International Journal articles

30

Muralidhar V, Kiran C P., Onkar P K, Pravesh Sharma (2024), Biodegradability, Eco-toxicological, Cell Viability and MQL Re-Usability Studies on Modified Vegetable Oil Metalworking Fluids, Arabian Journal for Science and Engineering, https://doi.org/10.1007/s13369-024-08941-7.

29

Sreejith S, Amrita Priyadarshini, Kiran C P, Prabhu G, Phani M(2023), Effect of machining operations on mechanical properties, surface integrity and corrosion resistance of tungsten heavy alloy, Materials Today Communications, 106930 (SCI).https://doi.org/10.1016/j.mtcomm.2023.106930.

28

Neeraj K Jha,  Naga Vamikrishna Jasti, Kiran C P, Srinivas Kota, Gaurav Nagpal (2023) An empirical study for implementation of sustainable production practices in Indian Industries, The TQM Journal (Accepted)DOI:10.1108/TQM-06-2022-0209  (SCOPUS)

27

Muralidhar V, Kiran C P. Pranay T(2023), Characterization and machine learning based parameter estimation in MQL machining of a superalloy for developed Nano-Metal Working Fluid, Journal of Brazilian society of mechanical sciences and engineering, 45(3), 154. (SCIE)

26

Gayatri Vineela M, Kiran C P, Sujith R, Bhavika S (2023), Experimental investigation and machine learning prediction of mechanical properties of graphene nanoplatelets based triaxial braided composites, Materials Today Communications, 32(2), 182-210. https://doi.org/10.1016/j.mtcomm.2022.105305 (SCI)

25

Neeraj K Jha,  Naga Vamikrishna Jasti, Kiran C P, Srinivas Kota, Lokesh Vijayavarigy (2023), Validity and Reliability of sustainable supply chain mangement frameworks in Indian smart manufacturing Industry,  Management of Environmental Quality, An international journal, 34(2), 865-901. Doi: https://doi.org/10.1108/MEQ-04-2022-0098 (SCOPUS)

24

Sreejith S, Amrita Priyadarshini, Kiran C P, Prabhu G(2023), Machining and Tribological characterization of uncoated and coated carbide inserts while turning Tungsten heavy alloy, Defence Science Journal, 73(1), 61-70. (SCI)

23

Gayatri Vineela M,Kiran C P, Sujith R, Bhavika S (2022),  Effect of graphene nanoplatelets on mechanical properties of triaxially braided composites", Advance Composite Materials, https://doi.org/10.1080/09243046.2022.2080990 (SCI)

22

Neeraj K Jha, Jasti Naga Vamsikirshna,  Kiran C P, Srinivas Kota (2022), Sustainable porduction system: literature review and trends, Management of environment quality, 33, 692-717, Emerald. SCOPUS

21

Gayatri Vineela M,  Kiran C P, Sujith R (2020), Fabrication and mechanical characterization of glass fibre reinforced triaxially braided, Journal of Composite Materials, 55(3), 361-376. SCI https://doi.org/10.1177%2F0021998320948932

20

Sreejith S, Amritha Priyadarshini, and Kiran C.P. (2020)" Multi-objective optimization of surface roughness and residual stress in turning using grey relation analysis"Materials Today: Proceedings, https://doi.org/10.1016/j.matpr.2020.02.594 (SCOPUS)

19

Madan M R and Kiran.C.P. (2020),"Performance Evaluation of Novel Developed Biodegradable Metal Working Fluid during Turning of AISI 420 Materials", Journal of the Brazilian Society of Mechanical Sciences and Engineering, 42. 319-1-16. SCIE

18

Muralidhar V, Kiran C P(2020), A review on testing methods of metalworking fluids for environmental health, Materials Today: Proceedings, https://doi.org/10.1016/j.matpr.2020.02.514(SCOPUS)

17

Gayatri Vineela M, Kiran C P, Sujith R (2020), Experimental investigation and analytical modeling of dry glass fiber braided sleeves for tensile behavior, Materials Today: Proceedings, https://doi.org/10.1016/j.matpr.2020.02.243. (SCOPUS)

