BITS Pilani

  • Page last updated on Thursday, May 18, 2017

Publications

banner
Innovate. Achieve. Lead.

Publications


RESEARCH PAPERS PUBLISHED IN INTERNATIONAL JOURNALS

1.      P.M. Singru and J.P. Modak 2000 International Journal of Sound and Vibration. Vol.242, No. 2, April 2001,pp 277-293. "Computer Simulation of Dynamic and Vibration Response of Arm of a Belt Drive Pulley."(Impact Factor 1.857, citations=3)

2.      P.M. Singru and J.P. Modak Journal of Sound and Vibration. Vol.279, No.3-5, January 2005, pp 1037-1070. "Dynamics Of Arm Of A Flat Belt Drive Pulley With Explanation Of Belt Flutter." (Impact Factor 1.857)

3.      M.M. Raghuwanshi, P.M. Singru, U. Kale, O.G.Kakde 2008, "Synthesis of Modified Simulated Binary Crossover with Lognormal Distribution", Complexity International, Volume 12, Paper ID: msid01, URL: http://www.complexity.org.au/vol12/msid01/ (citations=17)

4.  Raghavendra D. Naik, Pravin M. Singru, Mechanics Research Communication,  "Establishing the Limiting Conditions of Operation of Magnetorheological Fluid Dampers in Vehicle Suspension System." Volume 36, Issue 8, December 2009, Pages 957-962. (Impact Factor 1.4) (SCI and scopus)(citations=11)

5.      K.V.R.B. Prasad and Pravin M. Singru, 2010, International Journal of Energy Systems, Computers and Control, "Identifying the Optimum Design of Turbo-Alternator Using Differential Evolution Algorithms"  Volume 1, No. 1, January-June 2010, pp. 33-56.

6.      K.V.R.B. Prasad and Pravin M. Singru,2010,  International Journal of Electrical Engineering (IJEE), "Optimum Design of Turbo-Alternator using Differential Evolution Algorithms", Volume 3, Number 1, pp. 25--44 (ISSN 0974-2158)

7.      R.D. Naik and P. M. Singru, Resonance stability and chaotic vibration of a quarter-car vehicle model with time delay feedback, Communications in nonlinear science and numerical simulation, Volume 16, Issue 8, August 2011, Pages 3397-3410. (Impact Factor 2.834) (citations=29)(Scopus)

8.      Dillip K. Mohanty & Pravin M. Singru, "Use of C-Factor for monitoring of fouling in a shell and tube heat exchanger", Energy. Volume 36, Issue 5May 2011Pages 2899-2904 (Impact factor = 4.292), (citations =20)(SCI and scopus)

9.      Kiran D. Mali and   Pravin M. Singru "Determination of The Fundamental Frequency Of Perforated Plate With Rectangular Perforation Pattern of Circular Holes by Negative Mass Approach for the Perforation "International journal of Advanced Materials Manufacturing and Characterization. ,Vol 1, issue 1, March 2012,PP 105-109. (ISSN 2277-3886)

10. Varinder Singh & Pravin M. Singru "Analysis of Restructuring in a Manufacturing system using Graph Theoretic Model", Journal of Manufacturing Technology Management, Vol. 24 Iss: 4, pp.615 – 636, 2013.(Scopus, H-Index=45)

11. Rajput A., Ghosh N.N. and Singru P.M. "Synthesis, characterization and properties of flexible magnetic nanocomposites of CoFe2O4- polybenzoxazine- LLDPE ", Journal of Applied Polymer Science, Volume 128, Issue 6, 15 June 2013, Pages: 3726–3733 . (Impact factor = 1.6) (SCI and scopus)(Citations =6)

12. Dillip Kumar Mohanty and P M Singru" Numerical method for heat transfer and fouling analysis of a shell and tube heat exchanger using statistical analysis", Korean J. Chem. Eng.,Springer, 29(9), 1144-1150, 2012. (Impact factor = 1.408) (SCI and scopus)(Citations =3)

13. Mali K.D.and Singru P.M. "An analytical model to determine fundamental frequency of free vibration of perforated plate by using unit step functions to express non homogeneity", Journal of Vibro-Engineering, Vol 14, Issue 3, pp 1292-1296, September 2012. (Impact factor = 0.384) (SCI and scopus) (Citations =7)

