.     MA Wahed, AK Gupta, VSR Gadi, SK Singh, N Kotkunde (2020), “Parameter optimisation in V-bending process at elevated temperatures to minimise spring back in Ti-6Al-4V alloy” Advances in Materials and Processing Technologies, Taylor & Francis, Vol. 6 (2), p. 350-364

2019

J66.     CK Sagar, T Kumar, A Priyadarshini, AK Gupta (2019), “Prediction and optimization of machining forces using oxley's predictive theory and RSM approach during machining of WHAs”, Defence Technology, Vol. 15 (6), p.923-935

J65.     MA Wahed, AK Gupta, V Sharma, K Mahesh, SK Singh, N Kotkunde (2019), “Material characterization, constitutive modelling, and processing map for superplastic deformation region in Ti-6Al-4V alloy”, The International Journal of Advanced Manufacturing Technology, Springer London, Vol. 104 (9-12), p.3419-3438

J64.     A Bhardwaj, AK Gupta, SK Padisala, K Poluri (2019), “Characterization of mechanical and microstructural properties of constrained groove pressed nitinol shape memory alloy for biomedical applications”, Materials Science and Engineering: C, Vol. 102, p.730-742

J63.     G Mahalle, N Kotkunde, AK Gupta, R Sujith, SK Singh, YC Lin (2019), “Microstructure characteristics and comparative analysis of constitutive models for flow stress prediction of Inconel 718 alloy”, Journal of Materials Engineering and Performance, Vol. 28 (6), p.3320-3331

J62.     G Mahalle, O Salunke, N Kotkunde, AK Gupta, SK Singh (2019), “Neural network modeling for anisotropic mechanical properties and work hardening behavior of Inconel 718 alloy at elevated temperatures”, Journal of Materials Research and Technology, Vol. 8 (2), p.2130-2140

J61.     Bhardwaj A., Gupta A.K., Padisala S.K., Poluri K. (2019), “Characterization of mechanical and microstructural properties of constrained groove pressed nitinol shape memory alloy for biomedical applications”, Materials Science & Engineering C, Vol. 102, p. 730–742

J60.     Satya Suresh V.V.N., Regalla S.P., Gupta A.K. (2019), “Minimization of weld line movement in heat-assisted forming of tailor welded blanks”, Journal of Mechanical Engineering Science (iMechE Part C), SAGE Publications, Vol. 233(11), p. 3760–3768

2018

J59.     Sharma V., Namburu S.A.S., Lalwani P., Sagar C.K., Gupta A.K. (2018), “Constitutive modelling and processing map analysis of tungsten heavy alloy (92.5 W-5.25Ni-2.25Fe) at elevated temperatures”, International Journal of Refractory Metals and Hard Materials, Vol. 76, p.168-179

J58.     Satya Suresh V.V.N., Regalla S.P., Gupta A.K. (2018), “Optimum parameters to minimize weld line movement in the warm forming of tailor-welded blanks”, Journal of the Brazilian Society of Mechanical Sciences and Engineering, Vol. 40 (4)

2017

J57.     Satya Suresh, V.V.N., Regalla, S.P. & Gupta, A.K. (2017), “Influence of geometric parameters on weld line movement in the selective heating of tailor welded blanks”, Advances in Materials and Processing Technologies, Taylor & Francis, Vol. 3 (3), p.385-392

J56.     Athale M., Gupta A.K., Singh S.K., Vaidyanathan A. (2017), “Analytical and finite element simulation studies on earing profile of Ti-6Al-4V deep drawn cups at elevated temperatures”, International Journal of Material Forming, Springer-Verlag France, Vol. 11 (4), p.479-490

2016

J55.     Suresh V.V.N.S., Regalla S.P., Gupta A.K. (2016), “Combined effect of thickness ratio and selective heating on weld line movement in stamped tailor-welded blanks”, Materials and Manufacturing Processes, Taylor and Francis Inc., Vol. 32 (12), p.1363-1367

J54.     Prasad K.S., Gupta A.K., Singh Y., Singh S.K. (2016), “A Modified Mechanical Threshold Stress Constitutive Model for Austenitic Stainless Steels”, Journal of Materials Engineering and Performance, Springer New York LLC, Vol. 25 (12), p.5411-5423

J53.     Gupta A.K., Maddukuri T.S., Singh S.K. (2016), “Constrained groove pressing for sheet metal processing”, Progress in Materials Science, Elsevier Ltd, Vol. 84 , p.403-462

J52.     Hussaini S.M., Krishna G., Gupta A.K., Singh S.K. (2016), “Development of experimental and theoretical forming limit diagrams for warm forming of austenitic stainless steel 316”, Journal of Manufacturing Processes, Elsevier Ltd, Vol. 18 , p.151-158

J51.     Kotkunde N., Gupta A.K., Singh S.K. (2016), “Formability study of Ti-6Al-4V alloy under warm conditions”, Advances in Materials and Processing Technologies, Taylor & Francis, Vol. 1 (1-2), p.210-222

2015

J50.     Kotkunde N., Krishna G., Shenoy S.K., Gupta A.K., Singh S.K. (2015), “Experimental and theoretical investigation of forming limit diagram for Ti-6Al-4 V alloy at warm condition”, International Journal of Material Forming, Springer-Verlag France, Vol. 10, p. 255-266

J49.     Desu R.K., Singh S.K., Gupta A.K. (2015), “Comparative study of warm and hydromechanical deep drawing for low-carbon steel”, The International Journal of Advanced Manufacturing Technology, Springer, Vol. 85 (1-4), p.661-672

J48.     Kotkunde N., Srinivasan S., Krishna G., Gupta A.K., Singh S.K. (2015), “Influence of material models on theoretical forming limit diagram prediction for Ti–6Al–4V alloy under warm condition”, Transactions of Nonferrous Metals Society of China (English Edition), Nonferrous Metals Society of China, Vol. 26 (3), p.736-746

J47.     Kotkunde N., Deole A.D., Gupta A.K., Singh S.K. (2015), “Numerical Analysis of Warm Deep Drawing for Ti–6Al–4V Alloy”, Advances in Material Forming and Joining, Springer, p.109-139

