BITS Pilani

  • Page last updated on Monday, August 24, 2020

Publications

banner
Publications

Publications

Journal Publications:

1. G. L. Srinivas, A.Javed,"Topology Optimization Of Industrial Manipulator-Link Considering Dynamic Loading", Mechanism and Machine Theory, 153 (2020). (SCI)

2. Tata Rao, L., Rewatkar, P., Dubey, S. K., Javed, A., & Goel, S. (2020). Performance optimization of microfluidic paper fuelcell with varying cellulose fiber papers as absorbent pad. International Journal of Energy Research44(5), 3893-3904. (SCI)

3. Rao, L. T., Dubey, S. K., Javed, A., & Goel, S. (2020). Statistical Performance Analysis and Robust Design of Paper Microfluidic Membraneless Fuel Cell With Pencil Graphite ElectrodesJournal of Electrochemical Energy Conversion and Storage (ASME), 17(3). (SCIE)

4. Jaligam Murali Mohan, Khairunnisa Amreen, Arshad Javed, Satish Kumar Dubey and Sanket Goel (2020), Modified Graphite Paper Based Miniaturized Electrochemically Optimized Hydrazine Sensing Platform, ECS Journal of Solid State Science and Technology (accepted for publication) (SCI/ SCIE)

5. Sangam Srikanth, Sohan Dudala, Sushil Raut, Satish Kumar Dubey, Idaku Ishii, Arshad Javed and Sanket Goel (2020) Optimization and Characterization of Direct UV Laser Writing System for Microscale Applications,  Journal of Micromechanics and Microengineering (accepted for publication) (SCI)

6. Dipankar Nath, Sarala Kallepalli, Lanka Tata Rao, Satish Kumar Dubey, Arshad Javed and Sanket Goel (2020),Microfluidic Paper Microbial Fuel Cell Powered by Shewanella putrefaciens in IoT Cloud Framework,  International Journal of Hydrogen Energy, (accepted for publication) (SCI)

7. Alugoju Uday Kumar, Satish Kumar Dubey, Arshad Javed (2020) Optimization of Converging and Diverging Micro channel Heat Sink for Electronic Chip CoolingIEEE, Transactions on Components, Packaging and Manufacturing Technology, vol 10 (5), pp 817-827 (SCI) 

8. Lanka Tata Rao, Satish Kumar Dubey, Arshad Javed, and Sanket Goel (2020) Performance Optimization of Microfluidic Paper Fuel Cell with Varying Cellulose Fiber Papers as Absorbent Pad. accepted for publication with International Journal of Energy Research, (SCI) 

9. Arshad Javed, Joshua Amrith Raj, and BK Rout. “Integrated Method for Performance Analysis of Reliability-Based Topologically Optimized Components.” Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, August 2019, vol. 233(19–20), pp.7019–7040. doi:10.1177/0954406219865757(SCI)

10. Amitabh, K., & Javed, A. (2015). Simulation of dynamic performance-reliability for indigenously developed 3-DOF manipulator. International Journal of Mechanical Engineering and Materials Science. 8(1), (Spl. Issue for selected conference papers)

11. Ashish Mishra, Arshad Javed, Karan Bhargava, Kaustubh Tanmane, Hardik Shah, Design flow cycle and simulation of load mover, International Journal of VLSI And Embedded Systems, Vol. 06, Issue 4 April 2015 pp. 1487-1492.

12. Javed, A., & Rout, B.K. (2014). Tolerance range selection of topologically optimized structures with the effects of uncertainties of manufacturing process. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 228, 3441-3461. (SCI)

13. Javed, A., & Rout, B.K. (2013). Tolerance range selection of topologically optimized structure using combined array design of experiments approach. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 227, 2023–2038. (SCI)

14. Javed, A., Sengar, A., & Rout, B.K. (2012). A FEM and image processing based method for simulation of manufacturing imperfections. Asian Review of Mechanical Engineering, 1, 1-5. (Spl. Issue for selected conference papers).