14. R.D. Naik and P. M. Singru "Stability and Hopf bifurcation of a Nonlinear oscillator with multiple time-delays" ,Chaos, Solitons & Fractals Volume 45, Issue 11, November 2012, Pages 1387-1396. (Impact factor = 1.611) (SCI and scopus) (Citations =4)

15. Kiran D. Mali, Pravin M. Singru " An Analytical Model to Determine Fundamental Frequency of Free Vibration of Perforated Plate by Using Greatest Integer Functions to Express Non Homogeneity" Advanced Materials Research Vols. 622-623 (2013) pp 600-604, (2013) Trans Tech Publications, Switzerland, doi:10.4028/www.scientific.net/AMR.622-623.600. (SCI Indexed)

16. Rajput A., Ghosh N.N. and Singru P.M.” Preparation of flexible magnetic nanocomposites of 3 linear low-density polyethylene-polybenzoxazine-magnetic nanoparticles 4 and their mechanical and magnetic properties”, Journal of Nanoscience Letters,2013,3:26, (http://www.cognizure.com/abs/109637285.aspx)            

17. Kiran D. Mali, Pravin M. Singru "An Analytical Model to Determine Fundamental Frequency of Rectangular Plate                 Having            Rectangular Array of Circular Perforations" Journal of Vibro-Engineering Vol 2, 2013, pp 588-596. (Impact factor = 0.384) (SCI and scopus)

18.   Kiran Mali and Pravin Singru "Determination of the fundamental frequency of perforated rectangular plates:         concentrated negative mass approach for the perforation,"Advances in Acoustics and Vibration, (accepted for publication, May 12,2013), Volume 2013 (2013), Article ID 972409, 6 pages (ESCI Indexed)

19. Garg, A., Tai, K., Vijayaraghavan, V. and Singru, P.M. "Mathematical Modelling of Burr Height of the Drilling Process Using a Statistical Based Multi-Gene Genetic Programming Approach", International Journal of Advanced Manufacturing Technology, July 2014, Volume 73, Issue 1-4, pp 113-126. (Impact factor = 1.779)(citations =21) (SCI and scopus)

20.   Kiran Mali and Pravin Singru “Determination of modal constant for fundamental frequency of perforated plate by Rayleigh's method using experimental values of natural frequency”, International Journal of Acoustics and Vibration, Vol. 20, No. 3, 2015 (pp. 177-184), 2015. (Impact factor = 0.284)(ESCI) (Citations =2)

21.   Raghavendra D. Naik & Pravin M. Singru,” Stability of a Nonlinear Quarter-Car System with Multiple time-Delays”,   International Journal of Acoustics and Vibration, Vol. 20, No. 2, 2015, pp 90-94 (Impact factor = 0.284) )(ESCI)

22. Garg, A., Vijayaraghavan, V. and Singru, P.M" An Integrated Computational Approach for determining the Elastic Properties of Boron Nitride Nanotubes", International Journal of Mechanics and Materials in Design, March 2015, Volume 11, Issue 1, pp 1-14 (In press, doi: 10.1007/s10999-014-9262-1) (Impact Factor= 1.926) (citations=19) (SCI and scopus)

23. Dillip Kumar Mohanty and P M Singru, " Fouling analysis of a shell & tube heat exchanger using local linear wavelet neural network", International Journal of Heat and Mass Transfer, Elsevier. Volume 77, October 2014, Pages 946–955 (Impact Factor= 2.857)(Citation=8)(Scopus)

24. V Vijayaraghavan, A. Garg, C.H Wong, K. Tai, Pravin M. Singru” Investigation of Mechanical Strength of 2-D Nanoscale Structures using a Molecular dynamics based computational intelligence approach”, International Journal of Modern Physics Letters B. 29, pp (1450242-1-18) (2015) [18 pages] DOI: 10.1142/S0217979214502427 (Impact factor = 0.37)