J46.     Desu R.K., Nitin Krishnamurthy H., Balu A., Gupta A.K., Singh S.K. (2015), “Mechanical properties of Austenitic Stainless Steel 304L and 316L at elevated temperatures”, Journal of Materials Research and Technology, Elsevier Editora Ltda, Vol. 5 (1), p.13-20

J45.     Kurra S., Hifzur Rahman N., Regalla S.P., Gupta A.K. (2015), “Modeling and optimization of surface roughness in single point incremental forming process”, Journal of Materials Research and Technology, Elsevier Editora Ltda, Vol. 4 (3), p.304-313

2014

J44.     Lade J., Banoth B.N. Gupta A.K., Singh S.K. (2014), “Metallurgical Studies of Austenitic Stainless Steel 304 under Warm Deep Drawing”, Journal of Iron and Steel Research, International, Elsevier, Vol. 21 (12), p.1147-1151

J43.     Kurra S., Nasih H.R., Regalla S., Gupta A.K. (2014), “Parametric study and multi-objective optimization in single-point incremental forming of extra deep drawing steel sheets”, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, SAGE Publications Ltd, Vol. 230 (5), p.825-837

J42.     Uppada S.R., Balu A., Gupta A.K., Dutta J.R. (2014), “Hybrid neural network based optimization of process parameters and application of taguchi method for lipase production from co-culture of Lactobacillus brevisand Lactobacillus plantarum”, International Journal of PharmTech Research, Sphinx Knowledge House, Vol. 6 (7), p.2074-2082

J41.     Gupta A.K., Guntuku S.C., Desu R.K., Balu A. (2014), “Optimisation of turning parameters by integrating genetic algorithm with support vector regression and artificial neural networks”, International Journal of Advanced Manufacturing Technology, Springer-Verlag London Ltd, Vol. 77 (42739), p.331-339

J40.     Uppada S.R., Balu A., Gupta A.K., Dutta J.R. (2014), “Modeling Lipase Production From Co-cultures of Lactic Acid Bacteria Using Neural Networks and Support Vector Machine with Genetic Algorithm Optimization”, International Journal of Emerging Technologies in Computational and Applied Sciences, Vol. 9 (1), p.38-43

J39.     Gupta A.K., Krishnamurthy H.N., Puranik P., Singh S.K., Balu A. (2014), “An exponential strain dependent Rusinek-Klepaczko model for flow stress prediction in austenitic stainless steel 304 at elevated temperatures”, Journal of Materials Research and Technology, Elsevier Editora Ltda, Vol. 3, p. 370-377

J38.     Kotkunde, N., Balu, A., Gupta, A.K., and Singh, S.K. (2014), “Flow stress prediction of Ti-6Al-4V alloy at elevated temperature using artificial neural network”, Journal of Applied Mechanics and Materials, Trans Tech Publications, Vol. 612 , p.83-88

J37.     Kotkunde, N., Deole A.D., and Gupta, A.K. (2014), “Prediction of Forming Limit Diagram for Ti-6Al-4V Alloy Using Artificial Neural Network”, Procedia Materials Science, Elsevier, Vol. 6 , p.341-346

J36.     Prasad, K.S. and Gupta, A.K. (2014), “A Constitutive Description to Predict High-temperature Flow Stress in Austenitic Stainless Steel 316”, Procedia Materials Science, Elsevier, Vol. 6 , p.347-353

J35.     Hussaini, S.M., Gupta, A.K. and Singh, S.K. (2014), “Investigation of Material Model for Simulations of Deep Drawing in Dynamic Strain Aging Region”, Procedia Materials Science, Elsevier, Vol. 6 , p.1157-1160

J34.     Raghuram K.D., Sharath Chandra, G., Balu, A. and Gupta, A.K. (2014), “Support Vector Regression based Flow Stress Prediction in Austenitic Stainless Steel 304”, Procedia Materials Science, Elsevier, Vol. 6 , p.368-375

J33.     Kotkunde N., Deole A.D., Gupta A.K., Singh S.K. (2014), “Experimental and numerical investigation of anisotropic yield criteria for warm deep drawing of Ti-6Al-4V alloy”, Materials and Design, Elsevier Ltd, Vol. 63 , p.336-344

J32.     Kotkunde, N., Deole A.D., Gupta, A.K., and Singh, S.K. (2014), “Analysis of Thickness Strain Prediction in Warm Deep Drawing of Ti-6Al-4V”, Journal of Applied Mechanics and Materials, Trans Tech Publications, Vol. 980 , p.52-56

J31.     Kotkunde N., Deole A.D., Gupta A.K., Singh S.K., Aditya B. (2014), “Failure and formability studies in warm deep drawing of Ti-6Al-4V alloy”, Materials and Design, Elsevier Ltd, Vol. 60 , p.540-547

J30.     Garg A., Tai K., Gupta A.K. (2014), “A modified multi-gene genetic programming approach for modelling true stress of dynamic strain aging regime of austenitic stainless steel 304”, Meccanica, Kluwer Academic Publishers, Vol. 49 (5), p.1193-1209

2013

J29.     Singh S.K., Kumar V., Prudvi Reddy P., Gupta A.K. (2013), “Finite element simulation of ironing process under warm conditions”, Journal of Materials Research and Technology, Elsevier Editora Ltda, Vol. 3 (1), p.71-78

J28.     Hussaini S.M., Singh S.K., Gupta A.K. (2013), “Experimental and numerical investigation of formability for austenitic stainless steel 316 at elevated temperatures”, Journal of Materials Research and Technology, Elsevier Editora Ltda, Vol. 3 (1), p. 17-24

J27.     Singh, S.K. & Gupta, A.K. (2013), “Comparison of ironing in warm and hydro-mechanical deep drawing of low carbon steel”, Advances in Materials and Processing Technologies XV, Scientific Net, Vol. 0 , p.203-210

J26.     Kotkunde N., Deole A.D., Gupta A.K., Singh S.K. (2013), “Comparative study of constitutive modeling for Ti-6Al-4V alloy at low strain rates and elevated temperatures”, Materials and Design, Elsevier Ltd, Vol. 55 , p.999-1005

