|
S. No.
|
Project Title
|
Project Investigator(s)
|
Funding Agency
|
Sanctioned Amount (Lakhs)
|
Period
|
|
14
|
Formability study of Inconel 625 alloy at elevated temperatures for aerospace applications
|
Dr. Nitin Kotkunde
|
DST
|
31.43
|
2017-2020
|
|
13
|
Cryogenically conditioned micro- and nano- encapsulated phase change material slurries for cool thermal energy storage applications
|
Dr. Parameshwaran R.
|
DST
|
27.76
|
2017-2020
|
|
12
|
Application of topology optimization to enhance energy efficiency and performance of industrial manipulator
|
Dr. Arshad Javed
|
DST
|
29
|
2017-2020
|
|
11
|
Study of lubrication method for enhanced surface finish and reduced draw load on cold draw steel tubes
|
Prof. A. K. Gupta (Co-PI), Prof. S. P. Regalla (Co-PI)
|
Tubes Investment India Ltd.
|
27.5
|
2017-2020
|
|
10
|
Development of metamaterial base support for isolating vibrations
|
Dr. Sabareesh G. R., Prof. Y. V. D. Rao (Co-PI)(Co PI)
|
DMDE (DRDO)
|
13.8
|
2017-2018
|
|
9
|
Novel casting approach to improve quality of Aluminum alloy casting
|
Prof. N. S. K. Reddy
|
DRDL (DRDO)
|
9.85
|
2017-2020
|
|
8
|
Modelling and simulation of quartz accelerometer for navigation system
|
Dr. Satish K. Dubey, Dr. Arshad Javed (Co-PI), Prof. A. K. Gupta (Co-PI)
|
RCI (DRDO)
|
5.3
|
2017-2018
April-June
|
|
7
|
Enhancement of mechanical properties of Ti-6Al-4V using constrained groove pressing and heat treatment
|
Prof. A. K. Gupta
|
ARMREB (DRDO)
|
45.6
|
2016-2019
|
|
6
|
Hydrogen storage in mesoporous polymer derived ceramics for automotive application
|
Dr. Sujith R. Dr. Parameshwaran R. (Co-PI)
|
DST
|
42.38
|
2016-2019
|
|
5
|
Studies on remaining useful life prediction considering multi-component failures in a wind turbine using prognostic health monitoring techniques
|
Dr. Sabareesh G. R.
|
DST
|
26.04
|
2016-2019
|
|
4
|
Simulation and modelling to minimize porosity level in Aluminium castings by using ultrasonic stir casting
|
Prof. N. S. K. Reddy
|
L& N Structural Engineers (P) LTD
|
8.03
|
2016-2019
|
|
3
|
Understanding forming behaviour of Ti6Al-4V material between 400-850 C in deep drawing set up
|
Prof. A. K. Gupta (Co-PI)
|
ARDB (DRDO)
|
9.85
|
2016-2018
|
|
2
|
Heat transfer modeling of cold water mist at the cutting zone using FSI model in machining of turbine blade materials
|
Dr. Phaneendra Kiran C.
|
ACRG (BITS)
|
9
|
2015-2017
|
|
1
|
Characteristics and modeling of tornado induced wind loading on low-rise buildings
|
Dr. Sabareesh G. R.
|
NSFC, China
|
***
|
2015-2018
|