25. Venkatesh Vijayaraghavan, Akhil Garg, Chee How Wong, Kang Tai, K Sumithra, Liang Gao, Pravin  M Singru, “Combined CI-MD approach in formulation of engineering moduli of single layer graphene sheet”, Simulation Modelling Practice and Theory, Volume 48, November 2014, Pages 93–111. (Impact factor = 1.482)(citations=19) (SCI and scopus)

26.    A Garg, V Vijayaraghavan, C H Wong, K Tai, K Sumithra, K Sumithra, Pravin M. Singru, Leehter Yao,”                     Application of artificial intelligence technique for modeling elastic properties of 2-D nanoscale material”,                   Molecular simulation”, Volume 41, Issue 14,pp 1143-1152,  2015 (doi:10.1080/08927022.2014.951351) Taylor          and Francis . (Impact factor = 1.678).(Scopus)

27.   Kiran Mali and Pravin Singru, “On The Use of Greatest Integer Function to Express Material Property Variation in Free Vibration Problem of Simply Supported Square Plates with Square Array of Circular Perforations” Procedia Material Science, 6 ( 2014 ) 409 – 416.

28.   V. Vijayaraghavan, A. Garg, C. H. Wong, K. Tai, K. Pravin M. Singru, and L. Gao, “On the Study of Machining Characteristics of 2-D Nanoscale Material”, Nanoscience Nanotechnology Letters. 6, 1079-1086 (2014) (IF=1.44)

29.   A Garg, V Vijayaraghavan, K Tai, Pravin M. Singru, L. Gao and K.S. Sangwan, “An ensemble evolutionary approach in evaluation of surface finish reduction of vibratory finishing process”, Engineering Computations, Vol. 32 and Issue 5, pp. 1214 – 1229, 2015 (IF=1.206)

30.   P. Kousik, Pravin M Singru and Narayan Manjrekar,” Comparing PID and H-∞ Controllers on a 2-DoF Nonlinear Quarter Car Suspension System” Journal of Vibro-Engineering, Vol 8, pp 3977-3990. (Impact factor = 0.384) (SCI and scopus)

31. Vijayaraghavan, V., Garg, A., Wong, C.H., Tai, K., Singru, M. Pravin, Gao L and Sangwan S. K. "A Molecular Dynamics Based Artificial Intelligence Approach for Characterizing Thermal Transport in Nanoscale Material", Thermochimica Acta. Vol. 594, 20 October 2014, pp. 39-49. (Impact factor = 1.938) (SCI and scopus)

32. A. Garg , V. Vijayaraghavan ,Jasmine Siu Lee Lam , Pravin M Singru, Liang Gao, “A Molecular Simulation Based Computational Intelligence Study of a 2 Nano-machining Process with Implications on its Environmental 3 Performance”, Swarm and Evolutionary Computation. Volume 21, April 2015, Pages 54–63. (http://www.sciencedirect.com/science/article/pii/S2210650215000115)(Impact Factor =2.963)

33.   Nikilesh Krishnakumar, Vishal Jain , Pravin M. Singru, “Development of predictive model for vibro-acoustic condition monitoring of lathe”, Journal of Vibroengineering, Vol. 17, Issue 1, 2015, p. 229‑242(Impact factor = 0.384) (SCI and scopus)

34.  Akhi Garg, V Vijayaraghavan, Kang Tai, Pravin M Singru, Vishal jain, Nikilesh Kumar,“Model Development based on Evolutionary framework for condition monitoring of a lathe machine”, Measurement , Vol 95 (2015), pp 95-110 (Impact Factor 1.742) (ESCI and scopus)

35. Pravin Singru,et al., "Development of an Experimental Model for a Magnetorheological Damper Using Artificial Neural Networks (Levenberg-Marquardt Algorithm)," Advances in Acoustics and Vibration, vol. 2016, Article ID 7027259, 6 pages, 2016. doi:10.1155/2016/7027259. (SCI)

36. Akshay Sundar, Hancel P. V., Pravin Singru, Radhika Vathsan "Acoustic analysis and characterization of Indian musical instrument: Ghumot." Journal of Measurements in Engineering, Vol. 4, Issue 3, 2016, p. 122‑132.