15. Javed, A., & Rout, B.K. (2012). Investigation on parametric sensitivity of topologically optimized structures. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 226, 2791–2804. (SCI)

  
Conference Papers:
 

1.   Sangam Srikanth, Jaligam Murali Mohan, Sohan Dudala, Satish Kumar Dubey, Arshad Javed and Sanket Goel (2020), Direct UV Laser Writing System to Photolithographically Fabricate Optimal Microfluidic Geometries: Experimental Investigations, Materials Today: Proceedings. (Scopus)

2.     Ajmera, Y., & Javed, A. (2020, September). Shared Autonomy in Web-Based Human Robot Interaction. In Proceedings of SAI Intelligent Systems Conference (pp. 696-702). Springer, Cham.

3.  Mishra, R., Ajmera, Y., Mishra, N., & Javed, A. Ego-Centric framework for a three-wheel omni-drive Telepresence robot. In 2019 IEEE International Conference on Advanced Robotics and its Social Impacts (ARSO) (pp. 281-286). IEEE. (Scopus)  

4.  Srinivas, G. L., & Javed, A. (2020). Numerical evaluation of topologically optimized ribs for mechanical componentsMaterials Today: Proceedings. (Scopus)

5.     Dudala, S., Rao, L. T., Dubey, S. K., Javed, A., & Goel, S. (2020). Experimental characterization to fabricate CO2 laser ablated PMMA microchannel with homogeneous surfaceMaterials Today: Proceedings. (Scopus)

6.   Sangam Srikanth, Jaligam Murali Mohan, Sohan Dudala, Satish Kumar Dubey, Arshad Javed and Sanket Goel (2020), Direct UV Laser Writing System to Photolithographically Fabricate Optimal Microfluidic Geometries: Experimental Investigations. Materials Today: Proceedings. (Scopus)

7.      Mishra, Ruchik, Ajmera, Yug. Mishra, Nikhil. Javed, Arshad. Ego-Centric Framework for a Three-Wheel Omni-Drive Telepresence Robot,2019 IEEE International Conference on Advanced Robotics and its Social Impacts (ARSO), Oct. 31 - Nov. 2, 2019, BIT, Beijing, China. (Scopus)

8.      G. Lakshmi Srinivas & Arshad Javed. (2019). A Review on Optimization Methods to Enhance Energy Efficiency of Robots. National Conference on Multidisciplinary Design, Analysis, and Optimization NCMDAO, M.S Ramaiah Institute of Technology, Bangalore, 22-23 March 2019.

9.      Srinivas, G. L., & Javed, A. (2019). Topology Optimization of Industrial Manipulator-Link Considering Dynamic LoadingMaterials Today: Proceedings18, 3717-3725. (Scopus)

10. Sandeep Sulake, Satish Kumar Dubey, Arshad Javed (2019). Numerical Heat Transfer Simulations and Parametric Investigations using Crossed Array Design of Experiments Approach during RFA of Breast Tumor, Proceedings of the ASME 2019 Summer Heat Transfer Conference,HT2019, July 15-18, 2019, Bellevue, WA, USA. (Scopus)

11. Uday Kumar, A., Dubey. S. K., & Javed, A. (2019). Numerical Simulation of Flow Boiling In Micro Channel to Study Bubble Dynamics. Proceedings of the ASME 2019 Summer Heat Transfer Conference,HT2019, July 15-18, 2019, Bellevue, WA, USA. (Scopus)

12. Srinivas, G. L., & Javed, A. (2020). Numerical Simulation and Experimental Study on Lightweight Mechanical Member. In Advanced Engineering Optimization through Intelligent Techniques (pp. 631-641). Springer, Singapore. (Scopus)