J25.     Hussaini S.M., Singh S.K., Gupta A.K. (2013), “Formability of austenitic stainless steel 316 sheet in dynamic strain aging regime”, Acta Metallurgica Slovaca, 0, Vol. 20 (1), p.71-81

J24.     Kotkunde N., Krishnamurthy H.N., Puranik P., Gupta A.K., Singh S.K. (2013), “Microstructure study and constitutive modeling of Ti-6Al-4V alloy at elevated temperatures”, Materials and Design, Elsevier Ltd, Vol. 54 , p.96-103

J23.     Hussaini, S.M., Singh, S.K. & Gupta, A.K. (2013), “Experimental investigation of dynamic strain aging regime in Austenitic Stainless Steel 316”, International Journal of Engineering Research & Technology, ESRSA Publications Pvt Ltd, Vol. 2 (8), p.1691-1694

J22.     Hussaini S.M., Singh S.K., Gupta A.K. (2013), “Formability and fracture studies of austenitic stainless steel 316 at different temperatures”, Journal of King Saud University - Engineering Sciences, King Saud University, Vol. 26 (2), p.184-190

J20.     Jayahari, L., Sasidhar, P.V., Prudvi Reddy, P., BaluNaik, P., Gupta, A.K. and Singh, S.K. (2013), “Formability studies of ASS 304 and evaluation of friction for Al in deep drawing setup at elevated temperatures using LS-DYNA”, Journal of King Saud University - Engineering Sciences, Elsevier, Vol. 26 , p.21-31

J19.     Gupta A.K., Krishnamurthy H.N., Singh Y., Prasad K.M., Singh S.K. (2013), “Development of constitutive models for dynamic strain aging regime in Austenitic stainless steel 304”, Materials and Design, Elsevier, Vol. 45, p.616-627

2012

J18.     Gupta A.K., Anirudh V.K., Singh S.K. (2012), “Constitutive models to predict flow stress in Austenitic Stainless Steel 316 at elevated temperatures”, Materials and Design, Elsevier, Vol. 43 , p.410-418

J17.     Gupta A.K., Singh S.K., Reddy S., Hariharan G. (2012), “Prediction of flow stress in dynamic strain aging regime of austenitic stainless steel 316 using artificial neural network”, Materials and Design, Elsevier, Vol. 35, p.589-595

J16.     Kotkunde, N., Krishnamurthy, H.N., Gupta, A.K. & Singh, S.K. (2012), “Development of modified Arrhenius model for Ti-6Al-4V alloy to predict the flow stress”, International Journal of Advanced Materials Manufacturing & Characterization, Publishing India Group, Vol. 3 (1), p.83-88

J15.     Uppada S.R., Gupta A.K., Dutta J.R. (2012), “Statistical optimization of culture parameters for lipase production from Lactococcus lactis and its application in detergent industry”, International Journal of ChemTech Research, 0, Vol. 4 (4), p.1509-1517

2011

J14.     Gupta A.K., Sivakumar A.I., Lendermann P. (2011), “Cycle time simulation study for cluster tool operation in IC fabrication”, International Journal of Manufacturing Technology and Management, Inderscience Publishers, Vol. 23(3-4), p.179-192

2010

J13.     Singh, S.K., Mahesh, K and Gupta, A.K. (2010), “Prediction of mechanical properties of extra deep drawn steel in blue brittle region using Artificial Neural Network”, Materials & Design, Elsevier, Vol. 31 (5), p.1980-2015

J12.     Gupta A.K. (2010), “Predictive modelling of turning operations using response surface methodology, artificial neural networks and support vector regression”, International Journal of Production Research, Taylor & Francis, Vol. 48 (3), p.763-778

J11.     Singh, S.K., Gupta, A.K. and Mahesh K. (2010), “A study on the extent of ironing of EDD steel at elevated temperature”, CIRP Journal of Manufacturing Science and Technology, Elsevier, Vol. 3 (1), p.73-79

J10.     Singh S.K., Gupta A.K. (2010), “Application of support vector regression in predicting thickness strains in hydro-mechanical deep drawing and comparison with ANN and FEM”, CIRP Journal of Manufacturing Science and Technology, 0, Vol. 3 (1), p.66-72

2009

J09.     Gupta A.K., Ganesan, V.K. and Sivakumar, A.I. (2009), “Cycle time variance minimization in dynamic scheduling of single machine systems”, The International Journal of Advanced Manufacturing Technology, Springer London, Vol. 42(5), p.544-552.

2007

J08.     Gupta, A.K., Sivakumar, A.I. (2007), “Controlling delivery performance in semiconductor manufacturing using Look Ahead Batching”, International Journal of Production Research, Taylor & Francis, Vol. 45 (3), p.591-613.

J07.     Gan, B.P., Liow, L.F., Gupta, A.K., Lendermann, P., Turner, S.J. and Wang, X. (2007), “Analysis of a borderless fab using interoperating AutoSched AP models”, International Journal of Production Research, Taylor & Francis, Vol. 45 (3), p.675-697

2006

J06.     Gupta, A.K., Sivakumar, A.I. (2006), “Optimization of due date objectives in scheduling semiconductor batch manufacturing”, International Journal of Machine Tools and Manufacture, Elsevier Sciece, Vol. 46 (12-13), p.1671-1679

J05.     Sivakumar, A.I., Gupta, A.K. (2006), “On-line multiobjective Pareto optimal dynamic scheduling of semiconductor back-end using conjunctive simulated scheduling”, IEEE Transactions on Electronics Packaging Manufacturing, IEEE, Vol. 29 (2), p.99-109

J04.     Gupta, A.K. and Sivakumar, A.I. (2006), “Job shop scheduling techniques in semiconductor manufacturing”, International Journal of Advanced Manufacturing Technology, Springer-Verlag London Ltd, Vol. 27 (11-12), p.1163-1169

2005

J03.     Gupta, A.K. and Sivakumar, A.I. (2004), “Conjunctive simulated scheduling”, International Journal of Advanced Manufacturing Technology, Springer-Verlag London Ltd, Vol. 26 (11-12), p.1409-1413

