BITS Pilani

  • Page last updated on Tuesday, November 07, 2017

Completed Projects

banner
Innovate. Achieve. Lead.

Completed Projects

 

S. No.

Project Title

Project Investigator(s)

 Funding Agency

Sanctioned Amount (Lakhs)

Period

17

Anaerobic co-digestion of food waste and organic fraction of municipal solid waste for the production of biogas and concomitant use of biogas as fuel for cooking and spent slurry as fertilizer

Prof. S .S. Deshmukh (Co PI)

BITS Pilani

62

2014-2017

16

Develop and test certain 3D printing technologies to produce innovative limbs at affordable costs for the disabled in India.

Prof. S. P. Regalla

BIRAC, DBT

47.65

2015-2017

15

Novel minimal-solid lubricant mixture application method for performance improvement in turning

Prof. N. S. K. Reddy

SERC, DST

40.88

2013-2017

14

Development of an integrated approach for modeling and management of micro grid operations

Prof. S .S. Deshmukh

ACRG (BITS)

9

2015-2017

13

Structural health monitoring of wind turbines using a comprehensive condition monitoring scheme.

Dr. Sabareesh  G. R

ACRG (BITS)

8.5

2015-2017

12

Development of portal for power curve guarantee test

Dr. Sabareesh  G. R

Mytrah Energy limited

2.97

2017
Jan-April

Development of portal for re-analysis data and long term correlation with wind data

Dr. Sabareesh  G. R (Co PI)

11

Formability study on constrained groove pressed extra deep drawn (EDD)steel sheets

Prof. A. K. Gupta

UGC

34.2

2014-2016

10

Characterization of fibre/ matrix interface in advanced composites

Dr. N Jalaiah   (Co PI)

ASL (DRDO)

9.96

2015-2016

9

Design and development of an interactive decision support system for regional energy management

Prof. S .S. Deshmukh

UGC

6

2014-2016

8

Design and thermal analysis of electronic controller

Prof. Jeevan Jaidi

HBL Power Systems

2.5

2016
April-June

7

Solid lubricant coated tools for sustainable machining

Prof. N. S. K. Reddy

CSIR

18.52

2012–2015

6

CFD based process optimization of BQR15 flotation cell and scale-up for larger cells (Phase-2)

Prof. Jeevan Jaidi

TenovaDelkor, India

18.2

2014-2015

5

Understanding material properties and possible forming behavior (using FEM) of Titanium grade – 5 material at elevated temperatures

Prof. A. K. Gupta

DST

10.15

2012-2015

4

Rapid incremental forming of extra deep drawing (EDD) steel sheet metal parts with asymmetric geometry

Prof. S. P. Regalla

UGC

9.73

2011-2014

3

Process modeling and validation of flotation cell: development of 3-D multiphase turbulent model (Phase-1)

Prof. Jeevan Jaidi

TenovaDelkor, India

7.83

2014
June-Sept.

2

Development of electrostatic micro-solid lubricant coated tools for green machining

Prof. N. S. K. Reddy

ABG Research seed grant

11.8

2011-2013

1

Dynamic strain ageing behaviour in Austenitic stainless steel (304 & 316 Grades)

Prof. A. K. Gupta

DAE

11.64

2009-2012

 

Quick Links

    An institution deemed to be a University estd. vide Sec.3 of the UGC Act,1956 under notification # F.12-23/63.U-2 of Jun 18,1964

    © 2017 Centre for Software Development,SDET Unit, BITS-Pilani, India.

    Designed and developed by fractal | ink design studios