13. Rao, L. T., Goel, S., Dubey, S. K., & Javed, A. (2019, August). Performance Investigation of T-Shaped Micromixer with Different Obstacles. In Journal of Physics: Conference Series (Vol. 1276, No. 1, p. 012003). IOP Publishing. (Scopus)

14. Alugoju, U. K., Manmode, R., Dubey, S. K., & Javed, A. (2019, August). Numerical Modelling of Flow Boiling in Expanding Microchannel with Non-Uniform Heat Flux. In Journal of Physics: Conference Series (Vol. 1276, No. 1, p. 012045). IOP Publishing. (Scopus)

15. Mishra, R., & Javed, A. (2018, April). ROS based service robot platform. In 2018 4th International Conference on Control, Automation and Robotics (ICCAR) (pp. 55-59). IEEE. (Scopus)

16. Uday Kumar, A., Javed, A., & Dubey, S. (2018). Material Selection for Microchannel Heatsink: Conjugate Heat Transfer Simulation. IOP Conference Series: Materials Science And Engineering, 346, 012024. doi: 10.1088/1757-899x/346/1/012024. (SCOPUS)

17. G. Lakshmi Srinivas, C. Joshua Amrith Raj & and Arshad Javed (2018). Topology Optimization of Rotating Mechanical Members, 1st Symposium and Workshop for Analytical Youth on Applied Mechanics(SWAYAM), July 04 – 06, BITS Pilani, K. K.Birla Goa Campus.

18. Lanka Tata Rao, K Aravind, Satish Kumar Dubey & Arshad Javed (2018). Numerical Simulation and Optimization of Micromixer Performance, 1st Symposium and Workshop for Analytical Youth on Applied Mechanics(SWAYAM), July 04 – 06, BITS Pilani, K. K.Birla Goa Campus.

19. Raj J.A., Javed A. (2017) Robust Design Methodology of Topologically Optimized Components Under the Effect of Uncertainties. In: Zeghloul S., Romdhane L., Laribi M. (eds) Computational Kinematics. Mechanisms and Machine Science, vol 50. Springer, Cham (SCOPUS)

20. Moloy Das, Akshaya Agrawal, Abhinav Sonone, Rishabh Gupta, Deepak Upadhyay, YVD Rao and Arshad Javed (2016),  Developing a Bioinspired Pole Climbing Robot, IEEE International Conference on Robotics: Current Trends and Future Challenges (RCTFC), SASTRA University, Thanjavur, December 19 & 20. 2016. (SCOPUS)

21. Javed, A., Rout, B.K. (2015), Robust and Targeted Performance Design of Topologically Optimized Components using Statistical Method, Fifth International Conference on Product Lifecycle Modeling, Simulation and Synthesis (PLMSS-2015), BITS-Pilani, Hyderabad Campus, December 15-17, 2015.

22. Mohit, K., Milind, M., Rahul, P., & Javed, A. (2014). Intelligent lighting system for college classroom, In Proceedings of International Conference on Advancements and Futuristic Trends in Mechanical and Materials Engineering, Punjab Technical University, (pp. 369-373), Kapurthala, Punjab, India, , October 16-18, 2014.

23. Kulkarni, A., & Javed, A. (2014). Performance investigation of topologically optimized manipulator link, In Proceedings of International Conference on Advancements and Futuristic Trends in Mechanical and Materials Engineering, Punjab Technical University, (pp. 342-345), Kapurthala, Punjab, India, October 16-18, 2014.

24. Amitabh, K., & Javed, A. (2014). Simulation of dynamic performance-reliability for indigenously developed 3-DOF manipulator, In Proceedings of International Conference on Advancements and Futuristic Trends in Mechanical and Materials Engineering, Punjab Technical University, (pp. 253-257), Kapurthala, Punjab, India, October 16-18, 2014.

25. Shankar, A., Kumar, R., Bhandge, S. V., Shradhe, S. B., Srinivas, N., & Javed, A. Dynamic modeling of multi motioned hexapode. In Proceedings of International Conference on Computer Aided Engineering (CAE-2013), Indian Institute of Technology, Madras, (pp. 866-871). Chennai, India, December 2013.