J02.     Gupta, A.K. and Sivakumar, A.I. (2004), “Single machine scheduling with multiple objectives in semiconductor manufacturing”, International Journal of Advanced Manufacturing Technology, Springer-Verlag London Ltd, Vol. 26 (9-10), p.950-958

J01.     Gupta, A.K. and Sivakumar, A.I. (2004), “Multi-objective scheduling of two-job families on a single machine”, OMEGA: The International Journal of Management Science, Elsevier Science, Vol. 33 (5), p.399-405

 

Publications in International Conferences:

 

2022

IC94.  KL Rao, AK Gupta, D Mathur, A Bhardwaj, (2022), “Experimental Investigation on Severe Plastic Deformation of AA7075 Alloy at Elevated Temperature” ASME International Mechanical Engineering Congress and Exposition

IC93.  A Bhardwaj, D Mathur, K Oswal, AK Gupta, (2022), “Microstructure Evolution and R-Phase Transformation in NiTi Shape Memory Alloy Processed by Constrained Groove Pressing and Ageing Treatment” ASME International Mechanical Engineering Congress and Exposition

IC92.  G Mahalle, P Takalkar, N Kotkunde, AK Gupta, SK Singh, (2022), “Strain and Stress-Based Forming Limit Diagrams for Inconel 718 Alloy” NUMISHEET 2022, Springer, pages 549-556.

2021

IC91.  A Sharma, AS Pratyush, AK Gupta, R Sujith, (2021), “Effect of Heat Treatment on Microstructure and Hardness of Graphene Nanoplatelets Reinforced Al-Zn-Mg-Cu Alloy Composite” ASME International Mechanical Engineering Congress and Exposition

IC90.  A Bhardwaj, N Gohil, A Sharma, KL Rao, AK Gupta, SS Satheesh Kumar (2021), “EBSD Investigation of Ti6Al4V Alloy Processed by Constrained Groove Pressing and Heat Treatment” ASME International Mechanical Engineering Congress and Exposition

IC89.  G Mahalle, N Kotkunde, AK Gupta, SK Singh, CP Nikhare (2021), “Prediction of Hot Deformation Behaviors Under Multiaxial Loading Using Gurson-Tvergaard-Needleman Damage Model for Inconel 718 Alloy Thin Sheet”, ASME International Mechanical Engineering Congress and Exposition

2020

IC88.  G Mahalle, O Salunke, N Kotkunde, AK Gupta, SK Singh, “Study of Khan-Huang-Liang (KHL) Anisotropic Deformation Model for Deep Drawing Behaviour of Inconel 718 Alloy”, IOP Conference Series: Materials Science and Engineering 967 (1), 012054.

IC87.  P Mahesh, SP Regalla, AK Gupta, TC Bera, B Simhachalam, K Srinivasa (2020), “Parametric optimization of the generation of the porous layer for lubrication in tube drawing process”, Materials Today: Proceedings

IC86.  CK Sagar, A Priyadarshini, AK Gupta (2020), “Effect of Johnson–Cook Material Model Constants on Predicted Chip Morphology and Forces in FE Simulations of Machining Operation for 93% WHA Alloy’, Advances in Simulation, Product Design and Development, p.227-239

2019

IC85.  G Mahalle, O Salunke, N Kotkunde, AK Gupta, SK Singh (2019), “Anisotropic Yielding Behaviour of Inconel 718 Alloy at Elevated Temperatures”, ASME International Mechanical Engineering Congress and Exposition

IC84.  A Sharma, A Priyadarshini, R Sujith, MVS Subrahmanyam, PA Thomas, AK Gupta (2019), “Effect of Graphene Nanoplatelets Incorporation on Microstructural and Tribological Properties of Aluminium Metal Matrix Composites” ASME International Mechanical Engineering Congress and Exposition

IC83.  C Kiran Sagar, A Priyadarshini, AK Gupta (2019), “Optimization of Machining Parameters During Turning of Tungsten Heavy Alloys Using Taguchi Analysis’ ASME International Mechanical Engineering Congress and Exposition

IC82.  M Ojha, PK Penumakala, GV Marrivada, PK Chaganti, AK Gupta (2019), “Processing Of Glass Fiber Pultruded Composites Using Graphene Nanoplatelets Modified Epoxy Matrix” Materials Today: Proceedings, Vol. 18, p.3298-3304

IC81.  MA Wahed, VSR Gadi, AK Gupta, K Supradeepan, SK Singh (2019), “Finite element analysis of spring back in Ti-6Al-4V alloy”, Materials Today: Proceedings, Vol. 18, p.2693-2699

IC80.  G Mahalle, N Kotkunde, AK Gupta, SK Singh (2019), “Cowper-Symonds Strain Hardening Model for Flow Behaviour Of Inconel 718 Alloy”, Materials Today: Proceedings, Vol. 18, p.2796-2801

IC79.  A Sharma, B Vasudevan, R Sujith, N Kotkunde, K Suresh, AK Gupta (2019), “Effect of Graphene Nanoplatelets on the Mechanical Properties of Aluminium Metal Matrix Composite”, Materials Today: Proceedings, Vol. 18, p.2461-2467

IC78.  G Mahalle, N Kotkunde, AK Gupta, SK Singh, (2019) “Analysis of Hot Workability of Inconel Alloys Using Processing Maps”, Advances in Computational Methods in Manufacturing, p.109-118

2018

IC77.  Chithajalu K.S., Priyadarshini A., Gupta A.K., Shukla S.K., “Determination of Johnson Cook Material Model Constants and Their Influence on Machining Simulations of Tungsten Heavy Alloy”, ASME 2018 International Mechanical Engineering Congress and Exposition, American Society of Mechanical Engineers.

IC76.  Wahed M.A., Gupta A.K., Kotkunde N., Singh S.K., “Development of Processing Map for Superplastic Deformation of Ti-6Al-4V Alloy”, ASME 2018 International Mechanical Engineering Congress and Exposition, American Society of Mechanical Engineers.

IC75.  Padisala  S.K., Bhardwaj A., Poluri K., Gupta A.K., “Effect of Constrained Groove Pressing on Mechanical Properties of Nitinol Alloy”, ASME 2018 International Mechanical Engineering Congress and Exposition, American Society of Mechanical Engineers.