37.  Pravin Singru, Akshay Sundar, Hancel P. V.,Radhika Vathsan , “Study of Sarasvati Veena – a South Indian musical instrument using its vibro-acoustic signatures”, Journal of Vibro Engineering, Vol. 18, Issue 5, August 2016, pp 3362-3368. (Impact factor = 0.384) (SCI and scopus)

38. Pravin Singru, et al, “ Development of an experimental model for a Magneto-Rheological (MR) Damper using Genetic Programming”, accepted for publication in Journal of Vibro Engineering on February 24, 2017. (Impact factor = 0.384) (SCI and scopus)

BOOK CHAPTERS

1.                    1.  Pravin M. Singru, Vishal Jain, Nikilesh Krishnakumar, A. Garg, K. Tai, and V. Vijayaraghavan, “ Gene                      Expression Programming in Nanotechnology Applications”, Evolutionary Computation Techniques and                      Applications, Editors: Ashish M. Gujarathi, B. V. Babu, Apple Academic Press, Feb 2016. 

   2  K .V. R. B. Prasad and P. M. Singru, “Performance Improvement of NSGA-II Algorithm by Modifying Crossover Probability Distribution” , Evolutionary Computation Techniques and Applications, Editors: Ashish M. Gujarathi, B. V. Babu, Apple Academic Press, Feb 2016.

    3. Kiran D. Mali,  Pravin M. Singru. "An analytical model to determine fundamental frequency of free vibration of perforated plate by using greatest integer functions to express non homogeneity"  Manufacturing Science and Technology III, Edited by R. Sivakumar, Trans Tech. Publications, Kreuzstrasse 10, 8635 Durnten-Zurich, Switzerland, December, 2012., ISBN-13: 978-3-03785-563-8

 

RESEARCH PAPERS IN NATIONAL/ INTERNATIONAL  CONFERENCES HELD IN INDIA:

 