26. Bhargav T., Aggarwal S., Das S.K., Javed, A., "Design of a simplified four legged walker", In Proceedings of International Conf. on Advancements and Futuristic Trends in Mechanical and Materials Engineering, Punjab Technical University, Kapurthala, Punjab,  INDIA, October 2013.

27. Javed, A., Rao, J. M., & Sasi, J. C., "Simulation of Performance-Reliability for Indigenously Developed Manipulator", In Proceedings of National Conference on Advances in Manufacturing Technology, National Institute of Technical Teachers' Training and Research, Chandigarh, India, (pp. 299-301.), May 2013.

28. Javed, A., Rout, B.K., "Parametric Sensitivity of Topologically Optimized Structures using RBTO Technique", In Proceedings of Third Asian Conference on Mechanics of Functional Materials and Structures (ACMFMS 2012), Indian Institute of Technology, Delhi, India, Dec.5-8, 2012, pp. 252-255.

29. Javed, A., Sengar, A. K., Rout, B.K., "A FEM and Image Processing Based Method for Simulation of Manufacturing Imperfections", In Proceedings of International Conference on Advancements and Futuristic Trends in Mechanical and Materials Engineering, Punjab Technical University, Kapurthala, India, October 5-7, 2012, pp. 255-229

30. Javed, A., Rout B. K., "Issues in Design for Manufacturing using Topology Optimization Method", Presented in National Conference on Modeling, Computational Fluid Dynamics & Operations Research Under UGC-SAP, DRS I,  Birla Institute of Technology & Science, Pilani, Rajasthan, February 4-5, 2012.

31. Javed, A., Soni,G., “Quantifying Push and Pull in Supply Chain”, Proceedings of Twenty-seventh National Convention of Mechanical Engineers on Advances in MEMS and Robotics in Manufacturing Industries, Jaipur, India, September 3-4, 2011.

32. Javed, A., Safal, M., Rout, B. K., "Numerical Simulation of Compliance Variation for a Topology-Optimized Structure", In Proceedings of IEEE international conference on Process Automation, Control and Computing (PACC), Coimbatore, Tamilnadu, India, July 20-22, 2011.pp 1-5. D.O.I.: 10.1109/PACC.2011. 5978893. (SCOPUS indexed)

33. Aqsa, M.,Rwitajit, M., Javed, A., "A Neural Network Based Approach for Error Minimization in the Inverse Kinematics Solution for 6-DOF Manipulator", In Proceedings of 5th international conf. on advances in Mechanical Engineering, pp. 936-939, SVNIT, Surat, India, June 6-8, 2011.

34. Gupta A., Javed A., Rout B.K., “Chronicle of Humanoid Research at Birla Institute of Technology and Science, Pilani – AcYut” In Proceedings of Robotics Symposium – 29-30 April 2011, at Research and Development Establishments (Engg.), Pune, India.

35. Javed, A., Rout, B.K., Mittal R.K., “Multi-Criteria Decision Making Tool to Select the Actuator of Industrial Manipulator”, In Proceedings of National Conference on Mechanism Science and Technology: from Theory to Application, pp 792-797, N.I.T., Hamirpur, Nov 13-14, 2008.

36. Javed, A., Rout, B.K., Mittal R.K., “A review on Compliant Mechanisms for MEMS applications”, In 2nd ISSS National Conference on MEMS, Microsensors, Smart Materials, Structures and Systems, Pilani, India, Nov.15-17, 2007.

  
 
 

 

Quick Links

    An Institution Deemed to be University estd. vide Sec.3 of the UGC Act,1956 under notification # F.12-23/63.U-2 of Jun 18,1964

    © 2020 Centre for Software Development,SDET Unit, BITS-Pilani, India.

    Designed and developed by fractal | ink design studios