IC74.  Mahalle G., Kotkunde N., Shah R., Gupta A.K., Singh S.K. (2018), “Analysis of Flow Stress Behaviour of Inconel Alloys at Elevated Temperatures Using Constitutive Model”, Journal of Physics: Conference Series, Vol 1063(1)

IC73.  Wahed M.A., Gupta A.K., Singh S.K., Kotkunde N., “Effect of anisotropy on mechanical properties of Ti-6Al-4V in superplastic region”, IOP Conference Series: Materials Science and Engineering, Vol 346(1)

IC72.  Kotkunde N., Krishnamurthy H.N., Gupta A.K., Singh S.K., “Study of Hot Deformation Behavior Using Phenomenological Based Constitutive Model for Austenitic Stainless Steel 316”, ICMPC 2017, Materials Today: Proceedings, Vol 5(2), p. 4870-4877

2017

IC71.  Kotkunde N., Balu A., Gupta A.K., Singh S.K., “Development of Predictive Models for Formability Study of Ti-6Al-4V alloy at Elevated Temperatures”, 5th International Conference of Materials Processing and Characterization (ICMPC 2016), Materials Today: Proceedings, Vol 4(2), p. 937-945

IC70.  Kotkunde N., Gupta A.K., Paresi P.R., Singh S.K., “Experimental and Finite Element Studies of Stretch Forming Process for Ti-6Al-4V Alloy at Elevated Temperature”, 6th International Conference of Materials Processing and Characterization (ICMPC 2016), Materials Today: Proceedings, Vol 4(4), p. 5266-5273

IC69.  Limbadri K., Krishnamurthy H.N., Maruthi Ram A., Saibaba N., Kutumba Rao V.V., Murthy J.N., Gupta A.K., Singh S.K., “Development of Johnson Cook Model for Zircaloy-4 with Low Oxygen Content”, 5th International Conference of Materials Processing and Characterization (ICMPC 2016) , Materials Today: Proceedings, Vol 4(2), p. 966-974

IC68.  Pratoori R., Maddukuri T.S., Sannidhi A.K., Singh Y.P., Gundepudi B., Gupta A.K. “Tensile Testing of Ultra-Fine Grained Extra Deep Drawing Steel Sheets”, 5th International Conference of Materials Processing and Characterization (ICMPC 2016), Materials Today: Proceedings, Vol 4(2), p. 590-595

IC67.  Singh S.K., Pratoori R., Paresi P.R., Kotkunde N., Gupta A.K., “Experimental and Finite Element Studies of Redrawing for ASS 316 at Elevated Temperatures”, 6th International Conference of Materials Processing and Characterization (ICMPC 2016), Materials Today: Proceedings, Vol 4(4), p. 5274-5281

IC66.  Toshniwal K., Pareddy S., Kotkunde N., Gupta A.K. “Numerical Investigation on Stress based Forming Limit Diagram for Ti-6Al-4V Alloy”, ICAAMM-2016, Materials Today: Proceedings, Vol 4(8), p. 8096-8103

2016:

IC65.  Gupta A.K., Deole A., Kotkunde N., Singh S.K., Jella G. “Analysis of earing behaviour in deep drawing of ASS 304 at elevated temperature”, Journal of Physics: Conference Series, Vol 743(3)

IC64.  Nitin Kotkunde, Aditya Balu, Amit Kumar Gupta, Swadesh Kumar Sing, “Development of Predictive Models for Formability Study of Ti-6Al-4V alloy at Elevated Temperatures”, 5th International Conference of Materials Processing and Characterization (ICMPC), GRIET-Hyderabad, March 2016.

IC63.  Chadaram Srinivasu, Swadesh Kumar Singh, Gangadhar Jella, Lade Jayahari, Nitin Kotkunde and Amit Kumar Gupta “Study of Limiting Dome Height and Temperature Distribution in Warm Forming of ASS304 Using Finite Element Analysis”, 5th International Conference of Materials Processing and Characterization, (ICMPC), GRIET-Hyderabad, March 2016.     

IC62.  Kotkunde, N., Krishna, G., Gupta, A.K. and Singh, S.K., “Investigations of Marciniak Kuczynski (M-K) theoretical model for forming limit curve prediction of Ti6Al4V alloy”, Proceedings of ISET2016 International Conference on Energy Systems and Developments (ICESD-2016), February 19-20, 2016, Pune, Maharashtra, India

IC61. Satya Suresh V.V.N, Srinivas Prakash Regalla, Amit Kumar Gupta, Padmanabham G (2015) “Weld line shift in the case of Tailor welded blanks subjected to differential strengths with respect to TIG and Laser welding”, 4th International Conference on Materials Processing and Characterization,  Materials Today Proceedings, 2, pp 3501-3510 (Elsevier)

2015:

IC60. Hussaini S.M., Gupta A.K., Singh S.K. (2015), “Formability Studies of ASS 316 Under Different Forming Conditions”, Materials Today: Proceedings, Vol. 2 (4-5), p.1987-1995

IC59. Jayahari L, Balunaik B, Gupta A.K., Singh S.K. (2015), “Finite Element Simulation Studies of AISI 304 for Deep Drawing at Various Temperatures”, Materials Today: Proceedings, Vol. 2 (4-5), p.1978-1986

IC58. Gangadhar J, Reddy KSK, Goud RR, Varma P, Prasad KE, Varghese G, Gupta A.K., Singh S.K. (2015), “Finite Element Simulation of Direct Redrawing Process of EDD Steel at Elevated Temperatures”, Materials Today: Proceedings, Vol. 2 (4-5), p.1968-1977

IC57. Srinivasu C,  Vishnu,  Limbadri, Prasad KE, Goud RR, Varghese G, Gupta A.K., Singh S.K. (2015), “Finite Element Simulation of Stretching Operation of EDD Steel at Different Temperatures”, Materials Today: Proceedings, Vol. 2 (4–5), p.1959-1967

IC56. Kanumuri L,Srishuka M, Gupta A.K., Singh S.K. (2015), “Application of Support Vector Regression on Mechanical Properties of Austenitic Stainless Steel 304 at Elevated Temperatures”, Materials Today: Proceedings, Vol. 2 (4-5), p.1479-1486

IC55. Kotkunde, N., Madhava P.T., Abhijeet A. and Gupta, A.K., (2015), “Experimental and numerical study of formability for EDD steel”, 4th  International Conference on Materials Processing and Characterization (ICMPC 2015), Mar 14-15, 2014.