  1. P.M.Singru et. al. 1988 Proceedings of IPPROM-88 organized by Visvesvaraya Regional College of Engineering, Nagpur, Qualitative Analysis of Manual Handling Operations of a Winding Machine and Suggestion of Robot as an Improved Alternative.
  2. P.M.Singru et. al. 1997 Proceedings of National Seminar on Emerging Trends in Design Engineering, Organized by Institution of Engineers (I), at M.N.R.Engineering College, Allahabad (India), I26–I36 . Computer Aided Design of Mechanical Systems.
  3. P.M. Singru et.al.1998 Proceedings of National Conference on Intelligent Manufacturing Systems – A Technology Watch, Organized by Coimbatore Institute of Technology, Coimbatore, (India) , D1.1-D1.8 Computer Aided Design of Mechanical Systems (CADOMS) Ver. 3.0.
  4. P.M.Singru et. al. 1999 Proceedings of National Seminar on Technology Management Beyond 2000 , Organised by Gramin Polytechnic, Nanded on November 23-24, 1999 pp 132-134. Genetic Algorithm Used for Finding the Global Maxima/ Minima of a Vibration Analysis Problem.
  5. P.M.Singru et. al. 2000 Proceedings of National Conference on Industrial Problems in Machines and Mechanisms Organized by Priyadarshini College of Engineering and Architecture, Nagpur, 57-64 Load Variation of the Arms of the Belt Drive Pulley.
  6. P.M.Singru et. al. 2000 Proceedings of National Conference on Industrial Problems in Machines and Mechanisms Organized by Priyadarshini College of Engineering and Architecture, Nagpur, 84-90  Dynamic Stress Analysis of Arms of Belt Drive Pulley Using Finite Element Method.
  7. P.M.Singru and J.P.Modak 2000 Proceedings of the National Symposium on Recent Advances in Experimental Mechanics, organized by Indian Institute of Technology, Kanpur, Proposed Experimental Setup for Studying Dynamic and Vibration Response of Belt Drive Pulley.
  8. P.M.Singru et. al. 2000 Proceedings of National Seminar on Basic Sciences – Engineering Forte Organised by Chandrapur Engineering College , Chandrapur on January 28, 2000, pp 61-66. Genetic Algorithm : A New Numerical Method, Used for Solving Vibration Analysis Problem
  9. P.M.Singru et. al. 2000 Proceedings of National Seminar on Basic Sciences – Engineering Forte Organised by Chandrapur Engineering College , Chandrapur on January 28, 2000, pp 67-71. Numerica 2000 : A software Developed for Solving Numerical Methods and Matrix Problems
  10. P.M.Singru et. al. 2000 Proceedings of National Seminar on Basic Sciences – Engineering Forte Organised by Chandrapur Engineering College , Chandrapur on January 28, 2000, pp 79-82 Differential Calculus : An Expert System Software.
  11. P.M.Singru et. al. 2000 Proceedings of National Seminar on Basic Sciences – Engineering Forte Organised by Chandrapur Engineering College , Chandrapur on January 28, 2000, pp 83-87 Softgraph 2000 : A New Software for Plotting Graphs.
  12. P.M.Singru and M.M.Raghuwanshi 2004 Proceedings of National Conference on Emerging Trends in Mechanical Engineering, Organised by K.D.K. Engg. College, Nagpur 0n Feb 05-06, 2004. Formulation of Optimum Design of Finger Type Clutch Using Genetic Algorithms.
  13. P.M.Singru and M.R. Deshmukh 2005 Proceedings of National Conference on Machines and Mechanisms 2005, organized by I.I.T., Guwahati in December 2005. Vibration Based Condition Monitoring of Induced Draught Fan: Some Interesting Findings.
  14. P.M.Singru and M.R. Deshmukh 2005 Proceedings of National Conference on Machines and Mechanisms 2005, organized by I.I.T., Guwahati in December 2005. Simple Mechanics to Explain 0.5X Component in 210 MW Turbo Generator Set.
  15. P.M. singru & KVRB Prasad"Optimum Design of Electrical Machines using Genetic Algorithm: An Overview and Future Research Paths" presented in "National Conference on Recent Advances in Electrical Engineering - (NCRAEE-2007). The conference was organised by Vignan's Instituteof Information Technology, Visakhapatnam, A.P., INDIA. Pp 4-26 to 4-33, 9th and 10th March, 2007.
  16. Kiran D. Mali and   Pravin M. Singru, "An Analytical Model to Determine Fundamental Frequency of Free Vibration of Perforated Plate by Using Greatest Integer Functions to Express Non Homogeneity", 3rd International Conference on Manufacturing Science and Technology - ICMST 2012, August 18 - 19, 2012, New Delhi, India (accepted for publication and presentation)
  17. Pravin M. Singru & D. Srivastava "Design and Computational Analysis of MEMS based Direct Methanol Fuel Cell", COMSOL Conference Bangalore , 3-4, November, 2012
  18. Kiran D. Mali, Parth S. Joshi, Pravin M. Singru, "Free vibration analysis of simply supported square plates with square perforation pattern of square holes" accepted for 57th ISTAM Congress an International meet to be held in DIAT, Pune on December 17-21-2012.
  19. Kareti V.R.B. Prasad and Pravin M. Singru "Optimum Design of Turbo-Alternator Using Modified NSGA-II Algorithm" , accepted for presentation & publication in Seventh International Conference on Bio-Inspired Computing: Theories and Application, December 14 - 16, 2012 to be held at ABV IIITM, Gwalior.
  20. Pravin M. Singru & D. Srivastava "Design and Computational Analysis of MEMS based Direct Methanol Fuel Cell", COMSOL Conference Bangalore , 3-4, November, 2012.

           21.. K.V.R.B. Prasad and Pravin M. Singru, International Journal of Electrical, Computer, and Systems                            Engineering, WASET accepted for International Conference and will be published in journal after                               presentation “Evolution of New Design Principals of Turbo-Alternator Design using Genetic Algorithm,”

22. K.V.R.B. Prasad and Pravin M. Singru, 2010, Proceedings of ITC-2010 International Conference on Recent Trends in Information, Telecommunication and Computing - 2010 held at Kochi, Kerala on March 12-13, 2010, pp, 150-158, Identifying the Optimum Design of Turbo-Alternator Using Different Multi-objective Optimization Algorithms.