16

Rishabh Agrawal, Kiran C P, Madan Mohan Reddy (2020), Evaluation for sustainability of machining processes in Indian small scale industries, Materials Today: Proceedings, Vol. 22. pp. 2849-59.  (SCOPUS)

15

Sachin.R.P. and Kiran.C.P. (2019),"A Review of Magnetic Assisted Machining Processes", Journal of the Brazilian Society of Mechanical Sciences and Engineering, Vol. 41:450, pp.1-17. (SCIE)

14

Madan M R and Kiran C.P (2019) “Investigating Optimum SiO2 Nanolubrication During Turning of AISI 420 SS” Published in International Journal of Engineering, Technology and Applied Science Research, Vol.9, pp. 3821-3824.ESCI

13

M. Ojha, P.K. Penumakala, G. Vineela, Kiran C P, A.K. Gupta, (2019) Processing of GFRP pultruded composites using graphene nanoplatelets modified epoxy, Materials Today Proceedings   Elsevier. (SCOPUS)

12

Madan Mohan Reddy Nune and Kiran C.P (2019): Development, Characterization, and Evaluation of Novel Eco-Friendly Metal Working Fluid, Measurement, Vol.137, pp.401-416 https://doi.org/10.1016/j.measurement.2019.01.066. (Impact factor: 2.212) SCI

11

Gayatri Vineela M, Abhishek Dave, Kiran C P (2018), Artificial Neural Network based Prediction of Tensile Strength of Hybrid Composites, Materials Today: Proceedings, Vol 5(9), Part 3 pp. 19908-19915.(SCOPUS)

10

Madan Mohan Reddy Nune, Vemula Adithya,and Kiran C.P. (2018): Experimental investigation on turning turbine blade material AISI 420 SS(X20 Cr13 alloy) under different cutting fluid conditions, International Journal of Current Engineering Research, Vol 4, pp.22-27.

9

Madan Mohan Reddy Nune and Kiran C.P (2017): Experimental Investigation on Turning of Turbine Blade Material AISI 410 under Minimum Quantity Cutting Fluid, Materials Today: Proceedings, Vol 4(2), Part A, pp. 1057-1064.(SCOPUS)

8

Madan Mohan Reddy N. and Kiran C.P. (2017), An Innovative FEA methodology for Minimizing the Heat generation on Tungsten carbide insert by applying Air and Water as Coolants, International Journal of Applied Engineering Research, Vol. 24, pp. 14710-17. SCOPUS

7

Kiran C.P. and Shibu Clement (2013): Surface quality investigation of turbine blade steels for turning process, Measurement, Vol.46, pp.1875-95. Elsevier Publisher (Impact factor: 2.212) (SCI)

6

Kiran C.P., Shibu Clement and Agrawal V.P. (2013): Mechatronic system reliability modeling and analysis, International Journal of Reliability and Safety, Vol.7, pp.128-155. (SCOPUS)

7

Kiran C.P., Shibu Clement and Agrawal V.P. (2012): Quality modeling and analysis of a mechatronic system, International Journal of Industrial Systems, Vol.12, pp.1-28. (SCOPUS)

6

Kiran C.P., Shibu Clement and Agrawal V.P. (2011): Coding, evaluation and selection of a mechatronic system, Expert system with application, Vol.38, pp.9704-9712. (Impact factor: 3.768) (SCI)

5

Kiran C.P., Shibu Clement and Agrawal V.P. (2011): Coding, evaluation and selection of a mechatronic system, Expert system with application, Vol.38, pp.9704-9712. (Impact factor: 3.768) (SCI)

4

Kiran C.P., Shibu Clement and Agrawal V.P. (2011): Design for x-abilities of a mechatronic system-a concurrent engineering and graph theoretic approach, Concurrent engineering- research with applications, Vol.19, pp.55-69. (Impact factor: 0.478)( SCI)

3

Kiran C.P, Shibu Clement and Agrawal V.P.(2011): X-abilities based concurrent design and evaluation of mechatronic system, Journal of mechatronics and intelligent manufacturing, Vol.2, pp.115-127.