IC54. Kotkunde, N. and Gupta, A.K., (2015), “Analysis of Forming Limit Diagram for Ti-6Al-4V Alloy”, 4th  International Conference on Materials Processing and Characterization (ICMPC 2015), Mar 14-15, 2014.

IC53. Satya Suresh V.V.N., Regalla S.P., Gupta, A.K. and Padmanabhan, G., (2015), “Weld line shift in the case of Tailor welded blanks subjected to differential strengths with respect to TIG and Laser welding”, 4th  International Conference on Materials Processing and Characterization (ICMPC 2015), Mar 14-15, 2014.

2014:

IC52. Kotkunde, N., Rane S, Gupta, A.K., and Singh, S.K  (2014), “Analysis of Warm Deep Drawing For Ti-6Al-4V Alloy”, 5th International & 26th All India Manufacturing Technology, Design and Research Conference (AIMTDR 2014), IIT Guwahati,  Dec 12-14, 2014.

IC51. Chirag I Sancheti., Aditya, B. and Gupta, A.K. (2014), “Improvement of production by assembly line simulations using FlexSim”, International Conference on Advance Design and Manufacturing (ICADM 2014), Dec 05-07, 2014.

IC50. Eswar P..K, Raman G. R., Singh, S.K. and Gupta, A.K., (2014) " Some Investigations of Stretching operation of EDD Steel at elevated Temperatures using FEM", International conference on Computer Science and Information Systems (ICSIS’2014), Dubai, UAE, Oct 17-18, 2014

IC49.  Sajun P. K. and Gupta, A.K.(2014), “A Constitutive Description to Predict High-temperature Flow Stress in Austenitic Stainless Steel 316”,3rd International Conference on Materials Processing and Characterization (ICMPC 2014), Mar 08-09, 2014.

IC48. Hussaini, S.M., Gupta, A.K. and Singh, S.K. (2014), “Investigation of Material Model for Simulations of Deep Drawing in Dynamic Strain Aging Region”,3rd International Conference on Materials Processing and Characterization (ICMPC 2014), Mar 08-09, 2014.

IC47. Raghuram K.D., Aditya, B., Gupta, A.K. and Singh, S.K. (2014), “Mechanical Properties of Austenitic Stainless Steel 316 at Elevated Temperatures”, International Conference on Structural Integrity (ICONS-2014), IGCAR, Kalpakkam, India, Feb 04-07, 2014

IC46. Kotkunde, N., Aditya, B., Gupta, A.K., and Singh, S.K. (2014), “Flow stress prediction of Ti-6Al-4V alloy at elevated temperature using artificial neural network”, International Symposium on Engineering and Technology, Pune.

IC45.  Jayahari, L., Gupta, A.K.,BaluNaik, B., and Singh, S.K. (2014), "Formability analysis of Austenitic stainless steel-304 under warm conditions”,  9th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Process, Jan 6-10, Deakin University, Melbourne, Australia, AIP Proceedings, pp 402-405.

IC44. Kotkunde, N., Deole, A.D., Gupta, A.K., and Singh, S.K. (2014), “Effect of process parameters on deep drawing of Ti-6Al-4V alloy using finite element analysis”, 9th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Process, Jan 6-10, Deakin University, Melbourne, Australia, pp.1065-68. (AIP Conference Proceedings 1567, 1065 (2013); DOI: 10.1063/1.4850155)

IC43. Sajun P. K, Raghuram K.D., Jayahari, L., Gupta, A.K., and Singh, S.K. (2014), “Finite element modeling and prediction of thickness strains of deep drawing using ANN and LS-Dyna for ASS304”, 9th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Process, Jan 6-10, Deakin University, Melbourne, Australia, pp.1065-68. (AIP Conference Proceedings 1567, 402 (2013); DOI: 10.1063/1.4850000)

2013:

IC42. Kotkunde, N., Deole, A.D., Gupta, A.K., and Singh, S.K. (2013), “Development of constitutive models for Ti–6Al–4V alloy over wide ranges of low strain rates and temperatures”, 8th COPEN 2013, NIT Calicut.

IC41. Kotkunde, N., Deole, A.D., Gupta, A.K., and Singh, S.K. (2013), “A comparative study on modified Johnson-Cook and Fields–Baclofen constitutive models to predict flow behavior of Ti-6Al-4V alloy sheet at elevated temperature” International Conference on Computer Aided Engineering (CAE-2013), IIT Madras.

IC40. Aditya, B., Sharath Chandra G. and Gupta, A.K. (2013), “Multi-objective optimization of turning operations using non-dominated sorting genetic algorithm enhanced with neural network”, International Conference on Advanced Engineering Optimization Through Intelligent Techniques (AEOTIT), Surat, Gujarat, India, July 01-03, 2013, pp 106-110.

IC39. Hansoge, N.K., Singh, Y., Gupta, A.K. and Singh, S.K. (2013), “Prediction of deformation behavior of austenitic stainless steel 304 in dynamic strain aging regime”, International Conference on Materials Processing and Characterization (ICMPC), Hyderabad, March 17-18, 2013.

IC38. Kotkunde, N., Gupta, A.K., Hansoge, N.K., Puranik, P. and Singh, S.K. (2013), “Development of modified Arrhenius model for Ti-6Al-4V alloy to predict flow stress” International Conference on Materials Processing and Characterization (ICMPC), Hyderabad, March 17-18, 2013.

IC37. Kotkunde, N., Gupta, A.K., Hansoge, N.K., Puranik, P. and Singh, S.K. (2013), “Study of flow stress analysis for Ti-6Al-4V alloy using modified Zerilli-Armstrong model”, International Conference on Advances in Materials Processing and Characterization (AMPC), Chennai, February 6-8, 2013, pp 933-939.