24.          23. Raghavendra D. Naik, Pravin M. Singru, Nonlinear Dynamics and Chaos Control of Vehicle Suspension System, Topical Problems in Solid Mechanics, BITS-Pilani K K Birla Goa Campus, December 2009, Pages 420-427. 25. K.V.R.B. Prasad & Pravin M. Singru “ “Performance of Lognormal Probability Distribution in Crossover Operator of NSGA-II Algorithm” published in “8th International Conference on Simulated Evolution And Learning ” held at IIT-Kanpur, Kanpur from 1st to 4th of December, 2010,SEAL 2010 proceedings, Code: LNCS 6457, pp. 514-522, 2010.

26. 24. Singh, V. and Singru, P.M. (2011), “A New Methodology to Facilitate Restructuring in Manufacturing Systems”, Proc. of the International Conference on Sustainable Manufacturing: Issues, Trends and Practices (ICSM – 2011), BITS, Pilani, India, November 10-12, 2011, pp. 163-169.

25. Anish D. Shah, Nishant R. Chokhani, Rohit S. Lad, Kiran D. Mali and Pravin M. Singru ” Effect of thermal gradient on free vibration of rectangular plate with thickness varying exponentially in one direction” , The 5th Asia and Pasific Young Researchers & Graduates symposium in Current challenges in structural engineering, held in MNIT Jaipur on October 15-16, 2013.
26. R. D. Naik & P. M. Singru, “Formulation of Squeeze Film Damping Forces on Micro Resonator Considering Electrostatic Actuation Effects”, International Conference on Emerging Technologies-Micro to Nano 2013 Goa, 113-114.
27.  Akash Aishwarya, R. D. Naik & P. M. Singru, “Dynamics of Capacitive Dual Backplate Mems     Microphone” , International Conference on Perspectives in Nonlinear Dynamics, TIFR-UOH, Hyderabad July 15-18, 2013.

29. 28. Ashwin PK.P., R.D. naik and P.M. Singru,”Formulation of Squeeze Film damping Forces on Micro-Resonator Considering Electrostatic Acuation Effects” International Conference on Emerging Technologies Micro to Nano-2013, held in BITS Pilani Goa campus , 23-24 February 2013, pp 113-114

30. 29. Samarth Mathur, Ayush Raizada, Pravin Singru and Radhika Vathsan, “Experimental acoustic analysis of Sarasvati Veena”, paper no. 98,iNACOMM 2015, held at IIT Kanpur on December 16-19, 2015

31. 30. Pravin Singru, Ayush Raizada and Vishnuvardhan Krishnakumar,” A study of various methods for system identification of continuous systems”, paper no. 59, iNACOMM 2015, held at IIT Kanpur on December 16-19, 2015.

32.   32Paavni Shukla, Pravin M Singru and Narayan Manjrekar,” A Study of H infinity and H2 synthesis for Active Vibration Control”, accepted for publication in 4th International Conference on Advances in Control and Optimization of Dynamical Systems to be held in NIT Trichy on Feb 1-5, 2016 , published by Science direct (http://www.sciencedirect.com/science/article/pii/S2405896316301252)

 34. Pravin Singru, Ayush Raizada , Vishnuvardhan Krishnakumar, Akhil Garg,“Modeling of a Magneto-Rheological (MR)                Damper using Genetic Programming” presented in XII IPRoMM NATIONAL WORKSHOP ON INDUSTRIAL             PROBLEMS ON MACHINES & MECHANISMS during December 22-23, 2016 held at VNIT, Nagpur.                   (Won prize as third best paper)
 
RESEARCH PAPERS IN INTERNATIONAL CONFERENCES ABROAD

 

  1. P.M. Singru and Anish Alias 2000, Proceedings of International Conference on   Intelligent Flexible Autonomous Manufacturing System Towards Rapid Design Exploration and Optimization, held at Coimbatore Institute of Technology, Coimbatore (India). Computer Aided Design of Machines.
  2. P.M. Singru et.al 2000, Proceedings of 3rd International Conference on Shell and Spatial Structures , Organized by National Technical University of Athens , Greece, Dynamic and Vibration Response of Arm of a Belt Drive Pulley - Part- I.
  3. P.M. Singru et.al 2000, Proceedings of 3rd International Conference on Shell and Spatial Structures, Organized by National Technical University of Athens, Greece.Computer Aided Design and Visualization of Machine Elements: An Expert System  Approach .