2

Kiran C.P., Shibu Clement and Agrawal V.P. (2011): Design for x-abilities of a mechatronic system-a concurrent engineering and graph theoretic approach, Concurrent engineering- research with applications, Vol.19, pp.55-69. (Impact factor: 0.478) (SCI)

1

Kiran C.P, and Agrawal V.P. (2009): Structural modeling and analysis of a mechatronic system: A Graph theoretic Approach, Journal of mechatronics and intelligent manufacturing, Vol.1, pp. 24-48

Book Chapter 

3

Kiran C.P, Madam mohan reddy N(2022), Book chapter: Characterization and evaluation of eco-friendly cutting fluids, "Advances in sustainable machining and manufacturing process", Chapter 3, CRC press              Edited by:Kishore Kumar Gajarani et. al. ISBN:9781032081656, pp.31-49, DOI: 10.1201/9781003284574-4

2

Vardhanapu M., Chaganti P.K. (2021) Sustainability Index of Metalworking Fluids in the Manufacturing Industry for Sustainable Manufacturing. In: Hussain C.M., Di Sia P. (eds) Handbook of Smart Materials, Technologies, and Devices. Springer, Cham. https://doi.org/10.1007/978-3-030-58675-1_60-1

1

Madan Mohan Reddy N. and Kiran C.P. (2018), Investigating the effect of metal working fluid in orthogonal cutting of AISI 420 stainless steel using 3-dimensional finite element model,Lecture Notes in Mechanical Engineering, Vol , I , B 593-E 602. https://doi.org/10.1007/978-981-32-9931-3_57

International/National conferences        

9

Sreejith S, Amrita Priyadarshini, Kiran C P (2023), Advanced FE-based Hybrid Algorithms to Optimize Uncertain Multi response Process Parameters in Tungsten Heavy Alloy Machining, AIMTDR2023, Dec 8-10, Varanasi, India.

8

Madan Mohan Reddy N. and Kiran C.P. (2016), Investigating the machining performance of turbine blade profile using SiO₂ nanoparticle based eco-friendly cutting fluid, XIII^th International conference on high speed machining HSM 2016, October 4-5, 2016, Metz, France.

7

Madan Mohan Reddy N. and Kiran C.P. (2016), A review on ecofriendly cutting fluids and techniques used in material cutting operation, Recent Advances in Manufacturing and Robotics RAMR 2016, April 22-23, 2016, Hyderabad, India.

6

Joshua Amrith Raj C and Kiran C P (2016), Machining simulation of AISI 316 steel using water droplets as cutting fluid, Recent Advances in Manufacturing and Robotics RAMR 2016, April 22-23, 2016, Hyderabad, India

5

Kiran C P and Shibu Clement (2015): X-Abilities and Attributes Based Decision Making In Evaluation And Selection Of A Turbine Blade Material, ICMIE 2015, Singapore, March 21-23. (Paper accepted and going to present in the month of march).

4

Kiran C.P., Shibu Clement, H.Chelladurai (2014): Experimental evaluation of quality interactions in material processing, Proceedings of International conference on Product Life cycle, Modeling, Simulation and Synthesis, PLMSS2014, Jan 6-8, 2014, VIT, Vellore, Tamilnadu, India

3

 Kiran C.P. and Shibu Clement (2013): Turbine blade material selection for CNC Turning using MADM, Proceedings of International Conference on Advances in Mechanical Engineering, May 29-31, 2013, COEP, Pune, Maharashtra, India

2

Kiran C.P., Shibu Clement and Aneet S.R. (2012): Experimental investigation for surface quality of turbine blade material, 4^th International & 25^th All India Manufacturing Technology, Design Research, AIMTDR 2012, Dec 14-16 , Kolkota, pp. 822-827.

1

Kiran C.P., Shibu Clement and Agrawal V.P. (2010): Quality analysis of a mechatronic system using colored graph and Boolean function, National Systems Conference, 10-12 Dec, Suratkal, India, pp. 58-59.