IC36. Hansoge, N.K., Singh, Y., Gupta, A.K. and Singh, S.K. (2013), “Flow stress prediction of austenitic stainless steel 304 in dynamic strain aging regime using Arrhenius type equation”, International Conference on Advances in Materials Processing and Characterization (AMPC), Chennai, February 6-8, 2013, pp. 651-659.

2012:

IC35. Singh, S.K., Kranthi Raj, M.L., Bandhavi, B. and Gupta, A.K. (2012), “Characterization and formability of commercially pure titanium at elevated temperature using finite element method”, 4th International and 25th AIMTDR, JadavpurUnivesity, Kolkata, December 14-16, 2012, pp 168-173.

IC34. Hussaini, S.M., Gupta, A.K. and Singh, S.K. (2012), “Determination of the limiting drawing ratio in deep drawing process at different temperatures for austenitic stainless steel,” 4th International and 25th AIMTDR, JadavpurUnivesity, Kolkata, December 14-16, 2012, pp 64-67.

IC33. Kotkunde, N., Gupta, A.K., Hansoge, N.K., Puranik, P. and Singh, S.K. (2012), “Flow stress prediction of Ti-6Al-4V using modified Johnson Cook model”, 3rd Asian Conference on Mechanics of Functional Materials and Structures (ACMFMS), Delhi, December 5-8, 2012, pp 709-802.

IC32. Singh, Y., Hansoge, N.K., Gupta, A.K. and Singh, S.K. (2012), “A comparative study of constitutive models to predict flow stress behaviour in dynamic strain aging regime of austenitic stainless steel 316”, 2nd International Conference on Materials Science, Metal & Manufacturing (M3 2012), Singapore, November 19-20, 2012, pp 98-106.

IC31. Jayahari, L., BaluNaik, B., Gupta, A.K. and Singh, S.K. (2012), “Study of microhardness of deep drawn cups for austenitic stainless steel-304 under warm conditions”, 11th International Conference on High Nitrogen Steels and Interstitial Alloys, Chennai, September 27-29, 2012.

IC30. Sharath Chandra G, Raghuram K.D., Gupta, A.K. and Singh, S.K., (2012) "Predicting flow stress in dynamic strain aging regime of ASS 304 using support vector regression", 11th International Conference on High Nitrogen Steels and Interstitial Alloys, Chennai, September 27-29, 2012.

IC29. Singh, S.K., Sasidhar, V., Kumar, V., Reddy, P. and Gupta, A.K. (2012), “Comparison of warm and hydromechanical deep drawing when low carbon steel is subjected to ironing”, 15th International Conference on Advances in Materials & Processing Technologies, Wollongong, NSW Australia, September 23-26, 2012.

IC28. Bhattacharya, S., Wadhwa, A., and Gupta, A.K. (2012), “Flow stress prediction in austenitic stainless steel 316 at elevated temperatures (673 K – 923 K)” International Conference on Materials Processing and Characterization (ICMPC), Hyderabad, March 8-10, 2012, pp 124-128.

IC27. Sainath, V., Sukesh, M.V., and Gupta, A.K. (2012), “Flow stress prediction in austenitic stainless steel 304 at elevated temperatures” International Conference on Materials Processing and Characterization (ICMPC), Hyderabad, March 8-10, 2012, pp 129-134.

IC26. Hussaini, S.M., and Gupta, A.K. (2012), “Mechanical threshold stress model for prediction of flow stress” International Conference on Materials Processing and Characterization (ICMPC), Hyderabad, March 8-10, 2012, pp 135-138.

2011:

IC25. Gupta, A.K., Hariharan, G. and Sivakumar, A.I. (2011), “Pareto control in multi-objective dynamic scheduling using artificial neural network,” In proceedings of the 2011 International Conference on Advances in Supply Chain and Manufacturing Management (ASCMM 2011), Kharagpur, India, Dec. 16-18, 2011.

IC24. Singh, S.K., Reddy, R. and Gupta, A.K. (2011), "Comparison on Load and Formability of Low Carbon Steel in Warm and Hydro-mechanical Deep Drawing" International Conference on Materials Science, Metal & Manufacturing (M3), Singapore, Dec 12-13, 2011.

IC23. Anirudh, V.K., Amrutha, G., Gupta, A.K. and Singh, S.K. (2011), “Flow stress prediction in austenitic stainless steel 316 at elevated temperatures”, International Conference on Advances in Materials and Materials Processing, IIT Kharagpur, India, Dec 9-11, 2011.

IC22. Jayahari, L., Gaud, R., Gupta, A.K. and Singh, S.K. (2011), "Experimental and Design consideration of Stretching of EDD steel sheet at elevated temperatures" International Conference on Advances in Materials and Materials Processing, IIT Kharagpur, India, Dec 9-11, 2011.

2010:

IC21. Singh, S.K., Swathi, M., Ramjee and Gupta, A.K. (2010), “Experimental Investigations and Thermal Analysis of Formability of EDD Steels in Warm Forming (up to 4500 C)” 3rd International and 24th AIMTDR, College of Engineering AU, Vishakapatnam, India, Dec 13-15, 2010.

IC20. Hussaini, S.M., Majumdar, B., Akhtar, D. and Gupta, A.K. (2010), “Evaluation of glass forming ability in bulk Zr based glasses alloying with Ti, Nb” 2nd International Conference on Production and Industrial Engineering (CPIE), NIT Jalandhar, India, Dec 3-5, 2010.

IC19. Singh, S.K., Kranti Raj, M.L., Hussaini, S.M., and Gupta, A.K. (2010), “Characterization and formability of aluminum IS 737 40800 grade material at elevated temperature” 2nd International Conference on Production and Industrial Engineering (CPIE), NIT Jalandhar, India, Dec 3-5, 2010.

IC18. Singh, S.K. and Gupta, A.K. (2010), “Comparison of yield criteria for warm forming of EDD steel using FEM” International Conference on Computing, New Delhi, India, Dec 27-28, 2010.

2009:

IC17. Singh, S.K. and Gupta, A.K. (2009), “Application of Support Vector Regression in Hydro-mechanical Deep Drawing”, International Conference on Advances in Mechanical Engineering, S.V. National Institute of Technology, Surat, Gujarat, India, Aug 3-5, 2009, 1073-1077.