4.     P.M. Singru et. al. 2000  Proceedings of 3rd International Conference on Shell and Spatial Structures , Organized by National Technical University of Athens , Greece. Effect of Different Parameters on the Dynamic Stresses Developed in Helical Gear.

5.       P.M. Singru 2000 Proceedings of 16th International Conference on CAD/CAM, Robotics and Factories of Future, Organised by University of West Indies, St. Augustine, Trinidad, WI. Computer Aided Design, Drafting, Analysis and Manufacture of Machine Elements.

6.      P.M.Singru and M.M. Raghuwanshi 2004 International Conference on Modelling and Optimization Organised by Centro de Modelaciony Computacion Cientifica, at Universidad de La Frontera, Temuco, Chile on January 19-22, 2004. Formulation of Multi-objective Optimum Design Problem of Finger Type Clutch Using Multi-objective Optimization.

7.       P.M. Singru ,et.al.,2004 International Conference Complex 2004 held on Dec   09-11, 2004 at Craine , Austrelia. Synthesis of Modified Simulated Binary Crossover with Lognormal Distribution.

       8. Raghavendra D. Naik, Pravin M. Singru,” Stability of a Nonlinear 2 Degree-of-Freedom Vehicle System                with Multiple Time-delays”, 15th International Conference on Experimental Mechanics Porto, 22-27 July 20
        9. Kiran D. Mali and   Pravin M. Singru ,” Free Vibration Analysis of Perforated Plate by using Unit Step                      Functions to Express Non homogeneity” , 15th International Conference on Experimental Mechanics Porto,             22-27 July 2012 (accepted for publication and presentation)
      10. Raghavendra D. Naik, Pravin M. Singru, “Heteroclinic bifurcation of a nonlinear oscillator with multiple                time-delays”, International Conference on Automation, Mechatronics and Robotics (ICAMR'2012) held on             August 11-12, 2012 in Phuket (Thailand). 
      11. Allen Anilkumar and Pravin M Singru, "Seat Design and Control of Passenger Vibrations in a Quarter Car          Model Using h_∞ Controller", 11th International Conference on Recent Advances in Structural Dynamics, 1 – 3       July 2013, held at University of Pisa, Italy.
      12. P.M. Singru, V. Jain, N. Kumar, S. Habbu, "Development Of Predictive Model Using Machine Learning                Algorithm For Vibro-acoustic Condition Monitoring of Lathe", accepted for publication in 14th ASME                      International Mechanical Engineering Congress and Exposition, to be held on Nov. 14-20, 2014.
      13. P.M. Singru, et.al.,” Design Of MEMS Based Piezo-resistive Sensor For Measuring Pressure In                               Endo-tracheal Tube” ASME's International Mechanical Engineering Congress and Exposition (IMECE) held             in Housten, USA, Nov-13-19,2015.(paper accepted)
      14. Pravin Singru, Krishnakuma Vishnuvardhan, Raizada Ayush” Bearing failure prediction using fast fourier                transform, wigner-ville distribution and modified Poincare mapping” accepted for publication in 23rd                         International Congress on Sound and Vibration (ICSV23) held in Athens, Greece, from 10 to 14 July 2016.
      15. Singru Pravin, Vathsan Radhika, Sundar Akshay, Hancel PV, “Study of Sarasvati veena-   a south indian                   musical instruments using its vibro-acoustic signatures” accepted for publication in 23rd International                      Congress on Sound and Vibration (ICSV23) held in Athens, Greece, from 10 to 14 July 2016.
      16. Singru Pravin, Vathsan Radhika, Sundar Akshay, Hancel PV, “Vibro-Acoustic study of the Ethnic Indian             Musical Instrument Ghumot and determination of number of unique tones”, accepted for publication in 23rd                International Congress on Sound and Vibration (ICSV23) held in Athens, Greece, from 10 to 14 July 2016.

17.

 

Quick Links

    An institution deemed to be a University estd. vide Sec.3 of the UGC Act,1956 under notification # F.12-23/63.U-2 of Jun 18,1964

    © 2017 Centre for Software Development,SDET Unit, BITS-Pilani, India.

    Designed and developed by fractal | ink design studios