IC16. Sanghvi, R.S., Azharuddin, M., SaiKiran.J.G., Srikesh, K., Mahesh, K., Gupta, A.K. and Singh, S.K. (2009), “Study of the effect of temperature on material properties of EDD steel using Artificial Neural Network”, International Conference on Advances in Mechanical Engineering, S.V. National Institute of Technology, Surat, Gujarat, India, Aug 3-5, 2009, 1069-1072.

2008:

IC15. Singh, S.K., Gupta, A.K., Kumar, A. and Viswanath, P., (2008) “Application of support vector regression in predicting spring back in V-bending”, 2nd International and 23rd All India Manufacturing Technology, Design and Research Conference (AIMTDR), IIT Chennai, Dec 15-16, 2008, 105-109.

IC14. Gupta, A.K., Lendermann, P., Sivakumar, A.I. and Priyadi, J. (2008), “Simulation analysis of cluster tool operations in wafer fabrication,” In proceedings of the 2008 Winter Simulation Conference (WSC 2008), Miami, Florida, USA, Dec. 07-10, 2008, 2141-2147.

2007 and before

IC13. Gupta, A.K., L Loh,Y,  and Sivakumar, A.I. (2007), “Performance analysis of cluster tools in semiconductor manufac- turing”, SIMTech technical reports, Vol. 10(3), p. 166-173

IC12. Gupta, A.K. and Sivakumar, A.I. (2006), “Pareto control in multi-objective dynamic scheduling of a stepper machine in semiconductor wafer fabrication,” In proceedings of the 2006 Winter Simulation Conference (WSC 2006), Monterey, CA, USA, Dec. 3-6, 2006, 1749-1756.

IC11. Swe, A.N., Gupta, A.K., Sivakumar, A.I., and Lendermann, P. (2006), “Cycle time reduction at cluster tool in semiconductor wafer fabrication,” In proceedings of the 8th Electronics Packaging Technology Conference (EPTC 2006), Singapore, Dec. 6-8, 2006, 671-677.

IC10. Liow L.F., Gupta, A.K. and Gan B.P. (2005), “Batching size effect on inter-fab logistics and production cycle time in borderless fab”, In proceedings of the 3rd International Conference on Modeling and Analysis of Semiconductor Manufacturing (MASM 2005), Singapore, Oct 6-7, 2005, 326-331.

IC9.    Gupta, A.K. and Sivakumar, A.I. (2005), “On-time Delivery Pareto Controllability for Batch Processing in Semiconductor Manufacturing”, In proceedings of the 3rd International Conference on Modeling and Analysis of Semiconductor Manufacturing (MASM 2005), Singapore, Oct 6-7, 2005, 13-20.

IC8.    Gupta, A.K., Sivakumar, A.I. and Ganesan V.K. (2004), “Cycle time reduction in batch processes using look-ahead batch scheduling”, In proceedings of the 33rd International Conference on Computers and Industrial Engineering, Jezu, Korea, CIE 253. [Received Dr Eldin’s Best Paper Award and Prize]

IC7.    Ganesan V.K., Gupta, A.K., and Sivakumar, A.I. (2004), “Bi-objective schedule control of batch processes in semiconductor manufacturing”, In proceedings of the IEEE Conference on Robotics, Automation and Mechatronics (RAM-2004), Singapore, Dec. 1-3, 2004, 1077-1082.

IC6.    Gupta, A.K., Sivakumar, A.I., and Ganesan, V.K. (2004), “Look ahead batching to minimize earliness/tardiness measures in batch processes”, In proceedings of the IEEE Conference on Robotics, Automation and Mechatronics (RAM-2004), Singapore, Dec. 1-3, 2004, 1101-1106.

IC5.    Ganesan V.K., Gupta, A.K., and Sivakumar, A.I. (2004), “Dynamic bi-objective Pareto-schedule generation and control in semiconductor supply chain”, In proceedings of the IEEE International Engineering Management Conference (IEMC-2004), Singapore, Oct. 18-21, 2004, 1212-1216.

IC4.    Gupta, A.K., Ganesan V.K. and Sivakumar, A.I. (2004), “Hot lot management: minimizing cycle time in batch processes”, In proceedings of the IEEE International Engineering Management Conference (IEMC-2004), Singapore, Oct. 18-21, 2004, 1217-1221.

IC3.    Gupta, A.K., Sivakumar, A.I., and Sarawgi, S. (2002), “Shop floor scheduling with simulation based proactive decision support”, In proceedings of the 2002 Winter Simulation Conference (WSC 2002), San Diego, California, USA, 1897 -1902.

IC2.    Gupta, A.K. and Sivakumar, A.I. (2002), “Simulation based multiobjective schedule optimization in semiconductor manufacturing”, In proceedings of the 2002 Winter Simulation Conference (WSC 2002), San Diego, California, USA, 1862 -1870.

IC1.    Gupta, A.K. and Sivakumar, A.I. (2002), “Approaches to multiobjective scheduling optimization in semiconductor back-end”, In proceedings of the 2nd International Conference on Modeling and Analysis of Semiconductor Manufacturing (MASM 2002), April 10-12, 2002, Tempe, Arizona, USA, 223-228

 

Publications in National Conferences:

NC3. PS Priyatham, D Agarwal, AK Gupta. (2023), “Topology Optimization for Designing a Wheel Rim”, National Conference on Multidisciplinary Analysis and Optimization (NCMAO), IIT Madras, 331-338.

NC2. Singh, S.K. and Gupta, A.K. (2009), “Neural network and support vector regression modeling of turning operation”, National Conference on Recent Advances in Manufacturing Technology (NCRAMT), Mar 14-15, 2009, SASTRA University, Thanjavur, Tamilnadu, India, 132-140.

NC1.   Agarwal, A., Karthickeyan, Y., Pulsingh P. and Gupta, A.K. (2008), “Multi-objective optimization of machining parameters using non-dominated sorting genetic algorithm-II,” In proceedings of the National Conference on Algorithms 2008 (NCA 2008), Mumbai, India, May 16-17, 2008.